Merge tag 'linux-kselftest-kunit-fixes-5.11-rc3' of git://git.kernel.org/pub/scm...
[linux/fpc-iii.git] / Documentation / devicetree / bindings / display / rockchip / analogix_dp-rockchip.txt
blob43561584c13af152655a7afb9dd2ddc65574ad76
1 Rockchip RK3288 specific extensions to the Analogix Display Port
2 ================================
4 Required properties:
5 - compatible: "rockchip,rk3288-dp",
6               "rockchip,rk3399-edp";
8 - reg: physical base address of the controller and length
10 - clocks: from common clock binding: handle to dp clock.
11           of memory mapped region.
13 - clock-names: from common clock binding:
14                Required elements: "dp" "pclk"
16 - resets: Must contain an entry for each entry in reset-names.
17           See ../reset/reset.txt for details.
19 - pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
20 - pinctrl-0: pin-control mode. should be <&edp_hpd>
22 - reset-names: Must include the name "dp"
24 - rockchip,grf: this soc should set GRF regs, so need get grf here.
26 - ports: there are 2 port nodes with endpoint definitions as defined in
27   Documentation/devicetree/bindings/media/video-interfaces.txt.
28     Port 0: contained 2 endpoints, connecting to the output of vop.
29     Port 1: contained 1 endpoint, connecting to the input of panel.
31 Optional property for different chips:
32 - clocks: from common clock binding: handle to grf_vio clock.
34 - clock-names: from common clock binding:
35                Required elements: "grf"
37 For the below properties, please refer to Analogix DP binding document:
38  * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
39 - phys (required)
40 - phy-names (required)
41 - hpd-gpios (optional)
42 - force-hpd (optional)
43 -------------------------------------------------------------------------------
45 Example:
46         dp-controller: dp@ff970000 {
47                 compatible = "rockchip,rk3288-dp";
48                 reg = <0xff970000 0x4000>;
49                 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
50                 clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
51                 clock-names = "dp", "pclk";
52                 phys = <&dp_phy>;
53                 phy-names = "dp";
55                 rockchip,grf = <&grf>;
56                 resets = <&cru 111>;
57                 reset-names = "dp";
59                 pinctrl-names = "default";
60                 pinctrl-0 = <&edp_hpd>;
63                 ports {
64                         #address-cells = <1>;
65                         #size-cells = <0>;
66                         edp_in: port@0 {
67                                 reg = <0>;
68                                 #address-cells = <1>;
69                                 #size-cells = <0>;
70                                 edp_in_vopb: endpoint@0 {
71                                         reg = <0>;
72                                         remote-endpoint = <&vopb_out_edp>;
73                                 };
74                                 edp_in_vopl: endpoint@1 {
75                                         reg = <1>;
76                                         remote-endpoint = <&vopl_out_edp>;
77                                 };
78                         };
80                         edp_out: port@1 {
81                                 reg = <1>;
82                                 #address-cells = <1>;
83                                 #size-cells = <0>;
84                                 edp_out_panel: endpoint {
85                                         reg = <0>;
86                                         remote-endpoint = <&panel_in_edp>
87                                 };
88                         };
89                 };
90         };
92         pinctrl {
93                 edp {
94                         edp_hpd: edp-hpd {
95                                 rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>;
96                         };
97                 };
98         };