Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt

   1 Binding for Qualcomm  Atheros AR7xxx/AR9xxx DDR controller
   2
   3 The DDR controller of the AR7xxx and AR9xxx families provides an interface
   4 to flush the FIFO between various devices and the DDR. This is mainly used
   5 by the IRQ controller to flush the FIFO before running the interrupt handler
   6 of such devices.
   7
   8 Required properties:
   9
  10 - compatible: has to be "qca,<soc-type>-ddr-controller",
  11   "qca,[ar7100|ar7240]-ddr-controller" as fallback.
  12   On SoC with PCI support "qca,ar7100-ddr-controller" should be used as
  13   fallback, otherwise "qca,ar7240-ddr-controller" should be used.
  14 - reg: Base address and size of the controller's memory area
  15 - #qca,ddr-wb-channel-cells: Specifies the number of cells needed to encode
  16                              the write buffer channel index, should be 1.
  17
  18 Example:
  19
  20         ddr_ctrl: memory-controller@18000000 {
  21                 compatible = "qca,ar9132-ddr-controller",
  22                                 "qca,ar7240-ddr-controller";
  23                 reg = <0x18000000 0x100>;
  24
  25                 #qca,ddr-wb-channel-cells = <1>;
  26         };
  27
  28         ...
  29
  30         interrupt-controller {
  31                 ...
  32                 qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
  33                 qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
  34                                         <&ddr_ctrl 0>, <&ddr_ctrl 1>;
  35         };