Merge tag 'linux-kselftest-kunit-fixes-5.11-rc3' of git://git.kernel.org/pub/scm...
[linux/fpc-iii.git] / Documentation / devicetree / bindings / mfd / rn5t618.txt
blob16778ea00dbcd2362015eac23810b190533c7de8
1 * Ricoh RN5T567/RN5T618 PMIC
3 Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which
4 integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
5 GPIOs, and a watchdog timer. It can be controlled through an I2C interface.
6 The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
7 fuel gauge, and an ADC.
8 The RC5T619 additionnally includes USB charger detection and an RTC.
10 Required properties:
11  - compatible: must be one of
12                 "ricoh,rn5t567"
13                 "ricoh,rn5t618"
14                 "ricoh,rc5t619"
15  - reg: the I2C slave address of the device
17 Optional properties:
18  - interrupts: interrupt mapping for IRQ
19    See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
20  - system-power-controller:
21    See Documentation/devicetree/bindings/power/power-controller.txt
23 Sub-nodes:
24  - regulators: the node is required if the regulator functionality is
25    needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
26    (RN5T567/RC5T619), LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, LDO8,
27    LDO9, LDO10, LDORTC1 and LDORTC2.
28    LDO7-10 are specific to RC5T619.
29    The common bindings for each individual regulator can be found in:
30    Documentation/devicetree/bindings/regulator/regulator.txt
32 Example:
34         pmic@32 {
35                 compatible = "ricoh,rn5t618";
36                 reg = <0x32>;
37                 interrupt-parent = <&gpio5>;
38                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
39                 system-power-controller;
41                 regulators {
42                         DCDC1 {
43                                 regulator-min-microvolt = <1050000>;
44                                 regulator-max-microvolt = <1050000>;
45                         };
47                         DCDC2 {
48                                 regulator-min-microvolt = <1175000>;
49                                 regulator-max-microvolt = <1175000>;
50                         };
51                 };
52         };