Documentation/devicetree/bindings/mtd/st-fsm.txt

   1 * ST-Microelectronics SPI FSM Serial (NOR) Flash Controller
   2
   3 Required properties:
   4   - compatible : Should be "st,spi-fsm"
   5   - reg        : Contains register's location and length.
   6   - reg-names  : Should contain the reg names "spi-fsm"
   7   - interrupts : The interrupt number
   8   - pinctrl-0  : Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
   9
  10 Optional properties:
  11   - st,syscfg          : Phandle to boot-device system configuration registers
  12   - st,boot-device-reg : Address of the aforementioned boot-device register(s)
  13   - st,boot-device-spi : Expected boot-device value if booted via this device
  14
  15 Example:
  16         spifsm: spifsm@fe902000{
  17                 compatible         = "st,spi-fsm";
  18                 reg                =  <0xfe902000 0x1000>;
  19                 reg-names          = "spi-fsm";
  20                 pinctrl-0          = <&pinctrl_fsm>;
  21                 st,syscfg          = <&syscfg_rear>;
  22                 st,boot-device-reg = <0x958>;
  23                 st,boot-device-spi = <0x1a>;
  24         };
  25