1 Microchip LAN78xx Gigabit Ethernet controller
3 The LAN78XX devices are usually configured by programming their OTP or with
4 an external EEPROM, but some platforms (e.g. Raspberry Pi 3 B+) have neither.
5 The Device Tree properties, if present, override the OTP and EEPROM.
8 - compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850".
10 The MAC address will be determined using the optional properties
11 defined in ethernet.txt.
13 Optional properties of the embedded PHY:
14 - microchip,led-modes: a 0..4 element vector, with each element configuring
15 the operating mode of an LED. Omitted LEDs are turned off. Allowed values
16 are defined in "include/dt-bindings/net/microchip-lan78xx.h".
20 /* Based on the configuration for a Raspberry Pi 3 B+ */
23 compatible = "usb424,2514";
29 compatible = "usb424,2514";
34 ethernet: ethernet@1 {
35 compatible = "usb424,7800";
37 local-mac-address = [ 00 11 22 33 44 55 ];
40 #address-cells = <0x1>;
42 eth_phy: ethernet-phy@1 {
44 microchip,led-modes = <
45 LAN78XX_LINK_1000_ACTIVITY
46 LAN78XX_LINK_10_100_ACTIVITY