arch/mips/sni/time.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include <linux/types.h>
   3 #include <linux/i8253.h>
   4 #include <linux/interrupt.h>
   5 #include <linux/irq.h>
   6 #include <linux/smp.h>
   7 #include <linux/time.h>
   8 #include <linux/clockchips.h>
   9
  10 #include <asm/sni.h>
  11 #include <asm/time.h>
  12
  13 #define SNI_CLOCK_TICK_RATE     3686400
  14 #define SNI_COUNTER2_DIV        64
  15 #define SNI_COUNTER0_DIV        ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
  16
  17 static int a20r_set_periodic(struct clock_event_device *evt)
  18 {
  19         *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34;
  20         wmb();
  21         *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
  22         wmb();
  23         *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8;
  24         wmb();
  25
  26         *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4;
  27         wmb();
  28         *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV;
  29         wmb();
  30         *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8;
  31         wmb();
  32         return 0;
  33 }
  34
  35 static struct clock_event_device a20r_clockevent_device = {
  36         .name                   = "a20r-timer",
  37         .features               = CLOCK_EVT_FEAT_PERIODIC,
  38
  39         /* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */
  40
  41         .rating                 = 300,
  42         .irq                    = SNI_A20R_IRQ_TIMER,
  43         .set_state_periodic     = a20r_set_periodic,
  44 };
  45
  46 static irqreturn_t a20r_interrupt(int irq, void *dev_id)
  47 {
  48         struct clock_event_device *cd = dev_id;
  49
  50         *(volatile u8 *)A20R_PT_TIM0_ACK = 0;
  51         wmb();
  52
  53         cd->event_handler(cd);
  54
  55         return IRQ_HANDLED;
  56 }
  57
  58 /*
  59  * a20r platform uses 2 counters to divide the input frequency.
  60  * Counter 2 output is connected to Counter 0 & 1 input.
  61  */
  62 static void __init sni_a20r_timer_setup(void)
  63 {
  64         struct clock_event_device *cd = &a20r_clockevent_device;
  65         unsigned int cpu = smp_processor_id();
  66
  67         cd->cpumask             = cpumask_of(cpu);
  68         clockevents_register_device(cd);
  69         if (request_irq(SNI_A20R_IRQ_TIMER, a20r_interrupt,
  70                         IRQF_PERCPU | IRQF_TIMER, "a20r-timer", cd))
  71                 pr_err("Failed to register a20r-timer interrupt\n");
  72 }
  73
  74 #define SNI_8254_TICK_RATE        1193182UL
  75
  76 #define SNI_8254_TCSAMP_COUNTER   ((SNI_8254_TICK_RATE / HZ) + 255)
  77
  78 static __init unsigned long dosample(void)
  79 {
  80         u32 ct0, ct1;
  81         volatile u8 msb;
  82
  83         /* Start the counter. */
  84         outb_p(0x34, 0x43);
  85         outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40);
  86         outb(SNI_8254_TCSAMP_COUNTER >> 8, 0x40);
  87
  88         /* Get initial counter invariant */
  89         ct0 = read_c0_count();
  90
  91         /* Latch and spin until top byte of counter0 is zero */
  92         do {
  93                 outb(0x00, 0x43);
  94                 (void) inb(0x40);
  95                 msb = inb(0x40);
  96                 ct1 = read_c0_count();
  97         } while (msb);
  98
  99         /* Stop the counter. */
 100         outb(0x38, 0x43);
 101         /*
 102          * Return the difference, this is how far the r4k counter increments
 103          * for every 1/HZ seconds. We round off the nearest 1 MHz of master
 104          * clock (= 1000000 / HZ / 2).
 105          */
 106         /*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/
 107         return (ct1 - ct0) / (500000/HZ) * (500000/HZ);
 108 }
 109
 110 /*
 111  * Here we need to calibrate the cycle counter to at least be close.
 112  */
 113 void __init plat_time_init(void)
 114 {
 115         unsigned long r4k_ticks[3];
 116         unsigned long r4k_tick;
 117
 118         /*
 119          * Figure out the r4k offset, the algorithm is very simple and works in
 120          * _all_ cases as long as the 8254 counter register itself works ok (as
 121          * an interrupt driving timer it does not because of bug, this is why
 122          * we are using the onchip r4k counter/compare register to serve this
 123          * purpose, but for r4k_offset calculation it will work ok for us).
 124          * There are other very complicated ways of performing this calculation
 125          * but this one works just fine so I am not going to futz around. ;-)
 126          */
 127         printk(KERN_INFO "Calibrating system timer... ");
 128         dosample();     /* Prime cache. */
 129         dosample();     /* Prime cache. */
 130         /* Zero is NOT an option. */
 131         do {
 132                 r4k_ticks[0] = dosample();
 133         } while (!r4k_ticks[0]);
 134         do {
 135                 r4k_ticks[1] = dosample();
 136         } while (!r4k_ticks[1]);
 137
 138         if (r4k_ticks[0] != r4k_ticks[1]) {
 139                 printk("warning: timer counts differ, retrying... ");
 140                 r4k_ticks[2] = dosample();
 141                 if (r4k_ticks[2] == r4k_ticks[0]
 142                     || r4k_ticks[2] == r4k_ticks[1])
 143                         r4k_tick = r4k_ticks[2];
 144                 else {
 145                         printk("disagreement, using average... ");
 146                         r4k_tick = (r4k_ticks[0] + r4k_ticks[1]
 147                                    + r4k_ticks[2]) / 3;
 148                 }
 149         } else
 150                 r4k_tick = r4k_ticks[0];
 151
 152         printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick,
 153                 (int) (r4k_tick / (500000 / HZ)),
 154                 (int) (r4k_tick % (500000 / HZ)));
 155
 156         mips_hpt_frequency = r4k_tick * HZ;
 157
 158         switch (sni_brd_type) {
 159         case SNI_BRD_10:
 160         case SNI_BRD_10NEW:
 161         case SNI_BRD_TOWER_OASIC:
 162         case SNI_BRD_MINITOWER:
 163                 sni_a20r_timer_setup();
 164                 break;
 165         }
 166         setup_pit_timer();
 167 }