2 * File: sound/soc/blackfin/bf5xx-ad73311.c
3 * Author: Cliff Cai <Cliff.Cai@analog.com>
5 * Created: Thur Sep 25 2008
6 * Description: Board driver for ad73311 sound chip
9 * Copyright 2008 Analog Devices Inc.
11 * Bugs: Enter bugs at http://blackfin.uclinux.org/
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, see the file COPYING, or write
25 * to the Free Software Foundation, Inc.,
26 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
29 #include <linux/module.h>
30 #include <linux/moduleparam.h>
31 #include <linux/device.h>
32 #include <linux/delay.h>
33 #include <linux/gpio.h>
35 #include <sound/core.h>
36 #include <sound/pcm.h>
37 #include <sound/soc.h>
38 #include <sound/pcm_params.h>
40 #include <asm/blackfin.h>
41 #include <asm/cacheflush.h>
44 #include <asm/portmux.h>
46 #include "../codecs/ad73311.h"
47 #include "bf5xx-sport.h"
48 #include "bf5xx-i2s-pcm.h"
50 #if CONFIG_SND_BF5XX_SPORT_NUM == 0
51 #define bfin_write_SPORT_TCR1 bfin_write_SPORT0_TCR1
52 #define bfin_read_SPORT_TCR1 bfin_read_SPORT0_TCR1
53 #define bfin_write_SPORT_TCR2 bfin_write_SPORT0_TCR2
54 #define bfin_write_SPORT_TX16 bfin_write_SPORT0_TX16
55 #define bfin_read_SPORT_STAT bfin_read_SPORT0_STAT
57 #define bfin_write_SPORT_TCR1 bfin_write_SPORT1_TCR1
58 #define bfin_read_SPORT_TCR1 bfin_read_SPORT1_TCR1
59 #define bfin_write_SPORT_TCR2 bfin_write_SPORT1_TCR2
60 #define bfin_write_SPORT_TX16 bfin_write_SPORT1_TX16
61 #define bfin_read_SPORT_STAT bfin_read_SPORT1_STAT
64 #define GPIO_SE CONFIG_SND_BFIN_AD73311_SE
66 static struct snd_soc_card bf5xx_ad73311
;
68 static int snd_ad73311_startup(void)
70 pr_debug("%s enter\n", __func__
);
72 /* Pull up SE pin on AD73311L */
73 gpio_set_value(GPIO_SE
, 1);
77 static int snd_ad73311_configure(void)
79 unsigned short ctrl_regs
[6];
80 unsigned short status
= 0;
83 /* DMCLK = MCLK = 16.384 MHz
84 * SCLK = DMCLK/8 = 2.048 MHz
85 * Sample Rate = DMCLK/2048 = 8 KHz
87 ctrl_regs
[0] = AD_CONTROL
| AD_WRITE
| CTRL_REG_B
| REGB_MCDIV(0) | \
88 REGB_SCDIV(0) | REGB_DIRATE(0);
89 ctrl_regs
[1] = AD_CONTROL
| AD_WRITE
| CTRL_REG_C
| REGC_PUDEV
| \
90 REGC_PUADC
| REGC_PUDAC
| REGC_PUREF
| REGC_REFUSE
;
91 ctrl_regs
[2] = AD_CONTROL
| AD_WRITE
| CTRL_REG_D
| REGD_OGS(2) | \
93 ctrl_regs
[3] = AD_CONTROL
| AD_WRITE
| CTRL_REG_E
| REGE_DA(0x1f);
94 ctrl_regs
[4] = AD_CONTROL
| AD_WRITE
| CTRL_REG_F
| REGF_SEEN
;
95 ctrl_regs
[5] = AD_CONTROL
| AD_WRITE
| CTRL_REG_A
| REGA_MODE_DATA
;
98 snd_ad73311_startup();
101 bfin_write_SPORT_TCR1(TFSR
);
102 bfin_write_SPORT_TCR2(0xF);
105 /* SPORT Tx Register is a 8 x 16 FIFO, all the data can be put to
106 * FIFO before enable SPORT to transfer the data
108 for (count
= 0; count
< 6; count
++)
109 bfin_write_SPORT_TX16(ctrl_regs
[count
]);
111 bfin_write_SPORT_TCR1(bfin_read_SPORT_TCR1() | TSPEN
);
114 /* When TUVF is set, the data is already send out */
115 while (!(status
& TUVF
) && ++count
< 10000) {
117 status
= bfin_read_SPORT_STAT();
120 bfin_write_SPORT_TCR1(bfin_read_SPORT_TCR1() & ~TSPEN
);
124 if (count
>= 10000) {
125 printk(KERN_ERR
"ad73311: failed to configure codec\n");
131 static int bf5xx_probe(struct platform_device
*pdev
)
134 if (gpio_request(GPIO_SE
, "AD73311_SE")) {
135 printk(KERN_ERR
"%s: Failed ro request GPIO_%d\n", __func__
, GPIO_SE
);
139 gpio_direction_output(GPIO_SE
, 0);
141 err
= snd_ad73311_configure();
148 static int bf5xx_ad73311_hw_params(struct snd_pcm_substream
*substream
,
149 struct snd_pcm_hw_params
*params
)
151 struct snd_soc_pcm_runtime
*rtd
= substream
->private_data
;
152 struct snd_soc_dai
*cpu_dai
= rtd
->cpu_dai
;
155 pr_debug("%s rate %d format %x\n", __func__
, params_rate(params
),
156 params_format(params
));
158 /* set cpu DAI configuration */
159 ret
= snd_soc_dai_set_fmt(cpu_dai
, SND_SOC_DAIFMT_DSP_A
|
160 SND_SOC_DAIFMT_NB_NF
| SND_SOC_DAIFMT_CBM_CFM
);
168 static struct snd_soc_ops bf5xx_ad73311_ops
= {
169 .hw_params
= bf5xx_ad73311_hw_params
,
172 static struct snd_soc_dai_link bf5xx_ad73311_dai
[] = {
175 .stream_name
= "AD73311",
176 .cpu_dai_name
= "bfin-i2s.0",
177 .codec_dai_name
= "ad73311-hifi",
178 .platform_name
= "bfin-i2s-pcm-audio",
179 .codec_name
= "ad73311",
180 .ops
= &bf5xx_ad73311_ops
,
184 .stream_name
= "AD73311",
185 .cpu_dai_name
= "bfin-i2s.1",
186 .codec_dai_name
= "ad73311-hifi",
187 .platform_name
= "bfin-i2s-pcm-audio",
188 .codec_name
= "ad73311",
189 .ops
= &bf5xx_ad73311_ops
,
193 static struct snd_soc_card bf5xx_ad73311
= {
194 .name
= "bfin-ad73311",
195 .probe
= bf5xx_probe
,
196 .dai_link
= &bf5xx_ad73311_dai
[CONFIG_SND_BF5XX_SPORT_NUM
],
200 static struct platform_device
*bf5xx_ad73311_snd_device
;
202 static int __init
bf5xx_ad73311_init(void)
206 pr_debug("%s enter\n", __func__
);
207 bf5xx_ad73311_snd_device
= platform_device_alloc("soc-audio", -1);
208 if (!bf5xx_ad73311_snd_device
)
211 platform_set_drvdata(bf5xx_ad73311_snd_device
, &bf5xx_ad73311
);
212 ret
= platform_device_add(bf5xx_ad73311_snd_device
);
215 platform_device_put(bf5xx_ad73311_snd_device
);
220 static void __exit
bf5xx_ad73311_exit(void)
222 pr_debug("%s enter\n", __func__
);
223 platform_device_unregister(bf5xx_ad73311_snd_device
);
226 module_init(bf5xx_ad73311_init
);
227 module_exit(bf5xx_ad73311_exit
);
229 /* Module information */
230 MODULE_AUTHOR("Cliff Cai");
231 MODULE_DESCRIPTION("ALSA SoC AD73311 Blackfin");
232 MODULE_LICENSE("GPL");