Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
[linux/fpc-iii.git] / arch / arm / boot / dts / am335x-sl50.dts
blobf4684c8eaffef22923bd7667f7581efd552fb22b
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
4  */
5 /dts-v1/;
7 #include "am33xx.dtsi"
8 #include <dt-bindings/pwm/pwm.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
11 / {
12         model = "Toby Churchill SL50 Series";
13         compatible = "tcl,am335x-sl50", "ti,am33xx";
15         cpus {
16                 cpu@0 {
17                         cpu0-supply = <&dcdc2_reg>;
18                 };
19         };
21         memory@80000000 {
22                 device_type = "memory";
23                 reg = <0x80000000 0x20000000>; /* 512 MB */
24         };
26         chosen {
27                 stdout-path = &uart0;
28         };
30         leds {
31                 compatible = "gpio-leds";
32                 pinctrl-names = "default";
33                 pinctrl-0 = <&led_pins>;
35                 led0 {
36                         label = "sl50:red:usr0";
37                         gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
38                         default-state = "off";
39                 };
41                 led1 {
42                         label = "sl50:green:usr1";
43                         gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
44                         default-state = "off";
45                 };
47                 led2 {
48                         label = "sl50:red:usr2";
49                         gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
50                         default-state = "off";
51                 };
53                 led3 {
54                         label = "sl50:green:usr3";
55                         gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
56                         default-state = "off";
57                 };
58         };
60         backlight0: disp0 {
61                 compatible = "pwm-backlight";
62                 pinctrl-names = "default";
63                 pinctrl-0 = <&backlight0_pins>;
64                 pwms = <&ehrpwm1 0 500000 PWM_POLARITY_INVERTED>;
65                 brightness-levels = < 0  1  2  3  4  5  6  7  8  9
66                                      10 11 12 13 14 15 16 17 18 19
67                                      20 21 22 23 24 25 26 27 28 29
68                                      30 31 32 33 34 35 36 37 38 39
69                                      40 41 42 43 44 45 46 47 48 49
70                                      50 51 52 53 54 55 56 57 58 59
71                                      60 61 62 63 64 65 66 67 68 69
72                                      70 71 72 73 74 75 76 77 78 79
73                                      80 81 82 83 84 85 86 87 88 89
74                                      90 91 92 93 94 95 96 97 98 99
75                                     100>;
76                 default-brightness-level = <50>;
77                 enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
78                 power-supply = <&vdd_sys_reg>;
79         };
81         backlight1: disp1 {
82                 compatible = "pwm-backlight";
83                 pinctrl-names = "default";
84                 pinctrl-0 = <&backlight1_pins>;
85                 pwms = <&ehrpwm1 1 500000 PWM_POLARITY_INVERTED>;
86                 brightness-levels = < 0  1  2  3  4  5  6  7  8  9
87                                      10 11 12 13 14 15 16 17 18 19
88                                      20 21 22 23 24 25 26 27 28 29
89                                      30 31 32 33 34 35 36 37 38 39
90                                      40 41 42 43 44 45 46 47 48 49
91                                      50 51 52 53 54 55 56 57 58 59
92                                      60 61 62 63 64 65 66 67 68 69
93                                      70 71 72 73 74 75 76 77 78 79
94                                      80 81 82 83 84 85 86 87 88 89
95                                      90 91 92 93 94 95 96 97 98 99
96                                     100>;
97                 default-brightness-level = <50>;
98                 enable-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
99                 power-supply = <&vdd_sys_reg>;
100         };
102         clocks {
103                 compatible = "simple-bus";
104                 #address-cells = <1>;
105                 #size-cells = <0>;
107                 /* audio external oscillator */
108                 audio_mclk_fixed: oscillator@0 {
109                         compatible = "fixed-clock";
110                         #clock-cells = <0>;
111                         clock-frequency  = <24576000>;  /* 24.576MHz */
112                 };
114                 audio_mclk: audio_mclk_gate@0 {
115                         compatible = "gpio-gate-clock";
116                         #clock-cells = <0>;
117                         pinctrl-names = "default";
118                         pinctrl-0 = <&audio_mclk_pins>;
119                         clocks = <&audio_mclk_fixed>;
120                         enable-gpios = <&gpio1 27 0>;
121                 };
122         };
124         panel: lcd_panel {
125                 compatible = "ti,tilcdc,panel";
126                 pinctrl-names = "default";
127                 pinctrl-0 = <&lcd_pins>;
129                 panel-info {
130                         ac-bias = <255>;
131                         ac-bias-intrpt = <0>;
132                         dma-burst-sz = <16>;
133                         bpp = <16>;
134                         fdd = <0x80>;
135                         tft-alt-mode = <0>;
136                         mono-8bit-mode = <0>;
137                         sync-edge = <0>;
138                         sync-ctrl = <1>;
139                         raster-order = <0>;
140                         fifo-th = <0>;
141                 };
143                 display-timings {
144                         native-mode = <&timing0>;
145                         timing0: 960x128 {
146                                 clock-frequency = <18000000>;
147                                 hactive = <960>;
148                                 vactive = <272>;
150                                 hback-porch = <40>;
151                                 hfront-porch = <16>;
152                                 hsync-len = <24>;
153                                 hsync-active = <0>;
155                                 vback-porch = <3>;
156                                 vfront-porch = <8>;
157                                 vsync-len = <4>;
158                                 vsync-active = <0>;
159                         };
160                 };
161         };
163         sound {
164                 compatible = "audio-graph-card";
165                 label = "sound-card";
166                 pinctrl-names = "default";
167                 pinctrl-0 = <&audio_pa_pins>;
169                 widgets = "Headphone", "Headphone Jack",
170                           "Speaker", "Speaker External",
171                           "Line", "Line In",
172                           "Microphone", "Microphone Jack";
174                 routing = "Headphone Jack",     "HPLOUT",
175                           "Headphone Jack",     "HPROUT",
176                           "Amplifier",          "MONO_LOUT",
177                           "Speaker External",   "Amplifier",
178                           "LINE1R",             "Line In",
179                           "LINE1L",             "Line In",
180                           "MIC3L",              "Microphone Jack",
181                           "MIC3R",              "Microphone Jack",
182                           "Microphone Jack",    "Mic Bias";
184                 dais = <&cpu_port>;
186                 pa-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
187         };
189         emmc_pwrseq: pwrseq@0 {
190                 compatible = "mmc-pwrseq-emmc";
191                 pinctrl-names = "default";
192                 pinctrl-0 = <&emmc_pwrseq_pins>;
193                 reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
194         };
196         vdd_sys_reg: regulator@0 {
197                 compatible = "regulator-fixed";
198                 regulator-name = "vdd_sys_reg";
199                 regulator-min-microvolt = <5000000>;
200                 regulator-max-microvolt = <5000000>;
201                 regulator-always-on;
202         };
204         vmmcsd_fixed: fixedregulator0 {
205                 compatible = "regulator-fixed";
206                 regulator-name = "vmmcsd_fixed";
207                 regulator-min-microvolt = <3300000>;
208                 regulator-max-microvolt = <3300000>;
209         };
212 &am33xx_pinmux {
213         pinctrl-names = "default";
214         pinctrl-0 = <&lwb_pins>;
216         audio_pins: pinmux_audio_pins {
217                 pinctrl-single,pins = <
218                         AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
219                         AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
220                         AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
221                         AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
222                         AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
223                 >;
224         };
226         audio_pa_pins: pinmux_audio_pa_pins {
227                 pinctrl-single,pins = <
228                         AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE7)  /* SoundPA_en - mcasp0_aclkr.gpio3_18 */
229                 >;
230         };
232         audio_mclk_pins: pinmux_audio_mclk_pins {
233                 pinctrl-single,pins = <
234                         AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_a11.gpio1_27 */
235                 >;
236         };
238         backlight0_pins: pinmux_backlight0_pins {
239                 pinctrl-single,pins = <
240                         AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7)      /* gpmc_wen.gpio2_4 */
241                 >;
242         };
244         backlight1_pins: pinmux_backlight1_pins {
245                 pinctrl-single,pins = <
246                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7)     /* gpmc_ad10.gpio0_26 */
247                 >;
248         };
250         lcd_pins: pinmux_lcd_pins {
251                 pinctrl-single,pins = <
252                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
253                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
254                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
255                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
256                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
257                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
258                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
259                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
260                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
261                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
262                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
263                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
264                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
265                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
266                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
267                         AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
268                         AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
269                         AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
270                         AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
271                         AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
272                 >;
273         };
275         led_pins: pinmux_led_pins {
276                 pinctrl-single,pins = <
277                         AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)       /* gpmc_a5.gpio1_21 */
278                         AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)       /* gpmc_a6.gpio1_22 */
279                         AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7)       /* gpmc_a7.gpio1_23 */
280                         AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7)       /* gpmc_a8.gpio1_24 */
281                 >;
282         };
284         uart0_pins: pinmux_uart0_pins {
285                 pinctrl-single,pins = <
286                         AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
287                         AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
288                 >;
289         };
291         uart1_pins: pinmux_uart1_pins {
292                 pinctrl-single,pins = <
293                         AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
294                         AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
295                 >;
296         };
298         uart4_pins: pinmux_uart4_pins {
299                 pinctrl-single,pins = <
300                         AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)      /* gpmc_wait0.uart4_rxd */
301                         AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)     /* gpmc_wpn.uart4_txd */
302                 >;
303         };
305         i2c0_pins: pinmux_i2c0_pins {
306                 pinctrl-single,pins = <
307                         AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
308                         AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
309                 >;
310         };
312         i2c2_pins: pinmux_i2c2_pins {
313                 pinctrl-single,pins = <
314                         AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)      /* uart1_ctsn.i2c2_sda */
315                         AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)      /* uart1_rtsn.i2c2_scl */
316                 >;
317         };
319         cpsw_default: cpsw_default {
320                 pinctrl-single,pins = <
321                         /* Slave 1 */
322                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
323                         AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
324                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0)
325                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
326                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
327                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
328                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
329                         AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
330                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
331                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0)
332                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0)
333                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0)
334                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0)
335                 >;
336         };
338         cpsw_sleep: cpsw_sleep {
339                 pinctrl-single,pins = <
340                         /* Slave 1 reset value */
341                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
342                         AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
343                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
344                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
345                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
346                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
347                         AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
348                         AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
349                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
350                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
351                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
352                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
353                         AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
354                 >;
355         };
357         davinci_mdio_default: davinci_mdio_default {
358                 pinctrl-single,pins = <
359                         /* MDIO */
360                         AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
361                         AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
362                         /* Ethernet */
363                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7)       /* Ethernet_nRST - gpmc_ad14.gpio1_14 */
364                 >;
365         };
367         davinci_mdio_sleep: davinci_mdio_sleep {
368                 pinctrl-single,pins = <
369                         /* MDIO reset value */
370                         AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
371                         AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
372                 >;
373         };
375         mmc1_pins: pinmux_mmc1_pins {
376                 pinctrl-single,pins = <
377                         AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE7)             /* uart0_rtsn.gpio1_9 */
378                 >;
379         };
381         emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins {
382                 pinctrl-single,pins = <
383                         AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLUP, MUX_MODE7)        /* gpmc_a4.gpio1_20 */
384                 >;
385         };
387         emmc_pins: pinmux_emmc_pins {
388                 pinctrl-single,pins = <
389                         AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)       /* gpmc_csn1.mmc1_clk */
390                         AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)       /* gpmc_csn2.mmc1_cmd */
391                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad0.mmc1_dat0 */
392                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad1.mmc1_dat1 */
393                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad2.mmc1_dat2 */
394                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad3.mmc1_dat3 */
395                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad4.mmc1_dat4 */
396                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad5.mmc1_dat5 */
397                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad6.mmc1_dat6 */
398                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)        /* gpmc_ad7.mmc1_dat7 */
399                 >;
400         };
402         ehrpwm1_pins: pinmux_ehrpwm1a_pins {
403                 pinctrl-single,pins = <
404                         AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE6)       /* gpmc_a2.ehrpwm1a */
405                         AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6)       /* gpmc_a3.ehrpwm1b */
406                 >;
407         };
409         rtc0_irq_pins: pinmux_rtc0_irq_pins {
410                 pinctrl-single,pins = <
411                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7)     /* gpmc_ad9.gpio0_23 */
412                 >;
413         };
415         spi0_pins: pinmux_spi0_pins {
416                 pinctrl-single,pins = <
417                         AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_MOSI */
418                         AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_MISO */
419                         AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
420                         AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)        /* SPI0_CS0 (NBATTSS) */
421                         AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0)        /* SPI0_CS1 (FPGA_FLASH_NCS) */
422                 >;
423         };
425         lwb_pins: pinmux_lwb_pins {
426                 pinctrl-single,pins = <
427                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7)       /* nKbdInt - gpmc_ad12.gpio1_12 */
428                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7)       /* nKbdReset - gpmc_ad13.gpio1_13 */
429                         AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */
430                         /* PDI Bus - Battery system */
431                         AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7) /* nBattReset  gpmc_a0.gpio1_16 */
432                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7)       /* BattPDIData gpmc_ad15.gpio1_15 */
433                         /* FPGA */
434                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE7)        /* FPGA_DONE - gpmc_ad8.gpio0_22 */
435                         AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */
436                         AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)       /* FPGA_RUN - gpmc_a1.gpio1_17 */
437                         AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */
438                         AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
439                 >;
440         };
443 &i2c0 {
444         status = "okay";
445         pinctrl-names = "default";
446         pinctrl-0 = <&i2c0_pins>;
448         clock-frequency = <400000>;
450         tps: tps@24 {
451                 reg = <0x24>;
452         };
454         rtc0: rtc@68 {
455                 compatible = "dallas,ds1339";
456                 pinctrl-names = "default";
457                 pinctrl-0 = <&rtc0_irq_pins>;
458                 interrupt-parent = <&gpio0>;
459                 interrupts = <23 IRQ_TYPE_EDGE_FALLING>; /* gpio 23 */
460                 wakeup-source;
461                 trickle-resistor-ohms = <2000>;
462                 reg = <0x68>;
463         };
465         eeprom: eeprom@50 {
466                 compatible = "atmel,24c256";
467                 reg = <0x50>;
468         };
470         gpio_exp: mcp23017@20 {
471                 compatible = "microchip,mcp23017";
472                 reg = <0x20>;
473         };
477 &i2c2 {
478         status = "okay";
479         pinctrl-names = "default";
480         pinctrl-0 = <&i2c2_pins>;
482         clock-frequency = <400000>;
484         audio_codec: tlv320aic3106@1b {
485                 status = "okay";
486                 compatible = "ti,tlv320aic3106";
487                 #sound-dai-cells = <0>;
488                 reg = <0x1b>;
489                 ai3x-micbias-vg = <2>;  /* 2.5V */
491                 AVDD-supply = <&ldo4_reg>;
492                 IOVDD-supply = <&ldo4_reg>;
493                 DRVDD-supply = <&ldo4_reg>;
494                 DVDD-supply = <&ldo3_reg>;
496                 codec_port: port {
497                         codec_endpoint: endpoint {
498                                 remote-endpoint = <&cpu_endpoint>;
499                                 clocks = <&audio_mclk>;
500                         };
501                 };
502         };
504         /* Ambient Light Sensor */
505         als: isl29023@44 {
506                 compatible = "isil,isl29023";
507                 reg = <0x44>;
508         };
511 &rtc {
512         status = "disabled";
515 &usb0 {
516         dr_mode = "otg";
519 &usb1 {
520         dr_mode = "host";
523 &mmc1 {
524         status = "okay";
525         pinctrl-names = "default";
526         pinctrl-0 = <&mmc1_pins>;
527         bus-width = <4>;
528         cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
529         vmmc-supply = <&vmmcsd_fixed>;
532 &mmc2 {
533         status = "okay";
534         pinctrl-names = "default";
535         pinctrl-0 = <&emmc_pins>;
536         bus-width = <8>;
537         vmmc-supply = <&vmmcsd_fixed>;
538         mmc-pwrseq = <&emmc_pwrseq>;
541 &mcasp0 {
542         status = "okay";
543         pinctrl-names = "default";
544         pinctrl-0 = <&audio_pins>;
545         #sound-dai-cells = <0>;
546         op-mode = <0>;  /* MCASP_ISS_MODE */
547         tdm-slots = <2>;
548         /* 4 serializers */
549         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
550                 0 0 1 2
551         >;
552         tx-num-evt = <32>;
553         rx-num-evt = <32>;
555         cpu_port: port {
556                 cpu_endpoint: endpoint {
557                         remote-endpoint = <&codec_endpoint>;
559                         dai-format = "dsp_b";
560                         bitclock-master = <&codec_port>;
561                         frame-master = <&codec_port>;
562                         bitclock-inversion;
563                         clocks = <&audio_mclk>;
564                 };
565         };
568 &uart0 {
569         status = "okay";
570         pinctrl-names = "default";
571         pinctrl-0 = <&uart0_pins>;
574 &uart1 {
575         status = "okay";
576         pinctrl-names = "default";
577         pinctrl-0 = <&uart1_pins>;
580 &uart4 {
581         status = "okay";
582         pinctrl-names = "default";
583         pinctrl-0 = <&uart4_pins>;
586 &spi0 {
587         status = "okay";
588         pinctrl-names = "default";
589         pinctrl-0 = <&spi0_pins>;
591         flash: n25q032@1 {
592                 #address-cells = <1>;
593                 #size-cells = <1>;
594                 compatible = "micron,n25q032";
595                 reg = <1>;
596                 spi-max-frequency = <5000000>;
597         };
600 #include "tps65217.dtsi"
602 &tps {
603         ti,pmic-shutdown-controller;
605         interrupt-parent = <&intc>;
606         interrupts = <7>;       /* NNMI */
608         regulators {
609                 dcdc1_reg: regulator@0 {
610                         /* VDDS_DDR */
611                         regulator-min-microvolt = <1500000>;
612                         regulator-max-microvolt = <1500000>;
613                         regulator-always-on;
614                 };
616                 dcdc2_reg: regulator@1 {
617                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
618                         regulator-name = "vdd_mpu";
619                         regulator-min-microvolt = <925000>;
620                         regulator-max-microvolt = <1325000>;
621                         regulator-boot-on;
622                         regulator-always-on;
623                 };
625                 dcdc3_reg: regulator@2 {
626                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
627                         regulator-name = "vdd_core";
628                         regulator-min-microvolt = <925000>;
629                         regulator-max-microvolt = <1150000>;
630                         regulator-boot-on;
631                         regulator-always-on;
632                 };
634                 ldo1_reg: regulator@3 {
635                         /* VRTC / VIO / VDDS*/
636                         regulator-always-on;
637                         regulator-min-microvolt = <1800000>;
638                         regulator-max-microvolt = <1800000>;
639                 };
641                 ldo2_reg: regulator@4 {
642                         /* VDD_3V3AUX */
643                         regulator-always-on;
644                         regulator-min-microvolt = <3300000>;
645                         regulator-max-microvolt = <3300000>;
646                 };
648                 ldo3_reg: regulator@5 {
649                         /* VDD_1V8 */
650                         regulator-min-microvolt = <1800000>;
651                         regulator-max-microvolt = <1800000>;
652                         regulator-always-on;
653                 };
655                 ldo4_reg: regulator@6 {
656                         /* VDD_3V3A */
657                         regulator-min-microvolt = <3300000>;
658                         regulator-max-microvolt = <3300000>;
659                         regulator-always-on;
660                 };
661         };
664 &cpsw_emac0 {
665         phy-mode = "mii";
666         phy-handle = <&ethphy0>;
669 &mac {
670         status = "okay";
671         pinctrl-names = "default", "sleep";
672         pinctrl-0 = <&cpsw_default>;
673         pinctrl-1 = <&cpsw_sleep>;
676 &davinci_mdio {
677         status = "okay";
678         pinctrl-names = "default", "sleep";
679         pinctrl-0 = <&davinci_mdio_default>;
680         pinctrl-1 = <&davinci_mdio_sleep>;
681         reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
682         reset-delay-us = <100>;   /* PHY datasheet states 100us min */
684         ethphy0: ethernet-phy@0 {
685                 reg = <0>;
686         };
689 &sham {
690         status = "okay";
693 &aes {
694         status = "okay";
697 &epwmss1 {
698         status = "okay";
701 &ehrpwm1 {
702         status = "okay";
703         pinctrl-names = "default";
704         pinctrl-0 = <&ehrpwm1_pins>;
707 &lcdc {
708         status = "okay";
711 &tscadc {
712         status = "okay";
715 &am335x_adc {
716         ti,adc-channels = <0 1 2 3 4 5 6 7>;