arch/arm/boot/dts/am3517-evm.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
   4  */
   5 /dts-v1/;
   6
   7 #include "am3517.dtsi"
   8 #include "am3517-som.dtsi"
   9 #include "am3517-evm-ui.dtsi"
  10 #include <dt-bindings/input/input.h>
  11
  12 / {
  13         model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
  14         compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
  15
  16         aliases {
  17                 display0 = &lcd0;
  18         };
  19
  20         chosen {
  21                 stdout-path = &uart3;
  22         };
  23
  24         memory@80000000 {
  25                 device_type = "memory";
  26                 reg = <0x80000000 0x10000000>; /* 256 MB */
  27         };
  28
  29         vmmc_fixed: vmmc {
  30                 compatible = "regulator-fixed";
  31                 regulator-name = "vmmc_fixed";
  32                 regulator-min-microvolt = <3300000>;
  33                 regulator-max-microvolt = <3300000>;
  34         };
  35
  36         gpio-keys {
  37                 compatible = "gpio-keys-polled";
  38                 poll-interval = <100>;
  39
  40                 user_pb {
  41                         label = "User Push Button";
  42                         linux,code = <BTN_0>;
  43                         gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 user_sw_1 {
  47                         label = "User Switch 1";
  48                         linux,code = <BTN_1>;
  49                         gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 user_sw_2 {
  53                         label = "User Switch 2";
  54                         linux,code = <BTN_2>;
  55                         gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 user_sw_3 {
  59                         label = "User Switch 3";
  60                         linux,code = <BTN_3>;
  61                         gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 user_sw_4 {
  65                         label = "User Switch 4";
  66                         linux,code = <BTN_4>;
  67                         gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 user_sw_5 {
  71                         label = "User Switch 5";
  72                         linux,code = <BTN_5>;
  73                         gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 user_sw_6 {
  77                         label = "User Switch 6";
  78                         linux,code = <BTN_6>;
  79                         gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
  80                 };
  81
  82                 user_sw_7 {
  83                         label = "User Switch 7";
  84                         linux,code = <BTN_7>;
  85                         gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
  86                 };
  87
  88                 user_sw_8 {
  89                         label = "User Switch 8";
  90                         linux,code = <BTN_8>;
  91                         gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
  92                 };
  93         };
  94
  95         gpio-leds {
  96                 compatible = "gpio-leds";
  97
  98                 pinctrl-names = "default";
  99                 pinctrl-0 = <&leds_pins>;
 100
 101                 user_led_1 {
 102                         label = "am3517evm:green:user_led_1";
 103                         gpios = <&tca6416 7 GPIO_ACTIVE_LOW>;
 104                         default-state = "on";
 105                 };
 106
 107                 user_led_2 {
 108                         label = "am3517evm:green:user_led_2";
 109                         gpios = <&tca6416 6 GPIO_ACTIVE_LOW>;
 110                         default-state = "on";
 111                 };
 112
 113                 user_led_3 {
 114                         label = "am3517evm:green:user_led_3";
 115                         gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 116                         linux,default-trigger = "mmc0"; /* SD/MMC card activity */
 117                 };
 118
 119                 user_led_4 {
 120                         label = "am3517evm:green:user_led_4";
 121                         gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 122                         linux,default-trigger = "heartbeat";
 123                 };
 124         };
 125
 126         lcd0: display@0 {
 127                 /* This isn't the exact LCD, but the timings meet spec */
 128                 /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
 129                 compatible = "newhaven,nhd-4.3-480272ef-atxl";
 130                 label = "15";
 131                 backlight = <&bl>;
 132                 enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;    /* gpio176, lcd INI */
 133                 vcc-supply = <&vdd_io_reg>;
 134
 135                 port {
 136                         lcd_in: endpoint {
 137                                 remote-endpoint = <&dpi_out>;
 138                         };
 139                 };
 140         };
 141
 142         bl: backlight {
 143                 compatible = "pwm-backlight";
 144                 pinctrl-names = "default";
 145                 power-supply = <&vdd_io_reg>;
 146                 pinctrl-0 = <&backlight_pins>;
 147                 pwms = <&pwm11 0 5000000 0>;
 148                 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 149                 default-brightness-level = <7>;
 150                 enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
 151         };
 152
 153         pwm11: dmtimer-pwm@11 {
 154                 compatible = "ti,omap-dmtimer-pwm";
 155                 pinctrl-names = "default";
 156                 pinctrl-0 = <&pwm_pins>;
 157                 ti,timers = <&timer11>;
 158                 #pwm-cells = <3>;
 159                 ti,clock-source = <0x01>;
 160         };
 161
 162         /* HS USB Host PHY on PORT 1 */
 163         hsusb1_phy: hsusb1_phy {
 164                 compatible = "usb-nop-xceiv";
 165                 reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 166                 #phy-cells = <0>;
 167         };
 168 };
 169
 170 &davinci_emac {
 171              status = "okay";
 172 };
 173
 174 &davinci_mdio {
 175              status = "okay";
 176 };
 177
 178 &dss {
 179         status = "okay";
 180
 181         pinctrl-names = "default";
 182         pinctrl-0 = <&dss_dpi_pins>;
 183
 184         vdds_dsi-supply = <&vdd_io_reg>;
 185         vdda_video-supply = <&vdd_io_reg>;
 186
 187         port {
 188                 dpi_out: endpoint {
 189                         remote-endpoint = <&lcd_in>;
 190                         data-lines = <16>;
 191                 };
 192         };
 193 };
 194
 195 &i2c2 {
 196         clock-frequency = <400000>;
 197         /* User DIP swithes [1:8] / User LEDS [1:2] */
 198         tca6416: gpio@21 {
 199                 compatible = "ti,tca6416";
 200                 reg = <0x21>;
 201                 gpio-controller;
 202                 #gpio-cells = <2>;
 203                 vcc-supply = <&vdd_io_reg>;
 204         };
 205 };
 206
 207 &i2c3 {
 208         clock-frequency = <400000>;
 209 };
 210
 211 &mmc1 {
 212         status = "okay";
 213         pinctrl-names = "default";
 214         pinctrl-0 = <&mmc1_pins>;
 215         vmmc-supply = <&vmmc_fixed>;
 216         bus-width = <4>;
 217         wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
 218         cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
 219 };
 220
 221 &mmc3 {
 222       status = "disabled";
 223 };
 224
 225 &usbhshost {
 226         port1-mode = "ehci-phy";
 227 };
 228
 229 &usbhsehci {
 230         phys = <&hsusb1_phy>;
 231 };
 232
 233 &omap3_pmx_core {
 234         pinctrl-names = "default";
 235         pinctrl-0 = <&hsusb1_rst_pins>;
 236
 237         leds_pins: pinmux_leds_pins {
 238                 pinctrl-single,pins = <
 239                         OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */
 240                         OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */
 241                 >;
 242         };
 243
 244         mmc1_pins: pinmux_mmc1_pins {
 245                 pinctrl-single,pins = <
 246                         OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
 247                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
 248                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
 249                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
 250                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
 251                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
 252                         OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */
 253                         OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */
 254                 >;
 255         };
 256
 257         pwm_pins: pinmux_pwm_pins {
 258                 pinctrl-single,pins = <
 259                         OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1)       /* mcspi2_cs0.gpt11_pwm */
 260                 >;
 261         };
 262
 263         backlight_pins: pinmux_backlight_pins {
 264                 pinctrl-single,pins = <
 265                         OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4)       /* mcspi2_cs1.gpio_182 */
 266                 >;
 267         };
 268
 269         dss_dpi_pins: pinmux_dss_dpi_pins {
 270                 pinctrl-single,pins = <
 271                         OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4)       /* mcspi1_cs2.gpio_176 */
 272                         OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)       /* dss_pclk.dss_pclk */
 273                         OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)       /* dss_hsync.dss_hsync */
 274                         OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)       /* dss_vsync.dss_vsync */
 275                         OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)       /* dss_acbias.dss_acbias */
 276                         OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)       /* dss_data0.dss_data0 */
 277                         OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)       /* dss_data1.dss_data1 */
 278                         OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)       /* dss_data2.dss_data2 */
 279                         OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)       /* dss_data3.dss_data3 */
 280                         OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)       /* dss_data4.dss_data4 */
 281                         OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)       /* dss_data5.dss_data5 */
 282                         OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)       /* dss_data6.dss_data6 */
 283                         OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)       /* dss_data7.dss_data7 */
 284                         OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)       /* dss_data8.dss_data8 */
 285                         OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)       /* dss_data9.dss_data9 */
 286                         OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)       /* dss_data10.dss_data10 */
 287                         OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)       /* dss_data11.dss_data11 */
 288                         OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)       /* dss_data12.dss_data12 */
 289                         OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)       /* dss_data13.dss_data13 */
 290                         OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)       /* dss_data14.dss_data14 */
 291                         OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)       /* dss_data15.dss_data15 */
 292                 >;
 293         };
 294
 295         hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
 296                 pinctrl-single,pins = <
 297                         OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)       /* gpmc_ncs6.gpio_57 */
 298                 >;
 299         };
 300 };
 301
 302 &omap3_pmx_core2 {
 303         pinctrl-names = "default";
 304         pinctrl-0 = <&hsusb1_pins>;
 305
 306         hsusb1_pins: pinmux_hsusb1_pins {
 307                 pinctrl-single,pins = <
 308                         OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)    /* etk_clk.hsusb1_stp */
 309                         OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)    /* etk_ctl.hsusb1_clk */
 310                         OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)     /* etk_d8.hsusb1_dir */
 311                         OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)     /* etk_d9.hsusb1_nxt */
 312                         OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)     /* etk_d0.hsusb1_data0 */
 313                         OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)     /* etk_d1.hsusb1_data1 */
 314                         OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)     /* etk_d2.hsusb1_data2 */
 315                         OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)     /* etk_d7.hsusb1_data3 */
 316                         OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)     /* etk_d4.hsusb1_data4 */
 317                         OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)     /* etk_d5.hsusb1_data5 */
 318                         OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)     /* etk_d6.hsusb1_data6 */
 319                         OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)     /* etk_d3.hsusb1_data7 */
 320                 >;
 321         };
 322 };