arch/arm/boot/dts/arm-realview-pbx.dtsi

   1 /*
   2  * Copyright 2016 Linaro Ltd
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a copy
   5  * of this software and associated documentation files (the "Software"), to deal
   6  * in the Software without restriction, including without limitation the rights
   7  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
   8  * copies of the Software, and to permit persons to whom the Software is
   9  * furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice shall be included in
  12  * all copies or substantial portions of the Software.
  13  *
  14  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  15  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  16  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  17  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  18  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  19  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  20  * THE SOFTWARE.
  21  */
  22
  23 #include <dt-bindings/interrupt-controller/irq.h>
  24 #include <dt-bindings/gpio/gpio.h>
  25
  26 / {
  27         #address-cells = <1>;
  28         #size-cells = <1>;
  29         compatible = "arm,realview-pbx";
  30
  31         chosen { };
  32
  33         aliases {
  34                 serial0 = &serial0;
  35                 serial1 = &serial1;
  36                 serial2 = &serial2;
  37                 serial3 = &serial3;
  38                 i2c0 = &i2c0;
  39                 i2c1 = &i2c1;
  40         };
  41
  42         memory {
  43                 device_type = "memory";
  44                 /* 128 MiB memory @ 0x0 */
  45                 reg = <0x00000000 0x08000000>;
  46         };
  47
  48         /* The voltage to the MMC card is hardwired at 3.3V */
  49         vmmc: regulator-vmmc {
  50                 compatible = "regulator-fixed";
  51                 regulator-name = "vmmc";
  52                 regulator-min-microvolt = <3300000>;
  53                 regulator-max-microvolt = <3300000>;
  54                 regulator-boot-on;
  55         };
  56
  57         veth: regulator-veth {
  58                 compatible = "regulator-fixed";
  59                 regulator-name = "veth";
  60                 regulator-min-microvolt = <3300000>;
  61                 regulator-max-microvolt = <3300000>;
  62                 regulator-boot-on;
  63         };
  64
  65         xtal24mhz: xtal24mhz@24M {
  66                 #clock-cells = <0>;
  67                 compatible = "fixed-clock";
  68                 clock-frequency = <24000000>;
  69         };
  70
  71         refclk32khz: refclk32khz {
  72                 #clock-cells = <0>;
  73                 compatible = "fixed-clock";
  74                 clock-frequency = <32768>;
  75         };
  76
  77         timclk: timclk@1M {
  78                 #clock-cells = <0>;
  79                 compatible = "fixed-factor-clock";
  80                 clock-div = <24>;
  81                 clock-mult = <1>;
  82                 clocks = <&xtal24mhz>;
  83         };
  84
  85         mclk: mclk@24M {
  86                 #clock-cells = <0>;
  87                 compatible = "fixed-factor-clock";
  88                 clock-div = <1>;
  89                 clock-mult = <1>;
  90                 clocks = <&xtal24mhz>;
  91         };
  92
  93         kmiclk: kmiclk@24M {
  94                 #clock-cells = <0>;
  95                 compatible = "fixed-factor-clock";
  96                 clock-div = <1>;
  97                 clock-mult = <1>;
  98                 clocks = <&xtal24mhz>;
  99         };
 100
 101         sspclk: sspclk@24M {
 102                 #clock-cells = <0>;
 103                 compatible = "fixed-factor-clock";
 104                 clock-div = <1>;
 105                 clock-mult = <1>;
 106                 clocks = <&xtal24mhz>;
 107         };
 108
 109         uartclk: uartclk@24M {
 110                 #clock-cells = <0>;
 111                 compatible = "fixed-factor-clock";
 112                 clock-div = <1>;
 113                 clock-mult = <1>;
 114                 clocks = <&xtal24mhz>;
 115         };
 116
 117         wdogclk: wdogclk@24M {
 118                 #clock-cells = <0>;
 119                 compatible = "fixed-factor-clock";
 120                 clock-div = <1>;
 121                 clock-mult = <1>;
 122                 clocks = <&xtal24mhz>;
 123         };
 124
 125         /* FIXME: this actually hangs off the PLL clocks */
 126         pclk: pclk@0 {
 127                 #clock-cells = <0>;
 128                 compatible = "fixed-clock";
 129                 clock-frequency = <0>;
 130         };
 131
 132         flash0@40000000 {
 133                 /* 2 * 32MiB NOR Flash memory */
 134                 compatible = "arm,versatile-flash", "cfi-flash";
 135                 reg = <0x40000000 0x04000000>;
 136                 bank-width = <4>;
 137                 partitions {
 138                         compatible = "arm,arm-firmware-suite";
 139                 };
 140         };
 141
 142         flash1@44000000 {
 143                 /* 2 * 32MiB NOR Flash memory */
 144                 compatible = "arm,versatile-flash", "cfi-flash";
 145                 reg = <0x44000000 0x04000000>;
 146                 bank-width = <4>;
 147                 partitions {
 148                         compatible = "arm,arm-firmware-suite";
 149                 };
 150         };
 151
 152         /* SMSC 9118 ethernet with PHY and EEPROM */
 153         ethernet: ethernet@4e000000 {
 154                 compatible = "smsc,lan9118", "smsc,lan9115";
 155                 reg = <0x4e000000 0x10000>;
 156                 phy-mode = "mii";
 157                 reg-io-width = <4>;
 158                 smsc,irq-active-high;
 159                 smsc,irq-push-pull;
 160                 vdd33a-supply = <&veth>;
 161                 vddvario-supply = <&veth>;
 162         };
 163
 164         usb: usb@4f000000 {
 165                 compatible = "nxp,usb-isp1761";
 166                 reg = <0x4f000000 0x20000>;
 167                 port1-otg;
 168         };
 169
 170         bridge {
 171                 compatible = "ti,ths8134a", "ti,ths8134";
 172                 #address-cells = <1>;
 173                 #size-cells = <0>;
 174
 175                 ports {
 176                         #address-cells = <1>;
 177                         #size-cells = <0>;
 178
 179                         port@0 {
 180                                 reg = <0>;
 181
 182                                 vga_bridge_in: endpoint {
 183                                         remote-endpoint = <&clcd_pads>;
 184                                 };
 185                         };
 186
 187                         port@1 {
 188                                 reg = <1>;
 189
 190                                 vga_bridge_out: endpoint {
 191                                         remote-endpoint = <&vga_con_in>;
 192                                 };
 193                         };
 194                 };
 195         };
 196
 197         vga {
 198                 /*
 199                  * This DDC I2C is connected directly to the DVI portions
 200                  * of the connector, so it's not really working when the
 201                  * monitor is connected to the VGA connector.
 202                  */
 203                 compatible = "vga-connector";
 204                 ddc-i2c-bus = <&i2c1>;
 205
 206                 port {
 207                         vga_con_in: endpoint {
 208                                 remote-endpoint = <&vga_bridge_out>;
 209                         };
 210                 };
 211         };
 212
 213         soc: soc {
 214                 compatible = "arm,realview-pbx-soc", "simple-bus";
 215                 #address-cells = <1>;
 216                 #size-cells = <1>;
 217                 regmap = <&syscon>;
 218                 ranges;
 219
 220                 syscon: syscon@10000000 {
 221                         compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
 222                         reg = <0x10000000 0x1000>;
 223
 224                         led@08.0 {
 225                                 compatible = "register-bit-led";
 226                                 offset = <0x08>;
 227                                 mask = <0x01>;
 228                                 label = "versatile:0";
 229                                 linux,default-trigger = "heartbeat";
 230                                 default-state = "on";
 231                         };
 232                         led@08.1 {
 233                                 compatible = "register-bit-led";
 234                                 offset = <0x08>;
 235                                 mask = <0x02>;
 236                                 label = "versatile:1";
 237                                 linux,default-trigger = "mmc0";
 238                                 default-state = "off";
 239                         };
 240                         led@08.2 {
 241                                 compatible = "register-bit-led";
 242                                 offset = <0x08>;
 243                                 mask = <0x04>;
 244                                 label = "versatile:2";
 245                                 linux,default-trigger = "cpu0";
 246                                 default-state = "off";
 247                         };
 248                         led@08.3 {
 249                                 compatible = "register-bit-led";
 250                                 offset = <0x08>;
 251                                 mask = <0x08>;
 252                                 label = "versatile:3";
 253                                 default-state = "off";
 254                         };
 255                         led@08.4 {
 256                                 compatible = "register-bit-led";
 257                                 offset = <0x08>;
 258                                 mask = <0x10>;
 259                                 label = "versatile:4";
 260                                 default-state = "off";
 261                         };
 262                         led@08.5 {
 263                                 compatible = "register-bit-led";
 264                                 offset = <0x08>;
 265                                 mask = <0x20>;
 266                                 label = "versatile:5";
 267                                 default-state = "off";
 268                         };
 269                         led@08.6 {
 270                                 compatible = "register-bit-led";
 271                                 offset = <0x08>;
 272                                 mask = <0x40>;
 273                                 label = "versatile:6";
 274                                 default-state = "off";
 275                         };
 276                         led@08.7 {
 277                                 compatible = "register-bit-led";
 278                                 offset = <0x08>;
 279                                 mask = <0x80>;
 280                                 label = "versatile:7";
 281                                 default-state = "off";
 282                         };
 283                         oscclk0: osc0@0c {
 284                                 compatible = "arm,syscon-icst307";
 285                                 #clock-cells = <0>;
 286                                 lock-offset = <0x20>;
 287                                 vco-offset = <0x0C>;
 288                                 clocks = <&xtal24mhz>;
 289                         };
 290                         oscclk1: osc1@10 {
 291                                 compatible = "arm,syscon-icst307";
 292                                 #clock-cells = <0>;
 293                                 lock-offset = <0x20>;
 294                                 vco-offset = <0x10>;
 295                                 clocks = <&xtal24mhz>;
 296                         };
 297                         oscclk2: osc2@14 {
 298                                 compatible = "arm,syscon-icst307";
 299                                 #clock-cells = <0>;
 300                                 lock-offset = <0x20>;
 301                                 vco-offset = <0x14>;
 302                                 clocks = <&xtal24mhz>;
 303                         };
 304                         oscclk3: osc3@18 {
 305                                 compatible = "arm,syscon-icst307";
 306                                 #clock-cells = <0>;
 307                                 lock-offset = <0x20>;
 308                                 vco-offset = <0x18>;
 309                                 clocks = <&xtal24mhz>;
 310                         };
 311                         oscclk4: osc4@1c {
 312                                 compatible = "arm,syscon-icst307";
 313                                 #clock-cells = <0>;
 314                                 lock-offset = <0x20>;
 315                                 vco-offset = <0x1c>;
 316                                 clocks = <&xtal24mhz>;
 317                         };
 318                 };
 319
 320                 sp810_syscon0: sysctl@10001000 {
 321                         compatible = "arm,sp810", "arm,primecell";
 322                         reg = <0x10001000 0x1000>;
 323                         clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
 324                         clock-names = "refclk", "timclk", "apb_pclk";
 325                         #clock-cells = <1>;
 326                         clock-output-names = "timerclk0",
 327                                              "timerclk1",
 328                                              "timerclk2",
 329                                              "timerclk3";
 330                         assigned-clocks = <&sp810_syscon0 0>,
 331                                           <&sp810_syscon0 1>,
 332                                           <&sp810_syscon0 2>,
 333                                           <&sp810_syscon0 3>;
 334                         assigned-clock-parents = <&timclk>,
 335                                                <&timclk>,
 336                                                <&timclk>,
 337                                                <&timclk>;
 338                 };
 339
 340                 i2c0: i2c@10002000 {
 341                         #address-cells = <1>;
 342                         #size-cells = <0>;
 343                         compatible = "arm,versatile-i2c";
 344                         reg = <0x10002000 0x1000>;
 345
 346                         rtc@68 {
 347                                 compatible = "dallas,ds1338";
 348                                 reg = <0x68>;
 349                         };
 350                 };
 351
 352                 serial0: serial@10009000 {
 353                         compatible = "arm,pl011", "arm,primecell";
 354                         reg = <0x10009000 0x1000>;
 355                         clocks = <&uartclk>, <&pclk>;
 356                         clock-names = "uartclk", "apb_pclk";
 357                 };
 358
 359                 serial1: serial@1000a000 {
 360                         compatible = "arm,pl011", "arm,primecell";
 361                         reg = <0x1000a000 0x1000>;
 362                         clocks = <&uartclk>, <&pclk>;
 363                         clock-names = "uartclk", "apb_pclk";
 364                 };
 365
 366                 serial2: serial@1000b000 {
 367                         compatible = "arm,pl011", "arm,primecell";
 368                         reg = <0x1000b000 0x1000>;
 369                         clocks = <&uartclk>, <&pclk>;
 370                         clock-names = "uartclk", "apb_pclk";
 371                 };
 372
 373                 ssp: spi@1000d000 {
 374                         compatible = "arm,pl022", "arm,primecell";
 375                         reg = <0x1000d000 0x1000>;
 376                         clocks = <&sspclk>, <&pclk>;
 377                         clock-names = "SSPCLK", "apb_pclk";
 378                 };
 379
 380                 wdog0: watchdog@1000f000 {
 381                         compatible = "arm,sp805", "arm,primecell";
 382                         reg = <0x1000f000 0x1000>;
 383                         clocks = <&wdogclk>, <&pclk>;
 384                         clock-names = "wdog_clk", "apb_pclk";
 385                         status = "disabled";
 386                 };
 387
 388                 wdog1: watchdog@10010000 {
 389                         compatible = "arm,sp805", "arm,primecell";
 390                         reg = <0x10010000 0x1000>;
 391                         clocks = <&wdogclk>, <&pclk>;
 392                         clock-names = "wdog_clk", "apb_pclk";
 393                         status = "disabled";
 394                 };
 395
 396                 timer01: timer@10011000 {
 397                         compatible = "arm,sp804", "arm,primecell";
 398                         reg = <0x10011000 0x1000>;
 399                         clocks = <&sp810_syscon0 0>,
 400                                  <&sp810_syscon0 1>,
 401                                  <&pclk>;
 402                         clock-names = "timerclk0",
 403                                     "timerclk1",
 404                                     "apb_pclk";
 405                 };
 406
 407                 timer23: timer@10012000 {
 408                         compatible = "arm,sp804", "arm,primecell";
 409                         reg = <0x10012000 0x1000>;
 410                         clocks = <&sp810_syscon0 2>,
 411                                  <&sp810_syscon0 3>,
 412                                  <&pclk>;
 413                         clock-names = "timerclk2",
 414                                     "timerclk3",
 415                                     "apb_pclk";
 416                 };
 417
 418                 gpio0: gpio@10013000 {
 419                         compatible = "arm,pl061", "arm,primecell";
 420                         reg = <0x10013000 0x1000>;
 421                         gpio-controller;
 422                         #gpio-cells = <2>;
 423                         interrupt-controller;
 424                         #interrupt-cells = <2>;
 425                         clocks = <&pclk>;
 426                         clock-names = "apb_pclk";
 427                 };
 428
 429                 gpio1: gpio@10014000 {
 430                         compatible = "arm,pl061", "arm,primecell";
 431                         reg = <0x10014000 0x1000>;
 432                         gpio-controller;
 433                         #gpio-cells = <2>;
 434                         interrupt-controller;
 435                         #interrupt-cells = <2>;
 436                         clocks = <&pclk>;
 437                         clock-names = "apb_pclk";
 438                 };
 439
 440                 gpio2: gpio@10015000 {
 441                         compatible = "arm,pl061", "arm,primecell";
 442                         reg = <0x10015000 0x1000>;
 443                         gpio-controller;
 444                         #gpio-cells = <2>;
 445                         interrupt-controller;
 446                         #interrupt-cells = <2>;
 447                         clocks = <&pclk>;
 448                         clock-names = "apb_pclk";
 449                 };
 450
 451                 i2c1: i2c@10016000 {
 452                         #address-cells = <1>;
 453                         #size-cells = <0>;
 454                         compatible = "arm,versatile-i2c";
 455                         reg = <0x10016000 0x1000>;
 456                 };
 457
 458                 rtc: rtc@10017000 {
 459                         compatible = "arm,pl031", "arm,primecell";
 460                         reg = <0x10017000 0x1000>;
 461                         clocks = <&pclk>;
 462                         clock-names = "apb_pclk";
 463                 };
 464
 465                 timer45: timer@10018000 {
 466                         compatible = "arm,sp804", "arm,primecell";
 467                         reg = <0x10018000 0x1000>;
 468                         clocks = <&timclk>, <&timclk>, <&pclk>;
 469                         clock-names = "timerclk4", "timerclk5", "apb_pclk";
 470                 };
 471
 472                 timer67: timer@10019000 {
 473                         compatible = "arm,sp804", "arm,primecell";
 474                         reg = <0x10019000 0x1000>;
 475                         clocks = <&timclk>, <&timclk>, <&pclk>;
 476                         clock-names = "timerclk6", "timerclk7", "apb_pclk";
 477                 };
 478
 479                 sp810_syscon1: sysctl@1001a000 {
 480                         compatible = "arm,sp810", "arm,primecell";
 481                         reg = <0x1001a000 0x1000>;
 482                         clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
 483                         clock-names = "refclk", "timclk", "apb_pclk";
 484                         #clock-cells = <1>;
 485                         clock-output-names = "timerclk4",
 486                                              "timerclk5",
 487                                              "timerclk6",
 488                                              "timerclk7";
 489                         assigned-clocks = <&sp810_syscon1 0>,
 490                                           <&sp810_syscon1 1>,
 491                                           <&sp810_syscon1 2>,
 492                                           <&sp810_syscon1 3>;
 493                         assigned-clock-parents = <&timclk>,
 494                                                <&timclk>,
 495                                                <&timclk>,
 496                                                <&timclk>;
 497                 };
 498         };
 499
 500
 501         /* These peripherals are inside the FPGA */
 502         fpga {
 503                 #address-cells = <1>;
 504                 #size-cells = <1>;
 505                 compatible = "simple-bus";
 506                 ranges;
 507
 508                 aaci: aaci@10004000 {
 509                         compatible = "arm,pl041", "arm,primecell";
 510                         reg = <0x10004000 0x1000>;
 511                         clocks = <&pclk>;
 512                         clock-names = "apb_pclk";
 513                 };
 514
 515                 mmc: mmcsd@10005000 {
 516                         compatible = "arm,pl18x", "arm,primecell";
 517                         reg = <0x10005000 0x1000>;
 518
 519                         /* Due to frequent FIFO overruns, use just 500 kHz */
 520                         max-frequency = <500000>;
 521                         bus-width = <4>;
 522                         cap-sd-highspeed;
 523                         cap-mmc-highspeed;
 524                         clocks = <&mclk>, <&pclk>;
 525                         clock-names = "mclk", "apb_pclk";
 526                         vmmc-supply = <&vmmc>;
 527                         cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 528                         wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 529                 };
 530
 531                 kmi0: kmi@10006000 {
 532                         compatible = "arm,pl050", "arm,primecell";
 533                         reg = <0x10006000 0x1000>;
 534                         clocks = <&kmiclk>, <&pclk>;
 535                         clock-names = "KMIREFCLK", "apb_pclk";
 536                 };
 537
 538                 kmi1: kmi@10007000 {
 539                         compatible = "arm,pl050", "arm,primecell";
 540                         reg = <0x10007000 0x1000>;
 541                         clocks = <&kmiclk>, <&pclk>;
 542                         clock-names = "KMIREFCLK", "apb_pclk";
 543                 };
 544
 545                 serial3: serial@1000c000 {
 546                         compatible = "arm,pl011", "arm,primecell";
 547                         reg = <0x1000c000 0x1000>;
 548                         clocks = <&uartclk>, <&pclk>;
 549                         clock-names = "uartclk", "apb_pclk";
 550                 };
 551         };
 552
 553         /* These peripherals are inside the NEC ISSP */
 554         issp {
 555                 #address-cells = <1>;
 556                 #size-cells = <1>;
 557                 compatible = "simple-bus";
 558                 ranges;
 559
 560                 clcd: clcd@10020000 {
 561                         compatible = "arm,pl111", "arm,primecell";
 562                         reg = <0x10020000 0x1000>;
 563                         interrupt-names = "combined";
 564                         clocks = <&oscclk4>, <&pclk>;
 565                         clock-names = "clcdclk", "apb_pclk";
 566                         /* 1024x768 16bpp @65MHz works fine */
 567                         max-memory-bandwidth = <95000000>;
 568
 569                         port {
 570                                 clcd_pads: endpoint {
 571                                         remote-endpoint = <&vga_bridge_in>;
 572                                         arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 573                                 };
 574                         };
 575                 };
 576         };
 577 };