arch/arm/boot/dts/armada-370-rd.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for Marvell Armada 370 Reference Design board
   4  * (RD-88F6710-A1)
   5  *
   6  *  Copied from arch/arm/boot/dts/armada-370-db.dts
   7  *
   8  *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
   9  *
  10  * Note: this Device Tree assumes that the bootloader has remapped the
  11  * internal registers to 0xf1000000 (instead of the default
  12  * 0xd0000000). The 0xf1000000 is the default used by the recent,
  13  * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
  14  * boards were delivered with an older version of the bootloader that
  15  * left internal registers mapped at 0xd0000000. If you are in this
  16  * situation, you should either update your bootloader (preferred
  17  * solution) or the below Device Tree should be adjusted.
  18  */
  19
  20 /dts-v1/;
  21 #include <dt-bindings/input/input.h>
  22 #include <dt-bindings/interrupt-controller/irq.h>
  23 #include <dt-bindings/gpio/gpio.h>
  24 #include "armada-370.dtsi"
  25
  26 / {
  27         model = "Marvell Armada 370 Reference Design";
  28         compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
  29
  30         chosen {
  31                 stdout-path = "serial0:115200n8";
  32         };
  33
  34         memory@0 {
  35                 device_type = "memory";
  36                 reg = <0x00000000 0x20000000>; /* 512 MB */
  37         };
  38
  39         soc {
  40                 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
  41                           MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
  42                           MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
  43
  44                 internal-regs {
  45                         serial@12000 {
  46                                 status = "okay";
  47                         };
  48                         sata@a0000 {
  49                                 nr-ports = <2>;
  50                                 status = "okay";
  51                         };
  52
  53                         ethernet@70000 {
  54                                 status = "okay";
  55                                 phy = <&phy0>;
  56                                 phy-mode = "sgmii";
  57                         };
  58                         ethernet@74000 {
  59                                 pinctrl-0 = <&ge1_rgmii_pins>;
  60                                 pinctrl-names = "default";
  61                                 status = "okay";
  62                                 phy-mode = "rgmii-id";
  63                                 fixed-link {
  64                                            speed = <1000>;
  65                                            full-duplex;
  66                                 };
  67                         };
  68
  69                         mvsdio@d4000 {
  70                                 pinctrl-0 = <&sdio_pins1>;
  71                                 pinctrl-names = "default";
  72                                 status = "okay";
  73                                 /* No CD or WP GPIOs */
  74                                 broken-cd;
  75                         };
  76
  77                         usb@50000 {
  78                                 status = "okay";
  79                         };
  80
  81                         usb@51000 {
  82                                 status = "okay";
  83                         };
  84
  85                         gpio-keys {
  86                                 compatible = "gpio-keys";
  87                                 #address-cells = <1>;
  88                                 #size-cells = <0>;
  89                                 button {
  90                                         label = "Software Button";
  91                                         linux,code = <KEY_POWER>;
  92                                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
  93                                 };
  94                         };
  95
  96                         gpio-fan {
  97                                 compatible = "gpio-fan";
  98                                 gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
  99                                 gpio-fan,speed-map = <0 0 3000 1>;
 100                                 pinctrl-0 = <&fan_pins>;
 101                                 pinctrl-names = "default";
 102                         };
 103
 104                         gpio_leds {
 105                                 compatible = "gpio-leds";
 106                                 pinctrl-names = "default";
 107                                 pinctrl-0 = <&led_pins>;
 108
 109                                 sw_led {
 110                                         label = "370rd:green:sw";
 111                                         gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 112                                         default-state = "keep";
 113                                 };
 114                         };
 115                 };
 116         };
 117 };
 118
 119 &pciec {
 120         status = "okay";
 121
 122         /* Internal mini-PCIe connector */
 123         pcie@1,0 {
 124                 /* Port 0, Lane 0 */
 125                 status = "okay";
 126         };
 127
 128         /* Internal mini-PCIe connector */
 129         pcie@2,0 {
 130                 /* Port 1, Lane 0 */
 131                 status = "okay";
 132         };
 133 };
 134
 135 &mdio {
 136         pinctrl-0 = <&mdio_pins>;
 137         pinctrl-names = "default";
 138         phy0: ethernet-phy@0 {
 139                 reg = <0>;
 140         };
 141
 142         switch: switch@10 {
 143                 compatible = "marvell,mv88e6085";
 144                 #address-cells = <1>;
 145                 #size-cells = <0>;
 146                 reg = <0x10>;
 147                 interrupt-controller;
 148                 #interrupt-cells = <2>;
 149
 150                 ports {
 151                         #address-cells = <1>;
 152                         #size-cells = <0>;
 153
 154                         port@0 {
 155                                 reg = <0>;
 156                                 label = "lan0";
 157                         };
 158
 159                         port@1 {
 160                                reg = <1>;
 161                                label = "lan1";
 162                         };
 163
 164                         port@2 {
 165                                reg = <2>;
 166                                label = "lan2";
 167                         };
 168
 169                         port@3 {
 170                                reg = <3>;
 171                                label = "lan3";
 172                         };
 173
 174                         port@5 {
 175                                 reg = <5>;
 176                                 label = "cpu";
 177                                 ethernet = <&eth1>;
 178                                 fixed-link {
 179                                         speed = <1000>;
 180                                         full-duplex;
 181                                 };
 182                         };
 183                 };
 184
 185                 mdio {
 186                         #address-cells = <1>;
 187                         #size-cells = <0>;
 188
 189                         switchphy0: switchphy@0 {
 190                                 reg = <0>;
 191                                 interrupt-parent = <&switch>;
 192                                 interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 193                         };
 194
 195                         switchphy1: switchphy@1 {
 196                                 reg = <1>;
 197                                 interrupt-parent = <&switch>;
 198                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 199                         };
 200
 201                         switchphy2: switchphy@2 {
 202                                 reg = <2>;
 203                                 interrupt-parent = <&switch>;
 204                                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 205                         };
 206
 207                         switchphy3: switchphy@3 {
 208                                 reg = <3>;
 209                                 interrupt-parent = <&switch>;
 210                                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 211                         };
 212                 };
 213         };
 214 };
 215
 216
 217 &pinctrl {
 218         fan_pins: fan-pins {
 219                 marvell,pins = "mpp8";
 220                 marvell,function = "gpio";
 221         };
 222
 223         led_pins: led-pins {
 224                 marvell,pins = "mpp32";
 225                 marvell,function = "gpio";
 226         };
 227 };
 228
 229 &nand_controller {
 230         status = "okay";
 231
 232         nand@0 {
 233                 reg = <0>;
 234                 label = "pxa3xx_nand-0";
 235                 nand-rb = <0>;
 236                 marvell,nand-keep-config;
 237                 nand-on-flash-bbt;
 238
 239                 partitions {
 240                         compatible = "fixed-partitions";
 241                         #address-cells = <1>;
 242                         #size-cells = <1>;
 243
 244                         partition@0 {
 245                                 label = "U-Boot";
 246                                 reg = <0 0x800000>;
 247                         };
 248                         partition@800000 {
 249                                 label = "Linux";
 250                                 reg = <0x800000 0x800000>;
 251                         };
 252                         partition@1000000 {
 253                                 label = "Filesystem";
 254                                 reg = <0x1000000 0x3f000000>;
 255                         };
 256                 };
 257         };
 258 };