arch/arm/boot/dts/armada-388-clearfog.dts

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2 /*
   3  * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
   4  *
   5  *  Copyright (C) 2015 Russell King
   6  */
   7
   8 /dts-v1/;
   9 #include "armada-388-clearfog.dtsi"
  10
  11 / {
  12         model = "SolidRun Clearfog A1";
  13         compatible = "solidrun,clearfog-a1", "marvell,armada388",
  14                 "marvell,armada385", "marvell,armada380";
  15
  16         soc {
  17                 internal-regs {
  18                         usb3@f0000 {
  19                                 /* CON2, nearest CPU, USB2 only. */
  20                                 status = "okay";
  21                         };
  22                 };
  23
  24                 pcie {
  25                         pcie@3,0 {
  26                                 /* Port 2, Lane 0. CON2, nearest CPU. */
  27                                 reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
  28                                 status = "okay";
  29                         };
  30                 };
  31         };
  32
  33         gpio-keys {
  34                 compatible = "gpio-keys";
  35                 pinctrl-0 = <&rear_button_pins>;
  36                 pinctrl-names = "default";
  37
  38                 button_0 {
  39                         /* The rear SW3 button */
  40                         label = "Rear Button";
  41                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  42                         linux,can-disable;
  43                         linux,code = <BTN_0>;
  44                 };
  45         };
  46 };
  47
  48 &eth1 {
  49         /* ethernet@30000 */
  50         fixed-link {
  51                 speed = <1000>;
  52                 full-duplex;
  53         };
  54 };
  55
  56 &expander0 {
  57         /*
  58          * PCA9655 GPIO expander:
  59          *  0-CON3 CLKREQ#
  60          *  1-CON3 PERST#
  61          *  2-CON2 PERST#
  62          *  3-CON3 W_DISABLE
  63          *  4-CON2 CLKREQ#
  64          *  5-USB3 overcurrent
  65          *  6-USB3 power
  66          *  7-CON2 W_DISABLE
  67          *  8-JP4 P1
  68          *  9-JP4 P4
  69          * 10-JP4 P5
  70          * 11-m.2 DEVSLP
  71          * 12-SFP_LOS
  72          * 13-SFP_TX_FAULT
  73          * 14-SFP_TX_DISABLE
  74          * 15-SFP_MOD_DEF0
  75          */
  76         pcie2-0-clkreq-hog {
  77                 gpio-hog;
  78                 gpios = <4 GPIO_ACTIVE_LOW>;
  79                 input;
  80                 line-name = "pcie2.0-clkreq";
  81         };
  82         pcie2-0-w-disable-hog {
  83                 gpio-hog;
  84                 gpios = <7 GPIO_ACTIVE_LOW>;
  85                 output-low;
  86                 line-name = "pcie2.0-w-disable";
  87         };
  88 };
  89
  90 &mdio {
  91         status = "okay";
  92
  93         switch@4 {
  94                 compatible = "marvell,mv88e6085";
  95                 #address-cells = <1>;
  96                 #size-cells = <0>;
  97                 reg = <4>;
  98                 pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
  99                 pinctrl-names = "default";
 100
 101                 ports {
 102                         #address-cells = <1>;
 103                         #size-cells = <0>;
 104
 105                         port@0 {
 106                                 reg = <0>;
 107                                 label = "lan5";
 108                         };
 109
 110                         port@1 {
 111                                 reg = <1>;
 112                                 label = "lan4";
 113                         };
 114
 115                         port@2 {
 116                                 reg = <2>;
 117                                 label = "lan3";
 118                         };
 119
 120                         port@3 {
 121                                 reg = <3>;
 122                                 label = "lan2";
 123                         };
 124
 125                         port@4 {
 126                                 reg = <4>;
 127                                 label = "lan1";
 128                         };
 129
 130                         port@5 {
 131                                 reg = <5>;
 132                                 label = "cpu";
 133                                 ethernet = <&eth1>;
 134                                 fixed-link {
 135                                         speed = <1000>;
 136                                         full-duplex;
 137                                 };
 138                         };
 139
 140                         port@6 {
 141                                 /* 88E1512 external phy */
 142                                 reg = <6>;
 143                                 label = "lan6";
 144                                 fixed-link {
 145                                         speed = <1000>;
 146                                         full-duplex;
 147                                 };
 148                         };
 149                 };
 150         };
 151 };
 152
 153 &pinctrl {
 154         clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
 155                 marvell,pins = "mpp46";
 156                 marvell,function = "ref";
 157         };
 158         clearfog_dsa0_pins: clearfog-dsa0-pins {
 159                 marvell,pins = "mpp23", "mpp41";
 160                 marvell,function = "gpio";
 161         };
 162         clearfog_spi1_cs_pins: spi1-cs-pins {
 163                 marvell,pins = "mpp55";
 164                 marvell,function = "spi1";
 165         };
 166         rear_button_pins: rear-button-pins {
 167                 marvell,pins = "mpp34";
 168                 marvell,function = "gpio";
 169         };
 170 };
 171
 172 &spi1 {
 173         /*
 174          * Add SPI CS pins for clearfog:
 175          * CS0: W25Q32
 176          * CS1:
 177          * CS2: mikrobus
 178          */
 179         pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
 180 };