arch/arm/boot/dts/at91-cosino_mega2560.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
   4  *                            Mega 2560 extension
   5  *
   6  * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
   7  *                      HCE Engineering
   8  *
   9  * Derived from at91sam9g35ek.dts by:
  10  *      Copyright (C) 2012 Atmel,
  11  *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
  12  */
  13
  14 /dts-v1/;
  15 #include "at91-cosino.dtsi"
  16
  17 / {
  18         model = "HCE Cosino Mega 2560";
  19         compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
  20 };
  21
  22 &adc0 {
  23         atmel,adc-ts-wires = <4>;
  24         atmel,adc-ts-pressure-threshold = <10000>;
  25         status = "okay";
  26 };
  27
  28 &macb0 {
  29         phy-mode = "rmii";
  30         status = "okay";
  31 };
  32
  33 &mmc1 {
  34         pinctrl-0 = <
  35                 &pinctrl_mmc1_slot0_clk_cmd_dat0
  36                 &pinctrl_mmc1_slot0_dat1_3>;
  37         pinctrl-names = "default";
  38         status = "okay";
  39
  40         slot@0 {
  41                 reg = <0>;
  42                 bus-width = <4>;
  43                 non-removable;
  44         };
  45 };
  46
  47 &rtc {
  48         status = "okay";
  49 };
  50
  51 &usart1 {
  52         status = "okay";
  53 };
  54
  55 &usart2 {
  56         status = "okay";
  57 };
  58
  59 &usb0 {
  60         num-ports = <3>;
  61         atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
  62                            &pioD 19 GPIO_ACTIVE_LOW
  63                            &pioD 20 GPIO_ACTIVE_LOW
  64                           >;
  65         status = "okay";
  66 };
  67
  68 &usb1 {
  69         status = "okay";
  70 };
  71
  72 &usb2 {
  73         atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
  74         status = "okay";
  75 };