Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
[linux/fpc-iii.git] / arch / arm / boot / dts / bcm47094-dlink-dir-885l.dts
blob911c65fbf2510cddb06d1c5dc227f044d1ed6658
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /*
3  * Broadcom BCM470X / BCM5301X ARM platform code.
4  * DTS for D-Link DIR-885L
5  *
6  * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
7  */
9 /dts-v1/;
11 #include "bcm47094.dtsi"
12 #include "bcm5301x-nand-cs0-bch1.dtsi"
14 / {
15         compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
16         model = "D-Link DIR-885L";
18         chosen {
19                 bootargs = "console=ttyS0,115200 earlycon";
20         };
22         memory@0 {
23                 device_type = "memory";
24                 reg = <0x00000000 0x08000000
25                        0x88000000 0x08000000>;
26         };
28         nand: nand@18028000 {
29                 nandcs@0 {
30                         partitions {
31                                 compatible = "fixed-partitions";
32                                 #address-cells = <1>;
33                                 #size-cells = <1>;
35                                 partition@0 {
36                                         label = "firmware";
37                                         reg = <0x00000000 0x08000000>;
38                                 };
39                         };
40                 };
41         };
43         leds {
44                 compatible = "gpio-leds";
46                 power-white {
47                         label = "bcm53xx:white:power";
48                         gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
49                         linux,default-trigger = "default-on";
50                 };
52                 wan-white {
53                         label = "bcm53xx:white:wan";
54                         gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
55                 };
57                 power-amber {
58                         label = "bcm53xx:amber:power";
59                         gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
60                 };
62                 wan-amber {
63                         label = "bcm53xx:amber:wan";
64                         gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
65                 };
67                 usb3-white {
68                         label = "bcm53xx:white:usb3";
69                         gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
70                         trigger-sources = <&ohci_port1>, <&ehci_port1>,
71                                           <&xhci_port1>;
72                         linux,default-trigger = "usbport";
73                 };
75                 2ghz {
76                         label = "bcm53xx:white:2ghz";
77                         gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
78                 };
80                 5ghz {
81                         label = "bcm53xx:white:5ghz";
82                         gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
83                 };
84         };
86         gpio-keys {
87                 compatible = "gpio-keys";
89                 wps {
90                         label = "WPS";
91                         linux,code = <KEY_WPS_BUTTON>;
92                         gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
93                 };
95                 /* Switch: router / extender */
96                 extender {
97                         label = "Extender";
98                         linux,code = <BTN_0>;
99                         gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
100                 };
102                 restart {
103                         label = "Reset";
104                         linux,code = <KEY_RESTART>;
105                         gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
106                 };
107         };
110 &usb3 {
111         vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
114 &spi_nor {
115         status = "okay";
118 &usb3_phy {
119         status = "okay";