arch/arm/boot/dts/bcm7445.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include <dt-bindings/interrupt-controller/arm-gic.h>
   3
   4 / {
   5         #address-cells = <2>;
   6         #size-cells = <2>;
   7         model = "Broadcom STB (bcm7445)";
   8         compatible = "brcm,bcm7445", "brcm,brcmstb";
   9         interrupt-parent = <&gic>;
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,115200 earlyprintk";
  13         };
  14
  15         cpus {
  16                 #address-cells = <1>;
  17                 #size-cells = <0>;
  18
  19                 cpu@0 {
  20                         compatible = "brcm,brahma-b15";
  21                         device_type = "cpu";
  22                         enable-method = "brcm,brahma-b15";
  23                         reg = <0>;
  24                 };
  25
  26                 cpu@1 {
  27                         compatible = "brcm,brahma-b15";
  28                         device_type = "cpu";
  29                         enable-method = "brcm,brahma-b15";
  30                         reg = <1>;
  31                 };
  32
  33                 cpu@2 {
  34                         compatible = "brcm,brahma-b15";
  35                         device_type = "cpu";
  36                         enable-method = "brcm,brahma-b15";
  37                         reg = <2>;
  38                 };
  39
  40                 cpu@3 {
  41                         compatible = "brcm,brahma-b15";
  42                         device_type = "cpu";
  43                         enable-method = "brcm,brahma-b15";
  44                         reg = <3>;
  45                 };
  46         };
  47
  48         gic: interrupt-controller@ffd00000 {
  49                 compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic";
  50                 reg = <0x00 0xffd01000 0x00 0x1000>,
  51                       <0x00 0xffd02000 0x00 0x2000>,
  52                       <0x00 0xffd04000 0x00 0x2000>,
  53                       <0x00 0xffd06000 0x00 0x2000>;
  54                 interrupt-controller;
  55                 #interrupt-cells = <3>;
  56         };
  57
  58         timer {
  59                 compatible = "arm,armv7-timer";
  60                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
  61                              <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
  62                              <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
  63                              <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
  64         };
  65
  66         rdb@f0000000 {
  67                 #address-cells = <1>;
  68                 #size-cells = <1>;
  69                 compatible = "simple-bus";
  70                 ranges = <0 0x00 0xf0000000 0x1000000>;
  71
  72                 serial@40ab00 {
  73                         compatible = "ns16550a";
  74                         reg = <0x40ab00 0x20>;
  75                         reg-shift = <2>;
  76                         reg-io-width = <4>;
  77                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
  78                         clock-frequency = <81000000>;
  79                 };
  80
  81                 sun_top_ctrl: syscon@404000 {
  82                         compatible = "brcm,bcm7445-sun-top-ctrl",
  83                                      "syscon";
  84                         reg = <0x404000 0x51c>;
  85                 };
  86
  87                 hif_cpubiuctrl: syscon@3e2400 {
  88                         compatible = "brcm,bcm7445-hif-cpubiuctrl",
  89                                      "syscon";
  90                         reg = <0x3e2400 0x5b4>;
  91                 };
  92
  93                 hif_continuation: syscon@452000 {
  94                         compatible = "brcm,bcm7445-hif-continuation",
  95                                      "syscon";
  96                         reg = <0x452000 0x100>;
  97                 };
  98
  99                 irq0_intc: interrupt-controller@40a780 {
 100                         compatible = "brcm,bcm7120-l2-intc";
 101                         interrupt-parent = <&gic>;
 102                         #interrupt-cells = <1>;
 103                         reg = <0x40a780 0x8>;
 104                         interrupt-controller;
 105                         interrupts = <GIC_SPI 0x45 0x0>,
 106                                      <GIC_SPI 0x43 0x0>;
 107                         brcm,int-map-mask = <0x25c>, <0x7000000>;
 108                         brcm,int-fwd-mask = <0x70000>;
 109                 };
 110
 111                 irq0_aon_intc: interrupt-controller@417280 {
 112                         compatible = "brcm,bcm7120-l2-intc";
 113                         reg = <0x417280 0x8>;
 114                         interrupt-parent = <&gic>;
 115                         #interrupt-cells = <1>;
 116                         interrupt-controller;
 117                         interrupts = <GIC_SPI 0x46 0x0>,
 118                                      <GIC_SPI 0x44 0x0>,
 119                                      <GIC_SPI 0x49 0x0>;
 120                         brcm,int-map-mask = <0x1e3 0x18000000 0x100000>;
 121                         brcm,int-fwd-mask = <0x0>;
 122                         brcm,irq-can-wake;
 123                 };
 124
 125                 hif_intr2_intc: interrupt-controller@3e1000 {
 126                         compatible = "brcm,l2-intc";
 127                         reg = <0x3e1000 0x30>;
 128                         interrupt-controller;
 129                         #interrupt-cells = <1>;
 130                         interrupts = <GIC_SPI 0x20 0x0>;
 131                         interrupt-parent = <&gic>;
 132                         interrupt-names = "hif";
 133                 };
 134
 135                 aon_pm_l2_intc: interrupt-controller@410640 {
 136                         compatible = "brcm,l2-intc";
 137                         reg = <0x410640 0x30>;
 138                         interrupt-controller;
 139                         #interrupt-cells = <1>;
 140                         interrupts = <GIC_SPI 0x40 0x0>;
 141                         interrupt-parent = <&gic>;
 142                         brcm,irq-can-wake;
 143                 };
 144
 145                 aon-ctrl@410000 {
 146                         compatible = "brcm,brcmstb-aon-ctrl";
 147                         reg = <0x410000 0x200>, <0x410200 0x400>;
 148                         reg-names = "aon-ctrl", "aon-sram";
 149                 };
 150
 151                 nand: nand@3e2800 {
 152                         status = "disabled";
 153                         #address-cells = <1>;
 154                         #size-cells = <0>;
 155                         compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
 156                         reg-names = "nand", "flash-dma";
 157                         reg = <0x3e2800 0x600>, <0x3e3000 0x2c>;
 158                         interrupt-parent = <&hif_intr2_intc>;
 159                         interrupts = <24>, <4>;
 160                         interrupt-names = "nand_ctlrdy", "flash_dma_done";
 161                 };
 162
 163                 sata@45a000 {
 164                         compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
 165                         reg-names = "ahci", "top-ctrl";
 166                         reg = <0x45a000 0xa9c>, <0x458040 0x24>;
 167                         interrupts = <GIC_SPI 30 0>;
 168                         #address-cells = <1>;
 169                         #size-cells = <0>;
 170
 171                         sata0: sata-port@0 {
 172                                 reg = <0>;
 173                                 phys = <&sata_phy0>;
 174                         };
 175
 176                         sata1: sata-port@1 {
 177                                 reg = <1>;
 178                                 phys = <&sata_phy1>;
 179                         };
 180                 };
 181
 182                 sata_phy: sata-phy@458100 {
 183                         compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
 184                         reg = <0x458100 0x1f00>;
 185                         reg-names = "phy";
 186                         #address-cells = <0x1>;
 187                         #size-cells = <0x0>;
 188
 189                         sata_phy0: sata-phy@0 {
 190                                 reg = <0>;
 191                                 #phy-cells = <0>;
 192                         };
 193
 194                         sata_phy1: sata-phy@1 {
 195                                 reg = <1>;
 196                                 #phy-cells = <0>;
 197                         };
 198                 };
 199
 200                 upg_gio: gpio@40a700 {
 201                         compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
 202                         reg = <0x40a700 0x80>;
 203                         #gpio-cells = <2>;
 204                         #interrupt-cells = <2>;
 205                         gpio-controller;
 206                         interrupt-controller;
 207                         interrupt-parent = <&irq0_intc>;
 208                         interrupts = <6>;
 209                         brcm,gpio-bank-widths = <32 32 32 24>;
 210                 };
 211
 212                 upg_gio_aon: gpio@4172c0 {
 213                         compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
 214                         reg = <0x4172c0 0x40>;
 215                         #gpio-cells = <2>;
 216                         #interrupt-cells = <2>;
 217                         gpio-controller;
 218                         interrupt-controller;
 219                         interrupts-extended = <&irq0_aon_intc 0x6>,
 220                                               <&aon_pm_l2_intc 0x5>;
 221                         wakeup-source;
 222                         brcm,gpio-bank-widths = <18 4>;
 223                 };
 224
 225         };
 226
 227         memory_controllers@f1100000 {
 228                 compatible = "simple-bus";
 229                 ranges = <0x0 0x0 0xf1100000 0x200000>;
 230                 #address-cells = <1>;
 231                 #size-cells = <1>;
 232
 233                 memc@0 {
 234                         compatible = "brcm,brcmstb-memc", "simple-bus";
 235                         #address-cells = <1>;
 236                         #size-cells = <1>;
 237                         ranges = <0x0 0x0 0x80000>;
 238
 239                         memc-ddr@2000 {
 240                                 compatible = "brcm,brcmstb-memc-ddr";
 241                                 reg = <0x2000 0x800>;
 242                         };
 243
 244                         ddr-phy@6000 {
 245                                 compatible = "brcm,brcmstb-ddr-phy-v240.1";
 246                                 reg = <0x6000 0x21c>;
 247                                 };
 248
 249                         shimphy@8000 {
 250                                 compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
 251                                 reg = <0x8000 0xe4>;
 252                         };
 253                 };
 254
 255                 memc@80000 {
 256                         compatible = "brcm,brcmstb-memc", "simple-bus";
 257                         #address-cells = <1>;
 258                         #size-cells = <1>;
 259                         ranges = <0x0 0x80000 0x80000>;
 260
 261                         memc-ddr@2000 {
 262                                 compatible = "brcm,brcmstb-memc-ddr";
 263                                 reg = <0x2000 0x800>;
 264                         };
 265
 266                         ddr-phy@6000 {
 267                                 compatible = "brcm,brcmstb-ddr-phy-v240.1";
 268                                 reg = <0x6000 0x21c>;
 269                         };
 270
 271                         shimphy@8000 {
 272                                 compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
 273                                 reg = <0x8000 0xe4>;
 274                         };
 275                 };
 276
 277                 memc@100000 {
 278                         compatible = "brcm,brcmstb-memc", "simple-bus";
 279                         #address-cells = <1>;
 280                         #size-cells = <1>;
 281                         ranges = <0x0 0x100000 0x80000>;
 282
 283                         memc-ddr@2000 {
 284                                 compatible = "brcm,brcmstb-memc-ddr";
 285                                 reg = <0x2000 0x800>;
 286                         };
 287
 288                         ddr-phy@6000 {
 289                                 compatible = "brcm,brcmstb-ddr-phy-v240.1";
 290                                 reg = <0x6000 0x21c>;
 291                         };
 292
 293                         shimphy@8000 {
 294                                 compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
 295                                 reg = <0x8000 0xe4>;
 296                         };
 297                 };
 298         };
 299
 300         sram@ffe00000 {
 301                 compatible = "brcm,boot-sram", "mmio-sram";
 302                 reg = <0x0 0xffe00000 0x0 0x10000>;
 303         };
 304
 305         smpboot {
 306                 compatible = "brcm,brcmstb-smpboot";
 307                 syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
 308                 syscon-cont = <&hif_continuation>;
 309         };
 310
 311         reboot {
 312                 compatible = "brcm,brcmstb-reboot";
 313                 syscon = <&sun_top_ctrl 0x304 0x308>;
 314         };
 315 };