arch/arm/boot/dts/dra72-evm-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
   4  */
   5 /dts-v1/;
   6
   7 #include "dra72x.dtsi"
   8 #include "dra7-ipu-dsp-common.dtsi"
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/clock/ti-dra7-atl.h>
  11
  12 / {
  13         compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
  14
  15         aliases {
  16                 display0 = &hdmi0;
  17         };
  18
  19         chosen {
  20                 stdout-path = &uart1;
  21         };
  22
  23         evm_12v0: fixedregulator-evm12v0 {
  24                 /* main supply */
  25                 compatible = "regulator-fixed";
  26                 regulator-name = "evm_12v0";
  27                 regulator-min-microvolt = <12000000>;
  28                 regulator-max-microvolt = <12000000>;
  29                 regulator-always-on;
  30                 regulator-boot-on;
  31         };
  32
  33         evm_5v0: fixedregulator-evm5v0 {
  34                 /* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
  35                 /* Output 1 of LM5140QRWGTQ1 on dra71-evm */
  36                 compatible = "regulator-fixed";
  37                 regulator-name = "evm_5v0";
  38                 regulator-min-microvolt = <5000000>;
  39                 regulator-max-microvolt = <5000000>;
  40                 vin-supply = <&evm_12v0>;
  41                 regulator-always-on;
  42                 regulator-boot-on;
  43         };
  44
  45         evm_3v6: fixedregulator-evm_3v6 {
  46                 compatible = "regulator-fixed";
  47                 regulator-name = "evm_3v6";
  48                 regulator-min-microvolt = <3600000>;
  49                 regulator-max-microvolt = <3600000>;
  50                 vin-supply = <&evm_5v0>;
  51                 regulator-always-on;
  52                 regulator-boot-on;
  53         };
  54
  55         vsys_3v3: fixedregulator-vsys3v3 {
  56                 /* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
  57                 /* Output 2 of LM5140QRWGTQ1 on dra71-evm */
  58                 compatible = "regulator-fixed";
  59                 regulator-name = "vsys_3v3";
  60                 regulator-min-microvolt = <3300000>;
  61                 regulator-max-microvolt = <3300000>;
  62                 vin-supply = <&evm_12v0>;
  63                 regulator-always-on;
  64                 regulator-boot-on;
  65         };
  66
  67         evm_3v3_sw: fixedregulator-evm_3v3 {
  68                 /* TPS22965DSG */
  69                 compatible = "regulator-fixed";
  70                 regulator-name = "evm_3v3";
  71                 regulator-min-microvolt = <3300000>;
  72                 regulator-max-microvolt = <3300000>;
  73                 vin-supply = <&vsys_3v3>;
  74                 regulator-always-on;
  75                 regulator-boot-on;
  76         };
  77
  78         aic_dvdd: fixedregulator-aic_dvdd {
  79                 /* TPS77018DBVT */
  80                 compatible = "regulator-fixed";
  81                 regulator-name = "aic_dvdd";
  82                 vin-supply = <&evm_3v3_sw>;
  83                 regulator-min-microvolt = <1800000>;
  84                 regulator-max-microvolt = <1800000>;
  85         };
  86
  87         evm_3v3_sd: fixedregulator-sd {
  88                 compatible = "regulator-fixed";
  89                 regulator-name = "evm_3v3_sd";
  90                 regulator-min-microvolt = <3300000>;
  91                 regulator-max-microvolt = <3300000>;
  92                 vin-supply = <&evm_3v3_sw>;
  93                 enable-active-high;
  94                 gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
  95         };
  96
  97         extcon_usb1: extcon_usb1 {
  98                 compatible = "linux,extcon-usb-gpio";
  99                 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 100         };
 101
 102         extcon_usb2: extcon_usb2 {
 103                 compatible = "linux,extcon-usb-gpio";
 104                 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 105         };
 106
 107         hdmi0: connector {
 108                 compatible = "hdmi-connector";
 109                 label = "hdmi";
 110
 111                 type = "a";
 112
 113                 port {
 114                         hdmi_connector_in: endpoint {
 115                                 remote-endpoint = <&tpd12s015_out>;
 116                         };
 117                 };
 118         };
 119
 120         tpd12s015: encoder {
 121                 compatible = "ti,tpd12s015";
 122
 123                 gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
 124                         <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
 125                         <&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
 126
 127                 ports {
 128                         #address-cells = <1>;
 129                         #size-cells = <0>;
 130
 131                         port@0 {
 132                                 reg = <0>;
 133
 134                                 tpd12s015_in: endpoint {
 135                                         remote-endpoint = <&hdmi_out>;
 136                                 };
 137                         };
 138
 139                         port@1 {
 140                                 reg = <1>;
 141
 142                                 tpd12s015_out: endpoint {
 143                                         remote-endpoint = <&hdmi_connector_in>;
 144                                 };
 145                         };
 146                 };
 147         };
 148
 149         sound0: sound0 {
 150                 compatible = "simple-audio-card";
 151                 simple-audio-card,name = "DRA7xx-EVM";
 152                 simple-audio-card,widgets =
 153                         "Headphone", "Headphone Jack",
 154                         "Line", "Line Out",
 155                         "Microphone", "Mic Jack",
 156                         "Line", "Line In";
 157                 simple-audio-card,routing =
 158                         "Headphone Jack",       "HPLOUT",
 159                         "Headphone Jack",       "HPROUT",
 160                         "Line Out",             "LLOUT",
 161                         "Line Out",             "RLOUT",
 162                         "MIC3L",                "Mic Jack",
 163                         "MIC3R",                "Mic Jack",
 164                         "Mic Jack",             "Mic Bias",
 165                         "LINE1L",               "Line In",
 166                         "LINE1R",               "Line In";
 167                 simple-audio-card,format = "dsp_b";
 168                 simple-audio-card,bitclock-master = <&sound0_master>;
 169                 simple-audio-card,frame-master = <&sound0_master>;
 170                 simple-audio-card,bitclock-inversion;
 171
 172                 sound0_master: simple-audio-card,cpu {
 173                         sound-dai = <&mcasp3>;
 174                         system-clock-frequency = <5644800>;
 175                 };
 176
 177                 simple-audio-card,codec {
 178                         sound-dai = <&tlv320aic3106>;
 179                         clocks = <&atl_clkin2_ck>;
 180                 };
 181         };
 182
 183         vmmcwl_fixed: fixedregulator-mmcwl {
 184                 compatible = "regulator-fixed";
 185                 regulator-name = "vmmcwl_fixed";
 186                 regulator-min-microvolt = <1800000>;
 187                 regulator-max-microvolt = <1800000>;
 188                 gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
 189                 enable-active-high;
 190         };
 191
 192         clk_ov5640_fixed: clock {
 193                 compatible = "fixed-clock";
 194                 #clock-cells = <0>;
 195                 clock-frequency = <24000000>;
 196         };
 197 };
 198
 199 &dra7_pmx_core {
 200         dcan1_pins_default: dcan1_pins_default {
 201                 pinctrl-single,pins = <
 202                         DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
 203                         DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1)  /* wakeup0.dcan1_rx */
 204                 >;
 205         };
 206
 207         dcan1_pins_sleep: dcan1_pins_sleep {
 208                 pinctrl-single,pins = <
 209                         DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
 210                         DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
 211                 >;
 212         };
 213 };
 214
 215 &i2c1 {
 216         status = "okay";
 217         clock-frequency = <400000>;
 218
 219         pcf_lcd: gpio@20 {
 220                 compatible = "nxp,pcf8575";
 221                 reg = <0x20>;
 222                 gpio-controller;
 223                 #gpio-cells = <2>;
 224                 interrupt-controller;
 225                 #interrupt-cells = <2>;
 226         };
 227
 228         pcf_gpio_21: gpio@21 {
 229                 compatible = "ti,pcf8575", "nxp,pcf8575";
 230                 reg = <0x21>;
 231                 lines-initial-states = <0x1408>;
 232                 gpio-controller;
 233                 #gpio-cells = <2>;
 234                 interrupt-controller;
 235                 #interrupt-cells = <2>;
 236         };
 237
 238         tlv320aic3106: tlv320aic3106@19 {
 239                 #sound-dai-cells = <0>;
 240                 compatible = "ti,tlv320aic3106";
 241                 reg = <0x19>;
 242                 adc-settle-ms = <40>;
 243                 ai3x-micbias-vg = <1>;          /* 2.0V */
 244                 status = "okay";
 245
 246                 /* Regulators */
 247                 AVDD-supply = <&evm_3v3_sw>;
 248                 IOVDD-supply = <&evm_3v3_sw>;
 249                 DRVDD-supply = <&evm_3v3_sw>;
 250                 DVDD-supply = <&aic_dvdd>;
 251         };
 252 };
 253
 254 &i2c5 {
 255         status = "okay";
 256         clock-frequency = <400000>;
 257
 258         pcf_hdmi: pcf8575@26 {
 259                 compatible = "ti,pcf8575", "nxp,pcf8575";
 260                 reg = <0x26>;
 261                 gpio-controller;
 262                 #gpio-cells = <2>;
 263                 /*
 264                  * initial state is used here to keep the mdio interface
 265                  * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
 266                  * VIN2_S0 driven high otherwise Ethernet stops working
 267                  * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
 268                  */
 269                 lines-initial-states = <0x0f2b>;
 270
 271                 p1 {
 272                         /* vin6_sel_s0: high: VIN6, low: audio */
 273                         gpio-hog;
 274                         gpios = <1 GPIO_ACTIVE_HIGH>;
 275                         output-low;
 276                         line-name = "vin6_sel_s0";
 277                 };
 278         };
 279
 280         ov5640@3c {
 281                 compatible = "ovti,ov5640";
 282                 reg = <0x3c>;
 283
 284                 clocks = <&clk_ov5640_fixed>;
 285                 clock-names = "xclk";
 286
 287                 port {
 288                         csi2_cam0: endpoint {
 289                                 remote-endpoint = <&csi2_phy0>;
 290                                 clock-lanes = <0>;
 291                                 data-lanes = <1 2>;
 292                         };
 293                 };
 294         };
 295
 296 };
 297
 298 &uart1 {
 299         status = "okay";
 300         interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 301                               <&dra7_pmx_core 0x3e0>;
 302 };
 303
 304 &elm {
 305         status = "okay";
 306 };
 307
 308 &gpmc {
 309         /*
 310          * For the existing IOdelay configuration via U-Boot we don't
 311          * support NAND on dra72-evm. Keep it disabled. Enabling it
 312          * requires a different configuration by U-Boot.
 313          */
 314         status = "disabled";
 315         ranges = <0 0 0x08000000 0x01000000>;   /* minimum GPMC partition = 16MB */
 316         nand@0,0 {
 317                 /* To use NAND, DIP switch SW5 must be set like so:
 318                  * SW5.1 (NAND_SELn) = ON (LOW)
 319                  * SW5.9 (GPMC_WPN) = OFF (HIGH)
 320                  */
 321                 compatible = "ti,omap2-nand";
 322                 reg = <0 0 4>;          /* device IO registers */
 323                 interrupt-parent = <&gpmc>;
 324                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 325                              <1 IRQ_TYPE_NONE>; /* termcount */
 326                 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
 327                 ti,nand-xfer-type = "prefetch-dma";
 328                 ti,nand-ecc-opt = "bch8";
 329                 ti,elm-id = <&elm>;
 330                 nand-bus-width = <16>;
 331                 gpmc,device-width = <2>;
 332                 gpmc,sync-clk-ps = <0>;
 333                 gpmc,cs-on-ns = <0>;
 334                 gpmc,cs-rd-off-ns = <80>;
 335                 gpmc,cs-wr-off-ns = <80>;
 336                 gpmc,adv-on-ns = <0>;
 337                 gpmc,adv-rd-off-ns = <60>;
 338                 gpmc,adv-wr-off-ns = <60>;
 339                 gpmc,we-on-ns = <10>;
 340                 gpmc,we-off-ns = <50>;
 341                 gpmc,oe-on-ns = <4>;
 342                 gpmc,oe-off-ns = <40>;
 343                 gpmc,access-ns = <40>;
 344                 gpmc,wr-access-ns = <80>;
 345                 gpmc,rd-cycle-ns = <80>;
 346                 gpmc,wr-cycle-ns = <80>;
 347                 gpmc,bus-turnaround-ns = <0>;
 348                 gpmc,cycle2cycle-delay-ns = <0>;
 349                 gpmc,clk-activation-ns = <0>;
 350                 gpmc,wr-data-mux-bus-ns = <0>;
 351                 /* MTD partition table */
 352                 /* All SPL-* partitions are sized to minimal length
 353                  * which can be independently programmable. For
 354                  * NAND flash this is equal to size of erase-block */
 355                 #address-cells = <1>;
 356                 #size-cells = <1>;
 357                 partition@0 {
 358                         label = "NAND.SPL";
 359                         reg = <0x00000000 0x000020000>;
 360                 };
 361                 partition@1 {
 362                         label = "NAND.SPL.backup1";
 363                         reg = <0x00020000 0x00020000>;
 364                 };
 365                 partition@2 {
 366                         label = "NAND.SPL.backup2";
 367                         reg = <0x00040000 0x00020000>;
 368                 };
 369                 partition@3 {
 370                         label = "NAND.SPL.backup3";
 371                         reg = <0x00060000 0x00020000>;
 372                 };
 373                 partition@4 {
 374                         label = "NAND.u-boot-spl-os";
 375                         reg = <0x00080000 0x00040000>;
 376                 };
 377                 partition@5 {
 378                         label = "NAND.u-boot";
 379                         reg = <0x000c0000 0x00100000>;
 380                 };
 381                 partition@6 {
 382                         label = "NAND.u-boot-env";
 383                         reg = <0x001c0000 0x00020000>;
 384                 };
 385                 partition@7 {
 386                         label = "NAND.u-boot-env.backup1";
 387                         reg = <0x001e0000 0x00020000>;
 388                 };
 389                 partition@8 {
 390                         label = "NAND.kernel";
 391                         reg = <0x00200000 0x00800000>;
 392                 };
 393                 partition@9 {
 394                         label = "NAND.file-system";
 395                         reg = <0x00a00000 0x0f600000>;
 396                 };
 397         };
 398 };
 399
 400 &omap_dwc3_1 {
 401         extcon = <&extcon_usb1>;
 402 };
 403
 404 &omap_dwc3_2 {
 405         extcon = <&extcon_usb2>;
 406 };
 407
 408 &usb1 {
 409         dr_mode = "otg";
 410         extcon = <&extcon_usb1>;
 411 };
 412
 413 &usb2 {
 414         dr_mode = "host";
 415         extcon = <&extcon_usb2>;
 416 };
 417
 418 &mmc1 {
 419         status = "okay";
 420         pinctrl-names = "default";
 421         pinctrl-0 = <&mmc1_pins_default>;
 422         vmmc-supply = <&evm_3v3_sd>;
 423         bus-width = <4>;
 424         /*
 425          * SDCD signal is not being used here - using the fact that GPIO mode
 426          * is a viable alternative
 427          */
 428         cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
 429         max-frequency = <192000000>;
 430 };
 431
 432 &mmc2 {
 433         /* SW5-3 in ON position */
 434         status = "okay";
 435         pinctrl-names = "default";
 436         pinctrl-0 = <&mmc2_pins_default>;
 437         bus-width = <8>;
 438         non-removable;
 439         max-frequency = <192000000>;
 440 };
 441
 442 &mmc4 {
 443         status = "okay";
 444         vmmc-supply = <&evm_3v6>;
 445         vqmmc-supply = <&vmmcwl_fixed>;
 446         bus-width = <4>;
 447         cap-power-off-card;
 448         keep-power-in-suspend;
 449         non-removable;
 450         pinctrl-names = "default", "hs", "sdr12", "sdr25";
 451         pinctrl-0 = <&mmc4_pins_default>;
 452         pinctrl-1 = <&mmc4_pins_default>;
 453         pinctrl-2 = <&mmc4_pins_default>;
 454         pinctrl-3 = <&mmc4_pins_default>;
 455         #address-cells = <1>;
 456         #size-cells = <0>;
 457         wifi@2 {
 458                 compatible = "ti,wl1835";
 459                 reg = <2>;
 460                 interrupt-parent = <&gpio5>;
 461                 interrupts = <7 IRQ_TYPE_EDGE_RISING>;
 462         };
 463 };
 464
 465 &dcan1 {
 466         status = "okay";
 467         pinctrl-names = "default", "sleep", "active";
 468         pinctrl-0 = <&dcan1_pins_sleep>;
 469         pinctrl-1 = <&dcan1_pins_sleep>;
 470         pinctrl-2 = <&dcan1_pins_default>;
 471 };
 472
 473 &qspi {
 474         status = "okay";
 475
 476         spi-max-frequency = <76800000>;
 477         m25p80@0 {
 478                 compatible = "s25fl256s1";
 479                 spi-max-frequency = <76800000>;
 480                 reg = <0>;
 481                 spi-tx-bus-width = <1>;
 482                 spi-rx-bus-width = <4>;
 483                 #address-cells = <1>;
 484                 #size-cells = <1>;
 485
 486                 /* MTD partition table.
 487                  * The ROM checks the first four physical blocks
 488                  * for a valid file to boot and the flash here is
 489                  * 64KiB block size.
 490                  */
 491                 partition@0 {
 492                         label = "QSPI.SPL";
 493                         reg = <0x00000000 0x000010000>;
 494                 };
 495                 partition@1 {
 496                         label = "QSPI.SPL.backup1";
 497                         reg = <0x00010000 0x00010000>;
 498                 };
 499                 partition@2 {
 500                         label = "QSPI.SPL.backup2";
 501                         reg = <0x00020000 0x00010000>;
 502                 };
 503                 partition@3 {
 504                         label = "QSPI.SPL.backup3";
 505                         reg = <0x00030000 0x00010000>;
 506                 };
 507                 partition@4 {
 508                         label = "QSPI.u-boot";
 509                         reg = <0x00040000 0x00100000>;
 510                 };
 511                 partition@5 {
 512                         label = "QSPI.u-boot-spl-os";
 513                         reg = <0x00140000 0x00080000>;
 514                 };
 515                 partition@6 {
 516                         label = "QSPI.u-boot-env";
 517                         reg = <0x001c0000 0x00010000>;
 518                 };
 519                 partition@7 {
 520                         label = "QSPI.u-boot-env.backup1";
 521                         reg = <0x001d0000 0x0010000>;
 522                 };
 523                 partition@8 {
 524                         label = "QSPI.kernel";
 525                         reg = <0x001e0000 0x0800000>;
 526                 };
 527                 partition@9 {
 528                         label = "QSPI.file-system";
 529                         reg = <0x009e0000 0x01620000>;
 530                 };
 531         };
 532 };
 533
 534 &dss {
 535         status = "okay";
 536 };
 537
 538 &hdmi {
 539         status = "okay";
 540
 541         port {
 542                 hdmi_out: endpoint {
 543                         remote-endpoint = <&tpd12s015_in>;
 544                 };
 545         };
 546 };
 547
 548 &atl {
 549         assigned-clocks = <&abe_dpll_sys_clk_mux>,
 550                           <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
 551                           <&dpll_abe_ck>,
 552                           <&dpll_abe_m2x2_ck>,
 553                           <&atl_clkin2_ck>;
 554         assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
 555         assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
 556
 557         status = "okay";
 558
 559         atl2 {
 560                 bws = <DRA7_ATL_WS_MCASP2_FSX>;
 561                 aws = <DRA7_ATL_WS_MCASP3_FSX>;
 562         };
 563 };
 564
 565 &mcasp3 {
 566         #sound-dai-cells = <0>;
 567
 568         assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
 569         assigned-clock-parents = <&atl_clkin2_ck>;
 570
 571         status = "okay";
 572
 573         op-mode = <0>;          /* MCASP_IIS_MODE */
 574         tdm-slots = <2>;
 575         /* 4 serializer */
 576         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 577                 1 2 0 0
 578         >;
 579         tx-num-evt = <32>;
 580         rx-num-evt = <32>;
 581 };
 582
 583 &pcie1_rc {
 584         status = "okay";
 585 };
 586
 587 &csi2_0 {
 588         csi2_phy0: endpoint {
 589                 remote-endpoint = <&csi2_cam0>;
 590                 clock-lanes = <0>;
 591                 data-lanes = <1 2>;
 592         };
 593 };