Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
[linux/fpc-iii.git] / arch / arm / boot / dts / exynos5422-cpus.dtsi
blob4b641b9b8179009bcfe37aa57f274acf5d7cdc80
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Samsung Exynos5422 SoC cpu device tree source
4  *
5  * Copyright (c) 2015 Samsung Electronics Co., Ltd.
6  *              http://www.samsung.com
7  *
8  * This file provides desired ordering for Exynos5422: CPU[0123] being the A7.
9  *
10  * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
11  * but particular boards choose different booting order.
12  *
13  * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
14  * booting cluster (big or LITTLE) is chosen by IROM code by reading
15  * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
16  * from the LITTLE: Cortex-A7.
17  */
19 / {
20         cpus {
21                 #address-cells = <1>;
22                 #size-cells = <0>;
24                 cpu0: cpu@100 {
25                         device_type = "cpu";
26                         compatible = "arm,cortex-a7";
27                         reg = <0x100>;
28                         clocks = <&clock CLK_KFC_CLK>;
29                         clock-frequency = <1000000000>;
30                         cci-control-port = <&cci_control0>;
31                         operating-points-v2 = <&cluster_a7_opp_table>;
32                         #cooling-cells = <2>; /* min followed by max */
33                         capacity-dmips-mhz = <539>;
34                         dynamic-power-coefficient = <90>;
35                 };
37                 cpu1: cpu@101 {
38                         device_type = "cpu";
39                         compatible = "arm,cortex-a7";
40                         reg = <0x101>;
41                         clocks = <&clock CLK_KFC_CLK>;
42                         clock-frequency = <1000000000>;
43                         cci-control-port = <&cci_control0>;
44                         operating-points-v2 = <&cluster_a7_opp_table>;
45                         #cooling-cells = <2>; /* min followed by max */
46                         capacity-dmips-mhz = <539>;
47                         dynamic-power-coefficient = <90>;
48                 };
50                 cpu2: cpu@102 {
51                         device_type = "cpu";
52                         compatible = "arm,cortex-a7";
53                         reg = <0x102>;
54                         clocks = <&clock CLK_KFC_CLK>;
55                         clock-frequency = <1000000000>;
56                         cci-control-port = <&cci_control0>;
57                         operating-points-v2 = <&cluster_a7_opp_table>;
58                         #cooling-cells = <2>; /* min followed by max */
59                         capacity-dmips-mhz = <539>;
60                         dynamic-power-coefficient = <90>;
61                 };
63                 cpu3: cpu@103 {
64                         device_type = "cpu";
65                         compatible = "arm,cortex-a7";
66                         reg = <0x103>;
67                         clocks = <&clock CLK_KFC_CLK>;
68                         clock-frequency = <1000000000>;
69                         cci-control-port = <&cci_control0>;
70                         operating-points-v2 = <&cluster_a7_opp_table>;
71                         #cooling-cells = <2>; /* min followed by max */
72                         capacity-dmips-mhz = <539>;
73                         dynamic-power-coefficient = <90>;
74                 };
76                 cpu4: cpu@0 {
77                         device_type = "cpu";
78                         compatible = "arm,cortex-a15";
79                         reg = <0x0>;
80                         clocks = <&clock CLK_ARM_CLK>;
81                         clock-frequency = <1800000000>;
82                         cci-control-port = <&cci_control1>;
83                         operating-points-v2 = <&cluster_a15_opp_table>;
84                         #cooling-cells = <2>; /* min followed by max */
85                         capacity-dmips-mhz = <1024>;
86                         dynamic-power-coefficient = <310>;
87                 };
89                 cpu5: cpu@1 {
90                         device_type = "cpu";
91                         compatible = "arm,cortex-a15";
92                         reg = <0x1>;
93                         clocks = <&clock CLK_ARM_CLK>;
94                         clock-frequency = <1800000000>;
95                         cci-control-port = <&cci_control1>;
96                         operating-points-v2 = <&cluster_a15_opp_table>;
97                         #cooling-cells = <2>; /* min followed by max */
98                         capacity-dmips-mhz = <1024>;
99                         dynamic-power-coefficient = <310>;
100                 };
102                 cpu6: cpu@2 {
103                         device_type = "cpu";
104                         compatible = "arm,cortex-a15";
105                         reg = <0x2>;
106                         clocks = <&clock CLK_ARM_CLK>;
107                         clock-frequency = <1800000000>;
108                         cci-control-port = <&cci_control1>;
109                         operating-points-v2 = <&cluster_a15_opp_table>;
110                         #cooling-cells = <2>; /* min followed by max */
111                         capacity-dmips-mhz = <1024>;
112                         dynamic-power-coefficient = <310>;
113                 };
115                 cpu7: cpu@3 {
116                         device_type = "cpu";
117                         compatible = "arm,cortex-a15";
118                         reg = <0x3>;
119                         clocks = <&clock CLK_ARM_CLK>;
120                         clock-frequency = <1800000000>;
121                         cci-control-port = <&cci_control1>;
122                         operating-points-v2 = <&cluster_a15_opp_table>;
123                         #cooling-cells = <2>; /* min followed by max */
124                         capacity-dmips-mhz = <1024>;
125                         dynamic-power-coefficient = <310>;
126                 };
127         };
130 &arm_a7_pmu {
131         interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
132         status = "okay";
135 &arm_a15_pmu {
136         interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
137         status = "okay";