Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
[linux/fpc-iii.git] / arch / arm / boot / dts / imx27-phytec-phycore-rdk.dts
blob344e77790152416ffe6a4f30753487d0c1d62752
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  */
5 #include "imx27-phytec-phycore-som.dtsi"
7 / {
8         model = "Phytec pcm970";
9         compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
11         chosen {
12                 stdout-path = &uart1;
13         };
15         display0: LQ035Q7 {
16                 model = "Sharp-LQ035Q7";
17                 bits-per-pixel = <16>;
18                 fsl,pcr = <0xf00080c0>;
20                 display-timings {
21                         native-mode = <&timing0>;
22                         timing0: 240x320 {
23                                 clock-frequency = <5500000>;
24                                 hactive = <240>;
25                                 vactive = <320>;
26                                 hback-porch = <5>;
27                                 hsync-len = <7>;
28                                 hfront-porch = <16>;
29                                 vback-porch = <7>;
30                                 vsync-len = <1>;
31                                 vfront-porch = <9>;
32                                 pixelclk-active = <1>;
33                                 hsync-active = <1>;
34                                 vsync-active = <1>;
35                                 de-active = <0>;
36                         };
37                 };
38         };
40         regulators {
41                 regulator@2 {
42                         compatible = "regulator-fixed";
43                         pinctrl-names = "default";
44                         pinctrl-0 = <&pinctrl_csien>;
45                         reg = <2>;
46                         regulator-name = "CSI_EN";
47                         regulator-min-microvolt = <3300000>;
48                         regulator-max-microvolt = <3300000>;
49                         gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
50                         regulator-always-on;
51                 };
52         };
54         usbphy {
55                 usbphy2: usbphy@2 {
56                         compatible = "usb-nop-xceiv";
57                         reg = <2>;
58                         vcc-supply = <&reg_5v0>;
59                         clocks = <&clks IMX27_CLK_DUMMY>;
60                         clock-names = "main_clk";
61                         #phy-cells = <0>;
62                 };
63         };
66 &cspi1 {
67         pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
68         cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
69                    <&gpio4 27 GPIO_ACTIVE_LOW>;
72 &fb {
73         pinctrl-names = "default";
74         pinctrl-0 = <&pinctrl_imxfb1>;
75         display = <&display0>;
76         lcd-supply = <&reg_5v0>;
77         fsl,dmacr = <0x00020010>;
78         fsl,lscr1 = <0x00120300>;
79         fsl,lpccr = <0x00a903ff>;
80         status = "okay";
83 &i2c1 {
84         clock-frequency = <400000>;
85         pinctrl-names = "default";
86         pinctrl-0 = <&pinctrl_i2c1>;
87         status = "okay";
89         camgpio: pca9536@41 {
90                 compatible = "nxp,pca9536";
91                 reg = <0x41>;
92                 gpio-controller;
93                 #gpio-cells = <2>;
94         };
97 &iomuxc {
98         imx27_phycore_rdk {
99                 pinctrl_csien: csiengrp {
100                         fsl,pins = <
101                                 MX27_PAD_USB_OC_B__GPIO2_24 0x0
102                         >;
103                 };
105                 pinctrl_cspi1cs1: cspi1cs1grp {
106                         fsl,pins = <
107                                 MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
108                         >;
109                 };
111                 pinctrl_imxfb1: imxfbgrp {
112                         fsl,pins = <
113                                 MX27_PAD_LD0__LD0 0x0
114                                 MX27_PAD_LD1__LD1 0x0
115                                 MX27_PAD_LD2__LD2 0x0
116                                 MX27_PAD_LD3__LD3 0x0
117                                 MX27_PAD_LD4__LD4 0x0
118                                 MX27_PAD_LD5__LD5 0x0
119                                 MX27_PAD_LD6__LD6 0x0
120                                 MX27_PAD_LD7__LD7 0x0
121                                 MX27_PAD_LD8__LD8 0x0
122                                 MX27_PAD_LD9__LD9 0x0
123                                 MX27_PAD_LD10__LD10 0x0
124                                 MX27_PAD_LD11__LD11 0x0
125                                 MX27_PAD_LD12__LD12 0x0
126                                 MX27_PAD_LD13__LD13 0x0
127                                 MX27_PAD_LD14__LD14 0x0
128                                 MX27_PAD_LD15__LD15 0x0
129                                 MX27_PAD_LD16__LD16 0x0
130                                 MX27_PAD_LD17__LD17 0x0
131                                 MX27_PAD_CLS__CLS 0x0
132                                 MX27_PAD_CONTRAST__CONTRAST 0x0
133                                 MX27_PAD_LSCLK__LSCLK 0x0
134                                 MX27_PAD_OE_ACD__OE_ACD 0x0
135                                 MX27_PAD_PS__PS 0x0
136                                 MX27_PAD_REV__REV 0x0
137                                 MX27_PAD_SPL_SPR__SPL_SPR 0x0
138                                 MX27_PAD_HSYNC__HSYNC 0x0
139                                 MX27_PAD_VSYNC__VSYNC 0x0
140                         >;
141                 };
143                 pinctrl_i2c1: i2c1grp {
144                         /* Add pullup to DATA line */
145                         fsl,pins = <
146                                 MX27_PAD_I2C_DATA__I2C_DATA     0x1
147                                 MX27_PAD_I2C_CLK__I2C_CLK       0x0
148                         >;
149                 };
151                 pinctrl_owire1: owire1grp {
152                         fsl,pins = <
153                                 MX27_PAD_RTCK__OWIRE 0x0
154                         >;
155                 };
157                 pinctrl_sdhc2: sdhc2grp {
158                         fsl,pins = <
159                                 MX27_PAD_SD2_CLK__SD2_CLK 0x0
160                                 MX27_PAD_SD2_CMD__SD2_CMD 0x0
161                                 MX27_PAD_SD2_D0__SD2_D0 0x0
162                                 MX27_PAD_SD2_D1__SD2_D1 0x0
163                                 MX27_PAD_SD2_D2__SD2_D2 0x0
164                                 MX27_PAD_SD2_D3__SD2_D3 0x0
165                                 MX27_PAD_SSI3_FS__GPIO3_28      0x0 /* WP */
166                                 MX27_PAD_SSI3_RXDAT__GPIO3_29   0x0 /* CD */
167                         >;
168                 };
170                 pinctrl_uart1: uart1grp {
171                         fsl,pins = <
172                                 MX27_PAD_UART1_TXD__UART1_TXD 0x0
173                                 MX27_PAD_UART1_RXD__UART1_RXD 0x0
174                                 MX27_PAD_UART1_CTS__UART1_CTS 0x0
175                                 MX27_PAD_UART1_RTS__UART1_RTS 0x0
176                         >;
177                 };
179                 pinctrl_uart2: uart2grp {
180                         fsl,pins = <
181                                 MX27_PAD_UART2_TXD__UART2_TXD 0x0
182                                 MX27_PAD_UART2_RXD__UART2_RXD 0x0
183                                 MX27_PAD_UART2_CTS__UART2_CTS 0x0
184                                 MX27_PAD_UART2_RTS__UART2_RTS 0x0
185                         >;
186                 };
188                 pinctrl_usbh2: usbh2grp {
189                         fsl,pins = <
190                                 MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
191                                 MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
192                                 MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
193                                 MX27_PAD_USBH2_STP__USBH2_STP 0x0
194                                 MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
195                                 MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
196                                 MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
197                                 MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
198                                 MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
199                                 MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
200                                 MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
201                                 MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
202                         >;
203                 };
205                 pinctrl_weim: weimgrp {
206                         fsl,pins = <
207                                 MX27_PAD_CS4_B__CS4_B           0x0 /* CS4 */
208                                 MX27_PAD_SD1_D1__GPIO5_19       0x0 /* CAN IRQ */
209                         >;
210                 };
211         };
214 &owire {
215         pinctrl-names = "default";
216         pinctrl-0 = <&pinctrl_owire1>;
217         status = "okay";
220 &pmicleds {
221         ledr1: led@3 {
222                 reg = <3>;
223                 label = "system:red1:user";
224         };
226         ledg1: led@4 {
227                 reg = <4>;
228                 label = "system:green1:user";
229         };
231         ledb1: led@5 {
232                 reg = <5>;
233                 label = "system:blue1:user";
234         };
236         ledr2: led@6 {
237                 reg = <6>;
238                 label = "system:red2:user";
239         };
241         ledg2: led@7 {
242                 reg = <7>;
243                 label = "system:green2:user";
244         };
246         ledb2: led@8 {
247                 reg = <8>;
248                 label = "system:blue2:user";
249         };
251         ledr3: led@9 {
252                 reg = <9>;
253                 label = "system:red3:nand";
254                 linux,default-trigger = "nand-disk";
255         };
257         ledg3: led@10 {
258                 reg = <10>;
259                 label = "system:green3:live";
260                 linux,default-trigger = "heartbeat";
261         };
263         ledb3: led@11 {
264                 reg = <11>;
265                 label = "system:blue3:cpu";
266                 linux,default-trigger = "cpu0";
267         };
270 &sdhci2 {
271         pinctrl-names = "default";
272         pinctrl-0 = <&pinctrl_sdhc2>;
273         bus-width = <4>;
274         cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
275         wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
276         vmmc-supply = <&vmmc1_reg>;
277         status = "okay";
280 &uart1 {
281         uart-has-rtscts;
282         pinctrl-names = "default";
283         pinctrl-0 = <&pinctrl_uart1>;
284         status = "okay";
287 &uart2 {
288         uart-has-rtscts;
289         pinctrl-names = "default";
290         pinctrl-0 = <&pinctrl_uart2>;
291         status = "okay";
294 &usbh2 {
295         pinctrl-names = "default";
296         pinctrl-0 = <&pinctrl_usbh2>;
297         dr_mode = "host";
298         phy_type = "ulpi";
299         vbus-supply = <&reg_5v0>;
300         fsl,usbphy = <&usbphy2>;
301         disable-over-current;
302         status = "okay";
305 &weim {
306         pinctrl-names = "default";
307         pinctrl-0 = <&pinctrl_weim>;
309         can@4,0 {
310                 compatible = "nxp,sja1000";
311                 reg = <4 0x00000000 0x00000100>;
312                 interrupt-parent = <&gpio5>;
313                 interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
314                 nxp,external-clock-frequency = <16000000>;
315                 nxp,tx-output-config = <0x16>;
316                 nxp,no-comparator-bypass;
317                 fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>;
318         };