Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
[linux/fpc-iii.git] / arch / arm / boot / dts / imx6dl-mamoj.dts
blob028951955bdee703ab42a56bf197292241df6b9c
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3  * Copyright (C) 2018 BTicino
4  * Copyright (C) 2018 Amarula Solutions B.V.
5  */
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include "imx6dl.dtsi"
12 / {
13         model = "BTicino i.MX6DL Mamoj board";
14         compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
16         /* Will be filled by the bootloader */
17         memory@10000000 {
18                 device_type = "memory";
19                 reg = <0x10000000 0>;
20         };
22         backlight_lcd: backlight-lcd {
23                 compatible = "pwm-backlight";
24                 pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
25                 brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
26                 default-brightness-level = <7>;
27         };
29         display: disp0 {
30                 compatible = "fsl,imx-parallel-display";
31                 #address-cells = <1>;
32                 #size-cells = <0>;
33                 interface-pix-fmt = "rgb24";
34                 pinctrl-names = "default";
35                 pinctrl-0 = <&pinctrl_ipu1_lcdif>;
36                 status = "okay";
38                 port@0 {
39                         reg = <0>;
41                         lcd_display_in: endpoint {
42                                 remote-endpoint = <&ipu1_di0_disp0>;
43                         };
44                 };
46                 port@1 {
47                         reg = <1>;
49                         lcd_display_out: endpoint {
50                                 remote-endpoint = <&lcd_panel_in>;
51                         };
52                 };
53         };
55         panel-lcd {
56                 compatible = "rocktech,rk070er9427";
57                 backlight = <&backlight_lcd>;
58                 power-supply = <&reg_lcd_lr>;
59                 pinctrl-names = "default";
60                 pinctrl-0 = <&pinctrl_ipu1_lcdif_pwr>;
62                 port {
63                         lcd_panel_in: endpoint {
64                                 remote-endpoint = <&lcd_display_out>;
65                         };
66                 };
67         };
69         reg_lcd_3v3: regulator-lcd-dvdd {
70                 compatible = "regulator-fixed";
71                 regulator-name = "lcd-dvdd";
72                 regulator-min-microvolt = <3300000>;
73                 regulator-max-microvolt = <3300000>;
74                 gpio = <&gpio3 1 0>;
75                 enable-active-high;
76                 startup-delay-us = <21000>;
77         };
79         reg_lcd_power: regulator-lcd-power {
80                 compatible = "regulator-fixed";
81                 regulator-name = "lcd-enable";
82                 regulator-min-microvolt = <3300000>;
83                 regulator-max-microvolt = <3300000>;
84                 gpio = <&gpio3 6 0>;
85                 enable-active-high;
86                 vin-supply = <&reg_lcd_3v3>;
87         };
89         reg_lcd_vgl: regulator-lcd-vgl {
90                 compatible = "regulator-fixed";
91                 regulator-name = "lcd-vgl";
92                 regulator-min-microvolt = <3300000>;
93                 regulator-max-microvolt = <3300000>;
94                 gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
95                 startup-delay-us = <6000>;
96                 enable-active-high;
97                 vin-supply = <&reg_lcd_power>;
98         };
100         reg_lcd_vgh: regulator-lcd-vgh {
101                 compatible = "regulator-fixed";
102                 regulator-name = "lcd-vgh";
103                 regulator-min-microvolt = <3300000>;
104                 regulator-max-microvolt = <3300000>;
105                 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
106                 startup-delay-us = <6000>;
107                 enable-active-high;
108                 vin-supply = <&reg_lcd_avdd>;
109         };
111         reg_lcd_vcom: regulator-lcd-vcom {
112                 compatible = "regulator-fixed";
113                 regulator-name = "lcd-vcom";
114                 regulator-min-microvolt = <3300000>;
115                 regulator-max-microvolt = <3300000>;
116                 gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;
117                 startup-delay-us = <11000>;
118                 enable-active-high;
119                 vin-supply = <&reg_lcd_vgh>;
120         };
122         reg_lcd_lr: regulator-lcd-lr {
123                 compatible = "regulator-fixed";
124                 regulator-name = "lcd-lr";
125                 regulator-min-microvolt = <3300000>;
126                 regulator-max-microvolt = <3300000>;
127                 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
128                 enable-active-high;
129                 vin-supply = <&reg_lcd_vcom>;
130         };
132         reg_lcd_avdd: regulator-lcd-avdd {
133                 compatible = "regulator-fixed";
134                 regulator-name = "lcd-avdd";
135                 regulator-min-microvolt = <10280000>;
136                 regulator-max-microvolt = <10280000>;
137                 gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
138                 startup-delay-us = <6000>;
139                 enable-active-high;
140                 vin-supply = <&reg_lcd_vgl>;
141         };
143         reg_usb_host: regulator-usb-vbus {
144                 compatible = "regulator-fixed";
145                 regulator-name = "usbhost-vbus";
146                 pinctrl-names = "default";
147                 pinctrl-0 = <&pinctrl_usbhost>;
148                 regulator-min-microvolt = <50000000>;
149                 regulator-max-microvolt = <50000000>;
150                 gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
151                 enable-active-high;
152         };
154         reg_wl18xx_vmmc:  regulator-wl18xx-vmcc {
155                 compatible = "regulator-fixed";
156                 regulator-name = "vwl1807";
157                 pinctrl-names = "default";
158                 pinctrl-0 = <&pinctrl_wlan>;
159                 regulator-min-microvolt = <1800000>;
160                 regulator-max-microvolt = <1800000>;
161                 gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
162                 startup-delay-us = <70000>;
163                 enable-active-high;
164         };
167 &fec {
168         pinctrl-names = "default";
169         pinctrl-0 = <&pinctrl_enet>;
170         phy-mode = "mii";
171         status = "okay";
174 &i2c3 {
175         clock-frequency = <400000>;
176         pinctrl-names = "default";
177         pinctrl-0 = <&pinctrl_i2c3>;
178         status = "okay";
181 &i2c4 {
182         clock-frequency = <100000>;
183         pinctrl-names = "default";
184         pinctrl-0 = <&pinctrl_i2c4>;
185         status = "okay";
187         pfuze100: pmic@8 {
188                 compatible = "fsl,pfuze100";
189                 reg = <0x08>;
191                 regulators {
192                         /* CPU vdd_arm core */
193                         sw1a_reg: sw1ab {
194                                 regulator-min-microvolt = <300000>;
195                                 regulator-max-microvolt = <1875000>;
196                                 regulator-boot-on;
197                                 regulator-always-on;
198                                 regulator-ramp-delay = <6250>;
199                         };
201                         /* SOC vdd_soc */
202                         sw1c_reg: sw1c {
203                                 regulator-min-microvolt = <300000>;
204                                 regulator-max-microvolt = <1875000>;
205                                 regulator-boot-on;
206                                 regulator-always-on;
207                                 regulator-ramp-delay = <6250>;
208                         };
210                         /* I/O power GEN_3V3 */
211                         sw2_reg: sw2 {
212                                 regulator-min-microvolt = <800000>;
213                                 regulator-max-microvolt = <3300000>;
214                                 regulator-boot-on;
215                                 regulator-always-on;
216                         };
218                         /* DDR memory */
219                         sw3a_reg: sw3a {
220                                 regulator-min-microvolt = <400000>;
221                                 regulator-max-microvolt = <1975000>;
222                                 regulator-boot-on;
223                                 regulator-always-on;
224                         };
226                         /* DDR memory */
227                         sw3b_reg: sw3b {
228                                 regulator-min-microvolt = <400000>;
229                                 regulator-max-microvolt = <1975000>;
230                                 regulator-boot-on;
231                                 regulator-always-on;
232                         };
234                         /* not used */
235                         sw4_reg: sw4 {
236                                 regulator-min-microvolt = <800000>;
237                                 regulator-max-microvolt = <3300000>;
238                         };
240                         /* not used */
241                         swbst_reg: swbst {
242                                 regulator-min-microvolt = <5000000>;
243                                 regulator-max-microvolt = <5150000>;
244                         };
246                         /* PMIC vsnvs. EX boot mode */
247                         snvs_reg: vsnvs {
248                                 regulator-min-microvolt = <1000000>;
249                                 regulator-max-microvolt = <3000000>;
250                                 regulator-boot-on;
251                                 regulator-always-on;
252                         };
254                         vref_reg: vrefddr {
255                                 regulator-boot-on;
256                                 regulator-always-on;
257                         };
259                         /* not used */
260                         vgen1_reg: vgen1 {
261                                 regulator-min-microvolt = <800000>;
262                                 regulator-max-microvolt = <1550000>;
263                         };
265                         /* not used */
266                         vgen2_reg: vgen2 {
267                                 regulator-min-microvolt = <800000>;
268                                 regulator-max-microvolt = <1550000>;
269                         };
271                         /* not used */
272                         vgen3_reg: vgen3 {
273                                 regulator-min-microvolt = <1800000>;
274                                 regulator-max-microvolt = <3300000>;
275                         };
277                         /* 1v8 general power */
278                         vgen4_reg: vgen4 {
279                                 regulator-min-microvolt = <1800000>;
280                                 regulator-max-microvolt = <3300000>;
281                                 regulator-always-on;
282                         };
284                         /* 2v8 general power IMX6 */
285                         vgen5_reg: vgen5 {
286                                 regulator-min-microvolt = <1800000>;
287                                 regulator-max-microvolt = <3300000>;
288                                 regulator-always-on;
289                         };
291                         /* 3v3 Ethernet */
292                         vgen6_reg: vgen6 {
293                                 regulator-min-microvolt = <1800000>;
294                                 regulator-max-microvolt = <3300000>;
295                                 regulator-always-on;
296                         };
297                 };
298         };
301 &ipu1_di0_disp0 {
302         remote-endpoint = <&lcd_display_in>;
305 &pwm3 {
306         #pwm-cells = <2>;
307         pinctrl-names = "default";
308         pinctrl-0 = <&pinctrl_pwm3>;
309         status = "okay";
312 &uart3 {
313         pinctrl-names = "default";
314         pinctrl-0 = <&pinctrl_uart3>;
315         status = "okay";
318 &usbh1 {
319         vbus-supply = <&reg_usb_host>;
320         status = "okay";
323 &usbotg {
324         dr_mode = "peripheral";
325         status = "okay";
328 &usdhc1 {
329         pinctrl-names = "default";
330         pinctrl-0 = <&pinctrl_usdhc1>;
331         bus-width = <4>;
332         vmmc-supply = <&reg_wl18xx_vmmc>;
333         no-1-8-v;
334         non-removable;
335         wakeup-source;
336         keep-power-in-suspend;
337         cap-power-off-card;
338         max-frequency = <25000000>;
339         #address-cells = <1>;
340         #size-cells = <0>;
341         status = "okay";
343         wlcore: wlcore@2 {
344                 compatible = "ti,wl1837";
345                 reg = <2>;
346                 interrupt-parent = <&gpio6>;
347                 interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
348                 tcxo-clock-frequency = <26000000>;
349         };
352 &usdhc3 {
353         pinctrl-names = "default";
354         pinctrl-0 = <&pinctrl_usdhc3>;
355         bus-width = <8>;
356         non-removable;
357         keep-power-in-suspend;
358         status = "okay";
361 &iomuxc {
362         pinctrl_enet: enetgrp {
363                 fsl,pins = <
364                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
365                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
366                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b1
367                         MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
368                         MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
369                         MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2      0x1b0b0
370                         MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3      0x1b0b0
371                         MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
372                         MX6QDL_PAD_GPIO_19__ENET_TX_ER          0x1b0b0
373                         MX6QDL_PAD_GPIO_18__ENET_RX_CLK         0x1b0b1
374                         MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
375                         MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
376                         MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2      0x1b0b0
377                         MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3      0x1b0b0
378                         MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
379                         MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
380                         MX6QDL_PAD_KEY_COL3__ENET_CRS           0x1b0b0
381                         MX6QDL_PAD_KEY_ROW1__ENET_COL           0x1b0b0
382                 >;
383         };
385         pinctrl_i2c3: i2c3grp {
386                 fsl,pins = <
387                         MX6QDL_PAD_GPIO_3__I2C3_SCL     0x4001b8b1
388                         MX6QDL_PAD_GPIO_6__I2C3_SDA     0x4001b8b1
389                 >;
390         };
392         pinctrl_i2c4: i2c4grp {
393                 fsl,pins = <
394                         MX6QDL_PAD_GPIO_7__I2C4_SCL     0x4001b8b1
395                         MX6QDL_PAD_GPIO_8__I2C4_SDA     0x4001b8b1
396                 >;
397         };
399         pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */
400                 fsl,pins = <
401                         MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */
402                         MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
403                         MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10 /* VDOUT_HSYNC */
404                         MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10 /* VDOUT_VSYNC */
405                         MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04        0x10 /* VDOUT_RESET */
406                         MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
407                         MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
408                         MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
409                         MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
410                         MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
411                         MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
412                         MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
413                         MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
414                         MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
415                         MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
416                         MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
417                         MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
418                         MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
419                         MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
420                         MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
421                         MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
422                         MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
423                         MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
424                         MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
425                         MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
426                         MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
427                         MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
428                         MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
429                         MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
430                 >;
431         };
433         pinctrl_ipu1_lcdif_pwr: ipu1lcdifpwrgrp {
434                 fsl,pins = <
435                         MX6QDL_PAD_EIM_DA1__GPIO3_IO01          0x40013058 /* EN_LCD33V */
436                         MX6QDL_PAD_SD4_DAT5__GPIO2_IO13         0x4001b0b0 /* EN_AVDD */
437                         MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x40013058 /* ENVGH */
438                         MX6QDL_PAD_EIM_A18__GPIO2_IO20          0x40013058 /* ENVGL */
439                         MX6QDL_PAD_EIM_DA6__GPIO3_IO06          0x40013058 /* LCD_POWER */
440                         MX6QDL_PAD_KEY_COL4__GPIO4_IO14         0x40013058 /* EN_VCOM_LCD */
441                         MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x40013058 /* LCD_L_R */
442                         MX6QDL_PAD_EIM_DA2__GPIO3_IO02          0x40013058 /* LCD_U_D */
443                 >;
444         };
446         pinctrl_pwm3: pwm3grp {
447                 fsl,pins = <
448                         MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
449                 >;
450         };
452         pinctrl_uart3: uart3grp {
453                 fsl,pins = <
454                         MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
455                         MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
456                 >;
457         };
459         pinctrl_usbhost: usbhostgrp {
460                 fsl,pins = <
461                         MX6QDL_PAD_EIM_A23__GPIO6_IO06          0x4001b0b0
462                 >;
463         };
465         pinctrl_usdhc1: usdhc1grp {
466                 fsl,pins = <
467                         MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17069
468                         MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10079
469                         MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069
470                         MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069
471                         MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069
472                         MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069
473                 >;
474         };
476         pinctrl_usdhc3: usdhc3grp {
477                 fsl,pins = <
478                         MX6QDL_PAD_SD3_CMD__SD3_CMD     0x17059
479                         MX6QDL_PAD_SD3_CLK__SD3_CLK     0x10059
480                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0  0x17059
481                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1  0x17059
482                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2  0x17059
483                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3  0x17059
484                         MX6QDL_PAD_SD3_DAT4__SD3_DATA4  0x17059
485                         MX6QDL_PAD_SD3_DAT5__SD3_DATA5  0x17059
486                         MX6QDL_PAD_SD3_DAT6__SD3_DATA6  0x17059
487                         MX6QDL_PAD_SD3_DAT7__SD3_DATA7  0x17059
488                 >;
489         };
491         pinctrl_wlan: wlangrp {
492                 fsl,pins = <
493                         MX6QDL_PAD_RGMII_TD1__GPIO6_IO21        0x4001b0b0
494                 >;
495         };