Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
[linux/fpc-iii.git] / arch / arm / boot / dts / imx6q-prtwd2.dts
blob349959d38020066b3028bef12fe601c81041b3a2
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (c) 2018 Protonic Holland
4  */
6 /dts-v1/;
7 #include "imx6q.dtsi"
8 #include "imx6qdl-prti6q.dtsi"
9 #include <dt-bindings/leds/common.h>
11 / {
12         model = "Protonic WD2 board";
13         compatible = "prt,prtwd2", "fsl,imx6q";
15         memory@10000000 {
16                 device_type = "memory";
17                 reg = <0x10000000 0x20000000>;
18         };
20         memory@80000000 {
21                 device_type = "memory";
22                 reg = <0x80000000 0x20000000>;
23         };
25         usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
26                 compatible = "mmc-pwrseq-simple";
27                 pinctrl-names = "default";
28                 pinctrl-0 = <&pinctrl_wifi_npd>;
29                 reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
30         };
32         /* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
33         i2c {
34                 compatible = "i2c-gpio";
35                 pinctrl-names = "default";
36                 pinctrl-0 = <&pinctrl_i2c4>;
37                 sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
38                 scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
39                 i2c-gpio,delay-us = <20>;       /* ~10 kHz */
40                 i2c-gpio,scl-output-only;
41                 #address-cells = <1>;
42                 #size-cells = <0>;
43         };
46 &can1 {
47         pinctrl-names = "default";
48         pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
49         status = "okay";
52 &fec {
53         pinctrl-names = "default";
54         pinctrl-0 = <&pinctrl_enet>;
55         phy-mode = "rmii";
56         clocks = <&clks IMX6QDL_CLK_ENET>,
57                  <&clks IMX6QDL_CLK_ENET>;
58         clock-names = "ipg", "ahb";
59         status = "okay";
61         fixed-link {
62                 speed = <100>;
63                 pause;
64                 full-duplex;
65         };
68 &i2c3 {
69         adc@49 {
70                 compatible = "ti,ads1015";
71                 reg = <0x49>;
72                 #address-cells = <1>;
73                 #size-cells = <0>;
75                 /* V in */
76                 channel@4 {
77                         reg = <4>;
78                         ti,gain = <1>;
79                         ti,datarate = <3>;
80                 };
82                 /* I charge */
83                 channel@5 {
84                         reg = <5>;
85                         ti,gain = <1>;
86                         ti,datarate = <3>;
87                 };
89                 /* V bus  */
90                 channel@6 {
91                         reg = <6>;
92                         ti,gain = <1>;
93                         ti,datarate = <3>;
94                 };
96                 /* nc */
97                 channel@7 {
98                         reg = <7>;
99                         ti,gain = <1>;
100                         ti,datarate = <3>;
101                 };
102         };
105 &usdhc2 {
106         pinctrl-names = "default";
107         pinctrl-0 = <&pinctrl_usdhc2>;
108         no-1-8-v;
109         non-removable;
110         mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
111         #address-cells = <1>;
112         #size-cells = <0>;
113         status = "okay";
115         wifi@1 {
116                 compatible = "brcm,bcm4329-fmac";
117                 reg = <1>;
118         };
121 &iomuxc {
122         pinctrl-names = "default";
123         pinctrl-0 = <&pinctrl_usb_eth_chg>;
125         pinctrl_can1phy: can1phy {
126                 fsl,pins = <
127                         /* CAN1_SR */
128                         MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
129                 >;
130         };
132         pinctrl_enet: enetgrp {
133                 fsl,pins = <
134                         /* MX6QDL_ENET_PINGRP4 */
135                         MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
136                         MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
137                         MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x130b0
138                         MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
139                         MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
140                         MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
141                         MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
143                         MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x1b0b0
144                         /* Phy reset */
145                         MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22        0x1b0b0
146                         /* nINTRP */
147                         MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x1b0b0
149                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x10030
150                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x10030
151                 >;
152         };
154         pinctrl_i2c4: i2c4grp {
155                 fsl,pins = <
156                         MX6QDL_PAD_ENET_MDIO__GPIO1_IO22        0x1f8b0
157                         MX6QDL_PAD_ENET_MDC__GPIO1_IO31         0x1f8b0
158                 >;
159         };
161         pinctrl_usb_eth_chg: usbethchggrp {
162                 fsl,pins = <
163                         /* USB charging control */
164                         MX6QDL_PAD_NANDF_CS0__GPIO6_IO11        0x130b0
165                         MX6QDL_PAD_NANDF_CS1__GPIO6_IO14        0x130b0
166                         MX6QDL_PAD_NANDF_CS2__GPIO6_IO15        0x130b0
167                         MX6QDL_PAD_NANDF_CS3__GPIO6_IO16        0x130b0
168                         >;
169         };
171         pinctrl_usdhc2: usdhc2grp {
172                 fsl,pins = <
173                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x170b9
174                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x100b9
175                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x170b9
176                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x170b9
177                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x170b9
178                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x170b9
179                 >;
180         };
182         pinctrl_wifi_npd: wifinpd {
183                 fsl,pins = <
184                         /* WL_REG_ON */
185                         MX6QDL_PAD_NANDF_RB0__GPIO6_IO10        0x13069
186                 >;
187         };