arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0 or MIT)
   2 //
   3 // Copyright (C) 2018 emtrion GmbH
   4 //
   5
   6 / {
   7         aliases {
   8                 boardid = &boardid;
   9                 mmc0 = &usdhc3;
  10                 mmc1 = &usdhc2;
  11                 mmc2 = &usdhc1;
  12                 mmc3 = &usdhc4;
  13         };
  14
  15         reg_wall_5p0: reg-wall5p0 {
  16                 compatible = "regulator-fixed";
  17                 regulator-name = "Main-Supply";
  18                 regulator-min-microvolt = <5000000>;
  19                 regulator-max-microvolt = <5000000>;
  20                 regulator-always-on;
  21                 regulator-boot-on;
  22         };
  23
  24         reg_base3p3: reg-base3p3 {
  25                 compatible = "regulator-fixed";
  26                 vin-supply = <&reg_wall_5p0>;
  27                 regulator-name = "3V3-avari";
  28                 regulator-min-microvolt = <3300000>;
  29                 regulator-max-microvolt = <3300000>;
  30                 regulator-always-on;
  31                 regulator-boot-on;
  32         };
  33
  34         reg_base1p5: reg-base1p5 {
  35                 compatible = "regulator-fixed";
  36                 vin-supply = <&reg_base3p3>;
  37                 regulator-name = "1V5-avari";
  38                 regulator-min-microvolt = <1500000>;
  39                 regulator-max-microvolt = <1500000>;
  40                 regulator-always-on;
  41                 regulator-boot-on;
  42         };
  43
  44         reg_usb_otg: reg-otgvbus {
  45                 compatible = "regulator-fixed";
  46                 vin-supply = <&reg_wall_5p0>;
  47                 regulator-name = "OTG_VBUS";
  48                 regulator-min-microvolt = <5000000>;
  49                 regulator-max-microvolt = <5000000>;
  50                 gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
  51                 regulator-always-on;
  52         };
  53
  54         clk_codec: clock-codec {
  55                 compatible = "fixed-clock";
  56                 #clock-cells = <0>;
  57                 clock-frequency  = <12000000>;
  58         };
  59
  60         sound {
  61                 compatible = "fsl,imx-audio-sgtl5000";
  62                 model = "emCON-avari-sgtl5000";
  63                 ssi-controller = <&ssi2>;
  64                 audio-codec = <&sgtl5000>;
  65                 audio-routing =
  66                         "Headphone Jack", "HP_OUT";
  67                 mux-int-port = <2>;
  68                 mux-ext-port = <3>;
  69         };
  70 };
  71
  72 &audmux {
  73         pinctrl-names = "default";
  74         pinctrl-0 = <&pinctrl_audmux>;
  75         status = "okay";
  76 };
  77
  78 &can1 {
  79         status = "okay";
  80 };
  81
  82 &can2 {
  83         status = "okay";
  84 };
  85
  86 &ecspi2 {
  87         status = "okay";
  88 };
  89
  90 &hdmi {
  91         ddc-i2c-bus = <&i2c2>;
  92         status = "okay";
  93 };
  94
  95 &i2c2 {
  96         status = "okay";
  97 };
  98
  99 &i2c3 {
 100         clock-frequency = <100000>;
 101         pinctrl-names = "default";
 102         pinctrl-0 = <&pinctrl_i2c3>;
 103         status = "okay";
 104
 105         sgtl5000: audio-codec@a {
 106                 compatible = "fsl,sgtl5000";
 107                 reg = <0x0a>;
 108                 #sound-dai-cells = <0>;
 109                 clocks = <&clk_codec>;
 110                 VDDA-supply = <&reg_base3p3>;
 111                 VDDIO-supply = <&reg_base3p3>;
 112         };
 113
 114         captouch: touchscreen@38 {
 115                 compatible = "edt,edt-ft5406";
 116                 reg = <0x38>;
 117                 pinctrl-names = "default";
 118                 pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>;
 119                 interrupt-parent = <&gpio6>;
 120                 interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 121                 wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 122                 wakeup-source;
 123         };
 124
 125         boardid: gpio@3a {
 126                 compatible = "nxp,pca8574";
 127                 reg = <0x3a>;
 128                 gpio-controller;
 129                 #gpio-cells = <1>;
 130         };
 131 };
 132
 133 &pcie {
 134         status = "okay";
 135 };
 136
 137 &rgb_encoder {
 138         status = "okay";
 139 };
 140
 141 &rgb_panel {
 142         compatible = "edt,etm0700g0bdh6";
 143         status = "okay";
 144 };
 145
 146 &ssi2 {
 147         status = "okay";
 148 };
 149
 150 &uart2 {
 151         status = "okay";
 152         uart-has-rtscts;
 153 };
 154
 155 &uart3 {
 156         status = "okay";
 157 };
 158
 159 &uart4 {
 160         status = "okay";
 161 };
 162
 163 &uart5 {
 164         status = "okay";
 165 };
 166
 167 &usbh1 {
 168         status = "okay";
 169 };
 170
 171 &usbotg {
 172         status = "okay";
 173 };
 174
 175 &usdhc1 {
 176         status = "okay";
 177 };