arch/arm/boot/dts/imx6qdl-prti6q.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * Copyright (c) 2014 Protonic Holland
   4  */
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         chosen {
  11                 stdout-path = &uart4;
  12         };
  13
  14         reg_3v3: regulator-3v3 {
  15                 compatible = "regulator-fixed";
  16                 regulator-name = "3v3";
  17                 regulator-min-microvolt = <3300000>;
  18                 regulator-max-microvolt = <3300000>;
  19         };
  20
  21         reg_usb_h1_vbus: regulator-h1-vbus {
  22                 compatible = "regulator-fixed";
  23                 regulator-name = "h1-vbus";
  24                 regulator-min-microvolt = <5000000>;
  25                 regulator-max-microvolt = <5000000>;
  26         };
  27
  28         reg_usb_otg_vbus: regulator-otg-vbus {
  29                 compatible = "regulator-fixed";
  30                 regulator-name = "otg-vbus";
  31                 regulator-min-microvolt = <5000000>;
  32                 regulator-max-microvolt = <5000000>;
  33                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
  34                 enable-active-high;
  35         };
  36 };
  37
  38 &can1 {
  39         pinctrl-names = "default";
  40         status = "okay";
  41 };
  42
  43 &i2c1 {
  44         clock-frequency = <100000>;
  45         pinctrl-names = "default";
  46         pinctrl-0 = <&pinctrl_i2c1>;
  47         status = "okay";
  48 };
  49
  50 &i2c3 {
  51         clock-frequency = <100000>;
  52         pinctrl-names = "default";
  53         pinctrl-0 = <&pinctrl_i2c3>;
  54         status = "okay";
  55
  56         temperature-sensor@70 {
  57                 compatible = "ti,tmp103";
  58                 reg = <0x70>;
  59         };
  60 };
  61
  62 &uart4 {
  63         pinctrl-names = "default";
  64         pinctrl-0 = <&pinctrl_uart4>;
  65         status = "okay";
  66 };
  67
  68 &usbh1 {
  69         vbus-supply = <&reg_usb_h1_vbus>;
  70         phy_type = "utmi";
  71         dr_mode = "host";
  72         status = "okay";
  73 };
  74
  75 &usbotg {
  76         vbus-supply = <&reg_usb_otg_vbus>;
  77         pinctrl-names = "default";
  78         pinctrl-0 = <&pinctrl_usbotg>;
  79         phy_type = "utmi";
  80         dr_mode = "host";
  81         disable-over-current;
  82         status = "okay";
  83 };
  84
  85 &usdhc1 {
  86         pinctrl-names = "default";
  87         pinctrl-0 = <&pinctrl_usdhc1>;
  88         cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
  89         status = "okay";
  90 };
  91
  92 &usdhc3 {
  93         pinctrl-names = "default";
  94         pinctrl-0 = <&pinctrl_usdhc3>;
  95         bus-width = <8>;
  96         non-removable;
  97         status = "okay";
  98 };
  99
 100 &iomuxc {
 101         pinctrl_can1: can1grp {
 102                 fsl,pins = <
 103                         MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b008
 104                         MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b008
 105                 >;
 106         };
 107
 108         pinctrl_i2c1: i2c1grp {
 109                 fsl,pins = <
 110                         MX6QDL_PAD_CSI0_DAT8__I2C1_SDA          0x4001f8b1
 111                         MX6QDL_PAD_CSI0_DAT9__I2C1_SCL          0x4001f8b1
 112                 >;
 113         };
 114
 115         pinctrl_i2c3: i2c3grp {
 116                 fsl,pins = <
 117                         MX6QDL_PAD_GPIO_5__I2C3_SCL             0x4001b8b1
 118                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 119                 >;
 120         };
 121
 122         pinctrl_uart4: uart4grp {
 123                 fsl,pins = <
 124                         MX6QDL_PAD_KEY_COL0__UART4_TX_DATA      0x1b0b1
 125                         MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA      0x1b0b1
 126                 >;
 127         };
 128
 129         pinctrl_usdhc1: usdhc1grp {
 130                 fsl,pins = <
 131                         MX6QDL_PAD_SD1_CMD__SD1_CMD             0x170f9
 132                         MX6QDL_PAD_SD1_CLK__SD1_CLK             0x100f9
 133                         MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x170f9
 134                         MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x170f9
 135                         MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x170f9
 136                         MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x170f9
 137                         MX6QDL_PAD_GPIO_1__GPIO1_IO01           0x1b0b0
 138                 >;
 139         };
 140
 141         pinctrl_usdhc3: usdhc3grp {
 142                 fsl,pins = <
 143                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17099
 144                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10099
 145                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17099
 146                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17099
 147                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17099
 148                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17099
 149                         MX6QDL_PAD_SD3_DAT4__SD3_DATA4          0x17099
 150                         MX6QDL_PAD_SD3_DAT5__SD3_DATA5          0x17099
 151                         MX6QDL_PAD_SD3_DAT6__SD3_DATA6          0x17099
 152                         MX6QDL_PAD_SD3_DAT7__SD3_DATA7          0x17099
 153                         MX6QDL_PAD_SD3_RST__SD3_RESET           0x1b0b1
 154                 >;
 155         };
 156
 157         pinctrl_usbotg: usbotggrp {
 158                 fsl,pins = <
 159                         MX6QDL_PAD_EIM_D21__USB_OTG_OC  0x1b0b0
 160                         MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
 161                 >;
 162         };
 163 };