Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
[linux/fpc-iii.git] / arch / arm / boot / dts / imx6sl-warp.dts
blob9d7c8884892a9b39d4db7fb1e900e16efb6fa32e
1 /*
2  * Copyright 2014, 2015 O.S. Systems Software LTDA.
3  *
4  * This file is dual-licensed: you can use it either under the terms
5  * of the GPL or the X11 license, at your option. Note that this dual
6  * licensing only applies to this file, and not this project as a
7  * whole.
8  *
9  *  a) This file is free software; you can redistribute it and/or
10  *     modify it under the terms of the GNU General Public License as
11  *     published by the Free Software Foundation; either version 2 of
12  *     the License, or (at your option) any later version.
13  *
14  *     This file is distributed in the hope that it will be useful,
15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *     GNU General Public License for more details.
18  *
19  *     You should have received a copy of the GNU General Public
20  *     License along with this file; if not, write to the Free
21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22  *     MA 02110-1301 USA
23  *
24  * Or, alternatively,
25  *
26  *  b) Permission is hereby granted, free of charge, to any person
27  *     obtaining a copy of this software and associated documentation
28  *     files (the "Software"), to deal in the Software without
29  *     restriction, including without limitation the rights to use,
30  *     copy, modify, merge, publish, distribute, sublicense, and/or
31  *     sell copies of the Software, and to permit persons to whom the
32  *     Software is furnished to do so, subject to the following
33  *     conditions:
34  *
35  *     The above copyright notice and this permission notice shall be
36  *     included in all copies or substantial portions of the Software.
37  *
38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45  *     OTHER DEALINGS IN THE SOFTWARE.
46  */
48 /dts-v1/;
50 #include <dt-bindings/gpio/gpio.h>
51 #include "imx6sl.dtsi"
53 / {
54         model = "Revotics WaRP Board";
55         compatible = "revotics,imx6sl-warp", "fsl,imx6sl";
57         memory@80000000 {
58                 device_type = "memory";
59                 reg = <0x80000000 0x20000000>;
60         };
62         usdhc3_pwrseq: usdhc3_pwrseq {
63                 compatible = "mmc-pwrseq-simple";
64                 reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>,       /* WL_REG_ON */
65                               <&gpio4 7 GPIO_ACTIVE_LOW>,       /* WL_HOSTWAKE */
66                               <&gpio3 25 GPIO_ACTIVE_LOW>,      /* BT_REG_ON */
67                               <&gpio3 27 GPIO_ACTIVE_LOW>,      /* BT_HOSTWAKE */
68                               <&gpio4 4 GPIO_ACTIVE_LOW>,       /* BT_WAKE */
69                               <&gpio4 6 GPIO_ACTIVE_LOW>;       /* BT_RST_N */
70         };
73 &uart1 {
74         pinctrl-names = "default";
75         pinctrl-0 = <&pinctrl_uart1>;
76         status = "okay";
79 &uart3 {
80         pinctrl-names = "default";
81         pinctrl-0 = <&pinctrl_uart3>;
82         status = "okay";
85 &uart5 {
86         pinctrl-names = "default";
87         pinctrl-0 = <&pinctrl_uart5>;
88         uart-has-rtscts;
89         status = "okay";
92 &usbotg1 {
93         dr_mode = "peripheral";
94         disable-over-current;
95         status = "okay";
98 &usbotg2 {
99         dr_mode = "host";
100         disable-over-current;
101         status = "okay";
104 &usdhc2 {
105         pinctrl-names = "default", "state_100mhz", "state_200mhz";
106         pinctrl-0 = <&pinctrl_usdhc2>;
107         pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
108         pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
109         bus-width = <8>;
110         non-removable;
111         status = "okay";
114 &usdhc3 {
115         pinctrl-names = "default", "state_100mhz", "state_200mhz";
116         pinctrl-0 = <&pinctrl_usdhc3>;
117         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
118         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
119         bus-width = <4>;
120         non-removable;
121         keep-power-in-suspend;
122         wakeup-source;
123         mmc-pwrseq = <&usdhc3_pwrseq>;
124         status = "okay";
127 &iomuxc {
128         imx6sl-warp {
129                 pinctrl_uart1: uart1grp {
130                         fsl,pins = <
131                                 MX6SL_PAD_UART1_RXD__UART1_RX_DATA      0x41b0b1
132                                 MX6SL_PAD_UART1_TXD__UART1_TX_DATA      0x41b0b1
133                         >;
134                 };
137                 pinctrl_uart3: uart3grp {
138                         fsl,pins = <
139                                 MX6SL_PAD_AUD_RXC__UART3_RX_DATA        0x41b0b1
140                                 MX6SL_PAD_AUD_RXC__UART3_TX_DATA        0x41b0b1
141                         >;
142                 };
144                 pinctrl_uart5: uart5grp {
145                         fsl,pins = <
146                                 MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA    0x41b0b1
147                                 MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA    0x41b0b1
148                                 MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B      0x4130b1
149                                 MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B       0x4130b1
150                         >;
151                 };
153                 pinctrl_usdhc2: usdhc2grp {
154                         fsl,pins = <
155                                 MX6SL_PAD_SD2_CMD__SD2_CMD              0x417059
156                                 MX6SL_PAD_SD2_CLK__SD2_CLK              0x410059
157                                 MX6SL_PAD_SD2_DAT0__SD2_DATA0           0x417059
158                                 MX6SL_PAD_SD2_DAT1__SD2_DATA1           0x417059
159                                 MX6SL_PAD_SD2_DAT2__SD2_DATA2           0x417059
160                                 MX6SL_PAD_SD2_DAT3__SD2_DATA3           0x417059
161                                 MX6SL_PAD_SD2_DAT4__SD2_DATA4           0x417059
162                                 MX6SL_PAD_SD2_DAT5__SD2_DATA5           0x417059
163                                 MX6SL_PAD_SD2_DAT6__SD2_DATA6           0x417059
164                                 MX6SL_PAD_SD2_DAT7__SD2_DATA7           0x417059
165                                 MX6SL_PAD_SD2_RST__SD2_RESET            0x417059
166                         >;
167                 };
169                 pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
170                         fsl,pins = <
171                                 MX6SL_PAD_SD2_CMD__SD2_CMD              0x4170b9
172                                 MX6SL_PAD_SD2_CLK__SD2_CLK              0x4100b9
173                                 MX6SL_PAD_SD2_DAT0__SD2_DATA0           0x4170b9
174                                 MX6SL_PAD_SD2_DAT1__SD2_DATA1           0x4170b9
175                                 MX6SL_PAD_SD2_DAT2__SD2_DATA2           0x4170b9
176                                 MX6SL_PAD_SD2_DAT3__SD2_DATA3           0x4170b9
177                                 MX6SL_PAD_SD2_DAT4__SD2_DATA4           0x4170b9
178                                 MX6SL_PAD_SD2_DAT5__SD2_DATA5           0x4170b9
179                                 MX6SL_PAD_SD2_DAT6__SD2_DATA6           0x4170b9
180                                 MX6SL_PAD_SD2_DAT7__SD2_DATA7           0x4170b9
181                                 MX6SL_PAD_SD2_RST__SD2_RESET            0x4170b9
182                         >;
183                 };
185                 pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
186                         fsl,pins = <
187                                 MX6SL_PAD_SD2_CMD__SD2_CMD              0x4170f9
188                                 MX6SL_PAD_SD2_CLK__SD2_CLK              0x4100f9
189                                 MX6SL_PAD_SD2_DAT0__SD2_DATA0           0x4170f9
190                                 MX6SL_PAD_SD2_DAT1__SD2_DATA1           0x4170f9
191                                 MX6SL_PAD_SD2_DAT2__SD2_DATA2           0x4170f9
192                                 MX6SL_PAD_SD2_DAT3__SD2_DATA3           0x4170f9
193                                 MX6SL_PAD_SD2_DAT4__SD2_DATA4           0x4170f9
194                                 MX6SL_PAD_SD2_DAT5__SD2_DATA5           0x4170f9
195                                 MX6SL_PAD_SD2_DAT6__SD2_DATA6           0x4170f9
196                                 MX6SL_PAD_SD2_DAT7__SD2_DATA7           0x4170f9
197                                 MX6SL_PAD_SD2_RST__SD2_RESET            0x4170f9
198                         >;
199                 };
201                 pinctrl_usdhc3: usdhc3grp {
202                         fsl,pins = <
203                                 MX6SL_PAD_SD3_CMD__SD3_CMD              0x417059
204                                 MX6SL_PAD_SD3_CLK__SD3_CLK              0x410059
205                                 MX6SL_PAD_SD3_DAT0__SD3_DATA0           0x417059
206                                 MX6SL_PAD_SD3_DAT1__SD3_DATA1           0x417059
207                                 MX6SL_PAD_SD3_DAT2__SD3_DATA2           0x417059
208                                 MX6SL_PAD_SD3_DAT3__SD3_DATA3           0x417059
209                         >;
210                 };
212                 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
213                         fsl,pins = <
214                                 MX6SL_PAD_SD3_CMD__SD3_CMD              0x4170b9
215                                 MX6SL_PAD_SD3_CLK__SD3_CLK              0x4100b9
216                                 MX6SL_PAD_SD3_DAT0__SD3_DATA0           0x4170b9
217                                 MX6SL_PAD_SD3_DAT1__SD3_DATA1           0x4170b9
218                                 MX6SL_PAD_SD3_DAT2__SD3_DATA2           0x4170b9
219                                 MX6SL_PAD_SD3_DAT3__SD3_DATA3           0x4170b9
220                         >;
221                 };
223                 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
224                         fsl,pins = <
225                                 MX6SL_PAD_SD3_CMD__SD3_CMD              0x4170f9
226                                 MX6SL_PAD_SD3_CLK__SD3_CLK              0x4100f9
227                                 MX6SL_PAD_SD3_DAT0__SD3_DATA0           0x4170f9
228                                 MX6SL_PAD_SD3_DAT1__SD3_DATA1           0x4170f9
229                                 MX6SL_PAD_SD3_DAT2__SD3_DATA2           0x4170f9
230                                 MX6SL_PAD_SD3_DAT3__SD3_DATA3           0x4170f9
231                         >;
232                 };
233         };