Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
[linux/fpc-iii.git] / arch / arm / boot / dts / omap3-ha-lcd.dts
blob643283f0c3dbb2a0266f80a3927243c8ee05d249
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
4  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
5  */
7 #include "omap3-ha-common.dtsi"
9 / {
10         model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM";
11         compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
14 &omap3_pmx_core {
15         pinctrl-names = "default";
16         pinctrl-0 = <
17                 &hsusbb2_pins
18                 &powerdown_input_pins
19                 &fpga_boot0_pins
20                 &fpga_boot1_pins
21                 &led_blue_pins
22                 &led_green_pins
23                 &led_red_pins
24                 &touchscreen_wake_pins
25         >;
27         touchscreen_irq_pins: pinmux_touchscreen_irq_pins {
28                 pinctrl-single,pins = <
29                         OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio_136, Touchscreen IRQ */
30                 >;
31         };
33         touchscreen_wake_pins: pinmux_touchscreen_wake_pins {
34                 pinctrl-single,pins = <
35                         OMAP3_CORE1_IOPAD(0x212c, PIN_OUTPUT_PULLUP | MUX_MODE4)        /* gpio_110, Touchscreen Wake */
36                 >;
37         };
39         dss_dpi_pins: pinmux_dss_dpi_pins {
40                 pinctrl-single,pins = <
41                         OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)       /* dss_pclk.dss_pclk */
42                         OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)       /* dss_hsync.dss_hsync */
43                         OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)       /* dss_vsync.dss_vsync */
44                         OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)       /* dss_acbias.dss_acbias */
45                         OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)       /* dss_data0.dss_data0 */
46                         OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)       /* dss_data1.dss_data1 */
47                         OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)       /* dss_data2.dss_data2 */
48                         OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)       /* dss_data3.dss_data3 */
49                         OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)       /* dss_data4.dss_data4 */
50                         OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)       /* dss_data5.dss_data5 */
51                         OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)       /* dss_data6.dss_data6 */
52                         OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)       /* dss_data7.dss_data7 */
53                         OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)       /* dss_data8.dss_data8 */
54                         OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)       /* dss_data9.dss_data9 */
55                         OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)       /* dss_data10.dss_data10 */
56                         OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)       /* dss_data11.dss_data11 */
57                         OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)       /* dss_data12.dss_data12 */
58                         OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)       /* dss_data13.dss_data13 */
59                         OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)       /* dss_data14.dss_data14 */
60                         OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)       /* dss_data15.dss_data15 */
61                         OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)       /* dss_data16.dss_data16 */
62                         OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)       /* dss_data17.dss_data17 */
63                         OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)       /* dss_data18.dss_data18 */
64                         OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)       /* dss_data19.dss_data19 */
65                         OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)       /* dss_data20.dss_data20 */
66                         OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)       /* dss_data21.dss_data21 */
67                         OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)       /* dss_data22.dss_data22 */
68                         OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)       /* dss_data23.dss_data23 */
69                 >;
70         };
72         lte430_pins: pinmux_lte430_pins {
73                 pinctrl-single,pins = <
74                         OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)       /* sdmmc2_dat6.gpio_138 */
75                 >;
76         };
78         backlight_pins: pinmux_backlight_pins {
79                 pinctrl-single,pins = <
80                         OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)       /* sdmmc2_dat7.gpio_139 */
81                 >;
82         };
85 /* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
86 &i2c2 {
87         status = "disabled";
90 &i2c3 {
91         clock-frequency = <100000>;
93         pinctrl-names = "default";
94         pinctrl-0 = <&i2c3_pins>;
97 /* Needed to power the DPI pins */
98 &vpll2 {
99         regulator-always-on;
102 &dss {
103         status = "okay";
105         pinctrl-names = "default";
106         pinctrl-0 = <&dss_dpi_pins>;
108         port {
109                 dpi_out: endpoint {
110                         remote-endpoint = <&lcd_in>;
111                         data-lines = <24>;
112                 };
113         };
116 / {
117         aliases {
118                 display0 = &lcd0;
119         };
121         lcd0: display {
122                 compatible = "panel-dpi";
123                 label = "lcd";
125                 pinctrl-names = "default";
126                 pinctrl-0 = <&lte430_pins>;
127                 enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;     /* gpio_138 */
129                 port {
130                         lcd_in: endpoint {
131                                 remote-endpoint = <&dpi_out>;
132                         };
133                 };
135                 panel-timing {
136                         clock-frequency = <31250000>;
137                         hactive = <800>;
138                         vactive = <480>;
139                         hfront-porch = <40>;
140                         hback-porch = <86>;
141                         hsync-len = <1>;
142                         vback-porch = <30>;
143                         vfront-porch = <13>;
144                         vsync-len = <3>;
146                         hsync-active = <0>;
147                         vsync-active = <0>;
148                         de-active = <1>;
149                         pixelclk-active = <1>;
150                 };
151         };
153         backlight {
154                 compatible = "gpio-backlight";
156                 pinctrl-names = "default";
157                 pinctrl-0 = <&backlight_pins>;
158                 gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;           /* gpio_139 */
160                 default-on;
161         };