Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
[linux/fpc-iii.git] / arch / arm / boot / dts / r8a7745-iwg22m.dtsi
blob41f111b99a759eab29f8d83573dc999c3b69badd
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Device Tree Source for the iWave-RZG1E-G22M SODIMM SOM
4  *
5  * Copyright (C) 2017 Renesas Electronics Corp.
6  */
8 #include "r8a7745.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
11 / {
12         compatible = "iwave,g22m", "renesas,r8a7745";
14         memory@40000000 {
15                 device_type = "memory";
16                 reg = <0 0x40000000 0 0x20000000>;
17         };
19         reg_3p3v: 3p3v {
20                 compatible = "regulator-fixed";
21                 regulator-name = "3P3V";
22                 regulator-min-microvolt = <3300000>;
23                 regulator-max-microvolt = <3300000>;
24                 regulator-always-on;
25                 regulator-boot-on;
26         };
29 &cmt0 {
30         status = "okay";
33 &extal_clk {
34         clock-frequency = <20000000>;
37 &pfc {
38         mmcif0_pins: mmc {
39                 groups = "mmc_data8", "mmc_ctrl";
40                 function = "mmc";
41         };
43         qspi_pins: qspi {
44                 groups = "qspi_ctrl", "qspi_data2";
45                 function = "qspi";
46         };
48         sdhi1_pins: sd1 {
49                 groups = "sdhi1_data4", "sdhi1_ctrl";
50                 function = "sdhi1";
51                 power-source = <3300>;
52         };
54         i2c3_pins: i2c3 {
55                 groups = "i2c3_b";
56                 function = "i2c3";
57         };
60 &mmcif0 {
61         pinctrl-0 = <&mmcif0_pins>;
62         pinctrl-names = "default";
64         vmmc-supply = <&reg_3p3v>;
65         bus-width = <8>;
66         non-removable;
67         status = "okay";
70 &qspi {
71         pinctrl-0 = <&qspi_pins>;
72         pinctrl-names = "default";
74         status = "okay";
76         /* WARNING - This device contains the bootloader. Handle with care. */
77         flash: flash@0 {
78                 #address-cells = <1>;
79                 #size-cells = <1>;
80                 compatible = "sst,sst25vf016b", "jedec,spi-nor";
81                 reg = <0>;
82                 spi-max-frequency = <50000000>;
83                 spi-tx-bus-width = <1>;
84                 spi-rx-bus-width = <1>;
85                 m25p,fast-read;
86                 spi-cpol;
87                 spi-cpha;
88         };
91 &rwdt {
92         timeout-sec = <60>;
93         status = "okay";
96 &sdhi1 {
97         pinctrl-0 = <&sdhi1_pins>;
98         pinctrl-names = "default";
100         vmmc-supply = <&reg_3p3v>;
101         vqmmc-supply = <&reg_3p3v>;
102         cd-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
103         status = "okay";
106 &i2c3 {
107         pinctrl-0 = <&i2c3_pins>;
108         pinctrl-names = "default";
110         status = "okay";
111         clock-frequency = <400000>;
113         rtc@68 {
114                 compatible = "ti,bq32000";
115                 reg = <0x68>;
116         };