arch/arm/boot/dts/s5pv210-aries.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Samsung's S5PV210 based Galaxy Aries board device tree source
   4  */
   5
   6 /dts-v1/;
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/interrupt-controller/irq.h>
   9 #include "s5pv210.dtsi"
  10
  11 / {
  12         compatible = "samsung,aries", "samsung,s5pv210";
  13
  14         aliases: aliases {
  15                 i2c4 = &i2c_sound;
  16                 i2c5 = &i2c_accel;
  17                 i2c6 = &i2c_pmic;
  18                 i2c7 = &i2c_musb;
  19                 i2c9 = &i2c_fuel;
  20                 i2c10 = &i2c_touchkey;
  21                 i2c11 = &i2c_prox;
  22                 i2c12 = &i2c_magnetometer;
  23         };
  24
  25         memory@30000000 {
  26                 device_type = "memory";
  27                 reg = <0x30000000 0x05000000
  28                         0x40000000 0x10000000
  29                         0x50000000 0x08000000>;
  30         };
  31
  32         reserved-memory {
  33                 #address-cells = <1>;
  34                 #size-cells = <1>;
  35                 ranges;
  36
  37                 mfc_left: region@43000000 {
  38                         compatible = "shared-dma-pool";
  39                         no-map;
  40                         reg = <0x43000000 0x2000000>;
  41                 };
  42
  43                 mfc_right: region@51000000 {
  44                         compatible = "shared-dma-pool";
  45                         no-map;
  46                         reg = <0x51000000 0x2000000>;
  47                 };
  48         };
  49
  50         pmic_ap_clk: clock-0 {
  51                 /* Workaround for missing clock on PMIC */
  52                 compatible = "fixed-clock";
  53                 #clock-cells = <0>;
  54                 clock-frequency = <32768>;
  55         };
  56
  57         bt_codec: bt-sco {
  58                 compatible = "linux,bt-sco";
  59                 #sound-dai-cells = <0>;
  60         };
  61
  62         vibrator_pwr: regulator-fixed-0 {
  63                 compatible = "regulator-fixed";
  64                 regulator-name = "vibrator-en";
  65                 enable-active-high;
  66                 gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
  67
  68                 pinctrl-names = "default";
  69                 pinctrl-0 = <&vibrator_ena>;
  70         };
  71
  72         touchkey_vdd: regulator-fixed-1 {
  73                 compatible = "regulator-fixed";
  74                 regulator-name = "VTOUCH_3.3V";
  75                 regulator-min-microvolt = <3300000>;
  76                 regulator-max-microvolt = <3300000>;
  77                 enable-active-high;
  78                 gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>;
  79
  80                 pinctrl-names = "default";
  81                 pinctrl-0 = <&touchkey_vdd_ena>;
  82         };
  83
  84         gp2a_vled: regulator-fixed-2 {
  85                 compatible = "regulator-fixed";
  86                 regulator-name = "VLED";
  87                 enable-active-high;
  88                 gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>;
  89                 regulator-min-microvolt = <2800000>;
  90                 regulator-max-microvolt = <2800000>;
  91
  92                 pinctrl-names = "default";
  93                 pinctrl-0 = <&gp2a_power>;
  94         };
  95
  96         wifi_pwrseq: wifi-pwrseq {
  97                 compatible = "mmc-pwrseq-simple";
  98                 reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
  99                 pinctrl-names = "default";
 100                 pinctrl-0 = <&wlan_gpio_rst>;
 101                 post-power-on-delay-ms = <500>;
 102                 power-off-delay-us = <500>;
 103         };
 104
 105         i2c_sound: i2c-gpio-0 {
 106                 compatible = "i2c-gpio";
 107                 sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 108                 scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 109                 i2c-gpio,delay-us = <2>;
 110                 #address-cells = <1>;
 111                 #size-cells = <0>;
 112
 113                 pinctrl-names = "default";
 114                 pinctrl-0 = <&sound_i2c_pins>;
 115
 116                 wm8994: audio-codec@1a {
 117                         compatible = "wlf,wm8994";
 118                         reg = <0x1a>;
 119
 120                         #sound-dai-cells = <0>;
 121
 122                         gpio-controller;
 123                         #gpio-cells = <2>;
 124
 125                         clocks = <&clocks MOUT_CLKOUT>;
 126                         clock-names = "MCLK1";
 127
 128                         AVDD2-supply = <&buck3_reg>;
 129                         DBVDD-supply = <&buck3_reg>;
 130                         CPVDD-supply = <&buck3_reg>;
 131                         SPKVDD1-supply = <&buck3_reg>;
 132                         SPKVDD2-supply = <&buck3_reg>;
 133
 134                         wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100
 135                                         0xa101 0x0100 0x8100 0x0100 0x0100
 136                                         0x0100>;
 137
 138                         wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
 139                         wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
 140
 141                         wlf,lineout1-se;
 142                         wlf,lineout2-se;
 143
 144                         assigned-clocks = <&clocks MOUT_CLKOUT>;
 145                         assigned-clock-rates = <0>;
 146                         assigned-clock-parents = <&xusbxti>;
 147
 148                         pinctrl-names = "default";
 149                         pinctrl-0 = <&codec_ldo>;
 150                 };
 151         };
 152
 153         i2c_accel: i2c-gpio-1 {
 154                 compatible = "i2c-gpio";
 155                 sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 156                 scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 157                 i2c-gpio,delay-us = <2>;
 158                 #address-cells = <1>;
 159                 #size-cells = <0>;
 160
 161                 pinctrl-names = "default";
 162                 pinctrl-0 = <&accel_i2c_pins>;
 163
 164                 accelerometer@38 {
 165                         compatible = "bosch,bma023";
 166                         reg = <0x38>;
 167
 168                         vdd-supply = <&ldo9_reg>;
 169                         vddio-supply = <&ldo9_reg>;
 170                 };
 171         };
 172
 173         i2c_pmic: i2c-gpio-2 {
 174                 compatible = "i2c-gpio";
 175                 sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 176                 scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 177                 i2c-gpio,delay-us = <2>;
 178                 #address-cells = <1>;
 179                 #size-cells = <0>;
 180
 181                 pinctrl-names = "default";
 182                 pinctrl-0 = <&pmic_i2c_pins>;
 183
 184                 pmic@66 {
 185                         compatible = "maxim,max8998";
 186                         reg = <0x66>;
 187                         interrupt-parent = <&gph0>;
 188                         interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 189
 190                         max8998,pmic-buck1-default-dvs-idx = <1>;
 191                         max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
 192                                                         <&gph0 4 GPIO_ACTIVE_HIGH>;
 193                         max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>,
 194                                                         <1050000>, <950000>;
 195
 196                         max8998,pmic-buck2-default-dvs-idx = <0>;
 197                         max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
 198                         max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;
 199
 200                         pinctrl-names = "default";
 201                         pinctrl-0 = <&pmic_dvs_pins &pmic_irq>;
 202
 203                         regulators {
 204                                 ldo2_reg: LDO2 {
 205                                         regulator-name = "VALIVE_1.2V";
 206                                         regulator-min-microvolt = <1200000>;
 207                                         regulator-max-microvolt = <1200000>;
 208                                         regulator-always-on;
 209
 210                                         regulator-state-mem {
 211                                                 regulator-on-in-suspend;
 212                                         };
 213                                 };
 214
 215                                 ldo3_reg: LDO3 {
 216                                         regulator-name = "VUSB_1.1V";
 217                                         regulator-min-microvolt = <1100000>;
 218                                         regulator-max-microvolt = <1100000>;
 219
 220                                         regulator-state-mem {
 221                                                 regulator-off-in-suspend;
 222                                         };
 223                                 };
 224
 225                                 ldo4_reg: LDO4 {
 226                                         regulator-name = "VADC_3.3V";
 227                                         regulator-min-microvolt = <3300000>;
 228                                         regulator-max-microvolt = <3300000>;
 229
 230                                         regulator-state-mem {
 231                                                 regulator-off-in-suspend;
 232                                         };
 233                                 };
 234
 235                                 ldo5_reg: LDO5 {
 236                                         regulator-name = "VTF_2.8V";
 237                                         regulator-min-microvolt = <2800000>;
 238                                         regulator-max-microvolt = <2800000>;
 239
 240                                         regulator-state-mem {
 241                                                 regulator-off-in-suspend;
 242                                         };
 243                                 };
 244
 245                                 ldo6_reg: LDO6 {
 246                                         regulator-name = "LDO6";
 247                                         regulator-min-microvolt = <1600000>;
 248                                         regulator-max-microvolt = <3600000>;
 249                                 };
 250
 251                                 ldo7_reg: LDO7 {
 252                                         regulator-name = "VLCD_1.8V";
 253                                         regulator-min-microvolt = <1800000>;
 254                                         regulator-max-microvolt = <1800000>;
 255
 256                                         regulator-state-mem {
 257                                                 regulator-off-in-suspend;
 258                                         };
 259                                 };
 260
 261                                 ldo8_reg: LDO8 {
 262                                         regulator-name = "VUSB_3.3V";
 263                                         regulator-min-microvolt = <3300000>;
 264                                         regulator-max-microvolt = <3300000>;
 265
 266                                         regulator-state-mem {
 267                                                 regulator-off-in-suspend;
 268                                         };
 269                                 };
 270
 271                                 ldo9_reg: LDO9 {
 272                                         regulator-name = "VCC_2.8V_PDA";
 273                                         regulator-min-microvolt = <2800000>;
 274                                         regulator-max-microvolt = <2800000>;
 275                                         regulator-always-on;
 276                                 };
 277
 278                                 ldo10_reg: LDO10 {
 279                                         regulator-name = "VPLL_1.2V";
 280                                         regulator-min-microvolt = <1200000>;
 281                                         regulator-max-microvolt = <1200000>;
 282                                         regulator-always-on;
 283
 284                                         regulator-state-mem {
 285                                                 regulator-on-in-suspend;
 286                                         };
 287                                 };
 288
 289                                 ldo11_reg: LDO11 {
 290                                         regulator-name = "CAM_AF_3.0V";
 291                                         regulator-min-microvolt = <3000000>;
 292                                         regulator-max-microvolt = <3000000>;
 293
 294                                         regulator-state-mem {
 295                                                 regulator-off-in-suspend;
 296                                         };
 297                                 };
 298
 299                                 ldo12_reg: LDO12 {
 300                                         regulator-name = "CAM_SENSOR_CORE_1.2V";
 301                                         regulator-min-microvolt = <1200000>;
 302                                         regulator-max-microvolt = <1200000>;
 303
 304                                         regulator-state-mem {
 305                                                 regulator-off-in-suspend;
 306                                         };
 307                                 };
 308
 309                                 ldo13_reg: LDO13 {
 310                                         regulator-name = "VGA_VDDIO_2.8V";
 311                                         regulator-min-microvolt = <2800000>;
 312                                         regulator-max-microvolt = <2800000>;
 313
 314                                         regulator-state-mem {
 315                                                 regulator-off-in-suspend;
 316                                         };
 317                                 };
 318
 319                                 ldo14_reg: LDO14 {
 320                                         regulator-name = "VGA_DVDD_1.8V";
 321                                         regulator-min-microvolt = <1800000>;
 322                                         regulator-max-microvolt = <1800000>;
 323
 324                                         regulator-state-mem {
 325                                                 regulator-off-in-suspend;
 326                                         };
 327                                 };
 328
 329                                 ldo15_reg: LDO15 {
 330                                         regulator-name = "CAM_ISP_HOST_2.8V";
 331                                         regulator-min-microvolt = <2800000>;
 332                                         regulator-max-microvolt = <2800000>;
 333
 334                                         regulator-state-mem {
 335                                                 regulator-off-in-suspend;
 336                                         };
 337                                 };
 338
 339                                 ldo16_reg: LDO16 {
 340                                         regulator-name = "VGA_AVDD_2.8V";
 341                                         regulator-min-microvolt = <2800000>;
 342                                         regulator-max-microvolt = <2800000>;
 343
 344                                         regulator-state-mem {
 345                                                 regulator-off-in-suspend;
 346                                         };
 347                                 };
 348
 349                                 ldo17_reg: LDO17 {
 350                                         regulator-name = "VCC_3.0V_LCD";
 351                                         regulator-min-microvolt = <3000000>;
 352                                         regulator-max-microvolt = <3000000>;
 353
 354                                         regulator-state-mem {
 355                                                 regulator-off-in-suspend;
 356                                         };
 357                                 };
 358
 359                                 buck1_reg: BUCK1 {
 360                                         regulator-name = "vddarm";
 361                                         regulator-min-microvolt = <750000>;
 362                                         regulator-max-microvolt = <1500000>;
 363
 364                                         regulator-state-mem {
 365                                                 regulator-off-in-suspend;
 366                                                 regulator-suspend-microvolt = <1250000>;
 367                                         };
 368                                 };
 369
 370                                 buck2_reg: BUCK2 {
 371                                         regulator-name = "vddint";
 372                                         regulator-min-microvolt = <750000>;
 373                                         regulator-max-microvolt = <1500000>;
 374
 375                                         regulator-state-mem {
 376                                                 regulator-off-in-suspend;
 377                                                 regulator-suspend-microvolt = <1100000>;
 378                                         };
 379                                 };
 380
 381                                 buck3_reg: BUCK3 {
 382                                         regulator-name = "VCC_1.8V";
 383                                         regulator-min-microvolt = <1800000>;
 384                                         regulator-max-microvolt = <1800000>;
 385                                         regulator-always-on;
 386                                 };
 387
 388                                 buck4_reg: BUCK4 {
 389                                         regulator-name = "CAM_ISP_CORE_1.2V";
 390                                         regulator-min-microvolt = <1200000>;
 391                                         regulator-max-microvolt = <1200000>;
 392
 393                                         regulator-state-mem {
 394                                                 regulator-off-in-suspend;
 395                                         };
 396                                 };
 397
 398                                 ap32khz_reg: EN32KHz-AP {
 399                                         regulator-name = "32KHz AP";
 400                                         regulator-always-on;
 401                                 };
 402
 403                                 cp32khz_reg: EN32KHz-CP {
 404                                         regulator-name = "32KHz CP";
 405                                 };
 406
 407                                 vichg_reg: ENVICHG {
 408                                         regulator-name = "VICHG";
 409                                         regulator-always-on;
 410                                 };
 411
 412                                 safe1_sreg: ESAFEOUT1 {
 413                                         regulator-name = "SAFEOUT1";
 414                                 };
 415
 416                                 safe2_sreg: ESAFEOUT2 {
 417                                         regulator-name = "SAFEOUT2";
 418                                 };
 419                         };
 420                 };
 421         };
 422
 423         i2c_musb: i2c-gpio-3 {
 424                 compatible = "i2c-gpio";
 425                 sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 426                 scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 427                 i2c-gpio,delay-us = <2>;
 428                 #address-cells = <1>;
 429                 #size-cells = <0>;
 430
 431                 pinctrl-names = "default";
 432                 pinctrl-0 = <&musb_i2c_pins>;
 433
 434                 fsa9480: musb@25 {
 435                         compatible = "fcs,fsa9480";
 436                         reg = <0x25>;
 437                         interrupt-parent = <&gph2>;
 438                         interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 439
 440                         pinctrl-names = "default";
 441                         pinctrl-0 = <&musb_irq>;
 442                 };
 443         };
 444
 445         i2c_fuel: i2c-gpio-4 {
 446                 compatible = "i2c-gpio";
 447                 sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 448                 scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 449                 i2c-gpio,delay-us = <2>;
 450                 #address-cells = <1>;
 451                 #size-cells = <0>;
 452
 453                 pinctrl-names = "default";
 454                 pinctrl-0 = <&fg_i2c_pins>;
 455
 456                 fg: fuelgauge@36 {
 457                         compatible = "maxim,max17040";
 458                         reg = <0x36>;
 459                 };
 460         };
 461
 462         i2c_touchkey: i2c-gpio-5 {
 463                 compatible = "i2c-gpio";
 464                 sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 465                 scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 466                 i2c-gpio,delay-us = <2>;
 467                 #address-cells = <1>;
 468                 #size-cells = <0>;
 469
 470                 pinctrl-names = "default";
 471                 pinctrl-0 = <&touchkey_i2c_pins>;
 472
 473                 touchkey@20 {
 474                         compatible = "cypress,aries-touchkey";
 475                         reg = <0x20>;
 476                         vdd-supply = <&touchkey_vdd>;
 477                         vcc-supply = <&buck3_reg>;
 478                         linux,keycodes = <KEY_MENU KEY_BACK
 479                                           KEY_HOMEPAGE KEY_SEARCH>;
 480                         interrupt-parent = <&gpj4>;
 481                         interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 482
 483                         pinctrl-names = "default";
 484                         pinctrl-0 = <&touchkey_irq>;
 485                 };
 486         };
 487
 488         i2c_prox: i2c-gpio-6 {
 489                 compatible = "i2c-gpio";
 490                 sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 491                 scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 492                 i2c-gpio,delay-us = <2>;
 493                 #address-cells = <1>;
 494                 #size-cells = <0>;
 495
 496                 pinctrl-names = "default";
 497                 pinctrl-0 = <&prox_i2c_pins>;
 498
 499                 light-sensor@44 {
 500                         compatible = "sharp,gp2ap002a00f";
 501                         reg = <0x44>;
 502                         interrupt-parent = <&gph0>;
 503                         interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 504                         vdd-supply = <&gp2a_vled>;
 505                         vio-supply = <&gp2a_vled>;
 506                         io-channels = <&gp2a_shunt>;
 507                         io-channel-names = "alsout";
 508                         sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
 509                         sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
 510
 511                         pinctrl-names = "default";
 512                         pinctrl-0 = <&gp2a_irq>;
 513                 };
 514         };
 515
 516         i2c_magnetometer: i2c-gpio-7 {
 517                 compatible = "i2c-gpio";
 518                 sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 519                 scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 520                 i2c-gpio,delay-us = <2>;
 521                 #address-cells = <1>;
 522                 #size-cells = <0>;
 523
 524                 pinctrl-names = "default";
 525                 pinctrl-0 = <&magnetometer_i2c_pins>;
 526
 527                 status = "disabled";
 528
 529                 /* Yamaha yas529 magnetometer, no mainline binding */
 530         };
 531
 532         vibrator: pwm-vibrator {
 533                 compatible = "pwm-vibrator";
 534                 pwms = <&pwm 1 44642 0>;
 535                 pwm-names = "enable";
 536                 vcc-supply = <&vibrator_pwr>;
 537                 pinctrl-names = "default";
 538                 pinctrl-0 = <&pwm1_out>;
 539         };
 540
 541         poweroff: syscon-poweroff {
 542                 compatible = "syscon-poweroff";
 543                 regmap = <&pmu_syscon>;
 544                 offset = <0x681c>; /* PS_HOLD_CONTROL */
 545                 value = <0x5200>;
 546         };
 547
 548         spi_lcd: spi-2 {
 549                 compatible = "spi-gpio";
 550                 #address-cells = <1>;
 551                 #size-cells = <0>;
 552
 553                 sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>;
 554                 mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>;
 555                 cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>;
 556                 num-chipselects = <1>;
 557
 558                 pinctrl-names = "default";
 559                 pinctrl-0 = <&lcd_spi_pins>;
 560
 561                 panel@0 {
 562                         compatible = "samsung,s6e63m0";
 563                         reg = <0>;
 564                         reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
 565                         vdd3-supply = <&ldo7_reg>;
 566                         vci-supply = <&ldo17_reg>;
 567                         spi-cs-high;
 568                         spi-max-frequency = <1200000>;
 569
 570                         pinctrl-names = "default";
 571                         pinctrl-0 = <&panel_rst>;
 572
 573                         port {
 574                                 lcd_ep: endpoint {
 575                                         remote-endpoint = <&fimd_ep>;
 576                                 };
 577                         };
 578                 };
 579         };
 580 };
 581
 582 &adc {
 583         vdd-supply = <&ldo4_reg>;
 584
 585         status = "okay";
 586
 587         gp2a_shunt: current-sense-shunt {
 588                 compatible = "current-sense-shunt";
 589                 io-channels = <&adc 9>;
 590                 shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */
 591                 #io-channel-cells = <0>;
 592         };
 593 };
 594
 595 &fimd {
 596         pinctrl-names = "default";
 597         pinctrl-0 = <&lcd_clk &lcd_data24>;
 598         status = "okay";
 599
 600         samsung,invert-vden;
 601         samsung,invert-vclk;
 602
 603         #address-cells = <1>;
 604         #size-cells = <0>;
 605
 606         port@3 {
 607                 reg = <3>;
 608                 fimd_ep: endpoint {
 609                         remote-endpoint = <&lcd_ep>;
 610                 };
 611         };
 612 };
 613
 614 &hsotg {
 615         vusb_a-supply = <&ldo8_reg>;
 616         vusb_d-supply = <&ldo3_reg>;
 617         dr_mode = "peripheral";
 618         status = "okay";
 619 };
 620
 621 &i2c2 {
 622         samsung,i2c-sda-delay = <100>;
 623         samsung,i2c-max-bus-freq = <400000>;
 624         samsung,i2c-slave-addr = <0x10>;
 625         status = "okay";
 626
 627         touchscreen@4a {
 628                 compatible = "atmel,maxtouch";
 629                 reg = <0x4a>;
 630                 interrupt-parent = <&gpj0>;
 631                 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 632                 pinctrl-names = "default";
 633                 pinctrl-0 = <&ts_irq>;
 634                 reset-gpios = <&gpj1 3 GPIO_ACTIVE_LOW>;
 635         };
 636 };
 637
 638 &i2s0 {
 639         dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>;
 640         status = "okay";
 641 };
 642
 643 &mfc {
 644         memory-region = <&mfc_left>, <&mfc_right>;
 645 };
 646
 647 &pinctrl0 {
 648         bt_reset: bt-reset {
 649                 samsung,pins = "gpb-3";
 650                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 651                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 652                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 653         };
 654
 655         wlan_bt_en: wlan-bt-en {
 656                 samsung,pins = "gpb-5";
 657                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 658                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 659                 samsung,pin-val = <1>;
 660         };
 661
 662         codec_ldo: codec-ldo {
 663                 samsung,pins = "gpf3-4";
 664                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 665                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 666         };
 667
 668         prox_i2c_pins: gp2a-i2c-pins {
 669                 samsung,pins = "gpg0-2", "gpg2-2";
 670                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 671                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 672         };
 673
 674         wlan_gpio_rst: wlan-gpio-rst {
 675                 samsung,pins = "gpg1-2";
 676                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 677                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 678         };
 679
 680         bt_wake: bt-wake {
 681                 samsung,pins = "gpg3-4";
 682                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 683                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 684         };
 685
 686         gp2a_irq: gp2a-irq {
 687                 samsung,pins = "gph0-2";
 688                 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 689                 samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 690                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 691         };
 692
 693         pmic_dvs_pins: pmic-dvs-pins {
 694                 samsung,pins = "gph0-3", "gph0-4", "gph0-5";
 695                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 696                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 697                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 698                 samsung,pin-val = <0>;
 699         };
 700
 701         pmic_irq: pmic-irq {
 702                 samsung,pins = "gph0-7";
 703                 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 704                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 705                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 706         };
 707
 708         wifi_host_wake: wifi-host-wake {
 709                 samsung,pins = "gph2-4";
 710                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 711                 samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 712                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 713         };
 714
 715         bt_host_wake: bt-host-wake {
 716                 samsung,pins = "gph2-5";
 717                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 718                 samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 719                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 720         };
 721
 722         musb_irq: musq-irq {
 723                 samsung,pins = "gph2-7";
 724                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 725                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 726                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 727         };
 728
 729         tf_detect: tf-detect {
 730                 samsung,pins = "gph3-4";
 731                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 732                 samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 733                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 734         };
 735
 736         wifi_wake: wifi-wake {
 737                 samsung,pins = "gph3-5";
 738                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 739                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 740         };
 741
 742         magnetometer_i2c_pins: yas529-i2c-pins {
 743                 samsung,pins = "gpj0-0", "gpj0-1";
 744                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 745                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 746         };
 747
 748         ts_irq: ts-irq {
 749                 samsung,pins = "gpj0-5";
 750                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 751                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 752                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 753         };
 754
 755         vibrator_ena: vibrator-ena {
 756                 samsung,pins = "gpj1-1";
 757                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 758                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 759         };
 760
 761         gp2a_power: gp2a-power {
 762                 samsung,pins = "gpj1-4";
 763                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 764                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 765                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 766         };
 767
 768         touchkey_i2c_pins: touchkey-i2c-pins {
 769                 samsung,pins = "gpj3-0", "gpj3-1";
 770                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 771                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 772         };
 773
 774         touchkey_vdd_ena: touchkey-vdd-ena {
 775                 samsung,pins = "gpj3-2";
 776                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 777                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 778         };
 779
 780         musb_i2c_pins: musb-i2c-pins {
 781                 samsung,pins = "gpj3-4", "gpj3-5";
 782                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 783                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 784         };
 785
 786         accel_i2c_pins: accel-i2c-pins {
 787                 samsung,pins = "gpj3-6", "gpj3-7";
 788                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 789                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 790         };
 791
 792         pmic_i2c_pins: pmic-i2c-pins {
 793                 samsung,pins = "gpj4-0", "gpj4-3";
 794                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 795                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 796         };
 797
 798         touchkey_irq: touchkey-irq {
 799                 samsung,pins = "gpj4-1";
 800                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 801                 samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 802                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 803         };
 804
 805         lcd_spi_pins: spi-lcd-pins {
 806                 samsung,pins = "mp01-1", "mp04-1", "mp04-3";
 807                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 808                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 809         };
 810
 811         fg_i2c_pins: fg-i2c-pins {
 812                 samsung,pins = "mp05-0", "mp05-1";
 813                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 814                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 815         };
 816
 817         sound_i2c_pins: sound-i2c-pins {
 818                 samsung,pins = "mp05-2", "mp05-3";
 819                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 820                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 821         };
 822
 823         panel_rst: panel-rst {
 824                 samsung,pins = "mp05-5";
 825                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 826                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 827         };
 828 };
 829
 830 &pwm {
 831         samsung,pwm-outputs = <1>;
 832 };
 833
 834 &rtc {
 835         clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
 836         clock-names = "rtc", "rtc_src";
 837 };
 838
 839 &sdhci1 {
 840         #address-cells = <1>;
 841         #size-cells = <0>;
 842
 843         bus-width = <4>;
 844         max-frequency = <38400000>;
 845         pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>;
 846         pinctrl-names = "default";
 847         cap-sd-highspeed;
 848         cap-mmc-highspeed;
 849         keep-power-in-suspend;
 850
 851         mmc-pwrseq = <&wifi_pwrseq>;
 852         non-removable;
 853         status = "okay";
 854
 855         assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>;
 856         assigned-clock-rates = <0>, <50000000>;
 857         assigned-clock-parents = <&clocks MOUT_MPLL>;
 858
 859         wlan@1 {
 860                 reg = <1>;
 861                 compatible = "brcm,bcm4329-fmac";
 862                 interrupt-parent = <&gph2>;
 863                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 864                 interrupt-names = "host-wake";
 865         };
 866 };
 867
 868 &sdhci2 {
 869         bus-width = <4>;
 870         cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>;
 871         vmmc-supply = <&ldo5_reg>;
 872         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
 873         pinctrl-names = "default";
 874         status = "okay";
 875
 876         assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>;
 877         assigned-clock-rates = <0>, <50000000>;
 878         assigned-clock-parents = <&clocks MOUT_MPLL>;
 879 };
 880
 881 &uart0 {
 882         assigned-clocks = <&clocks MOUT_UART0>, <&clocks SCLK_UART0>;
 883         assigned-clock-rates = <0>, <111166667>;
 884         assigned-clock-parents = <&clocks MOUT_MPLL>;
 885
 886         status = "okay";
 887
 888         bluetooth {
 889                 compatible = "brcm,bcm4329-bt";
 890                 max-speed = <3000000>;
 891                 pinctrl-names = "default";
 892                 pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake
 893                              &bt_reset &bt_wake>;
 894                 shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>;
 895                 device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
 896                 interrupt-parent = <&gph2>;
 897                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 898                 interrupt-names = "host-wake";
 899         };
 900 };
 901
 902 &uart1 {
 903         status = "okay";
 904 };
 905
 906 &uart2 {
 907         status = "okay";
 908 };
 909
 910 &usbphy {
 911         status = "okay";
 912         vbus-supply = <&safe1_sreg>;
 913 };
 914
 915 &xusbxti {
 916         clock-frequency = <24000000>;
 917 };