Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
[linux/fpc-iii.git] / arch / arm / boot / dts / stih407-family.dtsi
blob23a1746f3baa8354a0a03f38b944461b136c80ee
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2014 STMicroelectronics Limited.
4  * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
5  */
6 #include "stih407-pinctrl.dtsi"
7 #include <dt-bindings/mfd/st-lpc.h>
8 #include <dt-bindings/phy/phy.h>
9 #include <dt-bindings/reset/stih407-resets.h>
10 #include <dt-bindings/interrupt-controller/irq-st.h>
11 / {
12         #address-cells = <1>;
13         #size-cells = <1>;
15         reserved-memory {
16                 #address-cells = <1>;
17                 #size-cells = <1>;
18                 ranges;
20                 gp0_reserved: rproc@45000000 {
21                         compatible = "shared-dma-pool";
22                         reg = <0x45000000 0x00400000>;
23                         no-map;
24                 };
26                 delta_reserved: rproc@44000000 {
27                         compatible = "shared-dma-pool";
28                         reg = <0x44000000 0x01000000>;
29                         no-map;
30                 };
31         };
33         cpus {
34                 #address-cells = <1>;
35                 #size-cells = <0>;
36                 cpu@0 {
37                         device_type = "cpu";
38                         compatible = "arm,cortex-a9";
39                         reg = <0>;
41                         /* u-boot puts hpen in SBC dmem at 0xa4 offset */
42                         cpu-release-addr = <0x94100A4>;
44                                          /* kHz     uV   */
45                         operating-points = <1500000 0
46                                             1200000 0
47                                             800000  0
48                                             500000  0>;
50                         clocks = <&clk_m_a9>;
51                         clock-names = "cpu";
52                         clock-latency = <100000>;
53                         cpu0-supply = <&pwm_regulator>;
54                         st,syscfg = <&syscfg_core 0x8e0>;
55                 };
56                 cpu@1 {
57                         device_type = "cpu";
58                         compatible = "arm,cortex-a9";
59                         reg = <1>;
61                         /* u-boot puts hpen in SBC dmem at 0xa4 offset */
62                         cpu-release-addr = <0x94100A4>;
64                                          /* kHz     uV   */
65                         operating-points = <1500000 0
66                                             1200000 0
67                                             800000  0
68                                             500000  0>;
69                 };
70         };
72         intc: interrupt-controller@8761000 {
73                 compatible = "arm,cortex-a9-gic";
74                 #interrupt-cells = <3>;
75                 interrupt-controller;
76                 reg = <0x08761000 0x1000>, <0x08760100 0x100>;
77         };
79         scu@8760000 {
80                 compatible = "arm,cortex-a9-scu";
81                 reg = <0x08760000 0x1000>;
82         };
84         timer@8760200 {
85                 interrupt-parent = <&intc>;
86                 compatible = "arm,cortex-a9-global-timer";
87                 reg = <0x08760200 0x100>;
88                 interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
89                 clocks = <&arm_periph_clk>;
90         };
92         l2: cache-controller@8762000 {
93                 compatible = "arm,pl310-cache";
94                 reg = <0x08762000 0x1000>;
95                 arm,data-latency = <3 3 3>;
96                 arm,tag-latency = <2 2 2>;
97                 cache-unified;
98                 cache-level = <2>;
99         };
101         arm-pmu {
102                 interrupt-parent = <&intc>;
103                 compatible = "arm,cortex-a9-pmu";
104                 interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
105         };
107         pwm_regulator: pwm-regulator {
108                 compatible = "pwm-regulator";
109                 pwms = <&pwm1 3 8448>;
110                 regulator-name = "CPU_1V0_AVS";
111                 regulator-min-microvolt = <784000>;
112                 regulator-max-microvolt = <1299000>;
113                 regulator-always-on;
114                 max-duty-cycle = <255>;
115                 status = "okay";
116         };
118         soc {
119                 #address-cells = <1>;
120                 #size-cells = <1>;
121                 interrupt-parent = <&intc>;
122                 ranges;
123                 compatible = "simple-bus";
125                 restart: restart-controller@0 {
126                         compatible = "st,stih407-restart";
127                         reg = <0 0>;
128                         st,syscfg = <&syscfg_sbc_reg>;
129                         status = "okay";
130                 };
132                 powerdown: powerdown-controller@0 {
133                         compatible = "st,stih407-powerdown";
134                         reg = <0 0>;
135                         #reset-cells = <1>;
136                 };
138                 softreset: softreset-controller@0 {
139                         compatible = "st,stih407-softreset";
140                         reg = <0 0>;
141                         #reset-cells = <1>;
142                 };
144                 picophyreset: picophyreset-controller@0 {
145                         compatible = "st,stih407-picophyreset";
146                         reg = <0 0>;
147                         #reset-cells = <1>;
148                 };
150                 syscfg_sbc: sbc-syscfg@9620000 {
151                         compatible = "st,stih407-sbc-syscfg", "syscon";
152                         reg = <0x9620000 0x1000>;
153                 };
155                 syscfg_front: front-syscfg@9280000 {
156                         compatible = "st,stih407-front-syscfg", "syscon";
157                         reg = <0x9280000 0x1000>;
158                 };
160                 syscfg_rear: rear-syscfg@9290000 {
161                         compatible = "st,stih407-rear-syscfg", "syscon";
162                         reg = <0x9290000 0x1000>;
163                 };
165                 syscfg_flash: flash-syscfg@92a0000 {
166                         compatible = "st,stih407-flash-syscfg", "syscon";
167                         reg = <0x92a0000 0x1000>;
168                 };
170                 syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
171                         compatible = "st,stih407-sbc-reg-syscfg", "syscon";
172                         reg = <0x9600000 0x1000>;
173                 };
175                 syscfg_core: core-syscfg@92b0000 {
176                         compatible = "st,stih407-core-syscfg", "syscon";
177                         reg = <0x92b0000 0x1000>;
179                         sti_sasg_codec: sti-sasg-codec {
180                                 compatible = "st,stih407-sas-codec";
181                                 #sound-dai-cells = <1>;
182                                 status = "disabled";
183                                 st,syscfg = <&syscfg_core>;
184                         };
185                 };
187                 syscfg_lpm: lpm-syscfg@94b5100 {
188                         compatible = "st,stih407-lpm-syscfg", "syscon";
189                         reg = <0x94b5100 0x1000>;
190                 };
192                 irq-syscfg@0 {
193                         compatible    = "st,stih407-irq-syscfg";
194                         reg = <0 0>;
195                         st,syscfg     = <&syscfg_core>;
196                         st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
197                                         <ST_IRQ_SYSCFG_PMU_1>;
198                         st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
199                                         <ST_IRQ_SYSCFG_DISABLED>;
200                 };
202                 /* Display */
203                 vtg_main: sti-vtg-main@8d02800 {
204                         compatible = "st,vtg";
205                         reg = <0x8d02800 0x200>;
206                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
207                 };
209                 vtg_aux: sti-vtg-aux@8d00200 {
210                         compatible = "st,vtg";
211                         reg = <0x8d00200 0x100>;
212                         interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
213                 };
215                 serial@9830000 {
216                         compatible = "st,asc";
217                         reg = <0x9830000 0x2c>;
218                         interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
219                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
220                         /* Pinctrl moved out to a per-board configuration */
222                         status = "disabled";
223                 };
225                 serial@9831000 {
226                         compatible = "st,asc";
227                         reg = <0x9831000 0x2c>;
228                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
229                         pinctrl-names = "default";
230                         pinctrl-0 = <&pinctrl_serial1>;
231                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
233                         status = "disabled";
234                 };
236                 serial@9832000 {
237                         compatible = "st,asc";
238                         reg = <0x9832000 0x2c>;
239                         interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
240                         pinctrl-names = "default";
241                         pinctrl-0 = <&pinctrl_serial2>;
242                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
244                         status = "disabled";
245                 };
247                 /* SBC_ASC0 - UART10 */
248                 sbc_serial0: serial@9530000 {
249                         compatible = "st,asc";
250                         reg = <0x9530000 0x2c>;
251                         interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
252                         pinctrl-names = "default";
253                         pinctrl-0 = <&pinctrl_sbc_serial0>;
254                         clocks = <&clk_sysin>;
256                         status = "disabled";
257                 };
259                 serial@9531000 {
260                         compatible = "st,asc";
261                         reg = <0x9531000 0x2c>;
262                         interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
263                         pinctrl-names = "default";
264                         pinctrl-0 = <&pinctrl_sbc_serial1>;
265                         clocks = <&clk_sysin>;
267                         status = "disabled";
268                 };
270                 i2c@9840000 {
271                         compatible = "st,comms-ssc4-i2c";
272                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
273                         reg = <0x9840000 0x110>;
274                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
275                         clock-names = "ssc";
276                         clock-frequency = <400000>;
277                         pinctrl-names = "default";
278                         pinctrl-0 = <&pinctrl_i2c0_default>;
279                         #address-cells = <1>;
280                         #size-cells = <0>;
282                         status = "disabled";
283                 };
285                 i2c@9841000 {
286                         compatible = "st,comms-ssc4-i2c";
287                         reg = <0x9841000 0x110>;
288                         interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
289                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
290                         clock-names = "ssc";
291                         clock-frequency = <400000>;
292                         pinctrl-names = "default";
293                         pinctrl-0 = <&pinctrl_i2c1_default>;
294                         #address-cells = <1>;
295                         #size-cells = <0>;
297                         status = "disabled";
298                 };
300                 i2c@9842000 {
301                         compatible = "st,comms-ssc4-i2c";
302                         reg = <0x9842000 0x110>;
303                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
304                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
305                         clock-names = "ssc";
306                         clock-frequency = <400000>;
307                         pinctrl-names = "default";
308                         pinctrl-0 = <&pinctrl_i2c2_default>;
309                         #address-cells = <1>;
310                         #size-cells = <0>;
312                         status = "disabled";
313                 };
315                 i2c@9843000 {
316                         compatible = "st,comms-ssc4-i2c";
317                         reg = <0x9843000 0x110>;
318                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
319                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
320                         clock-names = "ssc";
321                         clock-frequency = <400000>;
322                         pinctrl-names = "default";
323                         pinctrl-0 = <&pinctrl_i2c3_default>;
324                         #address-cells = <1>;
325                         #size-cells = <0>;
327                         status = "disabled";
328                 };
330                 i2c@9844000 {
331                         compatible = "st,comms-ssc4-i2c";
332                         reg = <0x9844000 0x110>;
333                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
334                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
335                         clock-names = "ssc";
336                         clock-frequency = <400000>;
337                         pinctrl-names = "default";
338                         pinctrl-0 = <&pinctrl_i2c4_default>;
339                         #address-cells = <1>;
340                         #size-cells = <0>;
342                         status = "disabled";
343                 };
345                 i2c@9845000 {
346                         compatible = "st,comms-ssc4-i2c";
347                         reg = <0x9845000 0x110>;
348                         interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
349                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
350                         clock-names = "ssc";
351                         clock-frequency = <400000>;
352                         pinctrl-names = "default";
353                         pinctrl-0 = <&pinctrl_i2c5_default>;
354                         #address-cells = <1>;
355                         #size-cells = <0>;
357                         status = "disabled";
358                 };
361                 /* SSCs on SBC */
362                 i2c@9540000 {
363                         compatible = "st,comms-ssc4-i2c";
364                         reg = <0x9540000 0x110>;
365                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
366                         clocks = <&clk_sysin>;
367                         clock-names = "ssc";
368                         clock-frequency = <400000>;
369                         pinctrl-names = "default";
370                         pinctrl-0 = <&pinctrl_i2c10_default>;
371                         #address-cells = <1>;
372                         #size-cells = <0>;
374                         status = "disabled";
375                 };
377                 i2c@9541000 {
378                         compatible = "st,comms-ssc4-i2c";
379                         reg = <0x9541000 0x110>;
380                         interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
381                         clocks = <&clk_sysin>;
382                         clock-names = "ssc";
383                         clock-frequency = <400000>;
384                         pinctrl-names = "default";
385                         pinctrl-0 = <&pinctrl_i2c11_default>;
386                         #address-cells = <1>;
387                         #size-cells = <0>;
389                         status = "disabled";
390                 };
392                 usb2_picophy0: phy1@0 {
393                         compatible = "st,stih407-usb2-phy";
394                         reg = <0 0>;
395                         #phy-cells = <0>;
396                         st,syscfg = <&syscfg_core 0x100 0xf4>;
397                         resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
398                                  <&picophyreset STIH407_PICOPHY2_RESET>;
399                         reset-names = "global", "port";
400                 };
402                 miphy28lp_phy: miphy28lp@0 {
403                         compatible = "st,miphy28lp-phy";
404                         st,syscfg = <&syscfg_core>;
405                         #address-cells  = <1>;
406                         #size-cells     = <1>;
407                         ranges;
408                         reg = <0 0>;
410                         phy_port0: port@9b22000 {
411                                 reg = <0x9b22000 0xff>,
412                                       <0x9b09000 0xff>,
413                                       <0x9b04000 0xff>;
414                                 reg-names = "sata-up",
415                                             "pcie-up",
416                                             "pipew";
418                                 st,syscfg = <0x114 0x818 0xe0 0xec>;
419                                 #phy-cells = <1>;
421                                 reset-names = "miphy-sw-rst";
422                                 resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
423                         };
425                         phy_port1: port@9b2a000 {
426                                 reg = <0x9b2a000 0xff>,
427                                       <0x9b19000 0xff>,
428                                       <0x9b14000 0xff>;
429                                 reg-names = "sata-up",
430                                             "pcie-up",
431                                             "pipew";
433                                 st,syscfg = <0x118 0x81c 0xe4 0xf0>;
435                                 #phy-cells = <1>;
437                                 reset-names = "miphy-sw-rst";
438                                 resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
439                         };
441                         phy_port2: port@8f95000 {
442                                 reg = <0x8f95000 0xff>,
443                                       <0x8f90000 0xff>;
444                                 reg-names = "pipew",
445                                             "usb3-up";
447                                 st,syscfg = <0x11c 0x820>;
449                                 #phy-cells = <1>;
451                                 reset-names = "miphy-sw-rst";
452                                 resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
453                         };
454                 };
456                 spi@9840000 {
457                         compatible = "st,comms-ssc4-spi";
458                         reg = <0x9840000 0x110>;
459                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
460                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
461                         clock-names = "ssc";
462                         pinctrl-0 = <&pinctrl_spi0_default>;
463                         pinctrl-names = "default";
464                         #address-cells = <1>;
465                         #size-cells = <0>;
467                         status = "disabled";
468                 };
470                 spi@9841000 {
471                         compatible = "st,comms-ssc4-spi";
472                         reg = <0x9841000 0x110>;
473                         interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
474                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
475                         clock-names = "ssc";
476                         pinctrl-names = "default";
477                         pinctrl-0 = <&pinctrl_spi1_default>;
478                         #address-cells = <1>;
479                         #size-cells = <0>;
481                         status = "disabled";
482                 };
484                 spi@9842000 {
485                         compatible = "st,comms-ssc4-spi";
486                         reg = <0x9842000 0x110>;
487                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
488                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
489                         clock-names = "ssc";
490                         pinctrl-names = "default";
491                         pinctrl-0 = <&pinctrl_spi2_default>;
492                         #address-cells = <1>;
493                         #size-cells = <0>;
495                         status = "disabled";
496                 };
498                 spi@9843000 {
499                         compatible = "st,comms-ssc4-spi";
500                         reg = <0x9843000 0x110>;
501                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
502                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
503                         clock-names = "ssc";
504                         pinctrl-names = "default";
505                         pinctrl-0 = <&pinctrl_spi3_default>;
506                         #address-cells = <1>;
507                         #size-cells = <0>;
509                         status = "disabled";
510                 };
512                 spi@9844000 {
513                         compatible = "st,comms-ssc4-spi";
514                         reg = <0x9844000 0x110>;
515                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
516                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
517                         clock-names = "ssc";
518                         pinctrl-names = "default";
519                         pinctrl-0 = <&pinctrl_spi4_default>;
520                         #address-cells = <1>;
521                         #size-cells = <0>;
523                         status = "disabled";
524                 };
526                 /* SBC SSC */
527                 spi@9540000 {
528                         compatible = "st,comms-ssc4-spi";
529                         reg = <0x9540000 0x110>;
530                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
531                         clocks = <&clk_sysin>;
532                         clock-names = "ssc";
533                         pinctrl-names = "default";
534                         pinctrl-0 = <&pinctrl_spi10_default>;
535                         #address-cells = <1>;
536                         #size-cells = <0>;
538                         status = "disabled";
539                 };
541                 spi@9541000 {
542                         compatible = "st,comms-ssc4-spi";
543                         reg = <0x9541000 0x110>;
544                         interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
545                         clocks = <&clk_sysin>;
546                         clock-names = "ssc";
547                         pinctrl-names = "default";
548                         pinctrl-0 = <&pinctrl_spi11_default>;
549                         #address-cells = <1>;
550                         #size-cells = <0>;
552                         status = "disabled";
553                 };
555                 spi@9542000 {
556                         compatible = "st,comms-ssc4-spi";
557                         reg = <0x9542000 0x110>;
558                         interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
559                         clocks = <&clk_sysin>;
560                         clock-names = "ssc";
561                         pinctrl-names = "default";
562                         pinctrl-0 = <&pinctrl_spi12_default>;
563                         #address-cells = <1>;
564                         #size-cells = <0>;
566                         status = "disabled";
567                 };
569                 mmc0: sdhci@9060000 {
570                         compatible = "st,sdhci-stih407", "st,sdhci";
571                         status = "disabled";
572                         reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
573                         reg-names = "mmc", "top-mmc-delay";
574                         interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
575                         interrupt-names = "mmcirq";
576                         pinctrl-names = "default";
577                         pinctrl-0 = <&pinctrl_mmc0>;
578                         clock-names = "mmc", "icn";
579                         clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
580                                  <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
581                         bus-width = <8>;
582                 };
584                 mmc1: sdhci@9080000 {
585                         compatible = "st,sdhci-stih407", "st,sdhci";
586                         status = "disabled";
587                         reg = <0x09080000 0x7ff>;
588                         reg-names = "mmc";
589                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
590                         interrupt-names = "mmcirq";
591                         pinctrl-names = "default";
592                         pinctrl-0 = <&pinctrl_sd1>;
593                         clock-names = "mmc", "icn";
594                         clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
595                                  <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
596                         resets = <&softreset STIH407_MMC1_SOFTRESET>;
597                         bus-width = <4>;
598                 };
600                 /* Watchdog and Real-Time Clock */
601                 lpc@8787000 {
602                         compatible = "st,stih407-lpc";
603                         reg = <0x8787000 0x1000>;
604                         interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
605                         clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
606                         timeout-sec = <120>;
607                         st,syscfg = <&syscfg_core>;
608                         st,lpc-mode = <ST_LPC_MODE_WDT>;
609                 };
611                 lpc@8788000 {
612                         compatible = "st,stih407-lpc";
613                         reg = <0x8788000 0x1000>;
614                         interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
615                         clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
616                         st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
617                 };
619                 sata0: sata@9b20000 {
620                         compatible = "st,ahci";
621                         reg = <0x9b20000 0x1000>;
623                         interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
624                         interrupt-names = "hostc";
626                         phys = <&phy_port0 PHY_TYPE_SATA>;
627                         phy-names = "ahci_phy";
629                         resets = <&powerdown STIH407_SATA0_POWERDOWN>,
630                                  <&softreset STIH407_SATA0_SOFTRESET>,
631                                  <&softreset STIH407_SATA0_PWR_SOFTRESET>;
632                         reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
634                         clock-names = "ahci_clk";
635                         clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
637                         ports-implemented = <0x1>;
639                         status = "disabled";
640                 };
642                 sata1: sata@9b28000 {
643                         compatible = "st,ahci";
644                         reg = <0x9b28000 0x1000>;
646                         interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
647                         interrupt-names = "hostc";
649                         phys = <&phy_port1 PHY_TYPE_SATA>;
650                         phy-names = "ahci_phy";
652                         resets = <&powerdown STIH407_SATA1_POWERDOWN>,
653                                  <&softreset STIH407_SATA1_SOFTRESET>,
654                                  <&softreset STIH407_SATA1_PWR_SOFTRESET>;
655                         reset-names = "pwr-dwn",
656                                       "sw-rst",
657                                       "pwr-rst";
659                         clock-names = "ahci_clk";
660                         clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
662                         ports-implemented = <0x1>;
664                         status = "disabled";
665                 };
668                 st_dwc3: dwc3@8f94000 {
669                         compatible      = "st,stih407-dwc3";
670                         reg             = <0x08f94000 0x1000>, <0x110 0x4>;
671                         reg-names       = "reg-glue", "syscfg-reg";
672                         st,syscfg       = <&syscfg_core>;
673                         resets          = <&powerdown STIH407_USB3_POWERDOWN>,
674                                           <&softreset STIH407_MIPHY2_SOFTRESET>;
675                         reset-names     = "powerdown", "softreset";
676                         #address-cells  = <1>;
677                         #size-cells     = <1>;
678                         pinctrl-names   = "default";
679                         pinctrl-0       = <&pinctrl_usb3>;
680                         ranges;
682                         status = "disabled";
684                         dwc3: dwc3@9900000 {
685                                 compatible      = "snps,dwc3";
686                                 reg             = <0x09900000 0x100000>;
687                                 interrupts      = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
688                                 dr_mode         = "host";
689                                 phy-names       = "usb2-phy", "usb3-phy";
690                                 phys            = <&usb2_picophy0>,
691                                                   <&phy_port2 PHY_TYPE_USB3>;
692                                 snps,dis_u3_susphy_quirk;
693                         };
694                 };
696                 /* COMMS PWM Module */
697                 pwm0: pwm@9810000 {
698                         compatible      = "st,sti-pwm";
699                         #pwm-cells      = <2>;
700                         reg             = <0x9810000 0x68>;
701                         interrupts      = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
702                         pinctrl-names   = "default";
703                         pinctrl-0       = <&pinctrl_pwm0_chan0_default>;
704                         clock-names     = "pwm";
705                         clocks          = <&clk_sysin>;
706                         st,pwm-num-chan = <1>;
708                         status          = "disabled";
709                 };
711                 /* SBC PWM Module */
712                 pwm1: pwm@9510000 {
713                         compatible      = "st,sti-pwm";
714                         #pwm-cells      = <2>;
715                         reg             = <0x9510000 0x68>;
716                         interrupts      = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
717                         pinctrl-names   = "default";
718                         pinctrl-0       = <&pinctrl_pwm1_chan0_default
719                                         &pinctrl_pwm1_chan1_default
720                                         &pinctrl_pwm1_chan2_default
721                                         &pinctrl_pwm1_chan3_default>;
722                         clock-names     = "pwm";
723                         clocks          = <&clk_sysin>;
724                         st,pwm-num-chan = <4>;
726                         status          = "disabled";
727                 };
729                 rng10: rng@8a89000 {
730                         compatible      = "st,rng";
731                         reg             = <0x08a89000 0x1000>;
732                         clocks          = <&clk_sysin>;
733                         status          = "okay";
734                 };
736                 rng11: rng@8a8a000 {
737                         compatible      = "st,rng";
738                         reg             = <0x08a8a000 0x1000>;
739                         clocks          = <&clk_sysin>;
740                         status          = "okay";
741                 };
743                 ethernet0: dwmac@9630000 {
744                         device_type = "network";
745                         status = "disabled";
746                         compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
747                         reg = <0x9630000 0x8000>, <0x80 0x4>;
748                         reg-names = "stmmaceth", "sti-ethconf";
750                         st,syscon = <&syscfg_sbc_reg 0x80>;
751                         st,gmac_en;
752                         resets = <&softreset STIH407_ETH1_SOFTRESET>;
753                         reset-names = "stmmaceth";
755                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
756                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
757                         interrupt-names = "macirq", "eth_wake_irq";
759                         /* DMA Bus Mode */
760                         snps,pbl = <8>;
762                         pinctrl-names = "default";
763                         pinctrl-0 = <&pinctrl_rgmii1>;
765                         clock-names = "stmmaceth", "sti-ethclk";
766                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
767                                  <&clk_s_c0_flexgen CLK_ETH_PHY>;
768                 };
770                 mailbox0: mailbox@8f00000  {
771                         compatible      = "st,stih407-mailbox";
772                         reg             = <0x8f00000 0x1000>;
773                         interrupts      = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
774                         #mbox-cells     = <2>;
775                         mbox-name       = "a9";
776                         status          = "okay";
777                 };
779                 mailbox1: mailbox@8f01000 {
780                         compatible      = "st,stih407-mailbox";
781                         reg             = <0x8f01000 0x1000>;
782                         #mbox-cells     = <2>;
783                         mbox-name       = "st231_gp_1";
784                         status          = "okay";
785                 };
787                 mailbox2: mailbox@8f02000 {
788                         compatible      = "st,stih407-mailbox";
789                         reg             = <0x8f02000 0x1000>;
790                         #mbox-cells     = <2>;
791                         mbox-name       = "st231_gp_0";
792                         status          = "okay";
793                 };
795                 mailbox3: mailbox@8f03000 {
796                         compatible      = "st,stih407-mailbox";
797                         reg             = <0x8f03000 0x1000>;
798                         #mbox-cells     = <2>;
799                         mbox-name       = "st231_audio_video";
800                         status          = "okay";
801                 };
803                 st231_gp0: st231-gp0@0 {
804                         compatible      = "st,st231-rproc";
805                         reg             = <0 0>;
806                         memory-region   = <&gp0_reserved>;
807                         resets          = <&softreset STIH407_ST231_GP0_SOFTRESET>;
808                         reset-names     = "sw_reset";
809                         clocks          = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
810                         clock-frequency = <600000000>;
811                         st,syscfg       = <&syscfg_core 0x22c>;
812                         #mbox-cells = <1>;
813                         mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
814                         mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
815                 };
817                 st231_delta: st231-delta@0 {
818                         compatible      = "st,st231-rproc";
819                         reg             = <0 0>;
820                         memory-region   = <&delta_reserved>;
821                         resets          = <&softreset STIH407_ST231_DMU_SOFTRESET>;
822                         reset-names     = "sw_reset";
823                         clocks          = <&clk_s_c0_flexgen CLK_ST231_DMU>;
824                         clock-frequency = <600000000>;
825                         st,syscfg       = <&syscfg_core 0x224>;
826                         #mbox-cells = <1>;
827                         mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
828                         mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
829                 };
831                 /* fdma audio */
832                 fdma0: dma-controller@8e20000 {
833                         compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
834                         reg = <0x8e20000 0x8000>,
835                               <0x8e30000 0x3000>,
836                               <0x8e37000 0x1000>,
837                               <0x8e38000 0x8000>;
838                         reg-names = "slimcore", "dmem", "peripherals", "imem";
839                         clocks = <&clk_s_c0_flexgen CLK_FDMA>,
840                                  <&clk_s_c0_flexgen CLK_EXT2F_A9>,
841                                  <&clk_s_c0_flexgen CLK_EXT2F_A9>,
842                                  <&clk_s_c0_flexgen CLK_EXT2F_A9>;
843                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
844                         dma-channels = <16>;
845                         #dma-cells = <3>;
846                 };
848                 /* fdma app */
849                 fdma1: dma-controller@8e40000 {
850                         compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
851                         reg = <0x8e40000 0x8000>,
852                               <0x8e50000 0x3000>,
853                               <0x8e57000 0x1000>,
854                               <0x8e58000 0x8000>;
855                         reg-names = "slimcore", "dmem", "peripherals", "imem";
856                         clocks = <&clk_s_c0_flexgen CLK_FDMA>,
857                                 <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
858                                 <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
859                                 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
861                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
862                         dma-channels = <16>;
863                         #dma-cells = <3>;
865                         status = "disabled";
866                 };
868                 /* fdma free running */
869                 fdma2: dma-controller@8e60000 {
870                         compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
871                         reg = <0x8e60000 0x8000>,
872                               <0x8e70000 0x3000>,
873                               <0x8e77000 0x1000>,
874                               <0x8e78000 0x8000>;
875                         reg-names = "slimcore", "dmem", "peripherals", "imem";
876                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
877                         dma-channels = <16>;
878                         #dma-cells = <3>;
879                         clocks = <&clk_s_c0_flexgen CLK_FDMA>,
880                                 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
881                                 <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
882                                 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
884                         status = "disabled";
885                 };
887                 sti_uni_player0: sti-uni-player@8d80000 {
888                         compatible = "st,stih407-uni-player-hdmi";
889                         #sound-dai-cells = <0>;
890                         st,syscfg = <&syscfg_core>;
891                         clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
892                         assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
893                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
894                         assigned-clock-rates = <50000000>;
895                         reg = <0x8d80000 0x158>;
896                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
897                         dmas = <&fdma0 2 0 1>;
898                         dma-names = "tx";
900                         status          = "disabled";
901                 };
903                 sti_uni_player1: sti-uni-player@8d81000 {
904                         compatible = "st,stih407-uni-player-pcm-out";
905                         #sound-dai-cells = <0>;
906                         st,syscfg = <&syscfg_core>;
907                         clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
908                         assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
909                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
910                         assigned-clock-rates = <50000000>;
911                         reg = <0x8d81000 0x158>;
912                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
913                         dmas = <&fdma0 3 0 1>;
914                         dma-names = "tx";
916                         status = "disabled";
917                 };
919                 sti_uni_player2: sti-uni-player@8d82000 {
920                         compatible = "st,stih407-uni-player-dac";
921                         #sound-dai-cells = <0>;
922                         st,syscfg = <&syscfg_core>;
923                         clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
924                         assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
925                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
926                         assigned-clock-rates = <50000000>;
927                         reg = <0x8d82000 0x158>;
928                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
929                         dmas = <&fdma0 4 0 1>;
930                         dma-names = "tx";
932                         status = "disabled";
933                 };
935                 sti_uni_player3: sti-uni-player@8d85000 {
936                         compatible = "st,stih407-uni-player-spdif";
937                         #sound-dai-cells = <0>;
938                         st,syscfg = <&syscfg_core>;
939                         clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
940                         assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
941                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
942                         assigned-clock-rates = <50000000>;
943                         reg = <0x8d85000 0x158>;
944                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
945                         dmas = <&fdma0 7 0 1>;
946                         dma-names = "tx";
948                         status = "disabled";
949                 };
951                 sti_uni_reader0: sti-uni-reader@8d83000 {
952                         compatible = "st,stih407-uni-reader-pcm_in";
953                         #sound-dai-cells = <0>;
954                         st,syscfg = <&syscfg_core>;
955                         reg = <0x8d83000 0x158>;
956                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
957                         dmas = <&fdma0 5 0 1>;
958                         dma-names = "rx";
960                         status = "disabled";
961                 };
963                 sti_uni_reader1: sti-uni-reader@8d84000 {
964                         compatible = "st,stih407-uni-reader-hdmi";
965                         #sound-dai-cells = <0>;
966                         st,syscfg = <&syscfg_core>;
967                         reg = <0x8d84000 0x158>;
968                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
969                         dmas = <&fdma0 6 0 1>;
970                         dma-names = "rx";
972                         status = "disabled";
973                 };
975                 delta0@0 {
976                         compatible = "st,st-delta";
977                         reg = <0 0>;
978                         clock-names = "delta",
979                                       "delta-st231",
980                                       "delta-flash-promip";
981                         clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
982                                  <&clk_s_c0_flexgen CLK_ST231_DMU>,
983                                  <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
984                 };
985         };