1 /* SPDX-License-Identifier: GPL-2.0 */
3 * Copyright (c) 2008 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
6 * S3C24XX - Memory map definitions
9 #ifndef __ASM_PLAT_MAP_S3C_H
10 #define __ASM_PLAT_MAP_S3C_H __FILE__
14 #define S3C24XX_VA_IRQ S3C_VA_IRQ
15 #define S3C24XX_VA_MEMCTRL S3C_VA_MEM
16 #define S3C24XX_VA_UART S3C_VA_UART
18 #define S3C24XX_VA_TIMER S3C_VA_TIMER
19 #define S3C24XX_VA_CLKPWR S3C_VA_SYS
20 #define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
22 #define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
23 #define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000)
25 #define S3C2410_PA_UART (0x50000000)
26 #define S3C24XX_PA_UART S3C2410_PA_UART
31 * the calculation for the VA of this must ensure that
32 * it is the same distance apart from the UART in the
33 * phsyical address space, as the initial mapping for the IO
34 * is done as a 1:1 mapping. This puts it (currently) at
35 * 0xFA800000, which is not in the way of any current mapping
39 #define S3C2410_PA_GPIO (0x56000000)
40 #define S3C24XX_PA_GPIO S3C2410_PA_GPIO
42 #define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
43 #define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
45 #define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
46 #define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
48 #define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
50 #define S3C2410_ADDR(x) S3C_ADDR(x)
52 /* deal with the registers that move under the 2412/2413 */
54 #if defined(CONFIG_CPU_S3C2412)
56 extern void __iomem
*s3c24xx_va_gpio2
;
58 #ifdef CONFIG_CPU_S3C2412_ONLY
59 #define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
61 #define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
64 #define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
65 #define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
70 #endif /* __ASM_PLAT_MAP_S3C_H */