arch/mips/bcm47xx/setup.c

   1 /*
   2  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
   3  *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
   4  *  Copyright (C) 2006 Michael Buesch <m@bues.ch>
   5  *  Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
   6  *  Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
   7  *
   8  *  This program is free software; you can redistribute  it and/or modify it
   9  *  under  the terms of  the GNU General  Public License as published by the
  10  *  Free Software Foundation;  either version 2 of the  License, or (at your
  11  *  option) any later version.
  12  *
  13  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  14  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  15  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  16  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  17  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  18  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  19  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  20  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  21  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  22  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  23  *
  24  *  You should have received a copy of the  GNU General Public License along
  25  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  26  *  675 Mass Ave, Cambridge, MA 02139, USA.
  27  */
  28
  29 #include "bcm47xx_private.h"
  30
  31 #include <linux/bcm47xx_sprom.h>
  32 #include <linux/export.h>
  33 #include <linux/types.h>
  34 #include <linux/ethtool.h>
  35 #include <linux/phy.h>
  36 #include <linux/phy_fixed.h>
  37 #include <linux/ssb/ssb.h>
  38 #include <linux/ssb/ssb_embedded.h>
  39 #include <linux/bcma/bcma_soc.h>
  40 #include <asm/bootinfo.h>
  41 #include <asm/idle.h>
  42 #include <asm/prom.h>
  43 #include <asm/reboot.h>
  44 #include <asm/time.h>
  45 #include <bcm47xx.h>
  46 #include <bcm47xx_board.h>
  47
  48 union bcm47xx_bus bcm47xx_bus;
  49 EXPORT_SYMBOL(bcm47xx_bus);
  50
  51 enum bcm47xx_bus_type bcm47xx_bus_type;
  52 EXPORT_SYMBOL(bcm47xx_bus_type);
  53
  54 static void bcm47xx_machine_restart(char *command)
  55 {
  56         pr_alert("Please stand by while rebooting the system...\n");
  57         local_irq_disable();
  58         /* Set the watchdog timer to reset immediately */
  59         switch (bcm47xx_bus_type) {
  60 #ifdef CONFIG_BCM47XX_SSB
  61         case BCM47XX_BUS_TYPE_SSB:
  62                 if (bcm47xx_bus.ssb.chip_id == 0x4785)
  63                         write_c0_diag4(1 << 22);
  64                 ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
  65                 if (bcm47xx_bus.ssb.chip_id == 0x4785) {
  66                         __asm__ __volatile__(
  67                                 ".set\tmips3\n\t"
  68                                 "sync\n\t"
  69                                 "wait\n\t"
  70                                 ".set\tmips0");
  71                 }
  72                 break;
  73 #endif
  74 #ifdef CONFIG_BCM47XX_BCMA
  75         case BCM47XX_BUS_TYPE_BCMA:
  76                 bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
  77                 break;
  78 #endif
  79         }
  80         while (1)
  81                 cpu_relax();
  82 }
  83
  84 static void bcm47xx_machine_halt(void)
  85 {
  86         /* Disable interrupts and watchdog and spin forever */
  87         local_irq_disable();
  88         switch (bcm47xx_bus_type) {
  89 #ifdef CONFIG_BCM47XX_SSB
  90         case BCM47XX_BUS_TYPE_SSB:
  91                 ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
  92                 break;
  93 #endif
  94 #ifdef CONFIG_BCM47XX_BCMA
  95         case BCM47XX_BUS_TYPE_BCMA:
  96                 bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
  97                 break;
  98 #endif
  99         }
 100         while (1)
 101                 cpu_relax();
 102 }
 103
 104 #ifdef CONFIG_BCM47XX_SSB
 105 static void __init bcm47xx_register_ssb(void)
 106 {
 107         int err;
 108         char buf[100];
 109         struct ssb_mipscore *mcore;
 110
 111         err = ssb_bus_host_soc_register(&bcm47xx_bus.ssb, SSB_ENUM_BASE);
 112         if (err)
 113                 panic("Failed to initialize SSB bus (err %d)", err);
 114
 115         mcore = &bcm47xx_bus.ssb.mipscore;
 116         if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
 117                 if (strstr(buf, "console=ttyS1")) {
 118                         struct ssb_serial_port port;
 119
 120                         pr_debug("Swapping serial ports!\n");
 121                         /* swap serial ports */
 122                         memcpy(&port, &mcore->serial_ports[0], sizeof(port));
 123                         memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
 124                                sizeof(port));
 125                         memcpy(&mcore->serial_ports[1], &port, sizeof(port));
 126                 }
 127         }
 128 }
 129 #endif
 130
 131 #ifdef CONFIG_BCM47XX_BCMA
 132 static void __init bcm47xx_register_bcma(void)
 133 {
 134         int err;
 135
 136         err = bcma_host_soc_register(&bcm47xx_bus.bcma);
 137         if (err)
 138                 panic("Failed to register BCMA bus (err %d)", err);
 139 }
 140 #endif
 141
 142 /*
 143  * Memory setup is done in the early part of MIPS's arch_mem_init. It's supposed
 144  * to detect memory and record it with memblock_add.
 145  * Any extra initializaion performed here must not use kmalloc or bootmem.
 146  */
 147 void __init plat_mem_setup(void)
 148 {
 149         struct cpuinfo_mips *c = &current_cpu_data;
 150
 151         if (c->cputype == CPU_74K) {
 152                 pr_info("Using bcma bus\n");
 153 #ifdef CONFIG_BCM47XX_BCMA
 154                 bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
 155                 bcm47xx_register_bcma();
 156                 bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
 157 #ifdef CONFIG_HIGHMEM
 158                 bcm47xx_prom_highmem_init();
 159 #endif
 160 #endif
 161         } else {
 162                 pr_info("Using ssb bus\n");
 163 #ifdef CONFIG_BCM47XX_SSB
 164                 bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
 165                 bcm47xx_sprom_register_fallbacks();
 166                 bcm47xx_register_ssb();
 167                 bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id);
 168 #endif
 169         }
 170
 171         _machine_restart = bcm47xx_machine_restart;
 172         _machine_halt = bcm47xx_machine_halt;
 173         pm_power_off = bcm47xx_machine_halt;
 174 }
 175
 176 #ifdef CONFIG_BCM47XX_BCMA
 177 static struct device * __init bcm47xx_setup_device(void)
 178 {
 179         struct device *dev;
 180         int err;
 181
 182         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 183         if (!dev)
 184                 return NULL;
 185
 186         err = dev_set_name(dev, "bcm47xx_soc");
 187         if (err) {
 188                 pr_err("Failed to set SoC device name: %d\n", err);
 189                 kfree(dev);
 190                 return NULL;
 191         }
 192
 193         err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
 194         if (err)
 195                 pr_err("Failed to set SoC DMA mask: %d\n", err);
 196
 197         return dev;
 198 }
 199 #endif
 200
 201 /*
 202  * This finishes bus initialization doing things that were not possible without
 203  * kmalloc. Make sure to call it late enough (after mm_init).
 204  */
 205 void __init bcm47xx_bus_setup(void)
 206 {
 207 #ifdef CONFIG_BCM47XX_BCMA
 208         if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
 209                 int err;
 210
 211                 bcm47xx_bus.bcma.dev = bcm47xx_setup_device();
 212                 if (!bcm47xx_bus.bcma.dev)
 213                         panic("Failed to setup SoC device\n");
 214
 215                 err = bcma_host_soc_init(&bcm47xx_bus.bcma);
 216                 if (err)
 217                         panic("Failed to initialize BCMA bus (err %d)", err);
 218         }
 219 #endif
 220
 221         /* With bus initialized we can access NVRAM and detect the board */
 222         bcm47xx_board_detect();
 223         mips_set_machine_name(bcm47xx_board_get_name());
 224 }
 225
 226 static int __init bcm47xx_cpu_fixes(void)
 227 {
 228         switch (bcm47xx_bus_type) {
 229 #ifdef CONFIG_BCM47XX_SSB
 230         case BCM47XX_BUS_TYPE_SSB:
 231                 /* Nothing to do */
 232                 break;
 233 #endif
 234 #ifdef CONFIG_BCM47XX_BCMA
 235         case BCM47XX_BUS_TYPE_BCMA:
 236                 /* The BCM4706 has a problem with the CPU wait instruction.
 237                  * When r4k_wait or r4k_wait_irqoff is used will just hang and
 238                  * not return from a msleep(). Removing the cpu_wait
 239                  * functionality is a workaround for this problem. The BCM4716
 240                  * does not have this problem.
 241                  */
 242                 if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
 243                         cpu_wait = NULL;
 244                 break;
 245 #endif
 246         }
 247         return 0;
 248 }
 249 arch_initcall(bcm47xx_cpu_fixes);
 250
 251 static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = {
 252         .link   = 1,
 253         .speed  = SPEED_100,
 254         .duplex = DUPLEX_FULL,
 255 };
 256
 257 static int __init bcm47xx_register_bus_complete(void)
 258 {
 259         switch (bcm47xx_bus_type) {
 260 #ifdef CONFIG_BCM47XX_SSB
 261         case BCM47XX_BUS_TYPE_SSB:
 262                 /* Nothing to do */
 263                 break;
 264 #endif
 265 #ifdef CONFIG_BCM47XX_BCMA
 266         case BCM47XX_BUS_TYPE_BCMA:
 267                 if (device_register(bcm47xx_bus.bcma.dev))
 268                         pr_err("Failed to register SoC device\n");
 269                 bcma_bus_register(&bcm47xx_bus.bcma.bus);
 270                 break;
 271 #endif
 272         }
 273         bcm47xx_buttons_register();
 274         bcm47xx_leds_register();
 275         bcm47xx_workarounds();
 276
 277         fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
 278         return 0;
 279 }
 280 device_initcall(bcm47xx_register_bus_complete);