PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / edac / i82443bxgx_edac.c
blobd730e276d1a8437526f168e83f503c1d5c236473
1 /*
2 * Intel 82443BX/GX (440BX/GX chipset) Memory Controller EDAC kernel
3 * module (C) 2006 Tim Small
5 * This file may be distributed under the terms of the GNU General
6 * Public License.
8 * Written by Tim Small <tim@buttersideup.com>, based on work by Linux
9 * Networx, Thayne Harbaugh, Dan Hollis <goemon at anime dot net> and
10 * others.
12 * 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>.
14 * Written with reference to 82443BX Host Bridge Datasheet:
15 * http://download.intel.com/design/chipsets/datashts/29063301.pdf
16 * references to this document given in [].
18 * This module doesn't support the 440LX, but it may be possible to
19 * make it do so (the 440LX's register definitions are different, but
20 * not completely so - I haven't studied them in enough detail to know
21 * how easy this would be).
24 #include <linux/module.h>
25 #include <linux/init.h>
27 #include <linux/pci.h>
28 #include <linux/pci_ids.h>
31 #include <linux/edac.h>
32 #include "edac_core.h"
34 #define I82443_REVISION "0.1"
36 #define EDAC_MOD_STR "i82443bxgx_edac"
38 /* The 82443BX supports SDRAM, or EDO (EDO for mobile only), "Memory
39 * Size: 8 MB to 512 MB (1GB with Registered DIMMs) with eight memory
40 * rows" "The 82443BX supports multiple-bit error detection and
41 * single-bit error correction when ECC mode is enabled and
42 * single/multi-bit error detection when correction is disabled.
43 * During writes to the DRAM, the 82443BX generates ECC for the data
44 * on a QWord basis. Partial QWord writes require a read-modify-write
45 * cycle when ECC is enabled."
48 /* "Additionally, the 82443BX ensures that the data is corrected in
49 * main memory so that accumulation of errors is prevented. Another
50 * error within the same QWord would result in a double-bit error
51 * which is unrecoverable. This is known as hardware scrubbing since
52 * it requires no software intervention to correct the data in memory."
55 /* [Also see page 100 (section 4.3), "DRAM Interface"]
56 * [Also see page 112 (section 4.6.1.4), ECC]
59 #define I82443BXGX_NR_CSROWS 8
60 #define I82443BXGX_NR_CHANS 1
61 #define I82443BXGX_NR_DIMMS 4
63 /* 82443 PCI Device 0 */
64 #define I82443BXGX_NBXCFG 0x50 /* 32bit register starting at this PCI
65 * config space offset */
66 #define I82443BXGX_NBXCFG_OFFSET_NON_ECCROW 24 /* Array of bits, zero if
67 * row is non-ECC */
68 #define I82443BXGX_NBXCFG_OFFSET_DRAM_FREQ 12 /* 2 bits,00=100MHz,10=66 MHz */
70 #define I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY 7 /* 2 bits: */
71 #define I82443BXGX_NBXCFG_INTEGRITY_NONE 0x0 /* 00 = Non-ECC */
72 #define I82443BXGX_NBXCFG_INTEGRITY_EC 0x1 /* 01 = EC (only) */
73 #define I82443BXGX_NBXCFG_INTEGRITY_ECC 0x2 /* 10 = ECC */
74 #define I82443BXGX_NBXCFG_INTEGRITY_SCRUB 0x3 /* 11 = ECC + HW Scrub */
76 #define I82443BXGX_NBXCFG_OFFSET_ECC_DIAG_ENABLE 6
78 /* 82443 PCI Device 0 */
79 #define I82443BXGX_EAP 0x80 /* 32bit register starting at this PCI
80 * config space offset, Error Address
81 * Pointer Register */
82 #define I82443BXGX_EAP_OFFSET_EAP 12 /* High 20 bits of error address */
83 #define I82443BXGX_EAP_OFFSET_MBE BIT(1) /* Err at EAP was multi-bit (W1TC) */
84 #define I82443BXGX_EAP_OFFSET_SBE BIT(0) /* Err at EAP was single-bit (W1TC) */
86 #define I82443BXGX_ERRCMD 0x90 /* 8bit register starting at this PCI
87 * config space offset. */
88 #define I82443BXGX_ERRCMD_OFFSET_SERR_ON_MBE BIT(1) /* 1 = enable */
89 #define I82443BXGX_ERRCMD_OFFSET_SERR_ON_SBE BIT(0) /* 1 = enable */
91 #define I82443BXGX_ERRSTS 0x91 /* 16bit register starting at this PCI
92 * config space offset. */
93 #define I82443BXGX_ERRSTS_OFFSET_MBFRE 5 /* 3 bits - first err row multibit */
94 #define I82443BXGX_ERRSTS_OFFSET_MEF BIT(4) /* 1 = MBE occurred */
95 #define I82443BXGX_ERRSTS_OFFSET_SBFRE 1 /* 3 bits - first err row singlebit */
96 #define I82443BXGX_ERRSTS_OFFSET_SEF BIT(0) /* 1 = SBE occurred */
98 #define I82443BXGX_DRAMC 0x57 /* 8bit register starting at this PCI
99 * config space offset. */
100 #define I82443BXGX_DRAMC_OFFSET_DT 3 /* 2 bits, DRAM Type */
101 #define I82443BXGX_DRAMC_DRAM_IS_EDO 0 /* 00 = EDO */
102 #define I82443BXGX_DRAMC_DRAM_IS_SDRAM 1 /* 01 = SDRAM */
103 #define I82443BXGX_DRAMC_DRAM_IS_RSDRAM 2 /* 10 = Registered SDRAM */
105 #define I82443BXGX_DRB 0x60 /* 8x 8bit registers starting at this PCI
106 * config space offset. */
108 /* FIXME - don't poll when ECC disabled? */
110 struct i82443bxgx_edacmc_error_info {
111 u32 eap;
114 static struct edac_pci_ctl_info *i82443bxgx_pci;
116 static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has
117 * already registered driver
120 static int i82443bxgx_registered = 1;
122 static void i82443bxgx_edacmc_get_error_info(struct mem_ctl_info *mci,
123 struct i82443bxgx_edacmc_error_info
124 *info)
126 struct pci_dev *pdev;
127 pdev = to_pci_dev(mci->pdev);
128 pci_read_config_dword(pdev, I82443BXGX_EAP, &info->eap);
129 if (info->eap & I82443BXGX_EAP_OFFSET_SBE)
130 /* Clear error to allow next error to be reported [p.61] */
131 pci_write_bits32(pdev, I82443BXGX_EAP,
132 I82443BXGX_EAP_OFFSET_SBE,
133 I82443BXGX_EAP_OFFSET_SBE);
135 if (info->eap & I82443BXGX_EAP_OFFSET_MBE)
136 /* Clear error to allow next error to be reported [p.61] */
137 pci_write_bits32(pdev, I82443BXGX_EAP,
138 I82443BXGX_EAP_OFFSET_MBE,
139 I82443BXGX_EAP_OFFSET_MBE);
142 static int i82443bxgx_edacmc_process_error_info(struct mem_ctl_info *mci,
143 struct
144 i82443bxgx_edacmc_error_info
145 *info, int handle_errors)
147 int error_found = 0;
148 u32 eapaddr, page, pageoffset;
150 /* bits 30:12 hold the 4kb block in which the error occurred
151 * [p.61] */
152 eapaddr = (info->eap & 0xfffff000);
153 page = eapaddr >> PAGE_SHIFT;
154 pageoffset = eapaddr - (page << PAGE_SHIFT);
156 if (info->eap & I82443BXGX_EAP_OFFSET_SBE) {
157 error_found = 1;
158 if (handle_errors)
159 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
160 page, pageoffset, 0,
161 edac_mc_find_csrow_by_page(mci, page),
162 0, -1, mci->ctl_name, "");
165 if (info->eap & I82443BXGX_EAP_OFFSET_MBE) {
166 error_found = 1;
167 if (handle_errors)
168 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
169 page, pageoffset, 0,
170 edac_mc_find_csrow_by_page(mci, page),
171 0, -1, mci->ctl_name, "");
174 return error_found;
177 static void i82443bxgx_edacmc_check(struct mem_ctl_info *mci)
179 struct i82443bxgx_edacmc_error_info info;
181 edac_dbg(1, "MC%d\n", mci->mc_idx);
182 i82443bxgx_edacmc_get_error_info(mci, &info);
183 i82443bxgx_edacmc_process_error_info(mci, &info, 1);
186 static void i82443bxgx_init_csrows(struct mem_ctl_info *mci,
187 struct pci_dev *pdev,
188 enum edac_type edac_mode,
189 enum mem_type mtype)
191 struct csrow_info *csrow;
192 struct dimm_info *dimm;
193 int index;
194 u8 drbar, dramc;
195 u32 row_base, row_high_limit, row_high_limit_last;
197 pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc);
198 row_high_limit_last = 0;
199 for (index = 0; index < mci->nr_csrows; index++) {
200 csrow = mci->csrows[index];
201 dimm = csrow->channels[0]->dimm;
203 pci_read_config_byte(pdev, I82443BXGX_DRB + index, &drbar);
204 edac_dbg(1, "MC%d: Row=%d DRB = %#0x\n",
205 mci->mc_idx, index, drbar);
206 row_high_limit = ((u32) drbar << 23);
207 /* find the DRAM Chip Select Base address and mask */
208 edac_dbg(1, "MC%d: Row=%d, Boundary Address=%#0x, Last = %#0x\n",
209 mci->mc_idx, index, row_high_limit,
210 row_high_limit_last);
212 /* 440GX goes to 2GB, represented with a DRB of 0. */
213 if (row_high_limit_last && !row_high_limit)
214 row_high_limit = 1UL << 31;
216 /* This row is empty [p.49] */
217 if (row_high_limit == row_high_limit_last)
218 continue;
219 row_base = row_high_limit_last;
220 csrow->first_page = row_base >> PAGE_SHIFT;
221 csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
222 dimm->nr_pages = csrow->last_page - csrow->first_page + 1;
223 /* EAP reports in 4kilobyte granularity [61] */
224 dimm->grain = 1 << 12;
225 dimm->mtype = mtype;
226 /* I don't think 440BX can tell you device type? FIXME? */
227 dimm->dtype = DEV_UNKNOWN;
228 /* Mode is global to all rows on 440BX */
229 dimm->edac_mode = edac_mode;
230 row_high_limit_last = row_high_limit;
234 static int i82443bxgx_edacmc_probe1(struct pci_dev *pdev, int dev_idx)
236 struct mem_ctl_info *mci;
237 struct edac_mc_layer layers[2];
238 u8 dramc;
239 u32 nbxcfg, ecc_mode;
240 enum mem_type mtype;
241 enum edac_type edac_mode;
243 edac_dbg(0, "MC:\n");
245 /* Something is really hosed if PCI config space reads from
246 * the MC aren't working.
248 if (pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg))
249 return -EIO;
251 layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
252 layers[0].size = I82443BXGX_NR_CSROWS;
253 layers[0].is_virt_csrow = true;
254 layers[1].type = EDAC_MC_LAYER_CHANNEL;
255 layers[1].size = I82443BXGX_NR_CHANS;
256 layers[1].is_virt_csrow = false;
257 mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
258 if (mci == NULL)
259 return -ENOMEM;
261 edac_dbg(0, "MC: mci = %p\n", mci);
262 mci->pdev = &pdev->dev;
263 mci->mtype_cap = MEM_FLAG_EDO | MEM_FLAG_SDR | MEM_FLAG_RDR;
264 mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
265 pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc);
266 switch ((dramc >> I82443BXGX_DRAMC_OFFSET_DT) & (BIT(0) | BIT(1))) {
267 case I82443BXGX_DRAMC_DRAM_IS_EDO:
268 mtype = MEM_EDO;
269 break;
270 case I82443BXGX_DRAMC_DRAM_IS_SDRAM:
271 mtype = MEM_SDR;
272 break;
273 case I82443BXGX_DRAMC_DRAM_IS_RSDRAM:
274 mtype = MEM_RDR;
275 break;
276 default:
277 edac_dbg(0, "Unknown/reserved DRAM type value in DRAMC register!\n");
278 mtype = -MEM_UNKNOWN;
281 if ((mtype == MEM_SDR) || (mtype == MEM_RDR))
282 mci->edac_cap = mci->edac_ctl_cap;
283 else
284 mci->edac_cap = EDAC_FLAG_NONE;
286 mci->scrub_cap = SCRUB_FLAG_HW_SRC;
287 pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg);
288 ecc_mode = ((nbxcfg >> I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY) &
289 (BIT(0) | BIT(1)));
291 mci->scrub_mode = (ecc_mode == I82443BXGX_NBXCFG_INTEGRITY_SCRUB)
292 ? SCRUB_HW_SRC : SCRUB_NONE;
294 switch (ecc_mode) {
295 case I82443BXGX_NBXCFG_INTEGRITY_NONE:
296 edac_mode = EDAC_NONE;
297 break;
298 case I82443BXGX_NBXCFG_INTEGRITY_EC:
299 edac_mode = EDAC_EC;
300 break;
301 case I82443BXGX_NBXCFG_INTEGRITY_ECC:
302 case I82443BXGX_NBXCFG_INTEGRITY_SCRUB:
303 edac_mode = EDAC_SECDED;
304 break;
305 default:
306 edac_dbg(0, "Unknown/reserved ECC state in NBXCFG register!\n");
307 edac_mode = EDAC_UNKNOWN;
308 break;
311 i82443bxgx_init_csrows(mci, pdev, edac_mode, mtype);
313 /* Many BIOSes don't clear error flags on boot, so do this
314 * here, or we get "phantom" errors occurring at module-load
315 * time. */
316 pci_write_bits32(pdev, I82443BXGX_EAP,
317 (I82443BXGX_EAP_OFFSET_SBE |
318 I82443BXGX_EAP_OFFSET_MBE),
319 (I82443BXGX_EAP_OFFSET_SBE |
320 I82443BXGX_EAP_OFFSET_MBE));
322 mci->mod_name = EDAC_MOD_STR;
323 mci->mod_ver = I82443_REVISION;
324 mci->ctl_name = "I82443BXGX";
325 mci->dev_name = pci_name(pdev);
326 mci->edac_check = i82443bxgx_edacmc_check;
327 mci->ctl_page_to_phys = NULL;
329 if (edac_mc_add_mc(mci)) {
330 edac_dbg(3, "failed edac_mc_add_mc()\n");
331 goto fail;
334 /* allocating generic PCI control info */
335 i82443bxgx_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
336 if (!i82443bxgx_pci) {
337 printk(KERN_WARNING
338 "%s(): Unable to create PCI control\n",
339 __func__);
340 printk(KERN_WARNING
341 "%s(): PCI error report via EDAC not setup\n",
342 __func__);
345 edac_dbg(3, "MC: success\n");
346 return 0;
348 fail:
349 edac_mc_free(mci);
350 return -ENODEV;
353 EXPORT_SYMBOL_GPL(i82443bxgx_edacmc_probe1);
355 /* returns count (>= 0), or negative on error */
356 static int i82443bxgx_edacmc_init_one(struct pci_dev *pdev,
357 const struct pci_device_id *ent)
359 int rc;
361 edac_dbg(0, "MC:\n");
363 /* don't need to call pci_enable_device() */
364 rc = i82443bxgx_edacmc_probe1(pdev, ent->driver_data);
366 if (mci_pdev == NULL)
367 mci_pdev = pci_dev_get(pdev);
369 return rc;
372 static void i82443bxgx_edacmc_remove_one(struct pci_dev *pdev)
374 struct mem_ctl_info *mci;
376 edac_dbg(0, "\n");
378 if (i82443bxgx_pci)
379 edac_pci_release_generic_ctl(i82443bxgx_pci);
381 if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
382 return;
384 edac_mc_free(mci);
387 EXPORT_SYMBOL_GPL(i82443bxgx_edacmc_remove_one);
389 static const struct pci_device_id i82443bxgx_pci_tbl[] = {
390 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0)},
391 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2)},
392 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0)},
393 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2)},
394 {0,} /* 0 terminated list. */
397 MODULE_DEVICE_TABLE(pci, i82443bxgx_pci_tbl);
399 static struct pci_driver i82443bxgx_edacmc_driver = {
400 .name = EDAC_MOD_STR,
401 .probe = i82443bxgx_edacmc_init_one,
402 .remove = i82443bxgx_edacmc_remove_one,
403 .id_table = i82443bxgx_pci_tbl,
406 static int __init i82443bxgx_edacmc_init(void)
408 int pci_rc;
409 /* Ensure that the OPSTATE is set correctly for POLL or NMI */
410 opstate_init();
412 pci_rc = pci_register_driver(&i82443bxgx_edacmc_driver);
413 if (pci_rc < 0)
414 goto fail0;
416 if (mci_pdev == NULL) {
417 const struct pci_device_id *id = &i82443bxgx_pci_tbl[0];
418 int i = 0;
419 i82443bxgx_registered = 0;
421 while (mci_pdev == NULL && id->vendor != 0) {
422 mci_pdev = pci_get_device(id->vendor,
423 id->device, NULL);
424 i++;
425 id = &i82443bxgx_pci_tbl[i];
427 if (!mci_pdev) {
428 edac_dbg(0, "i82443bxgx pci_get_device fail\n");
429 pci_rc = -ENODEV;
430 goto fail1;
433 pci_rc = i82443bxgx_edacmc_init_one(mci_pdev, i82443bxgx_pci_tbl);
435 if (pci_rc < 0) {
436 edac_dbg(0, "i82443bxgx init fail\n");
437 pci_rc = -ENODEV;
438 goto fail1;
442 return 0;
444 fail1:
445 pci_unregister_driver(&i82443bxgx_edacmc_driver);
447 fail0:
448 if (mci_pdev != NULL)
449 pci_dev_put(mci_pdev);
451 return pci_rc;
454 static void __exit i82443bxgx_edacmc_exit(void)
456 pci_unregister_driver(&i82443bxgx_edacmc_driver);
458 if (!i82443bxgx_registered)
459 i82443bxgx_edacmc_remove_one(mci_pdev);
461 if (mci_pdev)
462 pci_dev_put(mci_pdev);
465 module_init(i82443bxgx_edacmc_init);
466 module_exit(i82443bxgx_edacmc_exit);
468 MODULE_LICENSE("GPL");
469 MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD");
470 MODULE_DESCRIPTION("EDAC MC support for Intel 82443BX/GX memory controllers");
472 module_param(edac_op_state, int, 0444);
473 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");