drivers/hwmon/lineage-pem.c

   1 /*
   2  * Driver for Lineage Compact Power Line series of power entry modules.
   3  *
   4  * Copyright (C) 2010, 2011 Ericsson AB.
   5  *
   6  * Documentation:
   7  *  http://www.lineagepower.com/oem/pdf/CPLI2C.pdf
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22  */
  23
  24 #include <linux/kernel.h>
  25 #include <linux/module.h>
  26 #include <linux/init.h>
  27 #include <linux/err.h>
  28 #include <linux/slab.h>
  29 #include <linux/i2c.h>
  30 #include <linux/hwmon.h>
  31 #include <linux/hwmon-sysfs.h>
  32 #include <linux/jiffies.h>
  33
  34 /*
  35  * This driver supports various Lineage Compact Power Line DC/DC and AC/DC
  36  * converters such as CP1800, CP2000AC, CP2000DC, CP2100DC, and others.
  37  *
  38  * The devices are nominally PMBus compliant. However, most standard PMBus
  39  * commands are not supported. Specifically, all hardware monitoring and
  40  * status reporting commands are non-standard. For this reason, a standard
  41  * PMBus driver can not be used.
  42  *
  43  * All Lineage CPL devices have a built-in I2C bus master selector (PCA9541).
  44  * To ensure device access, this driver should only be used as client driver
  45  * to the pca9541 I2C master selector driver.
  46  */
  47
  48 /* Command codes */
  49 #define PEM_OPERATION           0x01
  50 #define PEM_CLEAR_INFO_FLAGS    0x03
  51 #define PEM_VOUT_COMMAND        0x21
  52 #define PEM_VOUT_OV_FAULT_LIMIT 0x40
  53 #define PEM_READ_DATA_STRING    0xd0
  54 #define PEM_READ_INPUT_STRING   0xdc
  55 #define PEM_READ_FIRMWARE_REV   0xdd
  56 #define PEM_READ_RUN_TIMER      0xde
  57 #define PEM_FAN_HI_SPEED        0xdf
  58 #define PEM_FAN_NORMAL_SPEED    0xe0
  59 #define PEM_READ_FAN_SPEED      0xe1
  60
  61 /* offsets in data string */
  62 #define PEM_DATA_STATUS_2       0
  63 #define PEM_DATA_STATUS_1       1
  64 #define PEM_DATA_ALARM_2        2
  65 #define PEM_DATA_ALARM_1        3
  66 #define PEM_DATA_VOUT_LSB       4
  67 #define PEM_DATA_VOUT_MSB       5
  68 #define PEM_DATA_CURRENT        6
  69 #define PEM_DATA_TEMP           7
  70
  71 /* Virtual entries, to report constants */
  72 #define PEM_DATA_TEMP_MAX       10
  73 #define PEM_DATA_TEMP_CRIT      11
  74
  75 /* offsets in input string */
  76 #define PEM_INPUT_VOLTAGE       0
  77 #define PEM_INPUT_POWER_LSB     1
  78 #define PEM_INPUT_POWER_MSB     2
  79
  80 /* offsets in fan data */
  81 #define PEM_FAN_ADJUSTMENT      0
  82 #define PEM_FAN_FAN1            1
  83 #define PEM_FAN_FAN2            2
  84 #define PEM_FAN_FAN3            3
  85
  86 /* Status register bits */
  87 #define STS1_OUTPUT_ON          (1 << 0)
  88 #define STS1_LEDS_FLASHING      (1 << 1)
  89 #define STS1_EXT_FAULT          (1 << 2)
  90 #define STS1_SERVICE_LED_ON     (1 << 3)
  91 #define STS1_SHUTDOWN_OCCURRED  (1 << 4)
  92 #define STS1_INT_FAULT          (1 << 5)
  93 #define STS1_ISOLATION_TEST_OK  (1 << 6)
  94
  95 #define STS2_ENABLE_PIN_HI      (1 << 0)
  96 #define STS2_DATA_OUT_RANGE     (1 << 1)
  97 #define STS2_RESTARTED_OK       (1 << 1)
  98 #define STS2_ISOLATION_TEST_FAIL (1 << 3)
  99 #define STS2_HIGH_POWER_CAP     (1 << 4)
 100 #define STS2_INVALID_INSTR      (1 << 5)
 101 #define STS2_WILL_RESTART       (1 << 6)
 102 #define STS2_PEC_ERR            (1 << 7)
 103
 104 /* Alarm register bits */
 105 #define ALRM1_VIN_OUT_LIMIT     (1 << 0)
 106 #define ALRM1_VOUT_OUT_LIMIT    (1 << 1)
 107 #define ALRM1_OV_VOLT_SHUTDOWN  (1 << 2)
 108 #define ALRM1_VIN_OVERCURRENT   (1 << 3)
 109 #define ALRM1_TEMP_WARNING      (1 << 4)
 110 #define ALRM1_TEMP_SHUTDOWN     (1 << 5)
 111 #define ALRM1_PRIMARY_FAULT     (1 << 6)
 112 #define ALRM1_POWER_LIMIT       (1 << 7)
 113
 114 #define ALRM2_5V_OUT_LIMIT      (1 << 1)
 115 #define ALRM2_TEMP_FAULT        (1 << 2)
 116 #define ALRM2_OV_LOW            (1 << 3)
 117 #define ALRM2_DCDC_TEMP_HIGH    (1 << 4)
 118 #define ALRM2_PRI_TEMP_HIGH     (1 << 5)
 119 #define ALRM2_NO_PRIMARY        (1 << 6)
 120 #define ALRM2_FAN_FAULT         (1 << 7)
 121
 122 #define FIRMWARE_REV_LEN        4
 123 #define DATA_STRING_LEN         9
 124 #define INPUT_STRING_LEN        5       /* 4 for most devices   */
 125 #define FAN_SPEED_LEN           5
 126
 127 struct pem_data {
 128         struct device *hwmon_dev;
 129
 130         struct mutex update_lock;
 131         bool valid;
 132         bool fans_supported;
 133         int input_length;
 134         unsigned long last_updated;     /* in jiffies */
 135
 136         u8 firmware_rev[FIRMWARE_REV_LEN];
 137         u8 data_string[DATA_STRING_LEN];
 138         u8 input_string[INPUT_STRING_LEN];
 139         u8 fan_speed[FAN_SPEED_LEN];
 140 };
 141
 142 static int pem_read_block(struct i2c_client *client, u8 command, u8 *data,
 143                           int data_len)
 144 {
 145         u8 block_buffer[I2C_SMBUS_BLOCK_MAX];
 146         int result;
 147
 148         result = i2c_smbus_read_block_data(client, command, block_buffer);
 149         if (unlikely(result < 0))
 150                 goto abort;
 151         if (unlikely(result == 0xff || result != data_len)) {
 152                 result = -EIO;
 153                 goto abort;
 154         }
 155         memcpy(data, block_buffer, data_len);
 156         result = 0;
 157 abort:
 158         return result;
 159 }
 160
 161 static struct pem_data *pem_update_device(struct device *dev)
 162 {
 163         struct i2c_client *client = to_i2c_client(dev);
 164         struct pem_data *data = i2c_get_clientdata(client);
 165         struct pem_data *ret = data;
 166
 167         mutex_lock(&data->update_lock);
 168
 169         if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 170                 int result;
 171
 172                 /* Read data string */
 173                 result = pem_read_block(client, PEM_READ_DATA_STRING,
 174                                         data->data_string,
 175                                         sizeof(data->data_string));
 176                 if (unlikely(result < 0)) {
 177                         ret = ERR_PTR(result);
 178                         goto abort;
 179                 }
 180
 181                 /* Read input string */
 182                 if (data->input_length) {
 183                         result = pem_read_block(client, PEM_READ_INPUT_STRING,
 184                                                 data->input_string,
 185                                                 data->input_length);
 186                         if (unlikely(result < 0)) {
 187                                 ret = ERR_PTR(result);
 188                                 goto abort;
 189                         }
 190                 }
 191
 192                 /* Read fan speeds */
 193                 if (data->fans_supported) {
 194                         result = pem_read_block(client, PEM_READ_FAN_SPEED,
 195                                                 data->fan_speed,
 196                                                 sizeof(data->fan_speed));
 197                         if (unlikely(result < 0)) {
 198                                 ret = ERR_PTR(result);
 199                                 goto abort;
 200                         }
 201                 }
 202
 203                 i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
 204
 205                 data->last_updated = jiffies;
 206                 data->valid = 1;
 207         }
 208 abort:
 209         mutex_unlock(&data->update_lock);
 210         return ret;
 211 }
 212
 213 static long pem_get_data(u8 *data, int len, int index)
 214 {
 215         long val;
 216
 217         switch (index) {
 218         case PEM_DATA_VOUT_LSB:
 219                 val = (data[index] + (data[index+1] << 8)) * 5 / 2;
 220                 break;
 221         case PEM_DATA_CURRENT:
 222                 val = data[index] * 200;
 223                 break;
 224         case PEM_DATA_TEMP:
 225                 val = data[index] * 1000;
 226                 break;
 227         case PEM_DATA_TEMP_MAX:
 228                 val = 97 * 1000;        /* 97 degrees C per datasheet */
 229                 break;
 230         case PEM_DATA_TEMP_CRIT:
 231                 val = 107 * 1000;       /* 107 degrees C per datasheet */
 232                 break;
 233         default:
 234                 WARN_ON_ONCE(1);
 235                 val = 0;
 236         }
 237         return val;
 238 }
 239
 240 static long pem_get_input(u8 *data, int len, int index)
 241 {
 242         long val;
 243
 244         switch (index) {
 245         case PEM_INPUT_VOLTAGE:
 246                 if (len == INPUT_STRING_LEN)
 247                         val = (data[index] + (data[index+1] << 8) - 75) * 1000;
 248                 else
 249                         val = (data[index] - 75) * 1000;
 250                 break;
 251         case PEM_INPUT_POWER_LSB:
 252                 if (len == INPUT_STRING_LEN)
 253                         index++;
 254                 val = (data[index] + (data[index+1] << 8)) * 1000000L;
 255                 break;
 256         default:
 257                 WARN_ON_ONCE(1);
 258                 val = 0;
 259         }
 260         return val;
 261 }
 262
 263 static long pem_get_fan(u8 *data, int len, int index)
 264 {
 265         long val;
 266
 267         switch (index) {
 268         case PEM_FAN_FAN1:
 269         case PEM_FAN_FAN2:
 270         case PEM_FAN_FAN3:
 271                 val = data[index] * 100;
 272                 break;
 273         default:
 274                 WARN_ON_ONCE(1);
 275                 val = 0;
 276         }
 277         return val;
 278 }
 279
 280 /*
 281  * Show boolean, either a fault or an alarm.
 282  * .nr points to the register, .index is the bit mask to check
 283  */
 284 static ssize_t pem_show_bool(struct device *dev,
 285                              struct device_attribute *da, char *buf)
 286 {
 287         struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da);
 288         struct pem_data *data = pem_update_device(dev);
 289         u8 status;
 290
 291         if (IS_ERR(data))
 292                 return PTR_ERR(data);
 293
 294         status = data->data_string[attr->nr] & attr->index;
 295         return snprintf(buf, PAGE_SIZE, "%d\n", !!status);
 296 }
 297
 298 static ssize_t pem_show_data(struct device *dev, struct device_attribute *da,
 299                              char *buf)
 300 {
 301         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 302         struct pem_data *data = pem_update_device(dev);
 303         long value;
 304
 305         if (IS_ERR(data))
 306                 return PTR_ERR(data);
 307
 308         value = pem_get_data(data->data_string, sizeof(data->data_string),
 309                              attr->index);
 310
 311         return snprintf(buf, PAGE_SIZE, "%ld\n", value);
 312 }
 313
 314 static ssize_t pem_show_input(struct device *dev, struct device_attribute *da,
 315                               char *buf)
 316 {
 317         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 318         struct pem_data *data = pem_update_device(dev);
 319         long value;
 320
 321         if (IS_ERR(data))
 322                 return PTR_ERR(data);
 323
 324         value = pem_get_input(data->input_string, sizeof(data->input_string),
 325                               attr->index);
 326
 327         return snprintf(buf, PAGE_SIZE, "%ld\n", value);
 328 }
 329
 330 static ssize_t pem_show_fan(struct device *dev, struct device_attribute *da,
 331                             char *buf)
 332 {
 333         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 334         struct pem_data *data = pem_update_device(dev);
 335         long value;
 336
 337         if (IS_ERR(data))
 338                 return PTR_ERR(data);
 339
 340         value = pem_get_fan(data->fan_speed, sizeof(data->fan_speed),
 341                             attr->index);
 342
 343         return snprintf(buf, PAGE_SIZE, "%ld\n", value);
 344 }
 345
 346 /* Voltages */
 347 static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, pem_show_data, NULL,
 348                           PEM_DATA_VOUT_LSB);
 349 static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, pem_show_bool, NULL,
 350                             PEM_DATA_ALARM_1, ALRM1_VOUT_OUT_LIMIT);
 351 static SENSOR_DEVICE_ATTR_2(in1_crit_alarm, S_IRUGO, pem_show_bool, NULL,
 352                             PEM_DATA_ALARM_1, ALRM1_OV_VOLT_SHUTDOWN);
 353 static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, pem_show_input, NULL,
 354                           PEM_INPUT_VOLTAGE);
 355 static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, pem_show_bool, NULL,
 356                             PEM_DATA_ALARM_1,
 357                             ALRM1_VIN_OUT_LIMIT | ALRM1_PRIMARY_FAULT);
 358
 359 /* Currents */
 360 static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, pem_show_data, NULL,
 361                           PEM_DATA_CURRENT);
 362 static SENSOR_DEVICE_ATTR_2(curr1_alarm, S_IRUGO, pem_show_bool, NULL,
 363                             PEM_DATA_ALARM_1, ALRM1_VIN_OVERCURRENT);
 364
 365 /* Power */
 366 static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, pem_show_input, NULL,
 367                           PEM_INPUT_POWER_LSB);
 368 static SENSOR_DEVICE_ATTR_2(power1_alarm, S_IRUGO, pem_show_bool, NULL,
 369                             PEM_DATA_ALARM_1, ALRM1_POWER_LIMIT);
 370
 371 /* Fans */
 372 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, pem_show_fan, NULL,
 373                           PEM_FAN_FAN1);
 374 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, pem_show_fan, NULL,
 375                           PEM_FAN_FAN2);
 376 static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, pem_show_fan, NULL,
 377                           PEM_FAN_FAN3);
 378 static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, pem_show_bool, NULL,
 379                             PEM_DATA_ALARM_2, ALRM2_FAN_FAULT);
 380
 381 /* Temperatures */
 382 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, pem_show_data, NULL,
 383                           PEM_DATA_TEMP);
 384 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, pem_show_data, NULL,
 385                           PEM_DATA_TEMP_MAX);
 386 static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, pem_show_data, NULL,
 387                           PEM_DATA_TEMP_CRIT);
 388 static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, pem_show_bool, NULL,
 389                             PEM_DATA_ALARM_1, ALRM1_TEMP_WARNING);
 390 static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, pem_show_bool, NULL,
 391                             PEM_DATA_ALARM_1, ALRM1_TEMP_SHUTDOWN);
 392 static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, pem_show_bool, NULL,
 393                             PEM_DATA_ALARM_2, ALRM2_TEMP_FAULT);
 394
 395 static struct attribute *pem_attributes[] = {
 396         &sensor_dev_attr_in1_input.dev_attr.attr,
 397         &sensor_dev_attr_in1_alarm.dev_attr.attr,
 398         &sensor_dev_attr_in1_crit_alarm.dev_attr.attr,
 399         &sensor_dev_attr_in2_alarm.dev_attr.attr,
 400
 401         &sensor_dev_attr_curr1_alarm.dev_attr.attr,
 402
 403         &sensor_dev_attr_power1_alarm.dev_attr.attr,
 404
 405         &sensor_dev_attr_fan1_alarm.dev_attr.attr,
 406
 407         &sensor_dev_attr_temp1_input.dev_attr.attr,
 408         &sensor_dev_attr_temp1_max.dev_attr.attr,
 409         &sensor_dev_attr_temp1_crit.dev_attr.attr,
 410         &sensor_dev_attr_temp1_alarm.dev_attr.attr,
 411         &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
 412         &sensor_dev_attr_temp1_fault.dev_attr.attr,
 413
 414         NULL,
 415 };
 416
 417 static const struct attribute_group pem_group = {
 418         .attrs = pem_attributes,
 419 };
 420
 421 static struct attribute *pem_input_attributes[] = {
 422         &sensor_dev_attr_in2_input.dev_attr.attr,
 423         &sensor_dev_attr_curr1_input.dev_attr.attr,
 424         &sensor_dev_attr_power1_input.dev_attr.attr,
 425         NULL
 426 };
 427
 428 static const struct attribute_group pem_input_group = {
 429         .attrs = pem_input_attributes,
 430 };
 431
 432 static struct attribute *pem_fan_attributes[] = {
 433         &sensor_dev_attr_fan1_input.dev_attr.attr,
 434         &sensor_dev_attr_fan2_input.dev_attr.attr,
 435         &sensor_dev_attr_fan3_input.dev_attr.attr,
 436         NULL
 437 };
 438
 439 static const struct attribute_group pem_fan_group = {
 440         .attrs = pem_fan_attributes,
 441 };
 442
 443 static int pem_probe(struct i2c_client *client,
 444                      const struct i2c_device_id *id)
 445 {
 446         struct i2c_adapter *adapter = client->adapter;
 447         struct pem_data *data;
 448         int ret;
 449
 450         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BLOCK_DATA
 451                                      | I2C_FUNC_SMBUS_WRITE_BYTE))
 452                 return -ENODEV;
 453
 454         data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 455         if (!data)
 456                 return -ENOMEM;
 457
 458         i2c_set_clientdata(client, data);
 459         mutex_init(&data->update_lock);
 460
 461         /*
 462          * We use the next two commands to determine if the device is really
 463          * there.
 464          */
 465         ret = pem_read_block(client, PEM_READ_FIRMWARE_REV,
 466                              data->firmware_rev, sizeof(data->firmware_rev));
 467         if (ret < 0)
 468                 return ret;
 469
 470         ret = i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
 471         if (ret < 0)
 472                 return ret;
 473
 474         dev_info(&client->dev, "Firmware revision %d.%d.%d\n",
 475                  data->firmware_rev[0], data->firmware_rev[1],
 476                  data->firmware_rev[2]);
 477
 478         /* Register sysfs hooks */
 479         ret = sysfs_create_group(&client->dev.kobj, &pem_group);
 480         if (ret)
 481                 return ret;
 482
 483         /*
 484          * Check if input readings are supported.
 485          * This is the case if we can read input data,
 486          * and if the returned data is not all zeros.
 487          * Note that input alarms are always supported.
 488          */
 489         ret = pem_read_block(client, PEM_READ_INPUT_STRING,
 490                              data->input_string,
 491                              sizeof(data->input_string) - 1);
 492         if (!ret && (data->input_string[0] || data->input_string[1] ||
 493                      data->input_string[2]))
 494                 data->input_length = sizeof(data->input_string) - 1;
 495         else if (ret < 0) {
 496                 /* Input string is one byte longer for some devices */
 497                 ret = pem_read_block(client, PEM_READ_INPUT_STRING,
 498                                     data->input_string,
 499                                     sizeof(data->input_string));
 500                 if (!ret && (data->input_string[0] || data->input_string[1] ||
 501                             data->input_string[2] || data->input_string[3]))
 502                         data->input_length = sizeof(data->input_string);
 503         }
 504         ret = 0;
 505         if (data->input_length) {
 506                 ret = sysfs_create_group(&client->dev.kobj, &pem_input_group);
 507                 if (ret)
 508                         goto out_remove_groups;
 509         }
 510
 511         /*
 512          * Check if fan speed readings are supported.
 513          * This is the case if we can read fan speed data,
 514          * and if the returned data is not all zeros.
 515          * Note that the fan alarm is always supported.
 516          */
 517         ret = pem_read_block(client, PEM_READ_FAN_SPEED,
 518                              data->fan_speed,
 519                              sizeof(data->fan_speed));
 520         if (!ret && (data->fan_speed[0] || data->fan_speed[1] ||
 521                      data->fan_speed[2] || data->fan_speed[3])) {
 522                 data->fans_supported = true;
 523                 ret = sysfs_create_group(&client->dev.kobj, &pem_fan_group);
 524                 if (ret)
 525                         goto out_remove_groups;
 526         }
 527
 528         data->hwmon_dev = hwmon_device_register(&client->dev);
 529         if (IS_ERR(data->hwmon_dev)) {
 530                 ret = PTR_ERR(data->hwmon_dev);
 531                 goto out_remove_groups;
 532         }
 533
 534         return 0;
 535
 536 out_remove_groups:
 537         sysfs_remove_group(&client->dev.kobj, &pem_input_group);
 538         sysfs_remove_group(&client->dev.kobj, &pem_fan_group);
 539         sysfs_remove_group(&client->dev.kobj, &pem_group);
 540         return ret;
 541 }
 542
 543 static int pem_remove(struct i2c_client *client)
 544 {
 545         struct pem_data *data = i2c_get_clientdata(client);
 546
 547         hwmon_device_unregister(data->hwmon_dev);
 548
 549         sysfs_remove_group(&client->dev.kobj, &pem_input_group);
 550         sysfs_remove_group(&client->dev.kobj, &pem_fan_group);
 551         sysfs_remove_group(&client->dev.kobj, &pem_group);
 552
 553         return 0;
 554 }
 555
 556 static const struct i2c_device_id pem_id[] = {
 557         {"lineage_pem", 0},
 558         {}
 559 };
 560 MODULE_DEVICE_TABLE(i2c, pem_id);
 561
 562 static struct i2c_driver pem_driver = {
 563         .driver = {
 564                    .name = "lineage_pem",
 565                    },
 566         .probe = pem_probe,
 567         .remove = pem_remove,
 568         .id_table = pem_id,
 569 };
 570
 571 module_i2c_driver(pem_driver);
 572
 573 MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
 574 MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver");
 575 MODULE_LICENSE("GPL");