PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / hwmon / tmp401.c
blob7fa6e7d0b9b6f93ea634954cd1d71d0a67b1694b
1 /* tmp401.c
3 * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
4 * Preliminary tmp411 support by:
5 * Gabriel Konat, Sander Leget, Wouter Willems
6 * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
8 * Cleanup and support for TMP431 and TMP432 by Guenter Roeck
9 * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
27 * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC.
29 * Note this IC is in some aspect similar to the LM90, but it has quite a
30 * few differences too, for example the local temp has a higher resolution
31 * and thus has 16 bits registers for its value and limit instead of 8 bits.
34 #include <linux/module.h>
35 #include <linux/init.h>
36 #include <linux/bitops.h>
37 #include <linux/slab.h>
38 #include <linux/jiffies.h>
39 #include <linux/i2c.h>
40 #include <linux/hwmon.h>
41 #include <linux/hwmon-sysfs.h>
42 #include <linux/err.h>
43 #include <linux/mutex.h>
44 #include <linux/sysfs.h>
46 /* Addresses to scan */
47 static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
49 enum chips { tmp401, tmp411, tmp431, tmp432 };
52 * The TMP401 registers, note some registers have different addresses for
53 * reading and writing
55 #define TMP401_STATUS 0x02
56 #define TMP401_CONFIG_READ 0x03
57 #define TMP401_CONFIG_WRITE 0x09
58 #define TMP401_CONVERSION_RATE_READ 0x04
59 #define TMP401_CONVERSION_RATE_WRITE 0x0A
60 #define TMP401_TEMP_CRIT_HYST 0x21
61 #define TMP401_MANUFACTURER_ID_REG 0xFE
62 #define TMP401_DEVICE_ID_REG 0xFF
64 static const u8 TMP401_TEMP_MSB_READ[6][2] = {
65 { 0x00, 0x01 }, /* temp */
66 { 0x06, 0x08 }, /* low limit */
67 { 0x05, 0x07 }, /* high limit */
68 { 0x20, 0x19 }, /* therm (crit) limit */
69 { 0x30, 0x34 }, /* lowest */
70 { 0x32, 0x36 }, /* highest */
73 static const u8 TMP401_TEMP_MSB_WRITE[6][2] = {
74 { 0, 0 }, /* temp (unused) */
75 { 0x0C, 0x0E }, /* low limit */
76 { 0x0B, 0x0D }, /* high limit */
77 { 0x20, 0x19 }, /* therm (crit) limit */
78 { 0x30, 0x34 }, /* lowest */
79 { 0x32, 0x36 }, /* highest */
82 static const u8 TMP401_TEMP_LSB[6][2] = {
83 { 0x15, 0x10 }, /* temp */
84 { 0x17, 0x14 }, /* low limit */
85 { 0x16, 0x13 }, /* high limit */
86 { 0, 0 }, /* therm (crit) limit (unused) */
87 { 0x31, 0x35 }, /* lowest */
88 { 0x33, 0x37 }, /* highest */
91 static const u8 TMP432_TEMP_MSB_READ[4][3] = {
92 { 0x00, 0x01, 0x23 }, /* temp */
93 { 0x06, 0x08, 0x16 }, /* low limit */
94 { 0x05, 0x07, 0x15 }, /* high limit */
95 { 0x20, 0x19, 0x1A }, /* therm (crit) limit */
98 static const u8 TMP432_TEMP_MSB_WRITE[4][3] = {
99 { 0, 0, 0 }, /* temp - unused */
100 { 0x0C, 0x0E, 0x16 }, /* low limit */
101 { 0x0B, 0x0D, 0x15 }, /* high limit */
102 { 0x20, 0x19, 0x1A }, /* therm (crit) limit */
105 static const u8 TMP432_TEMP_LSB[3][3] = {
106 { 0x29, 0x10, 0x24 }, /* temp */
107 { 0x3E, 0x14, 0x18 }, /* low limit */
108 { 0x3D, 0x13, 0x17 }, /* high limit */
111 /* [0] = fault, [1] = low, [2] = high, [3] = therm/crit */
112 static const u8 TMP432_STATUS_REG[] = {
113 0x1b, 0x36, 0x35, 0x37 };
115 /* Flags */
116 #define TMP401_CONFIG_RANGE BIT(2)
117 #define TMP401_CONFIG_SHUTDOWN BIT(6)
118 #define TMP401_STATUS_LOCAL_CRIT BIT(0)
119 #define TMP401_STATUS_REMOTE_CRIT BIT(1)
120 #define TMP401_STATUS_REMOTE_OPEN BIT(2)
121 #define TMP401_STATUS_REMOTE_LOW BIT(3)
122 #define TMP401_STATUS_REMOTE_HIGH BIT(4)
123 #define TMP401_STATUS_LOCAL_LOW BIT(5)
124 #define TMP401_STATUS_LOCAL_HIGH BIT(6)
126 /* On TMP432, each status has its own register */
127 #define TMP432_STATUS_LOCAL BIT(0)
128 #define TMP432_STATUS_REMOTE1 BIT(1)
129 #define TMP432_STATUS_REMOTE2 BIT(2)
131 /* Manufacturer / Device ID's */
132 #define TMP401_MANUFACTURER_ID 0x55
133 #define TMP401_DEVICE_ID 0x11
134 #define TMP411A_DEVICE_ID 0x12
135 #define TMP411B_DEVICE_ID 0x13
136 #define TMP411C_DEVICE_ID 0x10
137 #define TMP431_DEVICE_ID 0x31
138 #define TMP432_DEVICE_ID 0x32
141 * Driver data (common to all clients)
144 static const struct i2c_device_id tmp401_id[] = {
145 { "tmp401", tmp401 },
146 { "tmp411", tmp411 },
147 { "tmp431", tmp431 },
148 { "tmp432", tmp432 },
151 MODULE_DEVICE_TABLE(i2c, tmp401_id);
154 * Client data (each client gets its own)
157 struct tmp401_data {
158 struct i2c_client *client;
159 const struct attribute_group *groups[3];
160 struct mutex update_lock;
161 char valid; /* zero until following fields are valid */
162 unsigned long last_updated; /* in jiffies */
163 enum chips kind;
165 unsigned int update_interval; /* in milliseconds */
167 /* register values */
168 u8 status[4];
169 u8 config;
170 u16 temp[6][3];
171 u8 temp_crit_hyst;
175 * Sysfs attr show / store functions
178 static int tmp401_register_to_temp(u16 reg, u8 config)
180 int temp = reg;
182 if (config & TMP401_CONFIG_RANGE)
183 temp -= 64 * 256;
185 return DIV_ROUND_CLOSEST(temp * 125, 32);
188 static u16 tmp401_temp_to_register(long temp, u8 config, int zbits)
190 if (config & TMP401_CONFIG_RANGE) {
191 temp = clamp_val(temp, -64000, 191000);
192 temp += 64000;
193 } else
194 temp = clamp_val(temp, 0, 127000);
196 return DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits;
199 static int tmp401_update_device_reg16(struct i2c_client *client,
200 struct tmp401_data *data)
202 int i, j, val;
203 int num_regs = data->kind == tmp411 ? 6 : 4;
204 int num_sensors = data->kind == tmp432 ? 3 : 2;
206 for (i = 0; i < num_sensors; i++) { /* local / r1 / r2 */
207 for (j = 0; j < num_regs; j++) { /* temp / low / ... */
208 u8 regaddr;
210 * High byte must be read first immediately followed
211 * by the low byte
213 regaddr = data->kind == tmp432 ?
214 TMP432_TEMP_MSB_READ[j][i] :
215 TMP401_TEMP_MSB_READ[j][i];
216 val = i2c_smbus_read_byte_data(client, regaddr);
217 if (val < 0)
218 return val;
219 data->temp[j][i] = val << 8;
220 if (j == 3) /* crit is msb only */
221 continue;
222 regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[j][i]
223 : TMP401_TEMP_LSB[j][i];
224 val = i2c_smbus_read_byte_data(client, regaddr);
225 if (val < 0)
226 return val;
227 data->temp[j][i] |= val;
230 return 0;
233 static struct tmp401_data *tmp401_update_device(struct device *dev)
235 struct tmp401_data *data = dev_get_drvdata(dev);
236 struct i2c_client *client = data->client;
237 struct tmp401_data *ret = data;
238 int i, val;
239 unsigned long next_update;
241 mutex_lock(&data->update_lock);
243 next_update = data->last_updated +
244 msecs_to_jiffies(data->update_interval);
245 if (time_after(jiffies, next_update) || !data->valid) {
246 if (data->kind != tmp432) {
248 * The driver uses the TMP432 status format internally.
249 * Convert status to TMP432 format for other chips.
251 val = i2c_smbus_read_byte_data(client, TMP401_STATUS);
252 if (val < 0) {
253 ret = ERR_PTR(val);
254 goto abort;
256 data->status[0] =
257 (val & TMP401_STATUS_REMOTE_OPEN) >> 1;
258 data->status[1] =
259 ((val & TMP401_STATUS_REMOTE_LOW) >> 2) |
260 ((val & TMP401_STATUS_LOCAL_LOW) >> 5);
261 data->status[2] =
262 ((val & TMP401_STATUS_REMOTE_HIGH) >> 3) |
263 ((val & TMP401_STATUS_LOCAL_HIGH) >> 6);
264 data->status[3] = val & (TMP401_STATUS_LOCAL_CRIT
265 | TMP401_STATUS_REMOTE_CRIT);
266 } else {
267 for (i = 0; i < ARRAY_SIZE(data->status); i++) {
268 val = i2c_smbus_read_byte_data(client,
269 TMP432_STATUS_REG[i]);
270 if (val < 0) {
271 ret = ERR_PTR(val);
272 goto abort;
274 data->status[i] = val;
278 val = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
279 if (val < 0) {
280 ret = ERR_PTR(val);
281 goto abort;
283 data->config = val;
284 val = tmp401_update_device_reg16(client, data);
285 if (val < 0) {
286 ret = ERR_PTR(val);
287 goto abort;
289 val = i2c_smbus_read_byte_data(client, TMP401_TEMP_CRIT_HYST);
290 if (val < 0) {
291 ret = ERR_PTR(val);
292 goto abort;
294 data->temp_crit_hyst = val;
296 data->last_updated = jiffies;
297 data->valid = 1;
300 abort:
301 mutex_unlock(&data->update_lock);
302 return ret;
305 static ssize_t show_temp(struct device *dev,
306 struct device_attribute *devattr, char *buf)
308 int nr = to_sensor_dev_attr_2(devattr)->nr;
309 int index = to_sensor_dev_attr_2(devattr)->index;
310 struct tmp401_data *data = tmp401_update_device(dev);
312 if (IS_ERR(data))
313 return PTR_ERR(data);
315 return sprintf(buf, "%d\n",
316 tmp401_register_to_temp(data->temp[nr][index], data->config));
319 static ssize_t show_temp_crit_hyst(struct device *dev,
320 struct device_attribute *devattr, char *buf)
322 int temp, index = to_sensor_dev_attr(devattr)->index;
323 struct tmp401_data *data = tmp401_update_device(dev);
325 if (IS_ERR(data))
326 return PTR_ERR(data);
328 mutex_lock(&data->update_lock);
329 temp = tmp401_register_to_temp(data->temp[3][index], data->config);
330 temp -= data->temp_crit_hyst * 1000;
331 mutex_unlock(&data->update_lock);
333 return sprintf(buf, "%d\n", temp);
336 static ssize_t show_status(struct device *dev,
337 struct device_attribute *devattr, char *buf)
339 int nr = to_sensor_dev_attr_2(devattr)->nr;
340 int mask = to_sensor_dev_attr_2(devattr)->index;
341 struct tmp401_data *data = tmp401_update_device(dev);
343 if (IS_ERR(data))
344 return PTR_ERR(data);
346 return sprintf(buf, "%d\n", !!(data->status[nr] & mask));
349 static ssize_t store_temp(struct device *dev, struct device_attribute *devattr,
350 const char *buf, size_t count)
352 int nr = to_sensor_dev_attr_2(devattr)->nr;
353 int index = to_sensor_dev_attr_2(devattr)->index;
354 struct tmp401_data *data = dev_get_drvdata(dev);
355 struct i2c_client *client = data->client;
356 long val;
357 u16 reg;
358 u8 regaddr;
360 if (kstrtol(buf, 10, &val))
361 return -EINVAL;
363 reg = tmp401_temp_to_register(val, data->config, nr == 3 ? 8 : 4);
365 mutex_lock(&data->update_lock);
367 regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_WRITE[nr][index]
368 : TMP401_TEMP_MSB_WRITE[nr][index];
369 i2c_smbus_write_byte_data(client, regaddr, reg >> 8);
370 if (nr != 3) {
371 regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[nr][index]
372 : TMP401_TEMP_LSB[nr][index];
373 i2c_smbus_write_byte_data(client, regaddr, reg & 0xFF);
375 data->temp[nr][index] = reg;
377 mutex_unlock(&data->update_lock);
379 return count;
382 static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute
383 *devattr, const char *buf, size_t count)
385 int temp, index = to_sensor_dev_attr(devattr)->index;
386 struct tmp401_data *data = tmp401_update_device(dev);
387 long val;
388 u8 reg;
390 if (IS_ERR(data))
391 return PTR_ERR(data);
393 if (kstrtol(buf, 10, &val))
394 return -EINVAL;
396 if (data->config & TMP401_CONFIG_RANGE)
397 val = clamp_val(val, -64000, 191000);
398 else
399 val = clamp_val(val, 0, 127000);
401 mutex_lock(&data->update_lock);
402 temp = tmp401_register_to_temp(data->temp[3][index], data->config);
403 val = clamp_val(val, temp - 255000, temp);
404 reg = ((temp - val) + 500) / 1000;
406 i2c_smbus_write_byte_data(data->client, TMP401_TEMP_CRIT_HYST,
407 reg);
409 data->temp_crit_hyst = reg;
411 mutex_unlock(&data->update_lock);
413 return count;
417 * Resets the historical measurements of minimum and maximum temperatures.
418 * This is done by writing any value to any of the minimum/maximum registers
419 * (0x30-0x37).
421 static ssize_t reset_temp_history(struct device *dev,
422 struct device_attribute *devattr, const char *buf, size_t count)
424 struct tmp401_data *data = dev_get_drvdata(dev);
425 struct i2c_client *client = data->client;
426 long val;
428 if (kstrtol(buf, 10, &val))
429 return -EINVAL;
431 if (val != 1) {
432 dev_err(dev,
433 "temp_reset_history value %ld not supported. Use 1 to reset the history!\n",
434 val);
435 return -EINVAL;
437 mutex_lock(&data->update_lock);
438 i2c_smbus_write_byte_data(client, TMP401_TEMP_MSB_WRITE[5][0], val);
439 data->valid = 0;
440 mutex_unlock(&data->update_lock);
442 return count;
445 static ssize_t show_update_interval(struct device *dev,
446 struct device_attribute *attr, char *buf)
448 struct tmp401_data *data = dev_get_drvdata(dev);
450 return sprintf(buf, "%u\n", data->update_interval);
453 static ssize_t set_update_interval(struct device *dev,
454 struct device_attribute *attr,
455 const char *buf, size_t count)
457 struct tmp401_data *data = dev_get_drvdata(dev);
458 struct i2c_client *client = data->client;
459 unsigned long val;
460 int err, rate;
462 err = kstrtoul(buf, 10, &val);
463 if (err)
464 return err;
467 * For valid rates, interval can be calculated as
468 * interval = (1 << (7 - rate)) * 125;
469 * Rounded rate is therefore
470 * rate = 7 - __fls(interval * 4 / (125 * 3));
471 * Use clamp_val() to avoid overflows, and to ensure valid input
472 * for __fls.
474 val = clamp_val(val, 125, 16000);
475 rate = 7 - __fls(val * 4 / (125 * 3));
476 mutex_lock(&data->update_lock);
477 i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, rate);
478 data->update_interval = (1 << (7 - rate)) * 125;
479 mutex_unlock(&data->update_lock);
481 return count;
484 static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
485 static SENSOR_DEVICE_ATTR_2(temp1_min, S_IWUSR | S_IRUGO, show_temp,
486 store_temp, 1, 0);
487 static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp,
488 store_temp, 2, 0);
489 static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IWUSR | S_IRUGO, show_temp,
490 store_temp, 3, 0);
491 static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
492 show_temp_crit_hyst, store_temp_crit_hyst, 0);
493 static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO, show_status, NULL,
494 1, TMP432_STATUS_LOCAL);
495 static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO, show_status, NULL,
496 2, TMP432_STATUS_LOCAL);
497 static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, show_status, NULL,
498 3, TMP432_STATUS_LOCAL);
499 static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1);
500 static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp,
501 store_temp, 1, 1);
502 static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp,
503 store_temp, 2, 1);
504 static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IWUSR | S_IRUGO, show_temp,
505 store_temp, 3, 1);
506 static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst,
507 NULL, 1);
508 static SENSOR_DEVICE_ATTR_2(temp2_fault, S_IRUGO, show_status, NULL,
509 0, TMP432_STATUS_REMOTE1);
510 static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO, show_status, NULL,
511 1, TMP432_STATUS_REMOTE1);
512 static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO, show_status, NULL,
513 2, TMP432_STATUS_REMOTE1);
514 static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO, show_status, NULL,
515 3, TMP432_STATUS_REMOTE1);
517 static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
518 set_update_interval);
520 static struct attribute *tmp401_attributes[] = {
521 &sensor_dev_attr_temp1_input.dev_attr.attr,
522 &sensor_dev_attr_temp1_min.dev_attr.attr,
523 &sensor_dev_attr_temp1_max.dev_attr.attr,
524 &sensor_dev_attr_temp1_crit.dev_attr.attr,
525 &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
526 &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
527 &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
528 &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
530 &sensor_dev_attr_temp2_input.dev_attr.attr,
531 &sensor_dev_attr_temp2_min.dev_attr.attr,
532 &sensor_dev_attr_temp2_max.dev_attr.attr,
533 &sensor_dev_attr_temp2_crit.dev_attr.attr,
534 &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
535 &sensor_dev_attr_temp2_fault.dev_attr.attr,
536 &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
537 &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
538 &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
540 &dev_attr_update_interval.attr,
542 NULL
545 static const struct attribute_group tmp401_group = {
546 .attrs = tmp401_attributes,
550 * Additional features of the TMP411 chip.
551 * The TMP411 stores the minimum and maximum
552 * temperature measured since power-on, chip-reset, or
553 * minimum and maximum register reset for both the local
554 * and remote channels.
556 static SENSOR_DEVICE_ATTR_2(temp1_lowest, S_IRUGO, show_temp, NULL, 4, 0);
557 static SENSOR_DEVICE_ATTR_2(temp1_highest, S_IRUGO, show_temp, NULL, 5, 0);
558 static SENSOR_DEVICE_ATTR_2(temp2_lowest, S_IRUGO, show_temp, NULL, 4, 1);
559 static SENSOR_DEVICE_ATTR_2(temp2_highest, S_IRUGO, show_temp, NULL, 5, 1);
560 static SENSOR_DEVICE_ATTR(temp_reset_history, S_IWUSR, NULL, reset_temp_history,
563 static struct attribute *tmp411_attributes[] = {
564 &sensor_dev_attr_temp1_highest.dev_attr.attr,
565 &sensor_dev_attr_temp1_lowest.dev_attr.attr,
566 &sensor_dev_attr_temp2_highest.dev_attr.attr,
567 &sensor_dev_attr_temp2_lowest.dev_attr.attr,
568 &sensor_dev_attr_temp_reset_history.dev_attr.attr,
569 NULL
572 static const struct attribute_group tmp411_group = {
573 .attrs = tmp411_attributes,
576 static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2);
577 static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp,
578 store_temp, 1, 2);
579 static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp,
580 store_temp, 2, 2);
581 static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
582 store_temp, 3, 2);
583 static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst,
584 NULL, 2);
585 static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_status, NULL,
586 0, TMP432_STATUS_REMOTE2);
587 static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO, show_status, NULL,
588 1, TMP432_STATUS_REMOTE2);
589 static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO, show_status, NULL,
590 2, TMP432_STATUS_REMOTE2);
591 static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO, show_status, NULL,
592 3, TMP432_STATUS_REMOTE2);
594 static struct attribute *tmp432_attributes[] = {
595 &sensor_dev_attr_temp3_input.dev_attr.attr,
596 &sensor_dev_attr_temp3_min.dev_attr.attr,
597 &sensor_dev_attr_temp3_max.dev_attr.attr,
598 &sensor_dev_attr_temp3_crit.dev_attr.attr,
599 &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
600 &sensor_dev_attr_temp3_fault.dev_attr.attr,
601 &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
602 &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
603 &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
605 NULL
608 static const struct attribute_group tmp432_group = {
609 .attrs = tmp432_attributes,
613 * Begin non sysfs callback code (aka Real code)
616 static void tmp401_init_client(struct tmp401_data *data,
617 struct i2c_client *client)
619 int config, config_orig;
621 /* Set the conversion rate to 2 Hz */
622 i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
623 data->update_interval = 500;
625 /* Start conversions (disable shutdown if necessary) */
626 config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
627 if (config < 0) {
628 dev_warn(&client->dev, "Initialization failed!\n");
629 return;
632 config_orig = config;
633 config &= ~TMP401_CONFIG_SHUTDOWN;
635 if (config != config_orig)
636 i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
639 static int tmp401_detect(struct i2c_client *client,
640 struct i2c_board_info *info)
642 enum chips kind;
643 struct i2c_adapter *adapter = client->adapter;
644 u8 reg;
646 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
647 return -ENODEV;
649 /* Detect and identify the chip */
650 reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG);
651 if (reg != TMP401_MANUFACTURER_ID)
652 return -ENODEV;
654 reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
656 switch (reg) {
657 case TMP401_DEVICE_ID:
658 if (client->addr != 0x4c)
659 return -ENODEV;
660 kind = tmp401;
661 break;
662 case TMP411A_DEVICE_ID:
663 if (client->addr != 0x4c)
664 return -ENODEV;
665 kind = tmp411;
666 break;
667 case TMP411B_DEVICE_ID:
668 if (client->addr != 0x4d)
669 return -ENODEV;
670 kind = tmp411;
671 break;
672 case TMP411C_DEVICE_ID:
673 if (client->addr != 0x4e)
674 return -ENODEV;
675 kind = tmp411;
676 break;
677 case TMP431_DEVICE_ID:
678 if (client->addr == 0x4e)
679 return -ENODEV;
680 kind = tmp431;
681 break;
682 case TMP432_DEVICE_ID:
683 if (client->addr == 0x4e)
684 return -ENODEV;
685 kind = tmp432;
686 break;
687 default:
688 return -ENODEV;
691 reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
692 if (reg & 0x1b)
693 return -ENODEV;
695 reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ);
696 /* Datasheet says: 0x1-0x6 */
697 if (reg > 15)
698 return -ENODEV;
700 strlcpy(info->type, tmp401_id[kind].name, I2C_NAME_SIZE);
702 return 0;
705 static int tmp401_probe(struct i2c_client *client,
706 const struct i2c_device_id *id)
708 const char *names[] = { "TMP401", "TMP411", "TMP431", "TMP432" };
709 struct device *dev = &client->dev;
710 struct device *hwmon_dev;
711 struct tmp401_data *data;
712 int groups = 0;
714 data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
715 if (!data)
716 return -ENOMEM;
718 data->client = client;
719 mutex_init(&data->update_lock);
720 data->kind = id->driver_data;
722 /* Initialize the TMP401 chip */
723 tmp401_init_client(data, client);
725 /* Register sysfs hooks */
726 data->groups[groups++] = &tmp401_group;
728 /* Register additional tmp411 sysfs hooks */
729 if (data->kind == tmp411)
730 data->groups[groups++] = &tmp411_group;
732 /* Register additional tmp432 sysfs hooks */
733 if (data->kind == tmp432)
734 data->groups[groups++] = &tmp432_group;
736 hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
737 data, data->groups);
738 if (IS_ERR(hwmon_dev))
739 return PTR_ERR(hwmon_dev);
741 dev_info(dev, "Detected TI %s chip\n", names[data->kind]);
743 return 0;
746 static struct i2c_driver tmp401_driver = {
747 .class = I2C_CLASS_HWMON,
748 .driver = {
749 .name = "tmp401",
751 .probe = tmp401_probe,
752 .id_table = tmp401_id,
753 .detect = tmp401_detect,
754 .address_list = normal_i2c,
757 module_i2c_driver(tmp401_driver);
759 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
760 MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver");
761 MODULE_LICENSE("GPL");