2 * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; version 2 of the License.
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
13 * You should have received a copy of the GNU General Public License
14 * along with this program; if not, write to the Free Software
15 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
18 #include <linux/module.h>
19 #include <linux/kernel.h>
20 #include <linux/delay.h>
21 #include <linux/errno.h>
22 #include <linux/i2c.h>
25 #include <linux/types.h>
26 #include <linux/interrupt.h>
27 #include <linux/jiffies.h>
28 #include <linux/pci.h>
29 #include <linux/mutex.h>
30 #include <linux/ktime.h>
31 #include <linux/slab.h>
33 #define PCH_EVENT_SET 0 /* I2C Interrupt Event Set Status */
34 #define PCH_EVENT_NONE 1 /* I2C Interrupt Event Clear Status */
35 #define PCH_MAX_CLK 100000 /* Maximum Clock speed in MHz */
36 #define PCH_BUFFER_MODE_ENABLE 0x0002 /* flag for Buffer mode enable */
37 #define PCH_EEPROM_SW_RST_MODE_ENABLE 0x0008 /* EEPROM SW RST enable flag */
39 #define PCH_I2CSADR 0x00 /* I2C slave address register */
40 #define PCH_I2CCTL 0x04 /* I2C control register */
41 #define PCH_I2CSR 0x08 /* I2C status register */
42 #define PCH_I2CDR 0x0C /* I2C data register */
43 #define PCH_I2CMON 0x10 /* I2C bus monitor register */
44 #define PCH_I2CBC 0x14 /* I2C bus transfer rate setup counter */
45 #define PCH_I2CMOD 0x18 /* I2C mode register */
46 #define PCH_I2CBUFSLV 0x1C /* I2C buffer mode slave address register */
47 #define PCH_I2CBUFSUB 0x20 /* I2C buffer mode subaddress register */
48 #define PCH_I2CBUFFOR 0x24 /* I2C buffer mode format register */
49 #define PCH_I2CBUFCTL 0x28 /* I2C buffer mode control register */
50 #define PCH_I2CBUFMSK 0x2C /* I2C buffer mode interrupt mask register */
51 #define PCH_I2CBUFSTA 0x30 /* I2C buffer mode status register */
52 #define PCH_I2CBUFLEV 0x34 /* I2C buffer mode level register */
53 #define PCH_I2CESRFOR 0x38 /* EEPROM software reset mode format register */
54 #define PCH_I2CESRCTL 0x3C /* EEPROM software reset mode ctrl register */
55 #define PCH_I2CESRMSK 0x40 /* EEPROM software reset mode */
56 #define PCH_I2CESRSTA 0x44 /* EEPROM software reset mode status register */
57 #define PCH_I2CTMR 0x48 /* I2C timer register */
58 #define PCH_I2CSRST 0xFC /* I2C reset register */
59 #define PCH_I2CNF 0xF8 /* I2C noise filter register */
61 #define BUS_IDLE_TIMEOUT 20
62 #define PCH_I2CCTL_I2CMEN 0x0080
63 #define TEN_BIT_ADDR_DEFAULT 0xF000
64 #define TEN_BIT_ADDR_MASK 0xF0
65 #define PCH_START 0x0020
66 #define PCH_RESTART 0x0004
67 #define PCH_ESR_START 0x0001
68 #define PCH_BUFF_START 0x1
69 #define PCH_REPSTART 0x0004
70 #define PCH_ACK 0x0008
71 #define PCH_GETACK 0x0001
74 #define I2CMCF_BIT 0x0080
75 #define I2CMIF_BIT 0x0002
76 #define I2CMAL_BIT 0x0010
77 #define I2CBMFI_BIT 0x0001
78 #define I2CBMAL_BIT 0x0002
79 #define I2CBMNA_BIT 0x0004
80 #define I2CBMTO_BIT 0x0008
81 #define I2CBMIS_BIT 0x0010
82 #define I2CESRFI_BIT 0X0001
83 #define I2CESRTO_BIT 0x0002
84 #define I2CESRFIIE_BIT 0x1
85 #define I2CESRTOIE_BIT 0x2
86 #define I2CBMDZ_BIT 0x0040
87 #define I2CBMAG_BIT 0x0020
88 #define I2CMBB_BIT 0x0020
89 #define BUFFER_MODE_MASK (I2CBMFI_BIT | I2CBMAL_BIT | I2CBMNA_BIT | \
90 I2CBMTO_BIT | I2CBMIS_BIT)
91 #define I2C_ADDR_MSK 0xFF
92 #define I2C_MSB_2B_MSK 0x300
93 #define FAST_MODE_CLK 400
94 #define FAST_MODE_EN 0x0001
95 #define SUB_ADDR_LEN_MAX 4
96 #define BUF_LEN_MAX 32
97 #define PCH_BUFFER_MODE 0x1
98 #define EEPROM_SW_RST_MODE 0x0002
99 #define NORMAL_INTR_ENBL 0x0300
100 #define EEPROM_RST_INTR_ENBL (I2CESRFIIE_BIT | I2CESRTOIE_BIT)
101 #define EEPROM_RST_INTR_DISBL 0x0
102 #define BUFFER_MODE_INTR_ENBL 0x001F
103 #define BUFFER_MODE_INTR_DISBL 0x0
104 #define NORMAL_MODE 0x0
105 #define BUFFER_MODE 0x1
106 #define EEPROM_SR_MODE 0x2
107 #define I2C_TX_MODE 0x0010
108 #define PCH_BUF_TX 0xFFF7
109 #define PCH_BUF_RD 0x0008
110 #define I2C_ERROR_MASK (I2CESRTO_EVENT | I2CBMIS_EVENT | I2CBMTO_EVENT | \
111 I2CBMNA_EVENT | I2CBMAL_EVENT | I2CMAL_EVENT)
112 #define I2CMAL_EVENT 0x0001
113 #define I2CMCF_EVENT 0x0002
114 #define I2CBMFI_EVENT 0x0004
115 #define I2CBMAL_EVENT 0x0008
116 #define I2CBMNA_EVENT 0x0010
117 #define I2CBMTO_EVENT 0x0020
118 #define I2CBMIS_EVENT 0x0040
119 #define I2CESRFI_EVENT 0x0080
120 #define I2CESRTO_EVENT 0x0100
121 #define PCI_DEVICE_ID_PCH_I2C 0x8817
123 #define pch_dbg(adap, fmt, arg...) \
124 dev_dbg(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg)
126 #define pch_err(adap, fmt, arg...) \
127 dev_err(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg)
129 #define pch_pci_err(pdev, fmt, arg...) \
130 dev_err(&pdev->dev, "%s :" fmt, __func__, ##arg)
132 #define pch_pci_dbg(pdev, fmt, arg...) \
133 dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg)
136 Set the number of I2C instance max
137 Intel EG20T PCH : 1ch
138 LAPIS Semiconductor ML7213 IOH : 2ch
139 LAPIS Semiconductor ML7831 IOH : 1ch
141 #define PCH_I2C_MAX_DEV 2
144 * struct i2c_algo_pch_data - for I2C driver functionalities
145 * @pch_adapter: stores the reference to i2c_adapter structure
146 * @p_adapter_info: stores the reference to adapter_info structure
147 * @pch_base_address: specifies the remapped base address
148 * @pch_buff_mode_en: specifies if buffer mode is enabled
149 * @pch_event_flag: specifies occurrence of interrupt events
150 * @pch_i2c_xfer_in_progress: specifies whether the transfer is completed
152 struct i2c_algo_pch_data
{
153 struct i2c_adapter pch_adapter
;
154 struct adapter_info
*p_adapter_info
;
155 void __iomem
*pch_base_address
;
156 int pch_buff_mode_en
;
158 bool pch_i2c_xfer_in_progress
;
162 * struct adapter_info - This structure holds the adapter information for the
164 * @pch_data: stores a list of i2c_algo_pch_data
165 * @pch_i2c_suspended: specifies whether the system is suspended or not
166 * perhaps with more lines and words.
167 * @ch_num: specifies the number of i2c instance
169 * pch_data has as many elements as maximum I2C channels
171 struct adapter_info
{
172 struct i2c_algo_pch_data pch_data
[PCH_I2C_MAX_DEV
];
173 bool pch_i2c_suspended
;
178 static int pch_i2c_speed
= 100; /* I2C bus speed in Kbps */
179 static int pch_clk
= 50000; /* specifies I2C clock speed in KHz */
180 static wait_queue_head_t pch_event
;
181 static DEFINE_MUTEX(pch_mutex
);
183 /* Definition for ML7213 by LAPIS Semiconductor */
184 #define PCI_VENDOR_ID_ROHM 0x10DB
185 #define PCI_DEVICE_ID_ML7213_I2C 0x802D
186 #define PCI_DEVICE_ID_ML7223_I2C 0x8010
187 #define PCI_DEVICE_ID_ML7831_I2C 0x8817
189 static DEFINE_PCI_DEVICE_TABLE(pch_pcidev_id
) = {
190 { PCI_VDEVICE(INTEL
, PCI_DEVICE_ID_PCH_I2C
), 1, },
191 { PCI_VDEVICE(ROHM
, PCI_DEVICE_ID_ML7213_I2C
), 2, },
192 { PCI_VDEVICE(ROHM
, PCI_DEVICE_ID_ML7223_I2C
), 1, },
193 { PCI_VDEVICE(ROHM
, PCI_DEVICE_ID_ML7831_I2C
), 1, },
197 static irqreturn_t
pch_i2c_handler(int irq
, void *pData
);
199 static inline void pch_setbit(void __iomem
*addr
, u32 offset
, u32 bitmask
)
202 val
= ioread32(addr
+ offset
);
204 iowrite32(val
, addr
+ offset
);
207 static inline void pch_clrbit(void __iomem
*addr
, u32 offset
, u32 bitmask
)
210 val
= ioread32(addr
+ offset
);
212 iowrite32(val
, addr
+ offset
);
216 * pch_i2c_init() - hardware initialization of I2C module
217 * @adap: Pointer to struct i2c_algo_pch_data.
219 static void pch_i2c_init(struct i2c_algo_pch_data
*adap
)
221 void __iomem
*p
= adap
->pch_base_address
;
226 /* reset I2C controller */
227 iowrite32(0x01, p
+ PCH_I2CSRST
);
229 iowrite32(0x0, p
+ PCH_I2CSRST
);
231 /* Initialize I2C registers */
232 iowrite32(0x21, p
+ PCH_I2CNF
);
234 pch_setbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_I2CCTL_I2CMEN
);
236 if (pch_i2c_speed
!= 400)
239 reg_value
= PCH_I2CCTL_I2CMEN
;
240 if (pch_i2c_speed
== FAST_MODE_CLK
) {
241 reg_value
|= FAST_MODE_EN
;
242 pch_dbg(adap
, "Fast mode enabled\n");
245 if (pch_clk
> PCH_MAX_CLK
)
248 pch_i2cbc
= (pch_clk
+ (pch_i2c_speed
* 4)) / (pch_i2c_speed
* 8);
249 /* Set transfer speed in I2CBC */
250 iowrite32(pch_i2cbc
, p
+ PCH_I2CBC
);
252 pch_i2ctmr
= (pch_clk
) / 8;
253 iowrite32(pch_i2ctmr
, p
+ PCH_I2CTMR
);
255 reg_value
|= NORMAL_INTR_ENBL
; /* Enable interrupts in normal mode */
256 iowrite32(reg_value
, p
+ PCH_I2CCTL
);
259 "I2CCTL=%x pch_i2cbc=%x pch_i2ctmr=%x Enable interrupts\n",
260 ioread32(p
+ PCH_I2CCTL
), pch_i2cbc
, pch_i2ctmr
);
262 init_waitqueue_head(&pch_event
);
266 * pch_i2c_wait_for_bus_idle() - check the status of bus.
267 * @adap: Pointer to struct i2c_algo_pch_data.
268 * @timeout: waiting time counter (ms).
270 static s32
pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data
*adap
,
273 void __iomem
*p
= adap
->pch_base_address
;
275 unsigned long end
= jiffies
+ msecs_to_jiffies(timeout
);
277 while (ioread32(p
+ PCH_I2CSR
) & I2CMBB_BIT
) {
278 if (time_after(jiffies
, end
)) {
279 pch_dbg(adap
, "I2CSR = %x\n", ioread32(p
+ PCH_I2CSR
));
280 pch_err(adap
, "%s: Timeout Error.return%d\n",
288 /* Retry after some usecs */
291 /* Wait a bit more without consuming CPU */
292 usleep_range(20, 1000);
301 * pch_i2c_start() - Generate I2C start condition in normal mode.
302 * @adap: Pointer to struct i2c_algo_pch_data.
304 * Generate I2C start condition in normal mode by setting I2CCTL.I2CMSTA to 1.
306 static void pch_i2c_start(struct i2c_algo_pch_data
*adap
)
308 void __iomem
*p
= adap
->pch_base_address
;
309 pch_dbg(adap
, "I2CCTL = %x\n", ioread32(p
+ PCH_I2CCTL
));
310 pch_setbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_START
);
314 * pch_i2c_stop() - generate stop condition in normal mode.
315 * @adap: Pointer to struct i2c_algo_pch_data.
317 static void pch_i2c_stop(struct i2c_algo_pch_data
*adap
)
319 void __iomem
*p
= adap
->pch_base_address
;
320 pch_dbg(adap
, "I2CCTL = %x\n", ioread32(p
+ PCH_I2CCTL
));
321 /* clear the start bit */
322 pch_clrbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_START
);
325 static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data
*adap
)
328 void __iomem
*p
= adap
->pch_base_address
;
330 ret
= wait_event_timeout(pch_event
,
331 (adap
->pch_event_flag
!= 0), msecs_to_jiffies(1000));
333 pch_err(adap
, "%s:wait-event timeout\n", __func__
);
334 adap
->pch_event_flag
= 0;
340 if (adap
->pch_event_flag
& I2C_ERROR_MASK
) {
341 pch_err(adap
, "Lost Arbitration\n");
342 adap
->pch_event_flag
= 0;
343 pch_clrbit(adap
->pch_base_address
, PCH_I2CSR
, I2CMAL_BIT
);
344 pch_clrbit(adap
->pch_base_address
, PCH_I2CSR
, I2CMIF_BIT
);
349 adap
->pch_event_flag
= 0;
351 if (ioread32(p
+ PCH_I2CSR
) & PCH_GETACK
) {
352 pch_dbg(adap
, "Receive NACK for slave address setting\n");
360 * pch_i2c_repstart() - generate repeated start condition in normal mode
361 * @adap: Pointer to struct i2c_algo_pch_data.
363 static void pch_i2c_repstart(struct i2c_algo_pch_data
*adap
)
365 void __iomem
*p
= adap
->pch_base_address
;
366 pch_dbg(adap
, "I2CCTL = %x\n", ioread32(p
+ PCH_I2CCTL
));
367 pch_setbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_REPSTART
);
371 * pch_i2c_writebytes() - write data to I2C bus in normal mode
372 * @i2c_adap: Pointer to the struct i2c_adapter.
373 * @last: specifies whether last message or not.
374 * In the case of compound mode it will be 1 for last message,
376 * @first: specifies whether first message or not.
377 * 1 for first message otherwise 0.
379 static s32
pch_i2c_writebytes(struct i2c_adapter
*i2c_adap
,
380 struct i2c_msg
*msgs
, u32 last
, u32 first
)
382 struct i2c_algo_pch_data
*adap
= i2c_adap
->algo_data
;
390 void __iomem
*p
= adap
->pch_base_address
;
396 /* enable master tx */
397 pch_setbit(adap
->pch_base_address
, PCH_I2CCTL
, I2C_TX_MODE
);
399 pch_dbg(adap
, "I2CCTL = %x msgs->len = %d\n", ioread32(p
+ PCH_I2CCTL
),
403 if (pch_i2c_wait_for_bus_idle(adap
, BUS_IDLE_TIMEOUT
) == -ETIME
)
407 if (msgs
->flags
& I2C_M_TEN
) {
408 addr_2_msb
= ((addr
& I2C_MSB_2B_MSK
) >> 7) & 0x06;
409 iowrite32(addr_2_msb
| TEN_BIT_ADDR_MASK
, p
+ PCH_I2CDR
);
413 rtn
= pch_i2c_wait_for_check_xfer(adap
);
417 addr_8_lsb
= (addr
& I2C_ADDR_MSK
);
418 iowrite32(addr_8_lsb
, p
+ PCH_I2CDR
);
420 /* set 7 bit slave address and R/W bit as 0 */
421 iowrite32(addr
<< 1, p
+ PCH_I2CDR
);
426 rtn
= pch_i2c_wait_for_check_xfer(adap
);
430 for (wrcount
= 0; wrcount
< length
; ++wrcount
) {
431 /* write buffer value to I2C data register */
432 iowrite32(buf
[wrcount
], p
+ PCH_I2CDR
);
433 pch_dbg(adap
, "writing %x to Data register\n", buf
[wrcount
]);
435 rtn
= pch_i2c_wait_for_check_xfer(adap
);
439 pch_clrbit(adap
->pch_base_address
, PCH_I2CSR
, I2CMCF_BIT
);
440 pch_clrbit(adap
->pch_base_address
, PCH_I2CSR
, I2CMIF_BIT
);
443 /* check if this is the last message */
447 pch_i2c_repstart(adap
);
449 pch_dbg(adap
, "return=%d\n", wrcount
);
455 * pch_i2c_sendack() - send ACK
456 * @adap: Pointer to struct i2c_algo_pch_data.
458 static void pch_i2c_sendack(struct i2c_algo_pch_data
*adap
)
460 void __iomem
*p
= adap
->pch_base_address
;
461 pch_dbg(adap
, "I2CCTL = %x\n", ioread32(p
+ PCH_I2CCTL
));
462 pch_clrbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_ACK
);
466 * pch_i2c_sendnack() - send NACK
467 * @adap: Pointer to struct i2c_algo_pch_data.
469 static void pch_i2c_sendnack(struct i2c_algo_pch_data
*adap
)
471 void __iomem
*p
= adap
->pch_base_address
;
472 pch_dbg(adap
, "I2CCTL = %x\n", ioread32(p
+ PCH_I2CCTL
));
473 pch_setbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_ACK
);
477 * pch_i2c_restart() - Generate I2C restart condition in normal mode.
478 * @adap: Pointer to struct i2c_algo_pch_data.
480 * Generate I2C restart condition in normal mode by setting I2CCTL.I2CRSTA.
482 static void pch_i2c_restart(struct i2c_algo_pch_data
*adap
)
484 void __iomem
*p
= adap
->pch_base_address
;
485 pch_dbg(adap
, "I2CCTL = %x\n", ioread32(p
+ PCH_I2CCTL
));
486 pch_setbit(adap
->pch_base_address
, PCH_I2CCTL
, PCH_RESTART
);
490 * pch_i2c_readbytes() - read data from I2C bus in normal mode.
491 * @i2c_adap: Pointer to the struct i2c_adapter.
492 * @msgs: Pointer to i2c_msg structure.
493 * @last: specifies whether last message or not.
494 * @first: specifies whether first message or not.
496 static s32
pch_i2c_readbytes(struct i2c_adapter
*i2c_adap
, struct i2c_msg
*msgs
,
499 struct i2c_algo_pch_data
*adap
= i2c_adap
->algo_data
;
507 void __iomem
*p
= adap
->pch_base_address
;
514 /* enable master reception */
515 pch_clrbit(adap
->pch_base_address
, PCH_I2CCTL
, I2C_TX_MODE
);
518 if (pch_i2c_wait_for_bus_idle(adap
, BUS_IDLE_TIMEOUT
) == -ETIME
)
522 if (msgs
->flags
& I2C_M_TEN
) {
523 addr_2_msb
= ((addr
& I2C_MSB_2B_MSK
) >> 7);
524 iowrite32(addr_2_msb
| TEN_BIT_ADDR_MASK
, p
+ PCH_I2CDR
);
528 rtn
= pch_i2c_wait_for_check_xfer(adap
);
532 addr_8_lsb
= (addr
& I2C_ADDR_MSK
);
533 iowrite32(addr_8_lsb
, p
+ PCH_I2CDR
);
535 pch_i2c_restart(adap
);
537 rtn
= pch_i2c_wait_for_check_xfer(adap
);
541 addr_2_msb
|= I2C_RD
;
542 iowrite32(addr_2_msb
| TEN_BIT_ADDR_MASK
, p
+ PCH_I2CDR
);
544 /* 7 address bits + R/W bit */
545 addr
= (((addr
) << 1) | (I2C_RD
));
546 iowrite32(addr
, p
+ PCH_I2CDR
);
549 /* check if it is the first message */
553 rtn
= pch_i2c_wait_for_check_xfer(adap
);
559 ioread32(p
+ PCH_I2CDR
); /* Dummy read needs */
565 pch_i2c_sendack(adap
);
568 for (loop
= 1, read_index
= 0; loop
< length
; loop
++) {
569 buf
[read_index
] = ioread32(p
+ PCH_I2CDR
);
574 rtn
= pch_i2c_wait_for_check_xfer(adap
);
579 pch_i2c_sendnack(adap
);
581 buf
[read_index
] = ioread32(p
+ PCH_I2CDR
); /* Read final - 1 */
586 rtn
= pch_i2c_wait_for_check_xfer(adap
);
593 pch_i2c_repstart(adap
);
595 buf
[read_index
++] = ioread32(p
+ PCH_I2CDR
); /* Read Final */
603 * pch_i2c_cb() - Interrupt handler Call back function
604 * @adap: Pointer to struct i2c_algo_pch_data.
606 static void pch_i2c_cb(struct i2c_algo_pch_data
*adap
)
609 void __iomem
*p
= adap
->pch_base_address
;
611 sts
= ioread32(p
+ PCH_I2CSR
);
612 sts
&= (I2CMAL_BIT
| I2CMCF_BIT
| I2CMIF_BIT
);
613 if (sts
& I2CMAL_BIT
)
614 adap
->pch_event_flag
|= I2CMAL_EVENT
;
616 if (sts
& I2CMCF_BIT
)
617 adap
->pch_event_flag
|= I2CMCF_EVENT
;
619 /* clear the applicable bits */
620 pch_clrbit(adap
->pch_base_address
, PCH_I2CSR
, sts
);
622 pch_dbg(adap
, "PCH_I2CSR = %x\n", ioread32(p
+ PCH_I2CSR
));
628 * pch_i2c_handler() - interrupt handler for the PCH I2C controller
630 * @pData: cookie passed back to the handler function.
632 static irqreturn_t
pch_i2c_handler(int irq
, void *pData
)
637 struct adapter_info
*adap_info
= pData
;
641 for (i
= 0, flag
= 0; i
< adap_info
->ch_num
; i
++) {
642 p
= adap_info
->pch_data
[i
].pch_base_address
;
643 mode
= ioread32(p
+ PCH_I2CMOD
);
644 mode
&= BUFFER_MODE
| EEPROM_SR_MODE
;
645 if (mode
!= NORMAL_MODE
) {
646 pch_err(adap_info
->pch_data
,
647 "I2C-%d mode(%d) is not supported\n", mode
, i
);
650 reg_val
= ioread32(p
+ PCH_I2CSR
);
651 if (reg_val
& (I2CMAL_BIT
| I2CMCF_BIT
| I2CMIF_BIT
)) {
652 pch_i2c_cb(&adap_info
->pch_data
[i
]);
657 return flag
? IRQ_HANDLED
: IRQ_NONE
;
661 * pch_i2c_xfer() - Reading adnd writing data through I2C bus
662 * @i2c_adap: Pointer to the struct i2c_adapter.
663 * @msgs: Pointer to i2c_msg structure.
664 * @num: number of messages.
666 static s32
pch_i2c_xfer(struct i2c_adapter
*i2c_adap
,
667 struct i2c_msg
*msgs
, s32 num
)
669 struct i2c_msg
*pmsg
;
674 struct i2c_algo_pch_data
*adap
= i2c_adap
->algo_data
;
676 ret
= mutex_lock_interruptible(&pch_mutex
);
680 if (adap
->p_adapter_info
->pch_i2c_suspended
) {
681 mutex_unlock(&pch_mutex
);
685 pch_dbg(adap
, "adap->p_adapter_info->pch_i2c_suspended is %d\n",
686 adap
->p_adapter_info
->pch_i2c_suspended
);
687 /* transfer not completed */
688 adap
->pch_i2c_xfer_in_progress
= true;
690 for (i
= 0; i
< num
&& ret
>= 0; i
++) {
692 pmsg
->flags
|= adap
->pch_buff_mode_en
;
693 status
= pmsg
->flags
;
695 "After invoking I2C_MODE_SEL :flag= 0x%x\n", status
);
697 if ((status
& (I2C_M_RD
)) != false) {
698 ret
= pch_i2c_readbytes(i2c_adap
, pmsg
, (i
+ 1 == num
),
701 ret
= pch_i2c_writebytes(i2c_adap
, pmsg
, (i
+ 1 == num
),
706 adap
->pch_i2c_xfer_in_progress
= false; /* transfer completed */
708 mutex_unlock(&pch_mutex
);
710 return (ret
< 0) ? ret
: num
;
714 * pch_i2c_func() - return the functionality of the I2C driver
715 * @adap: Pointer to struct i2c_algo_pch_data.
717 static u32
pch_i2c_func(struct i2c_adapter
*adap
)
719 return I2C_FUNC_I2C
| I2C_FUNC_SMBUS_EMUL
| I2C_FUNC_10BIT_ADDR
;
722 static struct i2c_algorithm pch_algorithm
= {
723 .master_xfer
= pch_i2c_xfer
,
724 .functionality
= pch_i2c_func
728 * pch_i2c_disbl_int() - Disable PCH I2C interrupts
729 * @adap: Pointer to struct i2c_algo_pch_data.
731 static void pch_i2c_disbl_int(struct i2c_algo_pch_data
*adap
)
733 void __iomem
*p
= adap
->pch_base_address
;
735 pch_clrbit(adap
->pch_base_address
, PCH_I2CCTL
, NORMAL_INTR_ENBL
);
737 iowrite32(EEPROM_RST_INTR_DISBL
, p
+ PCH_I2CESRMSK
);
739 iowrite32(BUFFER_MODE_INTR_DISBL
, p
+ PCH_I2CBUFMSK
);
742 static int pch_i2c_probe(struct pci_dev
*pdev
,
743 const struct pci_device_id
*id
)
745 void __iomem
*base_addr
;
748 struct adapter_info
*adap_info
;
749 struct i2c_adapter
*pch_adap
;
751 pch_pci_dbg(pdev
, "Entered.\n");
753 adap_info
= kzalloc((sizeof(struct adapter_info
)), GFP_KERNEL
);
754 if (adap_info
== NULL
) {
755 pch_pci_err(pdev
, "Memory allocation FAILED\n");
759 ret
= pci_enable_device(pdev
);
761 pch_pci_err(pdev
, "pci_enable_device FAILED\n");
765 ret
= pci_request_regions(pdev
, KBUILD_MODNAME
);
767 pch_pci_err(pdev
, "pci_request_regions FAILED\n");
771 base_addr
= pci_iomap(pdev
, 1, 0);
773 if (base_addr
== NULL
) {
774 pch_pci_err(pdev
, "pci_iomap FAILED\n");
779 /* Set the number of I2C channel instance */
780 adap_info
->ch_num
= id
->driver_data
;
782 ret
= request_irq(pdev
->irq
, pch_i2c_handler
, IRQF_SHARED
,
783 KBUILD_MODNAME
, adap_info
);
785 pch_pci_err(pdev
, "request_irq FAILED\n");
786 goto err_request_irq
;
789 for (i
= 0; i
< adap_info
->ch_num
; i
++) {
790 pch_adap
= &adap_info
->pch_data
[i
].pch_adapter
;
791 adap_info
->pch_i2c_suspended
= false;
793 adap_info
->pch_data
[i
].p_adapter_info
= adap_info
;
795 pch_adap
->owner
= THIS_MODULE
;
796 pch_adap
->class = I2C_CLASS_HWMON
;
797 strlcpy(pch_adap
->name
, KBUILD_MODNAME
, sizeof(pch_adap
->name
));
798 pch_adap
->algo
= &pch_algorithm
;
799 pch_adap
->algo_data
= &adap_info
->pch_data
[i
];
801 /* base_addr + offset; */
802 adap_info
->pch_data
[i
].pch_base_address
= base_addr
+ 0x100 * i
;
804 pch_adap
->dev
.parent
= &pdev
->dev
;
806 pch_i2c_init(&adap_info
->pch_data
[i
]);
809 ret
= i2c_add_numbered_adapter(pch_adap
);
811 pch_pci_err(pdev
, "i2c_add_adapter[ch:%d] FAILED\n", i
);
812 goto err_add_adapter
;
816 pci_set_drvdata(pdev
, adap_info
);
817 pch_pci_dbg(pdev
, "returns %d.\n", ret
);
821 for (j
= 0; j
< i
; j
++)
822 i2c_del_adapter(&adap_info
->pch_data
[j
].pch_adapter
);
823 free_irq(pdev
->irq
, adap_info
);
825 pci_iounmap(pdev
, base_addr
);
827 pci_release_regions(pdev
);
829 pci_disable_device(pdev
);
835 static void pch_i2c_remove(struct pci_dev
*pdev
)
838 struct adapter_info
*adap_info
= pci_get_drvdata(pdev
);
840 free_irq(pdev
->irq
, adap_info
);
842 for (i
= 0; i
< adap_info
->ch_num
; i
++) {
843 pch_i2c_disbl_int(&adap_info
->pch_data
[i
]);
844 i2c_del_adapter(&adap_info
->pch_data
[i
].pch_adapter
);
847 if (adap_info
->pch_data
[0].pch_base_address
)
848 pci_iounmap(pdev
, adap_info
->pch_data
[0].pch_base_address
);
850 for (i
= 0; i
< adap_info
->ch_num
; i
++)
851 adap_info
->pch_data
[i
].pch_base_address
= NULL
;
853 pci_release_regions(pdev
);
855 pci_disable_device(pdev
);
860 static int pch_i2c_suspend(struct pci_dev
*pdev
, pm_message_t state
)
864 struct adapter_info
*adap_info
= pci_get_drvdata(pdev
);
865 void __iomem
*p
= adap_info
->pch_data
[0].pch_base_address
;
867 adap_info
->pch_i2c_suspended
= true;
869 for (i
= 0; i
< adap_info
->ch_num
; i
++) {
870 while ((adap_info
->pch_data
[i
].pch_i2c_xfer_in_progress
)) {
871 /* Wait until all channel transfers are completed */
876 /* Disable the i2c interrupts */
877 for (i
= 0; i
< adap_info
->ch_num
; i
++)
878 pch_i2c_disbl_int(&adap_info
->pch_data
[i
]);
880 pch_pci_dbg(pdev
, "I2CSR = %x I2CBUFSTA = %x I2CESRSTA = %x "
881 "invoked function pch_i2c_disbl_int successfully\n",
882 ioread32(p
+ PCH_I2CSR
), ioread32(p
+ PCH_I2CBUFSTA
),
883 ioread32(p
+ PCH_I2CESRSTA
));
885 ret
= pci_save_state(pdev
);
888 pch_pci_err(pdev
, "pci_save_state\n");
892 pci_enable_wake(pdev
, PCI_D3hot
, 0);
893 pci_disable_device(pdev
);
894 pci_set_power_state(pdev
, pci_choose_state(pdev
, state
));
899 static int pch_i2c_resume(struct pci_dev
*pdev
)
902 struct adapter_info
*adap_info
= pci_get_drvdata(pdev
);
904 pci_set_power_state(pdev
, PCI_D0
);
905 pci_restore_state(pdev
);
907 if (pci_enable_device(pdev
) < 0) {
908 pch_pci_err(pdev
, "pch_i2c_resume:pci_enable_device FAILED\n");
912 pci_enable_wake(pdev
, PCI_D3hot
, 0);
914 for (i
= 0; i
< adap_info
->ch_num
; i
++)
915 pch_i2c_init(&adap_info
->pch_data
[i
]);
917 adap_info
->pch_i2c_suspended
= false;
922 #define pch_i2c_suspend NULL
923 #define pch_i2c_resume NULL
926 static struct pci_driver pch_pcidriver
= {
927 .name
= KBUILD_MODNAME
,
928 .id_table
= pch_pcidev_id
,
929 .probe
= pch_i2c_probe
,
930 .remove
= pch_i2c_remove
,
931 .suspend
= pch_i2c_suspend
,
932 .resume
= pch_i2c_resume
935 module_pci_driver(pch_pcidriver
);
937 MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C");
938 MODULE_LICENSE("GPL");
939 MODULE_AUTHOR("Tomoya MORINAGA. <tomoya.rohm@gmail.com>");
940 module_param(pch_i2c_speed
, int, (S_IRUSR
| S_IWUSR
));
941 module_param(pch_clk
, int, (S_IRUSR
| S_IWUSR
));