drivers/iio/gyro/st_gyro_core.c

   1 /*
   2  * STMicroelectronics gyroscopes driver
   3  *
   4  * Copyright 2012-2013 STMicroelectronics Inc.
   5  *
   6  * Denis Ciocca <denis.ciocca@st.com>
   7  *
   8  * Licensed under the GPL-2.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/module.h>
  13 #include <linux/slab.h>
  14 #include <linux/errno.h>
  15 #include <linux/types.h>
  16 #include <linux/mutex.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/i2c.h>
  19 #include <linux/gpio.h>
  20 #include <linux/irq.h>
  21 #include <linux/delay.h>
  22 #include <linux/iio/iio.h>
  23 #include <linux/iio/sysfs.h>
  24 #include <linux/iio/trigger.h>
  25 #include <linux/iio/buffer.h>
  26
  27 #include <linux/iio/common/st_sensors.h>
  28 #include "st_gyro.h"
  29
  30 #define ST_GYRO_NUMBER_DATA_CHANNELS            3
  31
  32 /* DEFAULT VALUE FOR SENSORS */
  33 #define ST_GYRO_DEFAULT_OUT_X_L_ADDR            0x28
  34 #define ST_GYRO_DEFAULT_OUT_Y_L_ADDR            0x2a
  35 #define ST_GYRO_DEFAULT_OUT_Z_L_ADDR            0x2c
  36
  37 /* FULLSCALE */
  38 #define ST_GYRO_FS_AVL_250DPS                   250
  39 #define ST_GYRO_FS_AVL_500DPS                   500
  40 #define ST_GYRO_FS_AVL_2000DPS                  2000
  41
  42 /* CUSTOM VALUES FOR SENSOR 1 */
  43 #define ST_GYRO_1_WAI_EXP                       0xd3
  44 #define ST_GYRO_1_ODR_ADDR                      0x20
  45 #define ST_GYRO_1_ODR_MASK                      0xc0
  46 #define ST_GYRO_1_ODR_AVL_100HZ_VAL             0x00
  47 #define ST_GYRO_1_ODR_AVL_200HZ_VAL             0x01
  48 #define ST_GYRO_1_ODR_AVL_400HZ_VAL             0x02
  49 #define ST_GYRO_1_ODR_AVL_800HZ_VAL             0x03
  50 #define ST_GYRO_1_PW_ADDR                       0x20
  51 #define ST_GYRO_1_PW_MASK                       0x08
  52 #define ST_GYRO_1_FS_ADDR                       0x23
  53 #define ST_GYRO_1_FS_MASK                       0x30
  54 #define ST_GYRO_1_FS_AVL_250_VAL                0x00
  55 #define ST_GYRO_1_FS_AVL_500_VAL                0x01
  56 #define ST_GYRO_1_FS_AVL_2000_VAL               0x02
  57 #define ST_GYRO_1_FS_AVL_250_GAIN               IIO_DEGREE_TO_RAD(8750)
  58 #define ST_GYRO_1_FS_AVL_500_GAIN               IIO_DEGREE_TO_RAD(17500)
  59 #define ST_GYRO_1_FS_AVL_2000_GAIN              IIO_DEGREE_TO_RAD(70000)
  60 #define ST_GYRO_1_BDU_ADDR                      0x23
  61 #define ST_GYRO_1_BDU_MASK                      0x80
  62 #define ST_GYRO_1_DRDY_IRQ_ADDR                 0x22
  63 #define ST_GYRO_1_DRDY_IRQ_INT2_MASK            0x08
  64 #define ST_GYRO_1_MULTIREAD_BIT                 true
  65
  66 /* CUSTOM VALUES FOR SENSOR 2 */
  67 #define ST_GYRO_2_WAI_EXP                       0xd4
  68 #define ST_GYRO_2_ODR_ADDR                      0x20
  69 #define ST_GYRO_2_ODR_MASK                      0xc0
  70 #define ST_GYRO_2_ODR_AVL_95HZ_VAL              0x00
  71 #define ST_GYRO_2_ODR_AVL_190HZ_VAL             0x01
  72 #define ST_GYRO_2_ODR_AVL_380HZ_VAL             0x02
  73 #define ST_GYRO_2_ODR_AVL_760HZ_VAL             0x03
  74 #define ST_GYRO_2_PW_ADDR                       0x20
  75 #define ST_GYRO_2_PW_MASK                       0x08
  76 #define ST_GYRO_2_FS_ADDR                       0x23
  77 #define ST_GYRO_2_FS_MASK                       0x30
  78 #define ST_GYRO_2_FS_AVL_250_VAL                0x00
  79 #define ST_GYRO_2_FS_AVL_500_VAL                0x01
  80 #define ST_GYRO_2_FS_AVL_2000_VAL               0x02
  81 #define ST_GYRO_2_FS_AVL_250_GAIN               IIO_DEGREE_TO_RAD(8750)
  82 #define ST_GYRO_2_FS_AVL_500_GAIN               IIO_DEGREE_TO_RAD(17500)
  83 #define ST_GYRO_2_FS_AVL_2000_GAIN              IIO_DEGREE_TO_RAD(70000)
  84 #define ST_GYRO_2_BDU_ADDR                      0x23
  85 #define ST_GYRO_2_BDU_MASK                      0x80
  86 #define ST_GYRO_2_DRDY_IRQ_ADDR                 0x22
  87 #define ST_GYRO_2_DRDY_IRQ_INT2_MASK            0x08
  88 #define ST_GYRO_2_MULTIREAD_BIT                 true
  89
  90 static const struct iio_chan_spec st_gyro_16bit_channels[] = {
  91         ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
  92                         BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
  93                         ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
  94                         ST_GYRO_DEFAULT_OUT_X_L_ADDR),
  95         ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
  96                         BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
  97                         ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
  98                         ST_GYRO_DEFAULT_OUT_Y_L_ADDR),
  99         ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
 100                         BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 101                         ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
 102                         ST_GYRO_DEFAULT_OUT_Z_L_ADDR),
 103         IIO_CHAN_SOFT_TIMESTAMP(3)
 104 };
 105
 106 static const struct st_sensors st_gyro_sensors[] = {
 107         {
 108                 .wai = ST_GYRO_1_WAI_EXP,
 109                 .sensors_supported = {
 110                         [0] = L3G4200D_GYRO_DEV_NAME,
 111                         [1] = LSM330DL_GYRO_DEV_NAME,
 112                 },
 113                 .ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
 114                 .odr = {
 115                         .addr = ST_GYRO_1_ODR_ADDR,
 116                         .mask = ST_GYRO_1_ODR_MASK,
 117                         .odr_avl = {
 118                                 { 100, ST_GYRO_1_ODR_AVL_100HZ_VAL, },
 119                                 { 200, ST_GYRO_1_ODR_AVL_200HZ_VAL, },
 120                                 { 400, ST_GYRO_1_ODR_AVL_400HZ_VAL, },
 121                                 { 800, ST_GYRO_1_ODR_AVL_800HZ_VAL, },
 122                         },
 123                 },
 124                 .pw = {
 125                         .addr = ST_GYRO_1_PW_ADDR,
 126                         .mask = ST_GYRO_1_PW_MASK,
 127                         .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 128                         .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 129                 },
 130                 .enable_axis = {
 131                         .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
 132                         .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 133                 },
 134                 .fs = {
 135                         .addr = ST_GYRO_1_FS_ADDR,
 136                         .mask = ST_GYRO_1_FS_MASK,
 137                         .fs_avl = {
 138                                 [0] = {
 139                                         .num = ST_GYRO_FS_AVL_250DPS,
 140                                         .value = ST_GYRO_1_FS_AVL_250_VAL,
 141                                         .gain = ST_GYRO_1_FS_AVL_250_GAIN,
 142                                 },
 143                                 [1] = {
 144                                         .num = ST_GYRO_FS_AVL_500DPS,
 145                                         .value = ST_GYRO_1_FS_AVL_500_VAL,
 146                                         .gain = ST_GYRO_1_FS_AVL_500_GAIN,
 147                                 },
 148                                 [2] = {
 149                                         .num = ST_GYRO_FS_AVL_2000DPS,
 150                                         .value = ST_GYRO_1_FS_AVL_2000_VAL,
 151                                         .gain = ST_GYRO_1_FS_AVL_2000_GAIN,
 152                                 },
 153                         },
 154                 },
 155                 .bdu = {
 156                         .addr = ST_GYRO_1_BDU_ADDR,
 157                         .mask = ST_GYRO_1_BDU_MASK,
 158                 },
 159                 .drdy_irq = {
 160                         .addr = ST_GYRO_1_DRDY_IRQ_ADDR,
 161                         .mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK,
 162                 },
 163                 .multi_read_bit = ST_GYRO_1_MULTIREAD_BIT,
 164                 .bootime = 2,
 165         },
 166         {
 167                 .wai = ST_GYRO_2_WAI_EXP,
 168                 .sensors_supported = {
 169                         [0] = L3GD20_GYRO_DEV_NAME,
 170                         [1] = L3GD20H_GYRO_DEV_NAME,
 171                         [2] = LSM330D_GYRO_DEV_NAME,
 172                         [3] = LSM330DLC_GYRO_DEV_NAME,
 173                         [4] = L3G4IS_GYRO_DEV_NAME,
 174                         [5] = LSM330_GYRO_DEV_NAME,
 175                 },
 176                 .ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
 177                 .odr = {
 178                         .addr = ST_GYRO_2_ODR_ADDR,
 179                         .mask = ST_GYRO_2_ODR_MASK,
 180                         .odr_avl = {
 181                                 { 95, ST_GYRO_2_ODR_AVL_95HZ_VAL, },
 182                                 { 190, ST_GYRO_2_ODR_AVL_190HZ_VAL, },
 183                                 { 380, ST_GYRO_2_ODR_AVL_380HZ_VAL, },
 184                                 { 760, ST_GYRO_2_ODR_AVL_760HZ_VAL, },
 185                         },
 186                 },
 187                 .pw = {
 188                         .addr = ST_GYRO_2_PW_ADDR,
 189                         .mask = ST_GYRO_2_PW_MASK,
 190                         .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 191                         .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 192                 },
 193                 .enable_axis = {
 194                         .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
 195                         .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 196                 },
 197                 .fs = {
 198                         .addr = ST_GYRO_2_FS_ADDR,
 199                         .mask = ST_GYRO_2_FS_MASK,
 200                         .fs_avl = {
 201                                 [0] = {
 202                                         .num = ST_GYRO_FS_AVL_250DPS,
 203                                         .value = ST_GYRO_2_FS_AVL_250_VAL,
 204                                         .gain = ST_GYRO_2_FS_AVL_250_GAIN,
 205                                 },
 206                                 [1] = {
 207                                         .num = ST_GYRO_FS_AVL_500DPS,
 208                                         .value = ST_GYRO_2_FS_AVL_500_VAL,
 209                                         .gain = ST_GYRO_2_FS_AVL_500_GAIN,
 210                                 },
 211                                 [2] = {
 212                                         .num = ST_GYRO_FS_AVL_2000DPS,
 213                                         .value = ST_GYRO_2_FS_AVL_2000_VAL,
 214                                         .gain = ST_GYRO_2_FS_AVL_2000_GAIN,
 215                                 },
 216                         },
 217                 },
 218                 .bdu = {
 219                         .addr = ST_GYRO_2_BDU_ADDR,
 220                         .mask = ST_GYRO_2_BDU_MASK,
 221                 },
 222                 .drdy_irq = {
 223                         .addr = ST_GYRO_2_DRDY_IRQ_ADDR,
 224                         .mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK,
 225                 },
 226                 .multi_read_bit = ST_GYRO_2_MULTIREAD_BIT,
 227                 .bootime = 2,
 228         },
 229 };
 230
 231 static int st_gyro_read_raw(struct iio_dev *indio_dev,
 232                         struct iio_chan_spec const *ch, int *val,
 233                                                         int *val2, long mask)
 234 {
 235         int err;
 236         struct st_sensor_data *gdata = iio_priv(indio_dev);
 237
 238         switch (mask) {
 239         case IIO_CHAN_INFO_RAW:
 240                 err = st_sensors_read_info_raw(indio_dev, ch, val);
 241                 if (err < 0)
 242                         goto read_error;
 243
 244                 return IIO_VAL_INT;
 245         case IIO_CHAN_INFO_SCALE:
 246                 *val = 0;
 247                 *val2 = gdata->current_fullscale->gain;
 248                 return IIO_VAL_INT_PLUS_MICRO;
 249         default:
 250                 return -EINVAL;
 251         }
 252
 253 read_error:
 254         return err;
 255 }
 256
 257 static int st_gyro_write_raw(struct iio_dev *indio_dev,
 258                 struct iio_chan_spec const *chan, int val, int val2, long mask)
 259 {
 260         int err;
 261
 262         switch (mask) {
 263         case IIO_CHAN_INFO_SCALE:
 264                 err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
 265                 break;
 266         default:
 267                 err = -EINVAL;
 268         }
 269
 270         return err;
 271 }
 272
 273 static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
 274 static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
 275 static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_anglvel_scale_available);
 276
 277 static struct attribute *st_gyro_attributes[] = {
 278         &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 279         &iio_dev_attr_in_anglvel_scale_available.dev_attr.attr,
 280         &iio_dev_attr_sampling_frequency.dev_attr.attr,
 281         NULL,
 282 };
 283
 284 static const struct attribute_group st_gyro_attribute_group = {
 285         .attrs = st_gyro_attributes,
 286 };
 287
 288 static const struct iio_info gyro_info = {
 289         .driver_module = THIS_MODULE,
 290         .attrs = &st_gyro_attribute_group,
 291         .read_raw = &st_gyro_read_raw,
 292         .write_raw = &st_gyro_write_raw,
 293 };
 294
 295 #ifdef CONFIG_IIO_TRIGGER
 296 static const struct iio_trigger_ops st_gyro_trigger_ops = {
 297         .owner = THIS_MODULE,
 298         .set_trigger_state = ST_GYRO_TRIGGER_SET_STATE,
 299 };
 300 #define ST_GYRO_TRIGGER_OPS (&st_gyro_trigger_ops)
 301 #else
 302 #define ST_GYRO_TRIGGER_OPS NULL
 303 #endif
 304
 305 int st_gyro_common_probe(struct iio_dev *indio_dev,
 306                                         struct st_sensors_platform_data *pdata)
 307 {
 308         struct st_sensor_data *gdata = iio_priv(indio_dev);
 309         int irq = gdata->get_irq_data_ready(indio_dev);
 310         int err;
 311
 312         indio_dev->modes = INDIO_DIRECT_MODE;
 313         indio_dev->info = &gyro_info;
 314
 315         err = st_sensors_check_device_support(indio_dev,
 316                                 ARRAY_SIZE(st_gyro_sensors), st_gyro_sensors);
 317         if (err < 0)
 318                 return err;
 319
 320         gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
 321         gdata->multiread_bit = gdata->sensor->multi_read_bit;
 322         indio_dev->channels = gdata->sensor->ch;
 323         indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 324
 325         gdata->current_fullscale = (struct st_sensor_fullscale_avl *)
 326                                                 &gdata->sensor->fs.fs_avl[0];
 327         gdata->odr = gdata->sensor->odr.odr_avl[0].hz;
 328
 329         err = st_sensors_init_sensor(indio_dev, pdata);
 330         if (err < 0)
 331                 return err;
 332
 333         err = st_gyro_allocate_ring(indio_dev);
 334         if (err < 0)
 335                 return err;
 336
 337         if (irq > 0) {
 338                 err = st_sensors_allocate_trigger(indio_dev,
 339                                                   ST_GYRO_TRIGGER_OPS);
 340                 if (err < 0)
 341                         goto st_gyro_probe_trigger_error;
 342         }
 343
 344         err = iio_device_register(indio_dev);
 345         if (err)
 346                 goto st_gyro_device_register_error;
 347
 348         return 0;
 349
 350 st_gyro_device_register_error:
 351         if (irq > 0)
 352                 st_sensors_deallocate_trigger(indio_dev);
 353 st_gyro_probe_trigger_error:
 354         st_gyro_deallocate_ring(indio_dev);
 355
 356         return err;
 357 }
 358 EXPORT_SYMBOL(st_gyro_common_probe);
 359
 360 void st_gyro_common_remove(struct iio_dev *indio_dev)
 361 {
 362         struct st_sensor_data *gdata = iio_priv(indio_dev);
 363
 364         iio_device_unregister(indio_dev);
 365         if (gdata->get_irq_data_ready(indio_dev) > 0)
 366                 st_sensors_deallocate_trigger(indio_dev);
 367
 368         st_gyro_deallocate_ring(indio_dev);
 369 }
 370 EXPORT_SYMBOL(st_gyro_common_remove);
 371
 372 MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
 373 MODULE_DESCRIPTION("STMicroelectronics gyroscopes driver");
 374 MODULE_LICENSE("GPL v2");