PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / input / misc / ad714x-spi.c
blob3a90b710e30960e95421c1d486058ade968fd6bc
1 /*
2 * AD714X CapTouch Programmable Controller driver (SPI bus)
4 * Copyright 2009-2011 Analog Devices Inc.
6 * Licensed under the GPL-2 or later.
7 */
9 #include <linux/input.h> /* BUS_SPI */
10 #include <linux/module.h>
11 #include <linux/spi/spi.h>
12 #include <linux/pm.h>
13 #include <linux/types.h>
14 #include "ad714x.h"
16 #define AD714x_SPI_CMD_PREFIX 0xE000 /* bits 15:11 */
17 #define AD714x_SPI_READ BIT(10)
19 #ifdef CONFIG_PM_SLEEP
20 static int ad714x_spi_suspend(struct device *dev)
22 return ad714x_disable(spi_get_drvdata(to_spi_device(dev)));
25 static int ad714x_spi_resume(struct device *dev)
27 return ad714x_enable(spi_get_drvdata(to_spi_device(dev)));
29 #endif
31 static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume);
33 static int ad714x_spi_read(struct ad714x_chip *chip,
34 unsigned short reg, unsigned short *data, size_t len)
36 struct spi_device *spi = to_spi_device(chip->dev);
37 struct spi_message message;
38 struct spi_transfer xfer[2];
39 int i;
40 int error;
42 spi_message_init(&message);
43 memset(xfer, 0, sizeof(xfer));
45 chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX |
46 AD714x_SPI_READ | reg);
47 xfer[0].tx_buf = &chip->xfer_buf[0];
48 xfer[0].len = sizeof(chip->xfer_buf[0]);
49 spi_message_add_tail(&xfer[0], &message);
51 xfer[1].rx_buf = &chip->xfer_buf[1];
52 xfer[1].len = sizeof(chip->xfer_buf[1]) * len;
53 spi_message_add_tail(&xfer[1], &message);
55 error = spi_sync(spi, &message);
56 if (unlikely(error)) {
57 dev_err(chip->dev, "SPI read error: %d\n", error);
58 return error;
61 for (i = 0; i < len; i++)
62 data[i] = be16_to_cpu(chip->xfer_buf[i + 1]);
64 return 0;
67 static int ad714x_spi_write(struct ad714x_chip *chip,
68 unsigned short reg, unsigned short data)
70 struct spi_device *spi = to_spi_device(chip->dev);
71 int error;
73 chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX | reg);
74 chip->xfer_buf[1] = cpu_to_be16(data);
76 error = spi_write(spi, (u8 *)chip->xfer_buf,
77 2 * sizeof(*chip->xfer_buf));
78 if (unlikely(error)) {
79 dev_err(chip->dev, "SPI write error: %d\n", error);
80 return error;
83 return 0;
86 static int ad714x_spi_probe(struct spi_device *spi)
88 struct ad714x_chip *chip;
89 int err;
91 spi->bits_per_word = 8;
92 err = spi_setup(spi);
93 if (err < 0)
94 return err;
96 chip = ad714x_probe(&spi->dev, BUS_SPI, spi->irq,
97 ad714x_spi_read, ad714x_spi_write);
98 if (IS_ERR(chip))
99 return PTR_ERR(chip);
101 spi_set_drvdata(spi, chip);
103 return 0;
106 static int ad714x_spi_remove(struct spi_device *spi)
108 struct ad714x_chip *chip = spi_get_drvdata(spi);
110 ad714x_remove(chip);
112 return 0;
115 static struct spi_driver ad714x_spi_driver = {
116 .driver = {
117 .name = "ad714x_captouch",
118 .owner = THIS_MODULE,
119 .pm = &ad714x_spi_pm,
121 .probe = ad714x_spi_probe,
122 .remove = ad714x_spi_remove,
125 module_spi_driver(ad714x_spi_driver);
127 MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor SPI Bus Driver");
128 MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
129 MODULE_LICENSE("GPL");