drivers/irqchip/irq-bcm2835.c

   1 /*
   2  * Copyright 2010 Broadcom
   3  * Copyright 2012 Simon Arlott, Chris Boot, Stephen Warren
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * Quirk 1: Shortcut interrupts don't set the bank 1/2 register pending bits
  16  *
  17  * If an interrupt fires on bank 1 that isn't in the shortcuts list, bit 8
  18  * on bank 0 is set to signify that an interrupt in bank 1 has fired, and
  19  * to look in the bank 1 status register for more information.
  20  *
  21  * If an interrupt fires on bank 1 that _is_ in the shortcuts list, its
  22  * shortcut bit in bank 0 is set as well as its interrupt bit in the bank 1
  23  * status register, but bank 0 bit 8 is _not_ set.
  24  *
  25  * Quirk 2: You can't mask the register 1/2 pending interrupts
  26  *
  27  * In a proper cascaded interrupt controller, the interrupt lines with
  28  * cascaded interrupt controllers on them are just normal interrupt lines.
  29  * You can mask the interrupts and get on with things. With this controller
  30  * you can't do that.
  31  *
  32  * Quirk 3: The shortcut interrupts can't be (un)masked in bank 0
  33  *
  34  * Those interrupts that have shortcuts can only be masked/unmasked in
  35  * their respective banks' enable/disable registers. Doing so in the bank 0
  36  * enable/disable registers has no effect.
  37  *
  38  * The FIQ control register:
  39  *  Bits 0-6: IRQ (index in order of interrupts from banks 1, 2, then 0)
  40  *  Bit    7: Enable FIQ generation
  41  *  Bits  8+: Unused
  42  *
  43  * An interrupt must be disabled before configuring it for FIQ generation
  44  * otherwise both handlers will fire at the same time!
  45  */
  46
  47 #include <linux/io.h>
  48 #include <linux/slab.h>
  49 #include <linux/of_address.h>
  50 #include <linux/of_irq.h>
  51 #include <linux/irqdomain.h>
  52
  53 #include <asm/exception.h>
  54 #include <asm/mach/irq.h>
  55
  56 #include "irqchip.h"
  57
  58 /* Put the bank and irq (32 bits) into the hwirq */
  59 #define MAKE_HWIRQ(b, n)        ((b << 5) | (n))
  60 #define HWIRQ_BANK(i)           (i >> 5)
  61 #define HWIRQ_BIT(i)            BIT(i & 0x1f)
  62
  63 #define NR_IRQS_BANK0           8
  64 #define BANK0_HWIRQ_MASK        0xff
  65 /* Shortcuts can't be disabled so any unknown new ones need to be masked */
  66 #define SHORTCUT1_MASK          0x00007c00
  67 #define SHORTCUT2_MASK          0x001f8000
  68 #define SHORTCUT_SHIFT          10
  69 #define BANK1_HWIRQ             BIT(8)
  70 #define BANK2_HWIRQ             BIT(9)
  71 #define BANK0_VALID_MASK        (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \
  72                                         | SHORTCUT1_MASK | SHORTCUT2_MASK)
  73
  74 #define REG_FIQ_CONTROL         0x0c
  75
  76 #define NR_BANKS                3
  77 #define IRQS_PER_BANK           32
  78
  79 static int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
  80 static int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
  81 static int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 };
  82 static int bank_irqs[] __initconst = { 8, 32, 32 };
  83
  84 static const int shortcuts[] = {
  85         7, 9, 10, 18, 19,               /* Bank 1 */
  86         21, 22, 23, 24, 25, 30          /* Bank 2 */
  87 };
  88
  89 struct armctrl_ic {
  90         void __iomem *base;
  91         void __iomem *pending[NR_BANKS];
  92         void __iomem *enable[NR_BANKS];
  93         void __iomem *disable[NR_BANKS];
  94         struct irq_domain *domain;
  95 };
  96
  97 static struct armctrl_ic intc __read_mostly;
  98 static asmlinkage void __exception_irq_entry bcm2835_handle_irq(
  99         struct pt_regs *regs);
 100
 101 static void armctrl_mask_irq(struct irq_data *d)
 102 {
 103         writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]);
 104 }
 105
 106 static void armctrl_unmask_irq(struct irq_data *d)
 107 {
 108         writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]);
 109 }
 110
 111 static struct irq_chip armctrl_chip = {
 112         .name = "ARMCTRL-level",
 113         .irq_mask = armctrl_mask_irq,
 114         .irq_unmask = armctrl_unmask_irq
 115 };
 116
 117 static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr,
 118         const u32 *intspec, unsigned int intsize,
 119         unsigned long *out_hwirq, unsigned int *out_type)
 120 {
 121         if (WARN_ON(intsize != 2))
 122                 return -EINVAL;
 123
 124         if (WARN_ON(intspec[0] >= NR_BANKS))
 125                 return -EINVAL;
 126
 127         if (WARN_ON(intspec[1] >= IRQS_PER_BANK))
 128                 return -EINVAL;
 129
 130         if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0))
 131                 return -EINVAL;
 132
 133         *out_hwirq = MAKE_HWIRQ(intspec[0], intspec[1]);
 134         *out_type = IRQ_TYPE_NONE;
 135         return 0;
 136 }
 137
 138 static struct irq_domain_ops armctrl_ops = {
 139         .xlate = armctrl_xlate
 140 };
 141
 142 static int __init armctrl_of_init(struct device_node *node,
 143         struct device_node *parent)
 144 {
 145         void __iomem *base;
 146         int irq, b, i;
 147
 148         base = of_iomap(node, 0);
 149         if (!base)
 150                 panic("%s: unable to map IC registers\n",
 151                         node->full_name);
 152
 153         intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0),
 154                         &armctrl_ops, NULL);
 155         if (!intc.domain)
 156                 panic("%s: unable to create IRQ domain\n", node->full_name);
 157
 158         for (b = 0; b < NR_BANKS; b++) {
 159                 intc.pending[b] = base + reg_pending[b];
 160                 intc.enable[b] = base + reg_enable[b];
 161                 intc.disable[b] = base + reg_disable[b];
 162
 163                 for (i = 0; i < bank_irqs[b]; i++) {
 164                         irq = irq_create_mapping(intc.domain, MAKE_HWIRQ(b, i));
 165                         BUG_ON(irq <= 0);
 166                         irq_set_chip_and_handler(irq, &armctrl_chip,
 167                                 handle_level_irq);
 168                         set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 169                 }
 170         }
 171
 172         set_handle_irq(bcm2835_handle_irq);
 173         return 0;
 174 }
 175
 176 /*
 177  * Handle each interrupt across the entire interrupt controller.  This reads the
 178  * status register before handling each interrupt, which is necessary given that
 179  * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
 180  */
 181
 182 static void armctrl_handle_bank(int bank, struct pt_regs *regs)
 183 {
 184         u32 stat, irq;
 185
 186         while ((stat = readl_relaxed(intc.pending[bank]))) {
 187                 irq = MAKE_HWIRQ(bank, ffs(stat) - 1);
 188                 handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
 189         }
 190 }
 191
 192 static void armctrl_handle_shortcut(int bank, struct pt_regs *regs,
 193         u32 stat)
 194 {
 195         u32 irq = MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]);
 196         handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
 197 }
 198
 199 static asmlinkage void __exception_irq_entry bcm2835_handle_irq(
 200         struct pt_regs *regs)
 201 {
 202         u32 stat, irq;
 203
 204         while ((stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK)) {
 205                 if (stat & BANK0_HWIRQ_MASK) {
 206                         irq = MAKE_HWIRQ(0, ffs(stat & BANK0_HWIRQ_MASK) - 1);
 207                         handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
 208                 } else if (stat & SHORTCUT1_MASK) {
 209                         armctrl_handle_shortcut(1, regs, stat & SHORTCUT1_MASK);
 210                 } else if (stat & SHORTCUT2_MASK) {
 211                         armctrl_handle_shortcut(2, regs, stat & SHORTCUT2_MASK);
 212                 } else if (stat & BANK1_HWIRQ) {
 213                         armctrl_handle_bank(1, regs);
 214                 } else if (stat & BANK2_HWIRQ) {
 215                         armctrl_handle_bank(2, regs);
 216                 } else {
 217                         BUG();
 218                 }
 219         }
 220 }
 221
 222 IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic", armctrl_of_init);