PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / media / dvb-frontends / ves1x93.c
blob9c17eacaec24f738e63028e61cb9d7d3d793c9ba
1 /*
2 Driver for VES1893 and VES1993 QPSK Demodulators
4 Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
5 Copyright (C) 2001 Ronny Strutz <3des@elitedvb.de>
6 Copyright (C) 2002 Dennis Noermann <dennis.noermann@noernet.de>
7 Copyright (C) 2002-2003 Andreas Oberritter <obi@linuxtv.org>
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 #include <linux/kernel.h>
27 #include <linux/module.h>
28 #include <linux/init.h>
29 #include <linux/string.h>
30 #include <linux/slab.h>
31 #include <linux/delay.h>
33 #include "dvb_frontend.h"
34 #include "ves1x93.h"
37 struct ves1x93_state {
38 struct i2c_adapter* i2c;
39 /* configuration settings */
40 const struct ves1x93_config* config;
41 struct dvb_frontend frontend;
43 /* previous uncorrected block counter */
44 fe_spectral_inversion_t inversion;
45 u8 *init_1x93_tab;
46 u8 *init_1x93_wtab;
47 u8 tab_size;
48 u8 demod_type;
49 u32 frequency;
52 static int debug;
53 #define dprintk if (debug) printk
55 #define DEMOD_VES1893 0
56 #define DEMOD_VES1993 1
58 static u8 init_1893_tab [] = {
59 0x01, 0xa4, 0x35, 0x80, 0x2a, 0x0b, 0x55, 0xc4,
60 0x09, 0x69, 0x00, 0x86, 0x4c, 0x28, 0x7f, 0x00,
61 0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
62 0x80, 0x00, 0x21, 0xb0, 0x14, 0x00, 0xdc, 0x00,
63 0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
64 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
65 0x00, 0x55, 0x00, 0x00, 0x7f, 0x00
68 static u8 init_1993_tab [] = {
69 0x00, 0x9c, 0x35, 0x80, 0x6a, 0x09, 0x72, 0x8c,
70 0x09, 0x6b, 0x00, 0x00, 0x4c, 0x08, 0x00, 0x00,
71 0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
72 0x80, 0x40, 0x21, 0xb0, 0x00, 0x00, 0x00, 0x10,
73 0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
74 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00,
75 0x00, 0x55, 0x03, 0x00, 0x00, 0x00, 0x00, 0x03,
76 0x00, 0x00, 0x0e, 0x80, 0x00
79 static u8 init_1893_wtab[] =
81 1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0,
82 0,1,0,0,0,0,0,0, 1,0,1,1,0,0,0,1,
83 1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0,
84 1,1,1,0,1,1
87 static u8 init_1993_wtab[] =
89 1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0,
90 0,1,0,0,0,0,0,0, 1,1,1,1,0,0,0,1,
91 1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0,
92 1,1,1,0,1,1,1,1, 1,1,1,1,1
95 static int ves1x93_writereg (struct ves1x93_state* state, u8 reg, u8 data)
97 u8 buf [] = { 0x00, reg, data };
98 struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 3 };
99 int err;
101 if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
102 dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data);
103 return -EREMOTEIO;
106 return 0;
109 static u8 ves1x93_readreg (struct ves1x93_state* state, u8 reg)
111 int ret;
112 u8 b0 [] = { 0x00, reg };
113 u8 b1 [] = { 0 };
114 struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
115 { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
117 ret = i2c_transfer (state->i2c, msg, 2);
119 if (ret != 2) return ret;
121 return b1[0];
124 static int ves1x93_clr_bit (struct ves1x93_state* state)
126 msleep(10);
127 ves1x93_writereg (state, 0, state->init_1x93_tab[0] & 0xfe);
128 ves1x93_writereg (state, 0, state->init_1x93_tab[0]);
129 msleep(50);
130 return 0;
133 static int ves1x93_set_inversion (struct ves1x93_state* state, fe_spectral_inversion_t inversion)
135 u8 val;
138 * inversion on/off are interchanged because i and q seem to
139 * be swapped on the hardware
142 switch (inversion) {
143 case INVERSION_OFF:
144 val = 0xc0;
145 break;
146 case INVERSION_ON:
147 val = 0x80;
148 break;
149 case INVERSION_AUTO:
150 val = 0x00;
151 break;
152 default:
153 return -EINVAL;
156 return ves1x93_writereg (state, 0x0c, (state->init_1x93_tab[0x0c] & 0x3f) | val);
159 static int ves1x93_set_fec (struct ves1x93_state* state, fe_code_rate_t fec)
161 if (fec == FEC_AUTO)
162 return ves1x93_writereg (state, 0x0d, 0x08);
163 else if (fec < FEC_1_2 || fec > FEC_8_9)
164 return -EINVAL;
165 else
166 return ves1x93_writereg (state, 0x0d, fec - FEC_1_2);
169 static fe_code_rate_t ves1x93_get_fec (struct ves1x93_state* state)
171 return FEC_1_2 + ((ves1x93_readreg (state, 0x0d) >> 4) & 0x7);
174 static int ves1x93_set_symbolrate (struct ves1x93_state* state, u32 srate)
176 u32 BDR;
177 u32 ratio;
178 u8 ADCONF, FCONF, FNR, AGCR;
179 u32 BDRI;
180 u32 tmp;
181 u32 FIN;
183 dprintk("%s: srate == %d\n", __func__, (unsigned int) srate);
185 if (srate > state->config->xin/2)
186 srate = state->config->xin/2;
188 if (srate < 500000)
189 srate = 500000;
191 #define MUL (1UL<<26)
193 FIN = (state->config->xin + 6000) >> 4;
195 tmp = srate << 6;
196 ratio = tmp / FIN;
198 tmp = (tmp % FIN) << 8;
199 ratio = (ratio << 8) + tmp / FIN;
201 tmp = (tmp % FIN) << 8;
202 ratio = (ratio << 8) + tmp / FIN;
204 FNR = 0xff;
206 if (ratio < MUL/3) FNR = 0;
207 if (ratio < (MUL*11)/50) FNR = 1;
208 if (ratio < MUL/6) FNR = 2;
209 if (ratio < MUL/9) FNR = 3;
210 if (ratio < MUL/12) FNR = 4;
211 if (ratio < (MUL*11)/200) FNR = 5;
212 if (ratio < MUL/24) FNR = 6;
213 if (ratio < (MUL*27)/1000) FNR = 7;
214 if (ratio < MUL/48) FNR = 8;
215 if (ratio < (MUL*137)/10000) FNR = 9;
217 if (FNR == 0xff) {
218 ADCONF = 0x89;
219 FCONF = 0x80;
220 FNR = 0;
221 } else {
222 ADCONF = 0x81;
223 FCONF = 0x88 | (FNR >> 1) | ((FNR & 0x01) << 5);
224 /*FCONF = 0x80 | ((FNR & 0x01) << 5) | (((FNR > 1) & 0x03) << 3) | ((FNR >> 1) & 0x07);*/
227 BDR = (( (ratio << (FNR >> 1)) >> 4) + 1) >> 1;
228 BDRI = ( ((FIN << 8) / ((srate << (FNR >> 1)) >> 2)) + 1) >> 1;
230 dprintk("FNR= %d\n", FNR);
231 dprintk("ratio= %08x\n", (unsigned int) ratio);
232 dprintk("BDR= %08x\n", (unsigned int) BDR);
233 dprintk("BDRI= %02x\n", (unsigned int) BDRI);
235 if (BDRI > 0xff)
236 BDRI = 0xff;
238 ves1x93_writereg (state, 0x06, 0xff & BDR);
239 ves1x93_writereg (state, 0x07, 0xff & (BDR >> 8));
240 ves1x93_writereg (state, 0x08, 0x0f & (BDR >> 16));
242 ves1x93_writereg (state, 0x09, BDRI);
243 ves1x93_writereg (state, 0x20, ADCONF);
244 ves1x93_writereg (state, 0x21, FCONF);
246 AGCR = state->init_1x93_tab[0x05];
247 if (state->config->invert_pwm)
248 AGCR |= 0x20;
250 if (srate < 6000000)
251 AGCR |= 0x80;
252 else
253 AGCR &= ~0x80;
255 ves1x93_writereg (state, 0x05, AGCR);
257 /* ves1993 hates this, will lose lock */
258 if (state->demod_type != DEMOD_VES1993)
259 ves1x93_clr_bit (state);
261 return 0;
264 static int ves1x93_init (struct dvb_frontend* fe)
266 struct ves1x93_state* state = fe->demodulator_priv;
267 int i;
268 int val;
270 dprintk("%s: init chip\n", __func__);
272 for (i = 0; i < state->tab_size; i++) {
273 if (state->init_1x93_wtab[i]) {
274 val = state->init_1x93_tab[i];
276 if (state->config->invert_pwm && (i == 0x05)) val |= 0x20; /* invert PWM */
277 ves1x93_writereg (state, i, val);
281 return 0;
284 static int ves1x93_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
286 struct ves1x93_state* state = fe->demodulator_priv;
288 switch (voltage) {
289 case SEC_VOLTAGE_13:
290 return ves1x93_writereg (state, 0x1f, 0x20);
291 case SEC_VOLTAGE_18:
292 return ves1x93_writereg (state, 0x1f, 0x30);
293 case SEC_VOLTAGE_OFF:
294 return ves1x93_writereg (state, 0x1f, 0x00);
295 default:
296 return -EINVAL;
300 static int ves1x93_read_status(struct dvb_frontend* fe, fe_status_t* status)
302 struct ves1x93_state* state = fe->demodulator_priv;
304 u8 sync = ves1x93_readreg (state, 0x0e);
307 * The ves1893 sometimes returns sync values that make no sense,
308 * because, e.g., the SIGNAL bit is 0, while some of the higher
309 * bits are 1 (and how can there be a CARRIER w/o a SIGNAL?).
310 * Tests showed that the VITERBI and SYNC bits are returned
311 * reliably, while the SIGNAL and CARRIER bits ar sometimes wrong.
312 * If such a case occurs, we read the value again, until we get a
313 * valid value.
315 int maxtry = 10; /* just for safety - let's not get stuck here */
316 while ((sync & 0x03) != 0x03 && (sync & 0x0c) && maxtry--) {
317 msleep(10);
318 sync = ves1x93_readreg (state, 0x0e);
321 *status = 0;
323 if (sync & 1)
324 *status |= FE_HAS_SIGNAL;
326 if (sync & 2)
327 *status |= FE_HAS_CARRIER;
329 if (sync & 4)
330 *status |= FE_HAS_VITERBI;
332 if (sync & 8)
333 *status |= FE_HAS_SYNC;
335 if ((sync & 0x1f) == 0x1f)
336 *status |= FE_HAS_LOCK;
338 return 0;
341 static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber)
343 struct ves1x93_state* state = fe->demodulator_priv;
345 *ber = ves1x93_readreg (state, 0x15);
346 *ber |= (ves1x93_readreg (state, 0x16) << 8);
347 *ber |= ((ves1x93_readreg (state, 0x17) & 0x0F) << 16);
348 *ber *= 10;
350 return 0;
353 static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength)
355 struct ves1x93_state* state = fe->demodulator_priv;
357 u8 signal = ~ves1x93_readreg (state, 0x0b);
358 *strength = (signal << 8) | signal;
360 return 0;
363 static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr)
365 struct ves1x93_state* state = fe->demodulator_priv;
367 u8 _snr = ~ves1x93_readreg (state, 0x1c);
368 *snr = (_snr << 8) | _snr;
370 return 0;
373 static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
375 struct ves1x93_state* state = fe->demodulator_priv;
377 *ucblocks = ves1x93_readreg (state, 0x18) & 0x7f;
379 if (*ucblocks == 0x7f)
380 *ucblocks = 0xffffffff; /* counter overflow... */
382 ves1x93_writereg (state, 0x18, 0x00); /* reset the counter */
383 ves1x93_writereg (state, 0x18, 0x80); /* dto. */
385 return 0;
388 static int ves1x93_set_frontend(struct dvb_frontend *fe)
390 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
391 struct ves1x93_state* state = fe->demodulator_priv;
393 if (fe->ops.tuner_ops.set_params) {
394 fe->ops.tuner_ops.set_params(fe);
395 if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
397 ves1x93_set_inversion (state, p->inversion);
398 ves1x93_set_fec(state, p->fec_inner);
399 ves1x93_set_symbolrate(state, p->symbol_rate);
400 state->inversion = p->inversion;
401 state->frequency = p->frequency;
403 return 0;
406 static int ves1x93_get_frontend(struct dvb_frontend *fe)
408 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
409 struct ves1x93_state* state = fe->demodulator_priv;
410 int afc;
412 afc = ((int)((char)(ves1x93_readreg (state, 0x0a) << 1)))/2;
413 afc = (afc * (int)(p->symbol_rate/1000/8))/16;
415 p->frequency = state->frequency - afc;
418 * inversion indicator is only valid
419 * if auto inversion was used
421 if (state->inversion == INVERSION_AUTO)
422 p->inversion = (ves1x93_readreg (state, 0x0f) & 2) ?
423 INVERSION_OFF : INVERSION_ON;
424 p->fec_inner = ves1x93_get_fec(state);
425 /* XXX FIXME: timing offset !! */
427 return 0;
430 static int ves1x93_sleep(struct dvb_frontend* fe)
432 struct ves1x93_state* state = fe->demodulator_priv;
434 return ves1x93_writereg (state, 0x00, 0x08);
437 static void ves1x93_release(struct dvb_frontend* fe)
439 struct ves1x93_state* state = fe->demodulator_priv;
440 kfree(state);
443 static int ves1x93_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
445 struct ves1x93_state* state = fe->demodulator_priv;
447 if (enable) {
448 return ves1x93_writereg(state, 0x00, 0x11);
449 } else {
450 return ves1x93_writereg(state, 0x00, 0x01);
454 static struct dvb_frontend_ops ves1x93_ops;
456 struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
457 struct i2c_adapter* i2c)
459 struct ves1x93_state* state = NULL;
460 u8 identity;
462 /* allocate memory for the internal state */
463 state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
464 if (state == NULL) goto error;
466 /* setup the state */
467 state->config = config;
468 state->i2c = i2c;
469 state->inversion = INVERSION_OFF;
471 /* check if the demod is there + identify it */
472 identity = ves1x93_readreg(state, 0x1e);
473 switch (identity) {
474 case 0xdc: /* VES1893A rev1 */
475 printk("ves1x93: Detected ves1893a rev1\n");
476 state->demod_type = DEMOD_VES1893;
477 state->init_1x93_tab = init_1893_tab;
478 state->init_1x93_wtab = init_1893_wtab;
479 state->tab_size = sizeof(init_1893_tab);
480 break;
482 case 0xdd: /* VES1893A rev2 */
483 printk("ves1x93: Detected ves1893a rev2\n");
484 state->demod_type = DEMOD_VES1893;
485 state->init_1x93_tab = init_1893_tab;
486 state->init_1x93_wtab = init_1893_wtab;
487 state->tab_size = sizeof(init_1893_tab);
488 break;
490 case 0xde: /* VES1993 */
491 printk("ves1x93: Detected ves1993\n");
492 state->demod_type = DEMOD_VES1993;
493 state->init_1x93_tab = init_1993_tab;
494 state->init_1x93_wtab = init_1993_wtab;
495 state->tab_size = sizeof(init_1993_tab);
496 break;
498 default:
499 goto error;
502 /* create dvb_frontend */
503 memcpy(&state->frontend.ops, &ves1x93_ops, sizeof(struct dvb_frontend_ops));
504 state->frontend.demodulator_priv = state;
505 return &state->frontend;
507 error:
508 kfree(state);
509 return NULL;
512 static struct dvb_frontend_ops ves1x93_ops = {
513 .delsys = { SYS_DVBS },
514 .info = {
515 .name = "VLSI VES1x93 DVB-S",
516 .frequency_min = 950000,
517 .frequency_max = 2150000,
518 .frequency_stepsize = 125, /* kHz for QPSK frontends */
519 .frequency_tolerance = 29500,
520 .symbol_rate_min = 1000000,
521 .symbol_rate_max = 45000000,
522 /* .symbol_rate_tolerance = ???,*/
523 .caps = FE_CAN_INVERSION_AUTO |
524 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
525 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
526 FE_CAN_QPSK
529 .release = ves1x93_release,
531 .init = ves1x93_init,
532 .sleep = ves1x93_sleep,
533 .i2c_gate_ctrl = ves1x93_i2c_gate_ctrl,
535 .set_frontend = ves1x93_set_frontend,
536 .get_frontend = ves1x93_get_frontend,
538 .read_status = ves1x93_read_status,
539 .read_ber = ves1x93_read_ber,
540 .read_signal_strength = ves1x93_read_signal_strength,
541 .read_snr = ves1x93_read_snr,
542 .read_ucblocks = ves1x93_read_ucblocks,
544 .set_voltage = ves1x93_set_voltage,
547 module_param(debug, int, 0644);
549 MODULE_DESCRIPTION("VLSI VES1x93 DVB-S Demodulator driver");
550 MODULE_AUTHOR("Ralph Metzler");
551 MODULE_LICENSE("GPL");
553 EXPORT_SYMBOL(ves1x93_attach);