drivers/media/radio/radio-gemtek.c

   1 /*
   2  * GemTek radio card driver
   3  *
   4  * Copyright 1998 Jonas Munsin <jmunsin@iki.fi>
   5  *
   6  * GemTek hasn't released any specs on the card, so the protocol had to
   7  * be reverse engineered with dosemu.
   8  *
   9  * Besides the protocol changes, this is mostly a copy of:
  10  *
  11  *    RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff
  12  *
  13  *    Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
  14  *    Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk>
  15  *    Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
  16  *
  17  * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com>
  18  * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
  19  *
  20  * Note: this card seems to swap the left and right audio channels!
  21  *
  22  * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
  23  */
  24
  25 #include <linux/module.h>       /* Modules                      */
  26 #include <linux/init.h>         /* Initdata                     */
  27 #include <linux/ioport.h>       /* request_region               */
  28 #include <linux/delay.h>        /* udelay                       */
  29 #include <linux/videodev2.h>    /* kernel radio structs         */
  30 #include <linux/mutex.h>
  31 #include <linux/io.h>           /* outb, outb_p                 */
  32 #include <linux/pnp.h>
  33 #include <linux/slab.h>
  34 #include <media/v4l2-ioctl.h>
  35 #include <media/v4l2-device.h>
  36 #include "radio-isa.h"
  37
  38 /*
  39  * Module info.
  40  */
  41
  42 MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>");
  43 MODULE_DESCRIPTION("A driver for the GemTek Radio card.");
  44 MODULE_LICENSE("GPL");
  45 MODULE_VERSION("1.0.0");
  46
  47 /*
  48  * Module params.
  49  */
  50
  51 #ifndef CONFIG_RADIO_GEMTEK_PORT
  52 #define CONFIG_RADIO_GEMTEK_PORT -1
  53 #endif
  54 #ifndef CONFIG_RADIO_GEMTEK_PROBE
  55 #define CONFIG_RADIO_GEMTEK_PROBE 1
  56 #endif
  57
  58 #define GEMTEK_MAX 4
  59
  60 static bool probe = CONFIG_RADIO_GEMTEK_PROBE;
  61 static bool hardmute;
  62 static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT,
  63                               [1 ... (GEMTEK_MAX - 1)] = -1 };
  64 static int radio_nr[GEMTEK_MAX] = { [0 ... (GEMTEK_MAX - 1)] = -1 };
  65
  66 module_param(probe, bool, 0444);
  67 MODULE_PARM_DESC(probe, "Enable automatic device probing.");
  68
  69 module_param(hardmute, bool, 0644);
  70 MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may "
  71          "reduce static noise.");
  72
  73 module_param_array(io, int, NULL, 0444);
  74 MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic "
  75          "probing is disabled or fails. The most common I/O ports are: 0x20c "
  76          "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to "
  77          "work for the combined sound/radiocard).");
  78
  79 module_param_array(radio_nr, int, NULL, 0444);
  80 MODULE_PARM_DESC(radio_nr, "Radio device numbers");
  81
  82 /*
  83  * Frequency calculation constants.  Intermediate frequency 10.52 MHz (nominal
  84  * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz).
  85  */
  86 #define FSCALE          8
  87 #define IF_OFFSET       ((unsigned int)(10.52 * 16000 * (1<<FSCALE)))
  88 #define REF_FREQ        ((unsigned int)(6.39 * 16 * (1<<FSCALE)))
  89
  90 #define GEMTEK_CK               0x01    /* Clock signal                 */
  91 #define GEMTEK_DA               0x02    /* Serial data                  */
  92 #define GEMTEK_CE               0x04    /* Chip enable                  */
  93 #define GEMTEK_NS               0x08    /* No signal                    */
  94 #define GEMTEK_MT               0x10    /* Line mute                    */
  95 #define GEMTEK_STDF_3_125_KHZ   0x01    /* Standard frequency 3.125 kHz */
  96 #define GEMTEK_PLL_OFF          0x07    /* PLL off                      */
  97
  98 #define BU2614_BUS_SIZE 32      /* BU2614 / BU2614FS bus size           */
  99
 100 #define SHORT_DELAY 5           /* usec */
 101 #define LONG_DELAY 75           /* usec */
 102
 103 struct gemtek {
 104         struct radio_isa_card isa;
 105         bool muted;
 106         u32 bu2614data;
 107 };
 108
 109 #define BU2614_FREQ_BITS        16 /* D0..D15, Frequency data           */
 110 #define BU2614_PORT_BITS        3 /* P0..P2, Output port control data   */
 111 #define BU2614_VOID_BITS        4 /* unused                             */
 112 #define BU2614_FMES_BITS        1 /* CT, Frequency measurement beginning data */
 113 #define BU2614_STDF_BITS        3 /* R0..R2, Standard frequency data    */
 114 #define BU2614_SWIN_BITS        1 /* S, Switch between FMIN / AMIN      */
 115 #define BU2614_SWAL_BITS        1 /* PS, Swallow counter division (AMIN only)*/
 116 #define BU2614_VOID2_BITS       1 /* unused                             */
 117 #define BU2614_FMUN_BITS        1 /* GT, Frequency measurement time & unlock */
 118 #define BU2614_TEST_BITS        1 /* TS, Test data is input             */
 119
 120 #define BU2614_FREQ_SHIFT       0
 121 #define BU2614_PORT_SHIFT       (BU2614_FREQ_BITS + BU2614_FREQ_SHIFT)
 122 #define BU2614_VOID_SHIFT       (BU2614_PORT_BITS + BU2614_PORT_SHIFT)
 123 #define BU2614_FMES_SHIFT       (BU2614_VOID_BITS + BU2614_VOID_SHIFT)
 124 #define BU2614_STDF_SHIFT       (BU2614_FMES_BITS + BU2614_FMES_SHIFT)
 125 #define BU2614_SWIN_SHIFT       (BU2614_STDF_BITS + BU2614_STDF_SHIFT)
 126 #define BU2614_SWAL_SHIFT       (BU2614_SWIN_BITS + BU2614_SWIN_SHIFT)
 127 #define BU2614_VOID2_SHIFT      (BU2614_SWAL_BITS + BU2614_SWAL_SHIFT)
 128 #define BU2614_FMUN_SHIFT       (BU2614_VOID2_BITS + BU2614_VOID2_SHIFT)
 129 #define BU2614_TEST_SHIFT       (BU2614_FMUN_BITS + BU2614_FMUN_SHIFT)
 130
 131 #define MKMASK(field)   (((1<<BU2614_##field##_BITS) - 1) << \
 132                         BU2614_##field##_SHIFT)
 133 #define BU2614_PORT_MASK        MKMASK(PORT)
 134 #define BU2614_FREQ_MASK        MKMASK(FREQ)
 135 #define BU2614_VOID_MASK        MKMASK(VOID)
 136 #define BU2614_FMES_MASK        MKMASK(FMES)
 137 #define BU2614_STDF_MASK        MKMASK(STDF)
 138 #define BU2614_SWIN_MASK        MKMASK(SWIN)
 139 #define BU2614_SWAL_MASK        MKMASK(SWAL)
 140 #define BU2614_VOID2_MASK       MKMASK(VOID2)
 141 #define BU2614_FMUN_MASK        MKMASK(FMUN)
 142 #define BU2614_TEST_MASK        MKMASK(TEST)
 143
 144 /*
 145  * Set data which will be sent to BU2614FS.
 146  */
 147 #define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \
 148         ((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT))
 149
 150 /*
 151  * Transmit settings to BU2614FS over GemTek IC.
 152  */
 153 static void gemtek_bu2614_transmit(struct gemtek *gt)
 154 {
 155         struct radio_isa_card *isa = &gt->isa;
 156         int i, bit, q, mute;
 157
 158         mute = gt->muted ? GEMTEK_MT : 0x00;
 159
 160         outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io);
 161         udelay(LONG_DELAY);
 162
 163         for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) {
 164                 bit = (q & 1) ? GEMTEK_DA : 0;
 165                 outb_p(mute | GEMTEK_CE | bit, isa->io);
 166                 udelay(SHORT_DELAY);
 167                 outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io);
 168                 udelay(SHORT_DELAY);
 169         }
 170
 171         outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io);
 172         udelay(SHORT_DELAY);
 173 }
 174
 175 /*
 176  * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected).
 177  */
 178 static unsigned long gemtek_convfreq(unsigned long freq)
 179 {
 180         return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ;
 181 }
 182
 183 static struct radio_isa_card *gemtek_alloc(void)
 184 {
 185         struct gemtek *gt = kzalloc(sizeof(*gt), GFP_KERNEL);
 186
 187         if (gt)
 188                 gt->muted = true;
 189         return gt ? &gt->isa : NULL;
 190 }
 191
 192 /*
 193  * Set FM-frequency.
 194  */
 195 static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq)
 196 {
 197         struct gemtek *gt = container_of(isa, struct gemtek, isa);
 198
 199         if (hardmute && gt->muted)
 200                 return 0;
 201
 202         gemtek_bu2614_set(gt, BU2614_PORT, 0);
 203         gemtek_bu2614_set(gt, BU2614_FMES, 0);
 204         gemtek_bu2614_set(gt, BU2614_SWIN, 0);  /* FM-mode      */
 205         gemtek_bu2614_set(gt, BU2614_SWAL, 0);
 206         gemtek_bu2614_set(gt, BU2614_FMUN, 1);  /* GT bit set   */
 207         gemtek_bu2614_set(gt, BU2614_TEST, 0);
 208         gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ);
 209         gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq));
 210         gemtek_bu2614_transmit(gt);
 211         return 0;
 212 }
 213
 214 /*
 215  * Set mute flag.
 216  */
 217 static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
 218 {
 219         struct gemtek *gt = container_of(isa, struct gemtek, isa);
 220         int i;
 221
 222         gt->muted = mute;
 223         if (hardmute) {
 224                 if (!mute)
 225                         return gemtek_s_frequency(isa, isa->freq);
 226
 227                 /* Turn off PLL, disable data output */
 228                 gemtek_bu2614_set(gt, BU2614_PORT, 0);
 229                 gemtek_bu2614_set(gt, BU2614_FMES, 0);  /* CT bit off   */
 230                 gemtek_bu2614_set(gt, BU2614_SWIN, 0);  /* FM-mode      */
 231                 gemtek_bu2614_set(gt, BU2614_SWAL, 0);
 232                 gemtek_bu2614_set(gt, BU2614_FMUN, 0);  /* GT bit off   */
 233                 gemtek_bu2614_set(gt, BU2614_TEST, 0);
 234                 gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF);
 235                 gemtek_bu2614_set(gt, BU2614_FREQ, 0);
 236                 gemtek_bu2614_transmit(gt);
 237                 return 0;
 238         }
 239
 240         /* Read bus contents (CE, CK and DA). */
 241         i = inb_p(isa->io);
 242         /* Write it back with mute flag set. */
 243         outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io);
 244         udelay(SHORT_DELAY);
 245         return 0;
 246 }
 247
 248 static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa)
 249 {
 250         if (inb_p(isa->io) & GEMTEK_NS)
 251                 return V4L2_TUNER_SUB_MONO;
 252         return V4L2_TUNER_SUB_STEREO;
 253 }
 254
 255 /*
 256  * Check if requested card acts like GemTek Radio card.
 257  */
 258 static bool gemtek_probe(struct radio_isa_card *isa, int io)
 259 {
 260         int i, q;
 261
 262         q = inb_p(io);  /* Read bus contents before probing. */
 263         /* Try to turn on CE, CK and DA respectively and check if card responds
 264            properly. */
 265         for (i = 0; i < 3; ++i) {
 266                 outb_p(1 << i, io);
 267                 udelay(SHORT_DELAY);
 268
 269                 if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5))))
 270                         return false;
 271         }
 272         outb_p(q >> 5, io);     /* Write bus contents back. */
 273         udelay(SHORT_DELAY);
 274         return true;
 275 }
 276
 277 static const struct radio_isa_ops gemtek_ops = {
 278         .alloc = gemtek_alloc,
 279         .probe = gemtek_probe,
 280         .s_mute_volume = gemtek_s_mute_volume,
 281         .s_frequency = gemtek_s_frequency,
 282         .g_rxsubchans = gemtek_g_rxsubchans,
 283 };
 284
 285 static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c };
 286
 287 #ifdef CONFIG_PNP
 288 static struct pnp_device_id gemtek_pnp_devices[] = {
 289         /* AOpen FX-3D/Pro Radio */
 290         {.id = "ADS7183", .driver_data = 0},
 291         {.id = ""}
 292 };
 293
 294 MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices);
 295 #endif
 296
 297 static struct radio_isa_driver gemtek_driver = {
 298         .driver = {
 299                 .match          = radio_isa_match,
 300                 .probe          = radio_isa_probe,
 301                 .remove         = radio_isa_remove,
 302                 .driver         = {
 303                         .name   = "radio-gemtek",
 304                 },
 305         },
 306 #ifdef CONFIG_PNP
 307         .pnp_driver = {
 308                 .name           = "radio-gemtek",
 309                 .id_table       = gemtek_pnp_devices,
 310                 .probe          = radio_isa_pnp_probe,
 311                 .remove         = radio_isa_pnp_remove,
 312         },
 313 #endif
 314         .io_params = io,
 315         .radio_nr_params = radio_nr,
 316         .io_ports = gemtek_ioports,
 317         .num_of_io_ports = ARRAY_SIZE(gemtek_ioports),
 318         .region_size = 1,
 319         .card = "GemTek Radio",
 320         .ops = &gemtek_ops,
 321         .has_stereo = true,
 322 };
 323
 324 static int __init gemtek_init(void)
 325 {
 326         gemtek_driver.probe = probe;
 327 #ifdef CONFIG_PNP
 328         pnp_register_driver(&gemtek_driver.pnp_driver);
 329 #endif
 330         return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX);
 331 }
 332
 333 static void __exit gemtek_exit(void)
 334 {
 335         hardmute = 1;   /* Turn off PLL */
 336 #ifdef CONFIG_PNP
 337         pnp_unregister_driver(&gemtek_driver.pnp_driver);
 338 #endif
 339         isa_unregister_driver(&gemtek_driver.driver);
 340 }
 341
 342 module_init(gemtek_init);
 343 module_exit(gemtek_exit);