PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / media / usb / cx231xx / cx231xx-pcb-cfg.h
blobb3c6190e0c697a61af9fc41a04365cd71f37e14b
1 /*
2 cx231xx-pcb-cfg.h - driver for Conexant
3 Cx23100/101/102 USB video capture devices
5 Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 #ifndef _PCB_CONFIG_H_
23 #define _PCB_CONFIG_H_
25 #include <linux/init.h>
26 #include <linux/module.h>
28 /***************************************************************************
29 * Class Information *
30 ***************************************************************************/
31 #define CLASS_DEFAULT 0xFF
33 enum VENDOR_REQUEST_TYPE {
34 /* Set/Get I2C */
35 VRT_SET_I2C0 = 0x0,
36 VRT_SET_I2C1 = 0x1,
37 VRT_SET_I2C2 = 0x2,
38 VRT_GET_I2C0 = 0x4,
39 VRT_GET_I2C1 = 0x5,
40 VRT_GET_I2C2 = 0x6,
42 /* Set/Get GPIO */
43 VRT_SET_GPIO = 0x8,
44 VRT_GET_GPIO = 0x9,
46 /* Set/Get GPIE */
47 VRT_SET_GPIE = 0xA,
48 VRT_GET_GPIE = 0xB,
50 /* Set/Get Register Control/Status */
51 VRT_SET_REGISTER = 0xC,
52 VRT_GET_REGISTER = 0xD,
54 /* Get Extended Compat ID Descriptor */
55 VRT_GET_EXTCID_DESC = 0xFF,
58 enum BYTE_ENABLE_MASK {
59 ENABLE_ONE_BYTE = 0x1,
60 ENABLE_TWE_BYTE = 0x3,
61 ENABLE_THREE_BYTE = 0x7,
62 ENABLE_FOUR_BYTE = 0xF,
65 #define SPEED_MASK 0x1
66 enum USB_SPEED{
67 FULL_SPEED = 0x0, /* 0: full speed */
68 HIGH_SPEED = 0x1 /* 1: high speed */
71 #define TS_MASK 0x6
72 enum TS_PORT{
73 NO_TS_PORT = 0x0, /* 2'b00: Neither port used. PCB not a Hybrid,
74 only offers Analog TV or Video */
75 TS1_PORT = 0x4, /* 2'b10: TS1 Input (Hybrid mode :
76 Digital or External Analog/Compressed source) */
77 TS1_TS2_PORT = 0x6, /* 2'b11: TS1 & TS2 Inputs
78 (Dual inputs from Digital and/or
79 External Analog/Compressed sources) */
80 TS1_EXT_CLOCK = 0x6, /* 2'b11: TS1 & TS2 as selector
81 to external clock */
82 TS1VIP_TS2_PORT = 0x2 /* 2'b01: TS1 used as 656/VIP Output,
83 TS2 Input (from Compressor) */
86 #define EAVP_MASK 0x8
87 enum EAV_PRESENT{
88 NO_EXTERNAL_AV = 0x0, /* 0: No External A/V inputs
89 (no need for i2s blcok),
90 Analog Tuner must be present */
91 EXTERNAL_AV = 0x8 /* 1: External A/V inputs
92 present (requires i2s blk) */
95 #define ATM_MASK 0x30
96 enum AT_MODE{
97 DIF_TUNER = 0x30, /* 2'b11: IF Tuner (requires use of DIF) */
98 BASEBAND_SOUND = 0x20, /* 2'b10: Baseband Composite &
99 Sound-IF Signals present */
100 NO_TUNER = 0x10 /* 2'b0x: No Analog Tuner present */
103 #define PWR_SEL_MASK 0x40
104 enum POWE_TYPE{
105 SELF_POWER = 0x0, /* 0: self power */
106 BUS_POWER = 0x40 /* 1: bus power */
109 enum USB_POWE_TYPE{
110 USB_SELF_POWER = 0,
111 USB_BUS_POWER
114 #define BO_0_MASK 0x80
115 enum AVDEC_STATUS{
116 AVDEC_DISABLE = 0x0, /* 0: A/V Decoder Disabled */
117 AVDEC_ENABLE = 0x80 /* 1: A/V Decoder Enabled */
120 #define BO_1_MASK 0x100
122 #define BUSPOWER_MASK 0xC4 /* for Polaris spec 0.8 */
123 #define SELFPOWER_MASK 0x86
125 /***************************************************************************/
126 #define NOT_DECIDE_YET 0xFE
127 #define NOT_SUPPORTED 0xFF
129 /***************************************************************************
130 * for mod field use *
131 ***************************************************************************/
132 #define MOD_DIGITAL 0x1
133 #define MOD_ANALOG 0x2
134 #define MOD_DIF 0x4
135 #define MOD_EXTERNAL 0x8
136 #define CAP_ALL_MOD 0x0f
138 /***************************************************************************
139 * source define *
140 ***************************************************************************/
141 #define SOURCE_DIGITAL 0x1
142 #define SOURCE_ANALOG 0x2
143 #define SOURCE_DIF 0x4
144 #define SOURCE_EXTERNAL 0x8
145 #define SOURCE_TS_BDA 0x10
146 #define SOURCE_TS_ENCODE 0x20
147 #define SOURCE_TS_EXTERNAL 0x40
149 /***************************************************************************
150 * interface information define *
151 ***************************************************************************/
152 struct INTERFACE_INFO {
153 u8 interrupt_index;
154 u8 ts1_index;
155 u8 ts2_index;
156 u8 audio_index;
157 u8 video_index;
158 u8 vanc_index; /* VBI */
159 u8 hanc_index; /* Sliced CC */
160 u8 ir_index;
163 enum INDEX_INTERFACE_INFO{
164 INDEX_INTERRUPT = 0x0,
165 INDEX_TS1,
166 INDEX_TS2,
167 INDEX_AUDIO,
168 INDEX_VIDEO,
169 INDEX_VANC,
170 INDEX_HANC,
171 INDEX_IR,
174 /***************************************************************************
175 * configuration information define *
176 ***************************************************************************/
177 struct CONFIG_INFO {
178 u8 config_index;
179 struct INTERFACE_INFO interface_info;
182 struct pcb_config {
183 u8 index;
184 u8 type; /* bus power or self power,
185 self power--0, bus_power--1 */
186 u8 speed; /* usb speed, 2.0--1, 1.1--0 */
187 u8 mode; /* digital , anlog, dif or external A/V */
188 u32 ts1_source; /* three source -- BDA,External,encode */
189 u32 ts2_source;
190 u32 analog_source;
191 u8 digital_index; /* bus-power used */
192 u8 analog_index; /* bus-power used */
193 u8 dif_index; /* bus-power used */
194 u8 external_index; /* bus-power used */
195 u8 config_num; /* current config num, 0,1,2,
196 for self-power, always 0 */
197 struct CONFIG_INFO hs_config_info[3];
198 struct CONFIG_INFO fs_config_info[3];
201 enum INDEX_PCB_CONFIG{
202 INDEX_SELFPOWER_DIGITAL_ONLY = 0x0,
203 INDEX_SELFPOWER_DUAL_DIGITAL,
204 INDEX_SELFPOWER_ANALOG_ONLY,
205 INDEX_SELFPOWER_DUAL,
206 INDEX_SELFPOWER_TRIPLE,
207 INDEX_SELFPOWER_COMPRESSOR,
208 INDEX_BUSPOWER_DIGITAL_ONLY,
209 INDEX_BUSPOWER_ANALOG_ONLY,
210 INDEX_BUSPOWER_DIF_ONLY,
211 INDEX_BUSPOWER_EXTERNAL_ONLY,
212 INDEX_BUSPOWER_EXTERNAL_ANALOG,
213 INDEX_BUSPOWER_EXTERNAL_DIF,
214 INDEX_BUSPOWER_EXTERNAL_DIGITAL,
215 INDEX_BUSPOWER_DIGITAL_ANALOG,
216 INDEX_BUSPOWER_DIGITAL_DIF,
217 INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL,
218 INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL,
221 /***************************************************************************/
222 struct cx231xx;
224 u32 initialize_cx231xx(struct cx231xx *p_dev);
226 #endif