drivers/media/usb/dvb-usb/friio.c

   1 /* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
   2  *
   3  * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
   4  *
   5  * This module is based off the the gl861 and vp702x modules.
   6  *
   7  * This program is free software; you can redistribute it and/or modify it
   8  * under the terms of the GNU General Public License as published by the Free
   9  * Software Foundation, version 2.
  10  *
  11  * see Documentation/dvb/README.dvb-usb for more information
  12  */
  13 #include "friio.h"
  14
  15 /* debug */
  16 int dvb_usb_friio_debug;
  17 module_param_named(debug, dvb_usb_friio_debug, int, 0644);
  18 MODULE_PARM_DESC(debug,
  19                  "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))."
  20                  DVB_USB_DEBUG_STATUS);
  21
  22 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
  23
  24 /**
  25  * Indirect I2C access to the PLL via FE.
  26  * whole I2C protocol data to the PLL is sent via the FE's I2C register.
  27  * This is done by a control msg to the FE with the I2C data accompanied, and
  28  * a specific USB request number is assigned for that purpose.
  29  *
  30  * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE).
  31  * TODO: refoctored, smarter i2c functions.
  32  */
  33 static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr,
  34                                   u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
  35 {
  36         u16 index = wbuf[0];    /* must be JDVBT90502_2ND_I2C_REG(=0xFE) */
  37         u16 value = addr << (8 + 1);
  38         int wo = (rbuf == NULL || rlen == 0);   /* write only */
  39         u8 req, type;
  40
  41         deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n",
  42                  wbuf[1], wbuf[0], wlen - 1);
  43
  44         if (wo && wlen >= 2) {
  45                 req = GL861_REQ_I2C_DATA_CTRL_WRITE;
  46                 type = GL861_WRITE;
  47                 udelay(20);
  48                 return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
  49                                        req, type, value, index,
  50                                        &wbuf[1], wlen - 1, 2000);
  51         }
  52
  53         deb_xfer("not supported ctrl-msg, aborting.");
  54         return -EINVAL;
  55 }
  56
  57 /* normal I2C access (without extra data arguments).
  58  * write to the register wbuf[0] at I2C address addr with the value wbuf[1],
  59  *  or read from the register wbuf[0].
  60  * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3
  61  */
  62 static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
  63                          u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
  64 {
  65         u16 index;
  66         u16 value = addr << (8 + 1);
  67         int wo = (rbuf == NULL || rlen == 0);   /* write-only */
  68         u8 req, type;
  69         unsigned int pipe;
  70
  71         /* special case for the indirect I2C access to the PLL via FE, */
  72         if (addr == friio_fe_config.demod_address &&
  73             wbuf[0] == JDVBT90502_2ND_I2C_REG)
  74                 return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen);
  75
  76         if (wo) {
  77                 req = GL861_REQ_I2C_WRITE;
  78                 type = GL861_WRITE;
  79                 pipe = usb_sndctrlpipe(d->udev, 0);
  80         } else {                /* rw */
  81                 req = GL861_REQ_I2C_READ;
  82                 type = GL861_READ;
  83                 pipe = usb_rcvctrlpipe(d->udev, 0);
  84         }
  85
  86         switch (wlen) {
  87         case 1:
  88                 index = wbuf[0];
  89                 break;
  90         case 2:
  91                 index = wbuf[0];
  92                 value = value + wbuf[1];
  93                 break;
  94         case 3:
  95                 /* special case for 16bit register-address */
  96                 index = (wbuf[2] << 8) | wbuf[0];
  97                 value = value + wbuf[1];
  98                 break;
  99         default:
 100                 deb_xfer("wlen = %x, aborting.", wlen);
 101                 return -EINVAL;
 102         }
 103         msleep(1);
 104         return usb_control_msg(d->udev, pipe, req, type,
 105                                value, index, rbuf, rlen, 2000);
 106 }
 107
 108 /* I2C */
 109 static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 110                           int num)
 111 {
 112         struct dvb_usb_device *d = i2c_get_adapdata(adap);
 113         int i;
 114
 115
 116         if (num > 2)
 117                 return -EINVAL;
 118
 119         if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 120                 return -EAGAIN;
 121
 122         for (i = 0; i < num; i++) {
 123                 /* write/read request */
 124                 if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
 125                         if (gl861_i2c_msg(d, msg[i].addr,
 126                                           msg[i].buf, msg[i].len,
 127                                           msg[i + 1].buf, msg[i + 1].len) < 0)
 128                                 break;
 129                         i++;
 130                 } else
 131                         if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
 132                                           msg[i].len, NULL, 0) < 0)
 133                                 break;
 134         }
 135
 136         mutex_unlock(&d->i2c_mutex);
 137         return i;
 138 }
 139
 140 static u32 gl861_i2c_func(struct i2c_adapter *adapter)
 141 {
 142         return I2C_FUNC_I2C;
 143 }
 144
 145 static int friio_ext_ctl(struct dvb_usb_adapter *adap,
 146                          u32 sat_color, int lnb_on)
 147 {
 148         int i;
 149         int ret;
 150         struct i2c_msg msg;
 151         u8 *buf;
 152         u32 mask;
 153         u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0;
 154
 155         buf = kmalloc(2, GFP_KERNEL);
 156         if (!buf)
 157                 return -ENOMEM;
 158
 159         msg.addr = 0x00;
 160         msg.flags = 0;
 161         msg.len = 2;
 162         msg.buf = buf;
 163
 164         buf[0] = 0x00;
 165
 166         /* send 2bit header (&B10) */
 167         buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE;
 168         ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
 169         buf[1] |= FRIIO_CTL_CLK;
 170         ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
 171
 172         buf[1] = lnb | FRIIO_CTL_STROBE;
 173         ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
 174         buf[1] |= FRIIO_CTL_CLK;
 175         ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
 176
 177         /* send 32bit(satur, R, G, B) data in serial */
 178         mask = 1 << 31;
 179         for (i = 0; i < 32; i++) {
 180                 buf[1] = lnb | FRIIO_CTL_STROBE;
 181                 if (sat_color & mask)
 182                         buf[1] |= FRIIO_CTL_LED;
 183                 ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
 184                 buf[1] |= FRIIO_CTL_CLK;
 185                 ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
 186                 mask >>= 1;
 187         }
 188
 189         /* set the strobe off */
 190         buf[1] = lnb;
 191         ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
 192         buf[1] |= FRIIO_CTL_CLK;
 193         ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
 194
 195         kfree(buf);
 196         return (ret == 70);
 197 }
 198
 199
 200 static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
 201
 202 /* TODO: move these init cmds to the FE's init routine? */
 203 static u8 streaming_init_cmds[][2] = {
 204         {0x33, 0x08},
 205         {0x37, 0x40},
 206         {0x3A, 0x1F},
 207         {0x3B, 0xFF},
 208         {0x3C, 0x1F},
 209         {0x3D, 0xFF},
 210         {0x38, 0x00},
 211         {0x35, 0x00},
 212         {0x39, 0x00},
 213         {0x36, 0x00},
 214 };
 215 static int cmdlen = sizeof(streaming_init_cmds) / 2;
 216
 217 /*
 218  * Command sequence in this init function is a replay
 219  *  of the captured USB commands from the Windows proprietary driver.
 220  */
 221 static int friio_initialize(struct dvb_usb_device *d)
 222 {
 223         int ret;
 224         int i;
 225         int retry = 0;
 226         u8 *rbuf, *wbuf;
 227
 228         deb_info("%s called.\n", __func__);
 229
 230         wbuf = kmalloc(3, GFP_KERNEL);
 231         if (!wbuf)
 232                 return -ENOMEM;
 233
 234         rbuf = kmalloc(2, GFP_KERNEL);
 235         if (!rbuf) {
 236                 kfree(wbuf);
 237                 return -ENOMEM;
 238         }
 239
 240         /* use gl861_i2c_msg instead of gl861_i2c_xfer(), */
 241         /* because the i2c device is not set up yet. */
 242         wbuf[0] = 0x11;
 243         wbuf[1] = 0x02;
 244         ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
 245         if (ret < 0)
 246                 goto error;
 247         msleep(2);
 248
 249         wbuf[0] = 0x11;
 250         wbuf[1] = 0x00;
 251         ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
 252         if (ret < 0)
 253                 goto error;
 254         msleep(1);
 255
 256         /* following msgs should be in the FE's init code? */
 257         /* cmd sequence to identify the device type? (friio black/white) */
 258         wbuf[0] = 0x03;
 259         wbuf[1] = 0x80;
 260         /* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */
 261         ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
 262                               GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
 263                               0x1200, 0x0100, wbuf, 2, 2000);
 264         if (ret < 0)
 265                 goto error;
 266
 267         msleep(2);
 268         wbuf[0] = 0x00;
 269         wbuf[2] = 0x01;         /* reg.0x0100 */
 270         wbuf[1] = 0x00;
 271         ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2);
 272         /* my Friio White returns 0xffff. */
 273         if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
 274                 goto error;
 275
 276         msleep(2);
 277         wbuf[0] = 0x03;
 278         wbuf[1] = 0x80;
 279         ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
 280                               GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
 281                               0x9000, 0x0100, wbuf, 2, 2000);
 282         if (ret < 0)
 283                 goto error;
 284
 285         msleep(2);
 286         wbuf[0] = 0x00;
 287         wbuf[2] = 0x01;         /* reg.0x0100 */
 288         wbuf[1] = 0x00;
 289         ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2);
 290         /* my Friio White returns 0xffff again. */
 291         if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
 292                 goto error;
 293
 294         msleep(1);
 295
 296 restart:
 297         /* ============ start DEMOD init cmds ================== */
 298         /* read PLL status to clear the POR bit */
 299         wbuf[0] = JDVBT90502_2ND_I2C_REG;
 300         wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1;    /* +1 for reading */
 301         ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0);
 302         if (ret < 0)
 303                 goto error;
 304
 305         msleep(5);
 306         /* note: DEMODULATOR has 16bit register-address. */
 307         wbuf[0] = 0x00;
 308         wbuf[2] = 0x01;         /* reg addr: 0x0100 */
 309         wbuf[1] = 0x00;         /* val: not used */
 310         ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1);
 311         if (ret < 0)
 312                 goto error;
 313 /*
 314         msleep(1);
 315         wbuf[0] = 0x80;
 316         wbuf[1] = 0x00;
 317         ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1);
 318         if (ret < 0)
 319                 goto error;
 320  */
 321         if (rbuf[0] & 0x80) {   /* still in PowerOnReset state? */
 322                 if (++retry > 3) {
 323                         deb_info("failed to get the correct"
 324                                  " FE demod status:0x%02x\n", rbuf[0]);
 325                         goto error;
 326                 }
 327                 msleep(100);
 328                 goto restart;
 329         }
 330
 331         /* TODO: check return value in rbuf */
 332         /* =========== end DEMOD init cmds ===================== */
 333         msleep(1);
 334
 335         wbuf[0] = 0x30;
 336         wbuf[1] = 0x04;
 337         ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
 338         if (ret < 0)
 339                 goto error;
 340
 341         msleep(2);
 342         /* following 2 cmds unnecessary? */
 343         wbuf[0] = 0x00;
 344         wbuf[1] = 0x01;
 345         ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
 346         if (ret < 0)
 347                 goto error;
 348
 349         wbuf[0] = 0x06;
 350         wbuf[1] = 0x0F;
 351         ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
 352         if (ret < 0)
 353                 goto error;
 354
 355         /* some streaming ctl cmds (maybe) */
 356         msleep(10);
 357         for (i = 0; i < cmdlen; i++) {
 358                 ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2,
 359                                     NULL, 0);
 360                 if (ret < 0)
 361                         goto error;
 362                 msleep(1);
 363         }
 364         msleep(20);
 365
 366         /* change the LED color etc. */
 367         ret = friio_streaming_ctrl(&d->adapter[0], 0);
 368         if (ret < 0)
 369                 goto error;
 370
 371         return 0;
 372
 373 error:
 374         kfree(wbuf);
 375         kfree(rbuf);
 376         deb_info("%s:ret == %d\n", __func__, ret);
 377         return -EIO;
 378 }
 379
 380 /* Callbacks for DVB USB */
 381
 382 static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 383 {
 384         int ret;
 385
 386         deb_info("%s called.(%d)\n", __func__, onoff);
 387
 388         /* set the LED color and saturation (and LNB on) */
 389         if (onoff)
 390                 ret = friio_ext_ctl(adap, 0x6400ff64, 1);
 391         else
 392                 ret = friio_ext_ctl(adap, 0x96ff00ff, 1);
 393
 394         if (ret != 1) {
 395                 deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret);
 396                 return -EREMOTEIO;
 397         }
 398         return 0;
 399 }
 400
 401 static int friio_frontend_attach(struct dvb_usb_adapter *adap)
 402 {
 403         if (friio_initialize(adap->dev) < 0)
 404                 return -EIO;
 405
 406         adap->fe_adap[0].fe = jdvbt90502_attach(adap->dev);
 407         if (adap->fe_adap[0].fe == NULL)
 408                 return -EIO;
 409
 410         return 0;
 411 }
 412
 413 /* DVB USB Driver stuff */
 414 static struct dvb_usb_device_properties friio_properties;
 415
 416 static int friio_probe(struct usb_interface *intf,
 417                        const struct usb_device_id *id)
 418 {
 419         struct dvb_usb_device *d;
 420         struct usb_host_interface *alt;
 421         int ret;
 422
 423         if (intf->num_altsetting < GL861_ALTSETTING_COUNT)
 424                 return -ENODEV;
 425
 426         alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING);
 427         if (alt == NULL) {
 428                 deb_rc("not alt found!\n");
 429                 return -ENODEV;
 430         }
 431         ret = usb_set_interface(interface_to_usbdev(intf),
 432                                 alt->desc.bInterfaceNumber,
 433                                 alt->desc.bAlternateSetting);
 434         if (ret != 0) {
 435                 deb_rc("failed to set alt-setting!\n");
 436                 return ret;
 437         }
 438
 439         ret = dvb_usb_device_init(intf, &friio_properties,
 440                                   THIS_MODULE, &d, adapter_nr);
 441         if (ret == 0)
 442                 friio_streaming_ctrl(&d->adapter[0], 1);
 443
 444         return ret;
 445 }
 446
 447
 448 struct jdvbt90502_config friio_fe_config = {
 449         .demod_address = FRIIO_DEMOD_ADDR,
 450         .pll_address = FRIIO_PLL_ADDR,
 451 };
 452
 453 static struct i2c_algorithm gl861_i2c_algo = {
 454         .master_xfer   = gl861_i2c_xfer,
 455         .functionality = gl861_i2c_func,
 456 };
 457
 458 static struct usb_device_id friio_table[] = {
 459         { USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) },
 460         { }             /* Terminating entry */
 461 };
 462 MODULE_DEVICE_TABLE(usb, friio_table);
 463
 464
 465 static struct dvb_usb_device_properties friio_properties = {
 466         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 467         .usb_ctrl = DEVICE_SPECIFIC,
 468
 469         .size_of_priv = 0,
 470
 471         .num_adapters = 1,
 472         .adapter = {
 473                 /* caps:0 =>  no pid filter, 188B TS packet */
 474                 /* GL861 has a HW pid filter, but no info available. */
 475                 {
 476                 .num_frontends = 1,
 477                 .fe = {{
 478                         .caps  = 0,
 479
 480                         .frontend_attach  = friio_frontend_attach,
 481                         .streaming_ctrl = friio_streaming_ctrl,
 482
 483                         .stream = {
 484                                 .type = USB_BULK,
 485                                 /* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */
 486                                 .count = 8,
 487                                 .endpoint = 0x01,
 488                                 .u = {
 489                                         /* GL861 has 6KB buf inside */
 490                                         .bulk = {
 491                                                 .buffersize = 16384,
 492                                         }
 493                                 }
 494                         },
 495                 }},
 496                 }
 497         },
 498         .i2c_algo = &gl861_i2c_algo,
 499
 500         .num_device_descs = 1,
 501         .devices = {
 502                 {
 503                         .name = "774 Friio ISDB-T USB2.0",
 504                         .cold_ids = { NULL },
 505                         .warm_ids = { &friio_table[0], NULL },
 506                 },
 507         }
 508 };
 509
 510 static struct usb_driver friio_driver = {
 511         .name           = "dvb_usb_friio",
 512         .probe          = friio_probe,
 513         .disconnect     = dvb_usb_device_exit,
 514         .id_table       = friio_table,
 515 };
 516
 517 module_usb_driver(friio_driver);
 518
 519 MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>");
 520 MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver");
 521 MODULE_VERSION("0.2");
 522 MODULE_LICENSE("GPL");