?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / mmc / host / pxamci.c
blob32fe11323f39e10bee30cac93daa0ba94e771939
1 /*
2 * linux/drivers/mmc/host/pxa.c - PXA MMCI driver
3 *
4 * Copyright (C) 2003 Russell King, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * This hardware is really sick:
11 * - No way to clear interrupts.
12 * - Have to turn off the clock whenever we touch the device.
13 * - Doesn't tell you how many data blocks were transferred.
14 * Yuck!
15 *
16 * 1 and 3 byte data transfers not supported
17 * max block length up to 1023
18 */
19 #include <linux/module.h>
20 #include <linux/init.h>
21 #include <linux/ioport.h>
22 #include <linux/platform_device.h>
23 #include <linux/delay.h>
24 #include <linux/interrupt.h>
25 #include <linux/dma-mapping.h>
26 #include <linux/clk.h>
27 #include <linux/err.h>
28 #include <linux/mmc/host.h>
29 #include <linux/io.h>
30 #include <linux/regulator/consumer.h>
31 #include <linux/gpio.h>
32 #include <linux/gfp.h>
33 #include <linux/of.h>
34 #include <linux/of_gpio.h>
35 #include <linux/of_device.h>
36
37 #include <asm/sizes.h>
38
39 #include <mach/hardware.h>
40 #include <mach/dma.h>
41 #include <linux/platform_data/mmc-pxamci.h>
42
43 #include "pxamci.h"
44
45 #define DRIVER_NAME "pxa2xx-mci"
46
47 #define NR_SG 1
48 #define CLKRT_OFF (~0)
49
50 #define mmc_has_26MHz() (cpu_is_pxa300() || cpu_is_pxa310() \
51 || cpu_is_pxa935())
52
53 struct pxamci_host {
54 struct mmc_host *mmc;
55 spinlock_t lock;
56 struct resource *res;
57 void __iomem *base;
58 struct clk *clk;
59 unsigned long clkrate;
60 int irq;
61 int dma;
62 unsigned int clkrt;
63 unsigned int cmdat;
64 unsigned int imask;
65 unsigned int power_mode;
66 struct pxamci_platform_data *pdata;
67
68 struct mmc_request *mrq;
69 struct mmc_command *cmd;
70 struct mmc_data *data;
71
72 dma_addr_t sg_dma;
73 struct pxa_dma_desc *sg_cpu;
74 unsigned int dma_len;
75
76 unsigned int dma_dir;
77 unsigned int dma_drcmrrx;
78 unsigned int dma_drcmrtx;
79
80 struct regulator *vcc;
81 };
82
83 static inline void pxamci_init_ocr(struct pxamci_host *host)
84 {
85 #ifdef CONFIG_REGULATOR
86 host->vcc = regulator_get_optional(mmc_dev(host->mmc), "vmmc");
87
88 if (IS_ERR(host->vcc))
89 host->vcc = NULL;
90 else {
91 host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
92 if (host->pdata && host->pdata->ocr_mask)
93 dev_warn(mmc_dev(host->mmc),
94 "ocr_mask/setpower will not be used\n");
95 }
96 #endif
97 if (host->vcc == NULL) {
98 /* fall-back to platform data */
99 host->mmc->ocr_avail = host->pdata ?
100 host->pdata->ocr_mask :
101 MMC_VDD_32_33 | MMC_VDD_33_34;
102 }
103 }
104
105 static inline int pxamci_set_power(struct pxamci_host *host,
106 unsigned char power_mode,
107 unsigned int vdd)
108 {
109 int on;
110
111 if (host->vcc) {
112 int ret;
113
114 if (power_mode == MMC_POWER_UP) {
115 ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
116 if (ret)
117 return ret;
118 } else if (power_mode == MMC_POWER_OFF) {
119 ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0);
120 if (ret)
121 return ret;
122 }
123 }
124 if (!host->vcc && host->pdata &&
125 gpio_is_valid(host->pdata->gpio_power)) {
126 on = ((1 << vdd) & host->pdata->ocr_mask);
127 gpio_set_value(host->pdata->gpio_power,
128 !!on ^ host->pdata->gpio_power_invert);
129 }
130 if (!host->vcc && host->pdata && host->pdata->setpower)
131 return host->pdata->setpower(mmc_dev(host->mmc), vdd);
132
133 return 0;
134 }
135
136 static void pxamci_stop_clock(struct pxamci_host *host)
137 {
138 if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
139 unsigned long timeout = 10000;
140 unsigned int v;
141
142 writel(STOP_CLOCK, host->base + MMC_STRPCL);
143
144 do {
145 v = readl(host->base + MMC_STAT);
146 if (!(v & STAT_CLK_EN))
147 break;
148 udelay(1);
149 } while (timeout--);
150
151 if (v & STAT_CLK_EN)
152 dev_err(mmc_dev(host->mmc), "unable to stop clock\n");
153 }
154 }
155
156 static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask)
157 {
158 unsigned long flags;
159
160 spin_lock_irqsave(&host->lock, flags);
161 host->imask &= ~mask;
162 writel(host->imask, host->base + MMC_I_MASK);
163 spin_unlock_irqrestore(&host->lock, flags);
164 }
165
166 static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
167 {
168 unsigned long flags;
169
170 spin_lock_irqsave(&host->lock, flags);
171 host->imask |= mask;
172 writel(host->imask, host->base + MMC_I_MASK);
173 spin_unlock_irqrestore(&host->lock, flags);
174 }
175
176 static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
177 {
178 unsigned int nob = data->blocks;
179 unsigned long long clks;
180 unsigned int timeout;
181 bool dalgn = 0;
182 u32 dcmd;
183 int i;
184
185 host->data = data;
186
187 if (data->flags & MMC_DATA_STREAM)
188 nob = 0xffff;
189
190 writel(nob, host->base + MMC_NOB);
191 writel(data->blksz, host->base + MMC_BLKLEN);
192
193 clks = (unsigned long long)data->timeout_ns * host->clkrate;
194 do_div(clks, 1000000000UL);
195 timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
196 writel((timeout + 255) / 256, host->base + MMC_RDTO);
197
198 if (data->flags & MMC_DATA_READ) {
199 host->dma_dir = DMA_FROM_DEVICE;
200 dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC;
201 DRCMR(host->dma_drcmrtx) = 0;
202 DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
203 } else {
204 host->dma_dir = DMA_TO_DEVICE;
205 dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG;
206 DRCMR(host->dma_drcmrrx) = 0;
207 DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
208 }
209
210 dcmd |= DCMD_BURST32 | DCMD_WIDTH1;
211
212 host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
213 host->dma_dir);
214
215 for (i = 0; i < host->dma_len; i++) {
216 unsigned int length = sg_dma_len(&data->sg[i]);
217 host->sg_cpu[i].dcmd = dcmd | length;
218 if (length & 31 && !(data->flags & MMC_DATA_READ))
219 host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN;
220 /* Not aligned to 8-byte boundary? */
221 if (sg_dma_address(&data->sg[i]) & 0x7)
222 dalgn = 1;
223 if (data->flags & MMC_DATA_READ) {
224 host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
225 host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
226 } else {
227 host->sg_cpu[i].dsadr = sg_dma_address(&data->sg[i]);
228 host->sg_cpu[i].dtadr = host->res->start + MMC_TXFIFO;
229 }
230 host->sg_cpu[i].ddadr = host->sg_dma + (i + 1) *
231 sizeof(struct pxa_dma_desc);
232 }
233 host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
234 wmb();
235
236 /*
237 * The PXA27x DMA controller encounters overhead when working with
238 * unaligned (to 8-byte boundaries) data, so switch on byte alignment
239 * mode only if we have unaligned data.
240 */
241 if (dalgn)
242 DALGN |= (1 << host->dma);
243 else
244 DALGN &= ~(1 << host->dma);
245 DDADR(host->dma) = host->sg_dma;
246
247 /*
248 * workaround for erratum #91:
249 * only start DMA now if we are doing a read,
250 * otherwise we wait until CMD/RESP has finished
251 * before starting DMA.
252 */
253 if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ)
254 DCSR(host->dma) = DCSR_RUN;
255 }
256
257 static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
258 {
259 WARN_ON(host->cmd != NULL);
260 host->cmd = cmd;
261
262 if (cmd->flags & MMC_RSP_BUSY)
263 cmdat |= CMDAT_BUSY;
264
265 #define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
266 switch (RSP_TYPE(mmc_resp_type(cmd))) {
267 case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */
268 cmdat |= CMDAT_RESP_SHORT;
269 break;
270 case RSP_TYPE(MMC_RSP_R3):
271 cmdat |= CMDAT_RESP_R3;
272 break;
273 case RSP_TYPE(MMC_RSP_R2):
274 cmdat |= CMDAT_RESP_R2;
275 break;
276 default:
277 break;
278 }
279
280 writel(cmd->opcode, host->base + MMC_CMD);
281 writel(cmd->arg >> 16, host->base + MMC_ARGH);
282 writel(cmd->arg & 0xffff, host->base + MMC_ARGL);
283 writel(cmdat, host->base + MMC_CMDAT);
284 writel(host->clkrt, host->base + MMC_CLKRT);
285
286 writel(START_CLOCK, host->base + MMC_STRPCL);
287
288 pxamci_enable_irq(host, END_CMD_RES);
289 }
290
291 static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
292 {
293 host->mrq = NULL;
294 host->cmd = NULL;
295 host->data = NULL;
296 mmc_request_done(host->mmc, mrq);
297 }
298
299 static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
300 {
301 struct mmc_command *cmd = host->cmd;
302 int i;
303 u32 v;
304
305 if (!cmd)
306 return 0;
307
308 host->cmd = NULL;
309
310 /*
311 * Did I mention this is Sick. We always need to
312 * discard the upper 8 bits of the first 16-bit word.
313 */
314 v = readl(host->base + MMC_RES) & 0xffff;
315 for (i = 0; i < 4; i++) {
316 u32 w1 = readl(host->base + MMC_RES) & 0xffff;
317 u32 w2 = readl(host->base + MMC_RES) & 0xffff;
318 cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8;
319 v = w2;
320 }
321
322 if (stat & STAT_TIME_OUT_RESPONSE) {
323 cmd->error = -ETIMEDOUT;
324 } else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
325 /*
326 * workaround for erratum #42:
327 * Intel PXA27x Family Processor Specification Update Rev 001
328 * A bogus CRC error can appear if the msb of a 136 bit
329 * response is a one.
330 */
331 if (cpu_is_pxa27x() &&
332 (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000))
333 pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
334 else
335 cmd->error = -EILSEQ;
336 }
337
338 pxamci_disable_irq(host, END_CMD_RES);
339 if (host->data && !cmd->error) {
340 pxamci_enable_irq(host, DATA_TRAN_DONE);
341 /*
342 * workaround for erratum #91, if doing write
343 * enable DMA late
344 */
345 if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE)
346 DCSR(host->dma) = DCSR_RUN;
347 } else {
348 pxamci_finish_request(host, host->mrq);
349 }
350
351 return 1;
352 }
353
354 static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
355 {
356 struct mmc_data *data = host->data;
357
358 if (!data)
359 return 0;
360
361 DCSR(host->dma) = 0;
362 dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
363 host->dma_dir);
364
365 if (stat & STAT_READ_TIME_OUT)
366 data->error = -ETIMEDOUT;
367 else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR))
368 data->error = -EILSEQ;
369
370 /*
371 * There appears to be a hardware design bug here. There seems to
372 * be no way to find out how much data was transferred to the card.
373 * This means that if there was an error on any block, we mark all
374 * data blocks as being in error.
375 */
376 if (!data->error)
377 data->bytes_xfered = data->blocks * data->blksz;
378 else
379 data->bytes_xfered = 0;
380
381 pxamci_disable_irq(host, DATA_TRAN_DONE);
382
383 host->data = NULL;
384 if (host->mrq->stop) {
385 pxamci_stop_clock(host);
386 pxamci_start_cmd(host, host->mrq->stop, host->cmdat);
387 } else {
388 pxamci_finish_request(host, host->mrq);
389 }
390
391 return 1;
392 }
393
394 static irqreturn_t pxamci_irq(int irq, void *devid)
395 {
396 struct pxamci_host *host = devid;
397 unsigned int ireg;
398 int handled = 0;
399
400 ireg = readl(host->base + MMC_I_REG) & ~readl(host->base + MMC_I_MASK);
401
402 if (ireg) {
403 unsigned stat = readl(host->base + MMC_STAT);
404
405 pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
406
407 if (ireg & END_CMD_RES)
408 handled |= pxamci_cmd_done(host, stat);
409 if (ireg & DATA_TRAN_DONE)
410 handled |= pxamci_data_done(host, stat);
411 if (ireg & SDIO_INT) {
412 mmc_signal_sdio_irq(host->mmc);
413 handled = 1;
414 }
415 }
416
417 return IRQ_RETVAL(handled);
418 }
419
420 static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq)
421 {
422 struct pxamci_host *host = mmc_priv(mmc);
423 unsigned int cmdat;
424
425 WARN_ON(host->mrq != NULL);
426
427 host->mrq = mrq;
428
429 pxamci_stop_clock(host);
430
431 cmdat = host->cmdat;
432 host->cmdat &= ~CMDAT_INIT;
433
434 if (mrq->data) {
435 pxamci_setup_data(host, mrq->data);
436
437 cmdat &= ~CMDAT_BUSY;
438 cmdat |= CMDAT_DATAEN | CMDAT_DMAEN;
439 if (mrq->data->flags & MMC_DATA_WRITE)
440 cmdat |= CMDAT_WRITE;
441
442 if (mrq->data->flags & MMC_DATA_STREAM)
443 cmdat |= CMDAT_STREAM;
444 }
445
446 pxamci_start_cmd(host, mrq->cmd, cmdat);
447 }
448
449 static int pxamci_get_ro(struct mmc_host *mmc)
450 {
451 struct pxamci_host *host = mmc_priv(mmc);
452
453 if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro)) {
454 if (host->pdata->gpio_card_ro_invert)
455 return !gpio_get_value(host->pdata->gpio_card_ro);
456 else
457 return gpio_get_value(host->pdata->gpio_card_ro);
458 }
459 if (host->pdata && host->pdata->get_ro)
460 return !!host->pdata->get_ro(mmc_dev(mmc));
461 /*
462 * Board doesn't support read only detection; let the mmc core
463 * decide what to do.
464 */
465 return -ENOSYS;
466 }
467
468 static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
469 {
470 struct pxamci_host *host = mmc_priv(mmc);
471
472 if (ios->clock) {
473 unsigned long rate = host->clkrate;
474 unsigned int clk = rate / ios->clock;
475
476 if (host->clkrt == CLKRT_OFF)
477 clk_enable(host->clk);
478
479 if (ios->clock == 26000000) {
480 /* to support 26MHz */
481 host->clkrt = 7;
482 } else {
483 /* to handle (19.5MHz, 26MHz) */
484 if (!clk)
485 clk = 1;
486
487 /*
488 * clk might result in a lower divisor than we
489 * desire. check for that condition and adjust
490 * as appropriate.
491 */
492 if (rate / clk > ios->clock)
493 clk <<= 1;
494 host->clkrt = fls(clk) - 1;
495 }
496
497 /*
498 * we write clkrt on the next command
499 */
500 } else {
501 pxamci_stop_clock(host);
502 if (host->clkrt != CLKRT_OFF) {
503 host->clkrt = CLKRT_OFF;
504 clk_disable(host->clk);
505 }
506 }
507
508 if (host->power_mode != ios->power_mode) {
509 int ret;
510
511 host->power_mode = ios->power_mode;
512
513 ret = pxamci_set_power(host, ios->power_mode, ios->vdd);
514 if (ret) {
515 dev_err(mmc_dev(mmc), "unable to set power\n");
516 /*
517 * The .set_ios() function in the mmc_host_ops
518 * struct return void, and failing to set the
519 * power should be rare so we print an error and
520 * return here.
521 */
522 return;
523 }
524
525 if (ios->power_mode == MMC_POWER_ON)
526 host->cmdat |= CMDAT_INIT;
527 }
528
529 if (ios->bus_width == MMC_BUS_WIDTH_4)
530 host->cmdat |= CMDAT_SD_4DAT;
531 else
532 host->cmdat &= ~CMDAT_SD_4DAT;
533
534 dev_dbg(mmc_dev(mmc), "PXAMCI: clkrt = %x cmdat = %x\n",
535 host->clkrt, host->cmdat);
536 }
537
538 static void pxamci_enable_sdio_irq(struct mmc_host *host, int enable)
539 {
540 struct pxamci_host *pxa_host = mmc_priv(host);
541
542 if (enable)
543 pxamci_enable_irq(pxa_host, SDIO_INT);
544 else
545 pxamci_disable_irq(pxa_host, SDIO_INT);
546 }
547
548 static const struct mmc_host_ops pxamci_ops = {
549 .request = pxamci_request,
550 .get_ro = pxamci_get_ro,
551 .set_ios = pxamci_set_ios,
552 .enable_sdio_irq = pxamci_enable_sdio_irq,
553 };
554
555 static void pxamci_dma_irq(int dma, void *devid)
556 {
557 struct pxamci_host *host = devid;
558 int dcsr = DCSR(dma);
559 DCSR(dma) = dcsr & ~DCSR_STOPIRQEN;
560
561 if (dcsr & DCSR_ENDINTR) {
562 writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
563 } else {
564 pr_err("%s: DMA error on channel %d (DCSR=%#x)\n",
565 mmc_hostname(host->mmc), dma, dcsr);
566 host->data->error = -EIO;
567 pxamci_data_done(host, 0);
568 }
569 }
570
571 static irqreturn_t pxamci_detect_irq(int irq, void *devid)
572 {
573 struct pxamci_host *host = mmc_priv(devid);
574
575 mmc_detect_change(devid, msecs_to_jiffies(host->pdata->detect_delay_ms));
576 return IRQ_HANDLED;
577 }
578
579 #ifdef CONFIG_OF
580 static const struct of_device_id pxa_mmc_dt_ids[] = {
581 { .compatible = "marvell,pxa-mmc" },
582 { }
583 };
584
585 MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids);
586
587 static int pxamci_of_init(struct platform_device *pdev)
588 {
589 struct device_node *np = pdev->dev.of_node;
590 struct pxamci_platform_data *pdata;
591 u32 tmp;
592
593 if (!np)
594 return 0;
595
596 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
597 if (!pdata)
598 return -ENOMEM;
599
600 pdata->gpio_card_detect =
601 of_get_named_gpio(np, "cd-gpios", 0);
602 pdata->gpio_card_ro =
603 of_get_named_gpio(np, "wp-gpios", 0);
604
605 /* pxa-mmc specific */
606 pdata->gpio_power =
607 of_get_named_gpio(np, "pxa-mmc,gpio-power", 0);
608
609 if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0)
610 pdata->detect_delay_ms = tmp;
611
612 pdev->dev.platform_data = pdata;
613
614 return 0;
615 }
616 #else
617 static int pxamci_of_init(struct platform_device *pdev)
618 {
619 return 0;
620 }
621 #endif
622
623 static int pxamci_probe(struct platform_device *pdev)
624 {
625 struct mmc_host *mmc;
626 struct pxamci_host *host = NULL;
627 struct resource *r, *dmarx, *dmatx;
628 int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
629
630 ret = pxamci_of_init(pdev);
631 if (ret)
632 return ret;
633
634 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
635 irq = platform_get_irq(pdev, 0);
636 if (!r || irq < 0)
637 return -ENXIO;
638
639 r = request_mem_region(r->start, SZ_4K, DRIVER_NAME);
640 if (!r)
641 return -EBUSY;
642
643 mmc = mmc_alloc_host(sizeof(struct pxamci_host), &pdev->dev);
644 if (!mmc) {
645 ret = -ENOMEM;
646 goto out;
647 }
648
649 mmc->ops = &pxamci_ops;
650
651 /*
652 * We can do SG-DMA, but we don't because we never know how much
653 * data we successfully wrote to the card.
654 */
655 mmc->max_segs = NR_SG;
656
657 /*
658 * Our hardware DMA can handle a maximum of one page per SG entry.
659 */
660 mmc->max_seg_size = PAGE_SIZE;
661
662 /*
663 * Block length register is only 10 bits before PXA27x.
664 */
665 mmc->max_blk_size = cpu_is_pxa25x() ? 1023 : 2048;
666
667 /*
668 * Block count register is 16 bits.
669 */
670 mmc->max_blk_count = 65535;
671
672 host = mmc_priv(mmc);
673 host->mmc = mmc;
674 host->dma = -1;
675 host->pdata = pdev->dev.platform_data;
676 host->clkrt = CLKRT_OFF;
677
678 host->clk = clk_get(&pdev->dev, NULL);
679 if (IS_ERR(host->clk)) {
680 ret = PTR_ERR(host->clk);
681 host->clk = NULL;
682 goto out;
683 }
684
685 host->clkrate = clk_get_rate(host->clk);
686
687 /*
688 * Calculate minimum clock rate, rounding up.
689 */
690 mmc->f_min = (host->clkrate + 63) / 64;
691 mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate;
692
693 pxamci_init_ocr(host);
694
695 mmc->caps = 0;
696 host->cmdat = 0;
697 if (!cpu_is_pxa25x()) {
698 mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
699 host->cmdat |= CMDAT_SDIO_INT_EN;
700 if (mmc_has_26MHz())
701 mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
702 MMC_CAP_SD_HIGHSPEED;
703 }
704
705 host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
706 if (!host->sg_cpu) {
707 ret = -ENOMEM;
708 goto out;
709 }
710
711 spin_lock_init(&host->lock);
712 host->res = r;
713 host->irq = irq;
714 host->imask = MMC_I_MASK_ALL;
715
716 host->base = ioremap(r->start, SZ_4K);
717 if (!host->base) {
718 ret = -ENOMEM;
719 goto out;
720 }
721
722 /*
723 * Ensure that the host controller is shut down, and setup
724 * with our defaults.
725 */
726 pxamci_stop_clock(host);
727 writel(0, host->base + MMC_SPI);
728 writel(64, host->base + MMC_RESTO);
729 writel(host->imask, host->base + MMC_I_MASK);
730
731 host->dma = pxa_request_dma(DRIVER_NAME, DMA_PRIO_LOW,
732 pxamci_dma_irq, host);
733 if (host->dma < 0) {
734 ret = -EBUSY;
735 goto out;
736 }
737
738 ret = request_irq(host->irq, pxamci_irq, 0, DRIVER_NAME, host);
739 if (ret)
740 goto out;
741
742 platform_set_drvdata(pdev, mmc);
743
744 dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
745 if (!dmarx) {
746 ret = -ENXIO;
747 goto out;
748 }
749 host->dma_drcmrrx = dmarx->start;
750
751 dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
752 if (!dmatx) {
753 ret = -ENXIO;
754 goto out;
755 }
756 host->dma_drcmrtx = dmatx->start;
757
758 if (host->pdata) {
759 gpio_cd = host->pdata->gpio_card_detect;
760 gpio_ro = host->pdata->gpio_card_ro;
761 gpio_power = host->pdata->gpio_power;
762 }
763 if (gpio_is_valid(gpio_power)) {
764 ret = gpio_request(gpio_power, "mmc card power");
765 if (ret) {
766 dev_err(&pdev->dev, "Failed requesting gpio_power %d\n", gpio_power);
767 goto out;
768 }
769 gpio_direction_output(gpio_power,
770 host->pdata->gpio_power_invert);
771 }
772 if (gpio_is_valid(gpio_ro)) {
773 ret = gpio_request(gpio_ro, "mmc card read only");
774 if (ret) {
775 dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
776 goto err_gpio_ro;
777 }
778 gpio_direction_input(gpio_ro);
779 }
780 if (gpio_is_valid(gpio_cd)) {
781 ret = gpio_request(gpio_cd, "mmc card detect");
782 if (ret) {
783 dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd);
784 goto err_gpio_cd;
785 }
786 gpio_direction_input(gpio_cd);
787
788 ret = request_irq(gpio_to_irq(gpio_cd), pxamci_detect_irq,
789 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
790 "mmc card detect", mmc);
791 if (ret) {
792 dev_err(&pdev->dev, "failed to request card detect IRQ\n");
793 goto err_request_irq;
794 }
795 }
796
797 if (host->pdata && host->pdata->init)
798 host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
799
800 if (gpio_is_valid(gpio_power) && host->pdata->setpower)
801 dev_warn(&pdev->dev, "gpio_power and setpower() both defined\n");
802 if (gpio_is_valid(gpio_ro) && host->pdata->get_ro)
803 dev_warn(&pdev->dev, "gpio_ro and get_ro() both defined\n");
804
805 mmc_add_host(mmc);
806
807 return 0;
808
809 err_request_irq:
810 gpio_free(gpio_cd);
811 err_gpio_cd:
812 gpio_free(gpio_ro);
813 err_gpio_ro:
814 gpio_free(gpio_power);
815 out:
816 if (host) {
817 if (host->dma >= 0)
818 pxa_free_dma(host->dma);
819 if (host->base)
820 iounmap(host->base);
821 if (host->sg_cpu)
822 dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
823 if (host->clk)
824 clk_put(host->clk);
825 }
826 if (mmc)
827 mmc_free_host(mmc);
828 release_resource(r);
829 return ret;
830 }
831
832 static int pxamci_remove(struct platform_device *pdev)
833 {
834 struct mmc_host *mmc = platform_get_drvdata(pdev);
835 int gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
836
837 if (mmc) {
838 struct pxamci_host *host = mmc_priv(mmc);
839
840 mmc_remove_host(mmc);
841
842 if (host->pdata) {
843 gpio_cd = host->pdata->gpio_card_detect;
844 gpio_ro = host->pdata->gpio_card_ro;
845 gpio_power = host->pdata->gpio_power;
846 }
847 if (gpio_is_valid(gpio_cd)) {
848 free_irq(gpio_to_irq(gpio_cd), mmc);
849 gpio_free(gpio_cd);
850 }
851 if (gpio_is_valid(gpio_ro))
852 gpio_free(gpio_ro);
853 if (gpio_is_valid(gpio_power))
854 gpio_free(gpio_power);
855 if (host->vcc)
856 regulator_put(host->vcc);
857
858 if (host->pdata && host->pdata->exit)
859 host->pdata->exit(&pdev->dev, mmc);
860
861 pxamci_stop_clock(host);
862 writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
863 END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
864 host->base + MMC_I_MASK);
865
866 DRCMR(host->dma_drcmrrx) = 0;
867 DRCMR(host->dma_drcmrtx) = 0;
868
869 free_irq(host->irq, host);
870 pxa_free_dma(host->dma);
871 iounmap(host->base);
872 dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
873
874 clk_put(host->clk);
875
876 release_resource(host->res);
877
878 mmc_free_host(mmc);
879 }
880 return 0;
881 }
882
883 static struct platform_driver pxamci_driver = {
884 .probe = pxamci_probe,
885 .remove = pxamci_remove,
886 .driver = {
887 .name = DRIVER_NAME,
888 .owner = THIS_MODULE,
889 .of_match_table = of_match_ptr(pxa_mmc_dt_ids),
890 },
891 };
892
893 module_platform_driver(pxamci_driver);
894
895 MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver");
896 MODULE_LICENSE("GPL");
897 MODULE_ALIAS("platform:pxa2xx-mci");
Linux with added FPC-III support