?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / mmc / host / sdhci.c
blob9ddef47635418d4d18019a8a1433e67ca536628c
1 /*
2 * linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
3 *
4 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
10 *
11 * Thanks to the following companies for their support:
12 *
13 * - JMicron (hardware and technical support)
14 */
15
16 #include <linux/delay.h>
17 #include <linux/highmem.h>
18 #include <linux/io.h>
19 #include <linux/module.h>
20 #include <linux/dma-mapping.h>
21 #include <linux/slab.h>
22 #include <linux/scatterlist.h>
23 #include <linux/regulator/consumer.h>
24 #include <linux/pm_runtime.h>
25
26 #include <linux/leds.h>
27
28 #include <linux/mmc/mmc.h>
29 #include <linux/mmc/host.h>
30 #include <linux/mmc/card.h>
31 #include <linux/mmc/slot-gpio.h>
32
33 #include "sdhci.h"
34
35 #define DRIVER_NAME "sdhci"
36
37 #define DBG(f, x...) \
38 pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
39
40 #if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
41 defined(CONFIG_MMC_SDHCI_MODULE))
42 #define SDHCI_USE_LEDS_CLASS
43 #endif
44
45 #define MAX_TUNING_LOOP 40
46
47 static unsigned int debug_quirks = 0;
48 static unsigned int debug_quirks2;
49
50 static void sdhci_finish_data(struct sdhci_host *);
51
52 static void sdhci_finish_command(struct sdhci_host *);
53 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
54 static void sdhci_tuning_timer(unsigned long data);
55 static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
56
57 #ifdef CONFIG_PM_RUNTIME
58 static int sdhci_runtime_pm_get(struct sdhci_host *host);
59 static int sdhci_runtime_pm_put(struct sdhci_host *host);
60 static void sdhci_runtime_pm_bus_on(struct sdhci_host *host);
61 static void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
62 #else
63 static inline int sdhci_runtime_pm_get(struct sdhci_host *host)
64 {
65 return 0;
66 }
67 static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
68 {
69 return 0;
70 }
71 static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
72 {
73 }
74 static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
75 {
76 }
77 #endif
78
79 static void sdhci_dumpregs(struct sdhci_host *host)
80 {
81 pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
82 mmc_hostname(host->mmc));
83
84 pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
85 sdhci_readl(host, SDHCI_DMA_ADDRESS),
86 sdhci_readw(host, SDHCI_HOST_VERSION));
87 pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
88 sdhci_readw(host, SDHCI_BLOCK_SIZE),
89 sdhci_readw(host, SDHCI_BLOCK_COUNT));
90 pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
91 sdhci_readl(host, SDHCI_ARGUMENT),
92 sdhci_readw(host, SDHCI_TRANSFER_MODE));
93 pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
94 sdhci_readl(host, SDHCI_PRESENT_STATE),
95 sdhci_readb(host, SDHCI_HOST_CONTROL));
96 pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
97 sdhci_readb(host, SDHCI_POWER_CONTROL),
98 sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
99 pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
100 sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
101 sdhci_readw(host, SDHCI_CLOCK_CONTROL));
102 pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
103 sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
104 sdhci_readl(host, SDHCI_INT_STATUS));
105 pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
106 sdhci_readl(host, SDHCI_INT_ENABLE),
107 sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
108 pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
109 sdhci_readw(host, SDHCI_ACMD12_ERR),
110 sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
111 pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
112 sdhci_readl(host, SDHCI_CAPABILITIES),
113 sdhci_readl(host, SDHCI_CAPABILITIES_1));
114 pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
115 sdhci_readw(host, SDHCI_COMMAND),
116 sdhci_readl(host, SDHCI_MAX_CURRENT));
117 pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
118 sdhci_readw(host, SDHCI_HOST_CONTROL2));
119
120 if (host->flags & SDHCI_USE_ADMA)
121 pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
122 readl(host->ioaddr + SDHCI_ADMA_ERROR),
123 readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
124
125 pr_debug(DRIVER_NAME ": ===========================================\n");
126 }
127
128 /*****************************************************************************\
129 * *
130 * Low level functions *
131 * *
132 \*****************************************************************************/
133
134 static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
135 {
136 u32 ier;
137
138 ier = sdhci_readl(host, SDHCI_INT_ENABLE);
139 ier &= ~clear;
140 ier |= set;
141 sdhci_writel(host, ier, SDHCI_INT_ENABLE);
142 sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
143 }
144
145 static void sdhci_unmask_irqs(struct sdhci_host *host, u32 irqs)
146 {
147 sdhci_clear_set_irqs(host, 0, irqs);
148 }
149
150 static void sdhci_mask_irqs(struct sdhci_host *host, u32 irqs)
151 {
152 sdhci_clear_set_irqs(host, irqs, 0);
153 }
154
155 static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
156 {
157 u32 present, irqs;
158
159 if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
160 (host->mmc->caps & MMC_CAP_NONREMOVABLE))
161 return;
162
163 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
164 SDHCI_CARD_PRESENT;
165 irqs = present ? SDHCI_INT_CARD_REMOVE : SDHCI_INT_CARD_INSERT;
166
167 if (enable)
168 sdhci_unmask_irqs(host, irqs);
169 else
170 sdhci_mask_irqs(host, irqs);
171 }
172
173 static void sdhci_enable_card_detection(struct sdhci_host *host)
174 {
175 sdhci_set_card_detection(host, true);
176 }
177
178 static void sdhci_disable_card_detection(struct sdhci_host *host)
179 {
180 sdhci_set_card_detection(host, false);
181 }
182
183 static void sdhci_reset(struct sdhci_host *host, u8 mask)
184 {
185 unsigned long timeout;
186 u32 uninitialized_var(ier);
187
188 if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
189 if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
190 SDHCI_CARD_PRESENT))
191 return;
192 }
193
194 if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
195 ier = sdhci_readl(host, SDHCI_INT_ENABLE);
196
197 if (host->ops->platform_reset_enter)
198 host->ops->platform_reset_enter(host, mask);
199
200 sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
201
202 if (mask & SDHCI_RESET_ALL) {
203 host->clock = 0;
204 /* Reset-all turns off SD Bus Power */
205 if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
206 sdhci_runtime_pm_bus_off(host);
207 }
208
209 /* Wait max 100 ms */
210 timeout = 100;
211
212 /* hw clears the bit when it's done */
213 while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
214 if (timeout == 0) {
215 pr_err("%s: Reset 0x%x never completed.\n",
216 mmc_hostname(host->mmc), (int)mask);
217 sdhci_dumpregs(host);
218 return;
219 }
220 timeout--;
221 mdelay(1);
222 }
223
224 if (host->ops->platform_reset_exit)
225 host->ops->platform_reset_exit(host, mask);
226
227 if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
228 sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier);
229
230 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
231 if ((host->ops->enable_dma) && (mask & SDHCI_RESET_ALL))
232 host->ops->enable_dma(host);
233 }
234 }
235
236 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
237
238 static void sdhci_init(struct sdhci_host *host, int soft)
239 {
240 if (soft)
241 sdhci_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
242 else
243 sdhci_reset(host, SDHCI_RESET_ALL);
244
245 sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK,
246 SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
247 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
248 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
249 SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE);
250
251 if (soft) {
252 /* force clock reconfiguration */
253 host->clock = 0;
254 sdhci_set_ios(host->mmc, &host->mmc->ios);
255 }
256 }
257
258 static void sdhci_reinit(struct sdhci_host *host)
259 {
260 sdhci_init(host, 0);
261 /*
262 * Retuning stuffs are affected by different cards inserted and only
263 * applicable to UHS-I cards. So reset these fields to their initial
264 * value when card is removed.
265 */
266 if (host->flags & SDHCI_USING_RETUNING_TIMER) {
267 host->flags &= ~SDHCI_USING_RETUNING_TIMER;
268
269 del_timer_sync(&host->tuning_timer);
270 host->flags &= ~SDHCI_NEEDS_RETUNING;
271 host->mmc->max_blk_count =
272 (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
273 }
274 sdhci_enable_card_detection(host);
275 }
276
277 static void sdhci_activate_led(struct sdhci_host *host)
278 {
279 u8 ctrl;
280
281 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
282 ctrl |= SDHCI_CTRL_LED;
283 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
284 }
285
286 static void sdhci_deactivate_led(struct sdhci_host *host)
287 {
288 u8 ctrl;
289
290 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
291 ctrl &= ~SDHCI_CTRL_LED;
292 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
293 }
294
295 #ifdef SDHCI_USE_LEDS_CLASS
296 static void sdhci_led_control(struct led_classdev *led,
297 enum led_brightness brightness)
298 {
299 struct sdhci_host *host = container_of(led, struct sdhci_host, led);
300 unsigned long flags;
301
302 spin_lock_irqsave(&host->lock, flags);
303
304 if (host->runtime_suspended)
305 goto out;
306
307 if (brightness == LED_OFF)
308 sdhci_deactivate_led(host);
309 else
310 sdhci_activate_led(host);
311 out:
312 spin_unlock_irqrestore(&host->lock, flags);
313 }
314 #endif
315
316 /*****************************************************************************\
317 * *
318 * Core functions *
319 * *
320 \*****************************************************************************/
321
322 static void sdhci_read_block_pio(struct sdhci_host *host)
323 {
324 unsigned long flags;
325 size_t blksize, len, chunk;
326 u32 uninitialized_var(scratch);
327 u8 *buf;
328
329 DBG("PIO reading\n");
330
331 blksize = host->data->blksz;
332 chunk = 0;
333
334 local_irq_save(flags);
335
336 while (blksize) {
337 if (!sg_miter_next(&host->sg_miter))
338 BUG();
339
340 len = min(host->sg_miter.length, blksize);
341
342 blksize -= len;
343 host->sg_miter.consumed = len;
344
345 buf = host->sg_miter.addr;
346
347 while (len) {
348 if (chunk == 0) {
349 scratch = sdhci_readl(host, SDHCI_BUFFER);
350 chunk = 4;
351 }
352
353 *buf = scratch & 0xFF;
354
355 buf++;
356 scratch >>= 8;
357 chunk--;
358 len--;
359 }
360 }
361
362 sg_miter_stop(&host->sg_miter);
363
364 local_irq_restore(flags);
365 }
366
367 static void sdhci_write_block_pio(struct sdhci_host *host)
368 {
369 unsigned long flags;
370 size_t blksize, len, chunk;
371 u32 scratch;
372 u8 *buf;
373
374 DBG("PIO writing\n");
375
376 blksize = host->data->blksz;
377 chunk = 0;
378 scratch = 0;
379
380 local_irq_save(flags);
381
382 while (blksize) {
383 if (!sg_miter_next(&host->sg_miter))
384 BUG();
385
386 len = min(host->sg_miter.length, blksize);
387
388 blksize -= len;
389 host->sg_miter.consumed = len;
390
391 buf = host->sg_miter.addr;
392
393 while (len) {
394 scratch |= (u32)*buf << (chunk * 8);
395
396 buf++;
397 chunk++;
398 len--;
399
400 if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
401 sdhci_writel(host, scratch, SDHCI_BUFFER);
402 chunk = 0;
403 scratch = 0;
404 }
405 }
406 }
407
408 sg_miter_stop(&host->sg_miter);
409
410 local_irq_restore(flags);
411 }
412
413 static void sdhci_transfer_pio(struct sdhci_host *host)
414 {
415 u32 mask;
416
417 BUG_ON(!host->data);
418
419 if (host->blocks == 0)
420 return;
421
422 if (host->data->flags & MMC_DATA_READ)
423 mask = SDHCI_DATA_AVAILABLE;
424 else
425 mask = SDHCI_SPACE_AVAILABLE;
426
427 /*
428 * Some controllers (JMicron JMB38x) mess up the buffer bits
429 * for transfers < 4 bytes. As long as it is just one block,
430 * we can ignore the bits.
431 */
432 if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
433 (host->data->blocks == 1))
434 mask = ~0;
435
436 while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
437 if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
438 udelay(100);
439
440 if (host->data->flags & MMC_DATA_READ)
441 sdhci_read_block_pio(host);
442 else
443 sdhci_write_block_pio(host);
444
445 host->blocks--;
446 if (host->blocks == 0)
447 break;
448 }
449
450 DBG("PIO transfer complete.\n");
451 }
452
453 static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
454 {
455 local_irq_save(*flags);
456 return kmap_atomic(sg_page(sg)) + sg->offset;
457 }
458
459 static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
460 {
461 kunmap_atomic(buffer);
462 local_irq_restore(*flags);
463 }
464
465 static void sdhci_set_adma_desc(u8 *desc, u32 addr, int len, unsigned cmd)
466 {
467 __le32 *dataddr = (__le32 __force *)(desc + 4);
468 __le16 *cmdlen = (__le16 __force *)desc;
469
470 /* SDHCI specification says ADMA descriptors should be 4 byte
471 * aligned, so using 16 or 32bit operations should be safe. */
472
473 cmdlen[0] = cpu_to_le16(cmd);
474 cmdlen[1] = cpu_to_le16(len);
475
476 dataddr[0] = cpu_to_le32(addr);
477 }
478
479 static int sdhci_adma_table_pre(struct sdhci_host *host,
480 struct mmc_data *data)
481 {
482 int direction;
483
484 u8 *desc;
485 u8 *align;
486 dma_addr_t addr;
487 dma_addr_t align_addr;
488 int len, offset;
489
490 struct scatterlist *sg;
491 int i;
492 char *buffer;
493 unsigned long flags;
494
495 /*
496 * The spec does not specify endianness of descriptor table.
497 * We currently guess that it is LE.
498 */
499
500 if (data->flags & MMC_DATA_READ)
501 direction = DMA_FROM_DEVICE;
502 else
503 direction = DMA_TO_DEVICE;
504
505 /*
506 * The ADMA descriptor table is mapped further down as we
507 * need to fill it with data first.
508 */
509
510 host->align_addr = dma_map_single(mmc_dev(host->mmc),
511 host->align_buffer, 128 * 4, direction);
512 if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
513 goto fail;
514 BUG_ON(host->align_addr & 0x3);
515
516 host->sg_count = dma_map_sg(mmc_dev(host->mmc),
517 data->sg, data->sg_len, direction);
518 if (host->sg_count == 0)
519 goto unmap_align;
520
521 desc = host->adma_desc;
522 align = host->align_buffer;
523
524 align_addr = host->align_addr;
525
526 for_each_sg(data->sg, sg, host->sg_count, i) {
527 addr = sg_dma_address(sg);
528 len = sg_dma_len(sg);
529
530 /*
531 * The SDHCI specification states that ADMA
532 * addresses must be 32-bit aligned. If they
533 * aren't, then we use a bounce buffer for
534 * the (up to three) bytes that screw up the
535 * alignment.
536 */
537 offset = (4 - (addr & 0x3)) & 0x3;
538 if (offset) {
539 if (data->flags & MMC_DATA_WRITE) {
540 buffer = sdhci_kmap_atomic(sg, &flags);
541 WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
542 memcpy(align, buffer, offset);
543 sdhci_kunmap_atomic(buffer, &flags);
544 }
545
546 /* tran, valid */
547 sdhci_set_adma_desc(desc, align_addr, offset, 0x21);
548
549 BUG_ON(offset > 65536);
550
551 align += 4;
552 align_addr += 4;
553
554 desc += 8;
555
556 addr += offset;
557 len -= offset;
558 }
559
560 BUG_ON(len > 65536);
561
562 /* tran, valid */
563 sdhci_set_adma_desc(desc, addr, len, 0x21);
564 desc += 8;
565
566 /*
567 * If this triggers then we have a calculation bug
568 * somewhere. :/
569 */
570 WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
571 }
572
573 if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
574 /*
575 * Mark the last descriptor as the terminating descriptor
576 */
577 if (desc != host->adma_desc) {
578 desc -= 8;
579 desc[0] |= 0x2; /* end */
580 }
581 } else {
582 /*
583 * Add a terminating entry.
584 */
585
586 /* nop, end, valid */
587 sdhci_set_adma_desc(desc, 0, 0, 0x3);
588 }
589
590 /*
591 * Resync align buffer as we might have changed it.
592 */
593 if (data->flags & MMC_DATA_WRITE) {
594 dma_sync_single_for_device(mmc_dev(host->mmc),
595 host->align_addr, 128 * 4, direction);
596 }
597
598 host->adma_addr = dma_map_single(mmc_dev(host->mmc),
599 host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
600 if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr))
601 goto unmap_entries;
602 BUG_ON(host->adma_addr & 0x3);
603
604 return 0;
605
606 unmap_entries:
607 dma_unmap_sg(mmc_dev(host->mmc), data->sg,
608 data->sg_len, direction);
609 unmap_align:
610 dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
611 128 * 4, direction);
612 fail:
613 return -EINVAL;
614 }
615
616 static void sdhci_adma_table_post(struct sdhci_host *host,
617 struct mmc_data *data)
618 {
619 int direction;
620
621 struct scatterlist *sg;
622 int i, size;
623 u8 *align;
624 char *buffer;
625 unsigned long flags;
626
627 if (data->flags & MMC_DATA_READ)
628 direction = DMA_FROM_DEVICE;
629 else
630 direction = DMA_TO_DEVICE;
631
632 dma_unmap_single(mmc_dev(host->mmc), host->adma_addr,
633 (128 * 2 + 1) * 4, DMA_TO_DEVICE);
634
635 dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
636 128 * 4, direction);
637
638 if (data->flags & MMC_DATA_READ) {
639 dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
640 data->sg_len, direction);
641
642 align = host->align_buffer;
643
644 for_each_sg(data->sg, sg, host->sg_count, i) {
645 if (sg_dma_address(sg) & 0x3) {
646 size = 4 - (sg_dma_address(sg) & 0x3);
647
648 buffer = sdhci_kmap_atomic(sg, &flags);
649 WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
650 memcpy(buffer, align, size);
651 sdhci_kunmap_atomic(buffer, &flags);
652
653 align += 4;
654 }
655 }
656 }
657
658 dma_unmap_sg(mmc_dev(host->mmc), data->sg,
659 data->sg_len, direction);
660 }
661
662 static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
663 {
664 u8 count;
665 struct mmc_data *data = cmd->data;
666 unsigned target_timeout, current_timeout;
667
668 /*
669 * If the host controller provides us with an incorrect timeout
670 * value, just skip the check and use 0xE. The hardware may take
671 * longer to time out, but that's much better than having a too-short
672 * timeout value.
673 */
674 if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
675 return 0xE;
676
677 /* Unspecified timeout, assume max */
678 if (!data && !cmd->cmd_timeout_ms)
679 return 0xE;
680
681 /* timeout in us */
682 if (!data)
683 target_timeout = cmd->cmd_timeout_ms * 1000;
684 else {
685 target_timeout = data->timeout_ns / 1000;
686 if (host->clock)
687 target_timeout += data->timeout_clks / host->clock;
688 }
689
690 /*
691 * Figure out needed cycles.
692 * We do this in steps in order to fit inside a 32 bit int.
693 * The first step is the minimum timeout, which will have a
694 * minimum resolution of 6 bits:
695 * (1) 2^13*1000 > 2^22,
696 * (2) host->timeout_clk < 2^16
697 * =>
698 * (1) / (2) > 2^6
699 */
700 count = 0;
701 current_timeout = (1 << 13) * 1000 / host->timeout_clk;
702 while (current_timeout < target_timeout) {
703 count++;
704 current_timeout <<= 1;
705 if (count >= 0xF)
706 break;
707 }
708
709 if (count >= 0xF) {
710 DBG("%s: Too large timeout 0x%x requested for CMD%d!\n",
711 mmc_hostname(host->mmc), count, cmd->opcode);
712 count = 0xE;
713 }
714
715 return count;
716 }
717
718 static void sdhci_set_transfer_irqs(struct sdhci_host *host)
719 {
720 u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
721 u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
722
723 if (host->flags & SDHCI_REQ_USE_DMA)
724 sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
725 else
726 sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
727 }
728
729 static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
730 {
731 u8 count;
732 u8 ctrl;
733 struct mmc_data *data = cmd->data;
734 int ret;
735
736 WARN_ON(host->data);
737
738 if (data || (cmd->flags & MMC_RSP_BUSY)) {
739 count = sdhci_calc_timeout(host, cmd);
740 sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
741 }
742
743 if (!data)
744 return;
745
746 /* Sanity checks */
747 BUG_ON(data->blksz * data->blocks > 524288);
748 BUG_ON(data->blksz > host->mmc->max_blk_size);
749 BUG_ON(data->blocks > 65535);
750
751 host->data = data;
752 host->data_early = 0;
753 host->data->bytes_xfered = 0;
754
755 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
756 host->flags |= SDHCI_REQ_USE_DMA;
757
758 /*
759 * FIXME: This doesn't account for merging when mapping the
760 * scatterlist.
761 */
762 if (host->flags & SDHCI_REQ_USE_DMA) {
763 int broken, i;
764 struct scatterlist *sg;
765
766 broken = 0;
767 if (host->flags & SDHCI_USE_ADMA) {
768 if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
769 broken = 1;
770 } else {
771 if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
772 broken = 1;
773 }
774
775 if (unlikely(broken)) {
776 for_each_sg(data->sg, sg, data->sg_len, i) {
777 if (sg->length & 0x3) {
778 DBG("Reverting to PIO because of "
779 "transfer size (%d)\n",
780 sg->length);
781 host->flags &= ~SDHCI_REQ_USE_DMA;
782 break;
783 }
784 }
785 }
786 }
787
788 /*
789 * The assumption here being that alignment is the same after
790 * translation to device address space.
791 */
792 if (host->flags & SDHCI_REQ_USE_DMA) {
793 int broken, i;
794 struct scatterlist *sg;
795
796 broken = 0;
797 if (host->flags & SDHCI_USE_ADMA) {
798 /*
799 * As we use 3 byte chunks to work around
800 * alignment problems, we need to check this
801 * quirk.
802 */
803 if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
804 broken = 1;
805 } else {
806 if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
807 broken = 1;
808 }
809
810 if (unlikely(broken)) {
811 for_each_sg(data->sg, sg, data->sg_len, i) {
812 if (sg->offset & 0x3) {
813 DBG("Reverting to PIO because of "
814 "bad alignment\n");
815 host->flags &= ~SDHCI_REQ_USE_DMA;
816 break;
817 }
818 }
819 }
820 }
821
822 if (host->flags & SDHCI_REQ_USE_DMA) {
823 if (host->flags & SDHCI_USE_ADMA) {
824 ret = sdhci_adma_table_pre(host, data);
825 if (ret) {
826 /*
827 * This only happens when someone fed
828 * us an invalid request.
829 */
830 WARN_ON(1);
831 host->flags &= ~SDHCI_REQ_USE_DMA;
832 } else {
833 sdhci_writel(host, host->adma_addr,
834 SDHCI_ADMA_ADDRESS);
835 }
836 } else {
837 int sg_cnt;
838
839 sg_cnt = dma_map_sg(mmc_dev(host->mmc),
840 data->sg, data->sg_len,
841 (data->flags & MMC_DATA_READ) ?
842 DMA_FROM_DEVICE :
843 DMA_TO_DEVICE);
844 if (sg_cnt == 0) {
845 /*
846 * This only happens when someone fed
847 * us an invalid request.
848 */
849 WARN_ON(1);
850 host->flags &= ~SDHCI_REQ_USE_DMA;
851 } else {
852 WARN_ON(sg_cnt != 1);
853 sdhci_writel(host, sg_dma_address(data->sg),
854 SDHCI_DMA_ADDRESS);
855 }
856 }
857 }
858
859 /*
860 * Always adjust the DMA selection as some controllers
861 * (e.g. JMicron) can't do PIO properly when the selection
862 * is ADMA.
863 */
864 if (host->version >= SDHCI_SPEC_200) {
865 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
866 ctrl &= ~SDHCI_CTRL_DMA_MASK;
867 if ((host->flags & SDHCI_REQ_USE_DMA) &&
868 (host->flags & SDHCI_USE_ADMA))
869 ctrl |= SDHCI_CTRL_ADMA32;
870 else
871 ctrl |= SDHCI_CTRL_SDMA;
872 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
873 }
874
875 if (!(host->flags & SDHCI_REQ_USE_DMA)) {
876 int flags;
877
878 flags = SG_MITER_ATOMIC;
879 if (host->data->flags & MMC_DATA_READ)
880 flags |= SG_MITER_TO_SG;
881 else
882 flags |= SG_MITER_FROM_SG;
883 sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
884 host->blocks = data->blocks;
885 }
886
887 sdhci_set_transfer_irqs(host);
888
889 /* Set the DMA boundary value and block size */
890 sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
891 data->blksz), SDHCI_BLOCK_SIZE);
892 sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
893 }
894
895 static void sdhci_set_transfer_mode(struct sdhci_host *host,
896 struct mmc_command *cmd)
897 {
898 u16 mode;
899 struct mmc_data *data = cmd->data;
900
901 if (data == NULL) {
902 /* clear Auto CMD settings for no data CMDs */
903 mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
904 sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
905 SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
906 return;
907 }
908
909 WARN_ON(!host->data);
910
911 mode = SDHCI_TRNS_BLK_CNT_EN;
912 if (mmc_op_multi(cmd->opcode) || data->blocks > 1) {
913 mode |= SDHCI_TRNS_MULTI;
914 /*
915 * If we are sending CMD23, CMD12 never gets sent
916 * on successful completion (so no Auto-CMD12).
917 */
918 if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12))
919 mode |= SDHCI_TRNS_AUTO_CMD12;
920 else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
921 mode |= SDHCI_TRNS_AUTO_CMD23;
922 sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2);
923 }
924 }
925
926 if (data->flags & MMC_DATA_READ)
927 mode |= SDHCI_TRNS_READ;
928 if (host->flags & SDHCI_REQ_USE_DMA)
929 mode |= SDHCI_TRNS_DMA;
930
931 sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
932 }
933
934 static void sdhci_finish_data(struct sdhci_host *host)
935 {
936 struct mmc_data *data;
937
938 BUG_ON(!host->data);
939
940 data = host->data;
941 host->data = NULL;
942
943 if (host->flags & SDHCI_REQ_USE_DMA) {
944 if (host->flags & SDHCI_USE_ADMA)
945 sdhci_adma_table_post(host, data);
946 else {
947 dma_unmap_sg(mmc_dev(host->mmc), data->sg,
948 data->sg_len, (data->flags & MMC_DATA_READ) ?
949 DMA_FROM_DEVICE : DMA_TO_DEVICE);
950 }
951 }
952
953 /*
954 * The specification states that the block count register must
955 * be updated, but it does not specify at what point in the
956 * data flow. That makes the register entirely useless to read
957 * back so we have to assume that nothing made it to the card
958 * in the event of an error.
959 */
960 if (data->error)
961 data->bytes_xfered = 0;
962 else
963 data->bytes_xfered = data->blksz * data->blocks;
964
965 /*
966 * Need to send CMD12 if -
967 * a) open-ended multiblock transfer (no CMD23)
968 * b) error in multiblock transfer
969 */
970 if (data->stop &&
971 (data->error ||
972 !host->mrq->sbc)) {
973
974 /*
975 * The controller needs a reset of internal state machines
976 * upon error conditions.
977 */
978 if (data->error) {
979 sdhci_reset(host, SDHCI_RESET_CMD);
980 sdhci_reset(host, SDHCI_RESET_DATA);
981 }
982
983 sdhci_send_command(host, data->stop);
984 } else
985 tasklet_schedule(&host->finish_tasklet);
986 }
987
988 void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
989 {
990 int flags;
991 u32 mask;
992 unsigned long timeout;
993
994 WARN_ON(host->cmd);
995
996 /* Wait max 10 ms */
997 timeout = 10;
998
999 mask = SDHCI_CMD_INHIBIT;
1000 if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
1001 mask |= SDHCI_DATA_INHIBIT;
1002
1003 /* We shouldn't wait for data inihibit for stop commands, even
1004 though they might use busy signaling */
1005 if (host->mrq->data && (cmd == host->mrq->data->stop))
1006 mask &= ~SDHCI_DATA_INHIBIT;
1007
1008 while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
1009 if (timeout == 0) {
1010 pr_err("%s: Controller never released "
1011 "inhibit bit(s).\n", mmc_hostname(host->mmc));
1012 sdhci_dumpregs(host);
1013 cmd->error = -EIO;
1014 tasklet_schedule(&host->finish_tasklet);
1015 return;
1016 }
1017 timeout--;
1018 mdelay(1);
1019 }
1020
1021 timeout = jiffies;
1022 if (!cmd->data && cmd->cmd_timeout_ms > 9000)
1023 timeout += DIV_ROUND_UP(cmd->cmd_timeout_ms, 1000) * HZ + HZ;
1024 else
1025 timeout += 10 * HZ;
1026 mod_timer(&host->timer, timeout);
1027
1028 host->cmd = cmd;
1029
1030 sdhci_prepare_data(host, cmd);
1031
1032 sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
1033
1034 sdhci_set_transfer_mode(host, cmd);
1035
1036 if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
1037 pr_err("%s: Unsupported response type!\n",
1038 mmc_hostname(host->mmc));
1039 cmd->error = -EINVAL;
1040 tasklet_schedule(&host->finish_tasklet);
1041 return;
1042 }
1043
1044 if (!(cmd->flags & MMC_RSP_PRESENT))
1045 flags = SDHCI_CMD_RESP_NONE;
1046 else if (cmd->flags & MMC_RSP_136)
1047 flags = SDHCI_CMD_RESP_LONG;
1048 else if (cmd->flags & MMC_RSP_BUSY)
1049 flags = SDHCI_CMD_RESP_SHORT_BUSY;
1050 else
1051 flags = SDHCI_CMD_RESP_SHORT;
1052
1053 if (cmd->flags & MMC_RSP_CRC)
1054 flags |= SDHCI_CMD_CRC;
1055 if (cmd->flags & MMC_RSP_OPCODE)
1056 flags |= SDHCI_CMD_INDEX;
1057
1058 /* CMD19 is special in that the Data Present Select should be set */
1059 if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK ||
1060 cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
1061 flags |= SDHCI_CMD_DATA;
1062
1063 sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
1064 }
1065 EXPORT_SYMBOL_GPL(sdhci_send_command);
1066
1067 static void sdhci_finish_command(struct sdhci_host *host)
1068 {
1069 int i;
1070
1071 BUG_ON(host->cmd == NULL);
1072
1073 if (host->cmd->flags & MMC_RSP_PRESENT) {
1074 if (host->cmd->flags & MMC_RSP_136) {
1075 /* CRC is stripped so we need to do some shifting. */
1076 for (i = 0;i < 4;i++) {
1077 host->cmd->resp[i] = sdhci_readl(host,
1078 SDHCI_RESPONSE + (3-i)*4) << 8;
1079 if (i != 3)
1080 host->cmd->resp[i] |=
1081 sdhci_readb(host,
1082 SDHCI_RESPONSE + (3-i)*4-1);
1083 }
1084 } else {
1085 host->cmd->resp[0] = sdhci_readl(host, SDHCI_RESPONSE);
1086 }
1087 }
1088
1089 host->cmd->error = 0;
1090
1091 /* Finished CMD23, now send actual command. */
1092 if (host->cmd == host->mrq->sbc) {
1093 host->cmd = NULL;
1094 sdhci_send_command(host, host->mrq->cmd);
1095 } else {
1096
1097 /* Processed actual command. */
1098 if (host->data && host->data_early)
1099 sdhci_finish_data(host);
1100
1101 if (!host->cmd->data)
1102 tasklet_schedule(&host->finish_tasklet);
1103
1104 host->cmd = NULL;
1105 }
1106 }
1107
1108 static u16 sdhci_get_preset_value(struct sdhci_host *host)
1109 {
1110 u16 ctrl, preset = 0;
1111
1112 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1113
1114 switch (ctrl & SDHCI_CTRL_UHS_MASK) {
1115 case SDHCI_CTRL_UHS_SDR12:
1116 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
1117 break;
1118 case SDHCI_CTRL_UHS_SDR25:
1119 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25);
1120 break;
1121 case SDHCI_CTRL_UHS_SDR50:
1122 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50);
1123 break;
1124 case SDHCI_CTRL_UHS_SDR104:
1125 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104);
1126 break;
1127 case SDHCI_CTRL_UHS_DDR50:
1128 preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
1129 break;
1130 default:
1131 pr_warn("%s: Invalid UHS-I mode selected\n",
1132 mmc_hostname(host->mmc));
1133 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
1134 break;
1135 }
1136 return preset;
1137 }
1138
1139 static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
1140 {
1141 int div = 0; /* Initialized for compiler warning */
1142 int real_div = div, clk_mul = 1;
1143 u16 clk = 0;
1144 unsigned long timeout;
1145
1146 if (clock && clock == host->clock)
1147 return;
1148
1149 host->mmc->actual_clock = 0;
1150
1151 if (host->ops->set_clock) {
1152 host->ops->set_clock(host, clock);
1153 if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
1154 return;
1155 }
1156
1157 sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
1158
1159 if (clock == 0)
1160 goto out;
1161
1162 if (host->version >= SDHCI_SPEC_300) {
1163 if (sdhci_readw(host, SDHCI_HOST_CONTROL2) &
1164 SDHCI_CTRL_PRESET_VAL_ENABLE) {
1165 u16 pre_val;
1166
1167 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1168 pre_val = sdhci_get_preset_value(host);
1169 div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK)
1170 >> SDHCI_PRESET_SDCLK_FREQ_SHIFT;
1171 if (host->clk_mul &&
1172 (pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) {
1173 clk = SDHCI_PROG_CLOCK_MODE;
1174 real_div = div + 1;
1175 clk_mul = host->clk_mul;
1176 } else {
1177 real_div = max_t(int, 1, div << 1);
1178 }
1179 goto clock_set;
1180 }
1181
1182 /*
1183 * Check if the Host Controller supports Programmable Clock
1184 * Mode.
1185 */
1186 if (host->clk_mul) {
1187 for (div = 1; div <= 1024; div++) {
1188 if ((host->max_clk * host->clk_mul / div)
1189 <= clock)
1190 break;
1191 }
1192 /*
1193 * Set Programmable Clock Mode in the Clock
1194 * Control register.
1195 */
1196 clk = SDHCI_PROG_CLOCK_MODE;
1197 real_div = div;
1198 clk_mul = host->clk_mul;
1199 div--;
1200 } else {
1201 /* Version 3.00 divisors must be a multiple of 2. */
1202 if (host->max_clk <= clock)
1203 div = 1;
1204 else {
1205 for (div = 2; div < SDHCI_MAX_DIV_SPEC_300;
1206 div += 2) {
1207 if ((host->max_clk / div) <= clock)
1208 break;
1209 }
1210 }
1211 real_div = div;
1212 div >>= 1;
1213 }
1214 } else {
1215 /* Version 2.00 divisors must be a power of 2. */
1216 for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) {
1217 if ((host->max_clk / div) <= clock)
1218 break;
1219 }
1220 real_div = div;
1221 div >>= 1;
1222 }
1223
1224 clock_set:
1225 if (real_div)
1226 host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div;
1227
1228 clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
1229 clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
1230 << SDHCI_DIVIDER_HI_SHIFT;
1231 clk |= SDHCI_CLOCK_INT_EN;
1232 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1233
1234 /* Wait max 20 ms */
1235 timeout = 20;
1236 while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
1237 & SDHCI_CLOCK_INT_STABLE)) {
1238 if (timeout == 0) {
1239 pr_err("%s: Internal clock never "
1240 "stabilised.\n", mmc_hostname(host->mmc));
1241 sdhci_dumpregs(host);
1242 return;
1243 }
1244 timeout--;
1245 mdelay(1);
1246 }
1247
1248 clk |= SDHCI_CLOCK_CARD_EN;
1249 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1250
1251 out:
1252 host->clock = clock;
1253 }
1254
1255 static inline void sdhci_update_clock(struct sdhci_host *host)
1256 {
1257 unsigned int clock;
1258
1259 clock = host->clock;
1260 host->clock = 0;
1261 sdhci_set_clock(host, clock);
1262 }
1263
1264 static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
1265 {
1266 u8 pwr = 0;
1267
1268 if (power != (unsigned short)-1) {
1269 switch (1 << power) {
1270 case MMC_VDD_165_195:
1271 pwr = SDHCI_POWER_180;
1272 break;
1273 case MMC_VDD_29_30:
1274 case MMC_VDD_30_31:
1275 pwr = SDHCI_POWER_300;
1276 break;
1277 case MMC_VDD_32_33:
1278 case MMC_VDD_33_34:
1279 pwr = SDHCI_POWER_330;
1280 break;
1281 default:
1282 BUG();
1283 }
1284 }
1285
1286 if (host->pwr == pwr)
1287 return -1;
1288
1289 host->pwr = pwr;
1290
1291 if (pwr == 0) {
1292 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
1293 if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
1294 sdhci_runtime_pm_bus_off(host);
1295 return 0;
1296 }
1297
1298 /*
1299 * Spec says that we should clear the power reg before setting
1300 * a new value. Some controllers don't seem to like this though.
1301 */
1302 if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
1303 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
1304
1305 /*
1306 * At least the Marvell CaFe chip gets confused if we set the voltage
1307 * and set turn on power at the same time, so set the voltage first.
1308 */
1309 if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
1310 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
1311
1312 pwr |= SDHCI_POWER_ON;
1313
1314 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
1315
1316 if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
1317 sdhci_runtime_pm_bus_on(host);
1318
1319 /*
1320 * Some controllers need an extra 10ms delay of 10ms before they
1321 * can apply clock after applying power
1322 */
1323 if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
1324 mdelay(10);
1325
1326 return power;
1327 }
1328
1329 /*****************************************************************************\
1330 * *
1331 * MMC callbacks *
1332 * *
1333 \*****************************************************************************/
1334
1335 static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1336 {
1337 struct sdhci_host *host;
1338 int present;
1339 unsigned long flags;
1340 u32 tuning_opcode;
1341
1342 host = mmc_priv(mmc);
1343
1344 sdhci_runtime_pm_get(host);
1345
1346 spin_lock_irqsave(&host->lock, flags);
1347
1348 WARN_ON(host->mrq != NULL);
1349
1350 #ifndef SDHCI_USE_LEDS_CLASS
1351 sdhci_activate_led(host);
1352 #endif
1353
1354 /*
1355 * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED
1356 * requests if Auto-CMD12 is enabled.
1357 */
1358 if (!mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) {
1359 if (mrq->stop) {
1360 mrq->data->stop = NULL;
1361 mrq->stop = NULL;
1362 }
1363 }
1364
1365 host->mrq = mrq;
1366
1367 /*
1368 * Firstly check card presence from cd-gpio. The return could
1369 * be one of the following possibilities:
1370 * negative: cd-gpio is not available
1371 * zero: cd-gpio is used, and card is removed
1372 * one: cd-gpio is used, and card is present
1373 */
1374 present = mmc_gpio_get_cd(host->mmc);
1375 if (present < 0) {
1376 /* If polling, assume that the card is always present. */
1377 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
1378 present = 1;
1379 else
1380 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
1381 SDHCI_CARD_PRESENT;
1382 }
1383
1384 if (!present || host->flags & SDHCI_DEVICE_DEAD) {
1385 host->mrq->cmd->error = -ENOMEDIUM;
1386 tasklet_schedule(&host->finish_tasklet);
1387 } else {
1388 u32 present_state;
1389
1390 present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
1391 /*
1392 * Check if the re-tuning timer has already expired and there
1393 * is no on-going data transfer. If so, we need to execute
1394 * tuning procedure before sending command.
1395 */
1396 if ((host->flags & SDHCI_NEEDS_RETUNING) &&
1397 !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) {
1398 if (mmc->card) {
1399 /* eMMC uses cmd21 but sd and sdio use cmd19 */
1400 tuning_opcode =
1401 mmc->card->type == MMC_TYPE_MMC ?
1402 MMC_SEND_TUNING_BLOCK_HS200 :
1403 MMC_SEND_TUNING_BLOCK;
1404
1405 /* Here we need to set the host->mrq to NULL,
1406 * in case the pending finish_tasklet
1407 * finishes it incorrectly.
1408 */
1409 host->mrq = NULL;
1410
1411 spin_unlock_irqrestore(&host->lock, flags);
1412 sdhci_execute_tuning(mmc, tuning_opcode);
1413 spin_lock_irqsave(&host->lock, flags);
1414
1415 /* Restore original mmc_request structure */
1416 host->mrq = mrq;
1417 }
1418 }
1419
1420 if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
1421 sdhci_send_command(host, mrq->sbc);
1422 else
1423 sdhci_send_command(host, mrq->cmd);
1424 }
1425
1426 mmiowb();
1427 spin_unlock_irqrestore(&host->lock, flags);
1428 }
1429
1430 static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
1431 {
1432 unsigned long flags;
1433 int vdd_bit = -1;
1434 u8 ctrl;
1435
1436 spin_lock_irqsave(&host->lock, flags);
1437
1438 if (host->flags & SDHCI_DEVICE_DEAD) {
1439 spin_unlock_irqrestore(&host->lock, flags);
1440 if (host->vmmc && ios->power_mode == MMC_POWER_OFF)
1441 mmc_regulator_set_ocr(host->mmc, host->vmmc, 0);
1442 return;
1443 }
1444
1445 /*
1446 * Reset the chip on each power off.
1447 * Should clear out any weird states.
1448 */
1449 if (ios->power_mode == MMC_POWER_OFF) {
1450 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
1451 sdhci_reinit(host);
1452 }
1453
1454 if (host->version >= SDHCI_SPEC_300 &&
1455 (ios->power_mode == MMC_POWER_UP) &&
1456 !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
1457 sdhci_enable_preset_value(host, false);
1458
1459 sdhci_set_clock(host, ios->clock);
1460
1461 if (ios->power_mode == MMC_POWER_OFF)
1462 vdd_bit = sdhci_set_power(host, -1);
1463 else
1464 vdd_bit = sdhci_set_power(host, ios->vdd);
1465
1466 if (host->vmmc && vdd_bit != -1) {
1467 spin_unlock_irqrestore(&host->lock, flags);
1468 mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd_bit);
1469 spin_lock_irqsave(&host->lock, flags);
1470 }
1471
1472 if (host->ops->platform_send_init_74_clocks)
1473 host->ops->platform_send_init_74_clocks(host, ios->power_mode);
1474
1475 /*
1476 * If your platform has 8-bit width support but is not a v3 controller,
1477 * or if it requires special setup code, you should implement that in
1478 * platform_bus_width().
1479 */
1480 if (host->ops->platform_bus_width) {
1481 host->ops->platform_bus_width(host, ios->bus_width);
1482 } else {
1483 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
1484 if (ios->bus_width == MMC_BUS_WIDTH_8) {
1485 ctrl &= ~SDHCI_CTRL_4BITBUS;
1486 if (host->version >= SDHCI_SPEC_300)
1487 ctrl |= SDHCI_CTRL_8BITBUS;
1488 } else {
1489 if (host->version >= SDHCI_SPEC_300)
1490 ctrl &= ~SDHCI_CTRL_8BITBUS;
1491 if (ios->bus_width == MMC_BUS_WIDTH_4)
1492 ctrl |= SDHCI_CTRL_4BITBUS;
1493 else
1494 ctrl &= ~SDHCI_CTRL_4BITBUS;
1495 }
1496 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1497 }
1498
1499 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
1500
1501 if ((ios->timing == MMC_TIMING_SD_HS ||
1502 ios->timing == MMC_TIMING_MMC_HS)
1503 && !(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT))
1504 ctrl |= SDHCI_CTRL_HISPD;
1505 else
1506 ctrl &= ~SDHCI_CTRL_HISPD;
1507
1508 if (host->version >= SDHCI_SPEC_300) {
1509 u16 clk, ctrl_2;
1510
1511 /* In case of UHS-I modes, set High Speed Enable */
1512 if ((ios->timing == MMC_TIMING_MMC_HS200) ||
1513 (ios->timing == MMC_TIMING_UHS_SDR50) ||
1514 (ios->timing == MMC_TIMING_UHS_SDR104) ||
1515 (ios->timing == MMC_TIMING_UHS_DDR50) ||
1516 (ios->timing == MMC_TIMING_UHS_SDR25))
1517 ctrl |= SDHCI_CTRL_HISPD;
1518
1519 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1520 if (!(ctrl_2 & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
1521 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1522 /*
1523 * We only need to set Driver Strength if the
1524 * preset value enable is not set.
1525 */
1526 ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
1527 if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
1528 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
1529 else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C)
1530 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C;
1531
1532 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
1533 } else {
1534 /*
1535 * According to SDHC Spec v3.00, if the Preset Value
1536 * Enable in the Host Control 2 register is set, we
1537 * need to reset SD Clock Enable before changing High
1538 * Speed Enable to avoid generating clock gliches.
1539 */
1540
1541 /* Reset SD Clock Enable */
1542 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1543 clk &= ~SDHCI_CLOCK_CARD_EN;
1544 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1545
1546 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1547
1548 /* Re-enable SD Clock */
1549 sdhci_update_clock(host);
1550 }
1551
1552
1553 /* Reset SD Clock Enable */
1554 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1555 clk &= ~SDHCI_CLOCK_CARD_EN;
1556 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1557
1558 if (host->ops->set_uhs_signaling)
1559 host->ops->set_uhs_signaling(host, ios->timing);
1560 else {
1561 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1562 /* Select Bus Speed Mode for host */
1563 ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
1564 if ((ios->timing == MMC_TIMING_MMC_HS200) ||
1565 (ios->timing == MMC_TIMING_UHS_SDR104))
1566 ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
1567 else if (ios->timing == MMC_TIMING_UHS_SDR12)
1568 ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
1569 else if (ios->timing == MMC_TIMING_UHS_SDR25)
1570 ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
1571 else if (ios->timing == MMC_TIMING_UHS_SDR50)
1572 ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
1573 else if (ios->timing == MMC_TIMING_UHS_DDR50)
1574 ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
1575 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
1576 }
1577
1578 if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
1579 ((ios->timing == MMC_TIMING_UHS_SDR12) ||
1580 (ios->timing == MMC_TIMING_UHS_SDR25) ||
1581 (ios->timing == MMC_TIMING_UHS_SDR50) ||
1582 (ios->timing == MMC_TIMING_UHS_SDR104) ||
1583 (ios->timing == MMC_TIMING_UHS_DDR50))) {
1584 u16 preset;
1585
1586 sdhci_enable_preset_value(host, true);
1587 preset = sdhci_get_preset_value(host);
1588 ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK)
1589 >> SDHCI_PRESET_DRV_SHIFT;
1590 }
1591
1592 /* Re-enable SD Clock */
1593 sdhci_update_clock(host);
1594 } else
1595 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1596
1597 /*
1598 * Some (ENE) controllers go apeshit on some ios operation,
1599 * signalling timeout and CRC errors even on CMD0. Resetting
1600 * it on each ios seems to solve the problem.
1601 */
1602 if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
1603 sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
1604
1605 mmiowb();
1606 spin_unlock_irqrestore(&host->lock, flags);
1607 }
1608
1609 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1610 {
1611 struct sdhci_host *host = mmc_priv(mmc);
1612
1613 sdhci_runtime_pm_get(host);
1614 sdhci_do_set_ios(host, ios);
1615 sdhci_runtime_pm_put(host);
1616 }
1617
1618 static int sdhci_do_get_cd(struct sdhci_host *host)
1619 {
1620 int gpio_cd = mmc_gpio_get_cd(host->mmc);
1621
1622 if (host->flags & SDHCI_DEVICE_DEAD)
1623 return 0;
1624
1625 /* If polling/nonremovable, assume that the card is always present. */
1626 if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
1627 (host->mmc->caps & MMC_CAP_NONREMOVABLE))
1628 return 1;
1629
1630 /* Try slot gpio detect */
1631 if (!IS_ERR_VALUE(gpio_cd))
1632 return !!gpio_cd;
1633
1634 /* Host native card detect */
1635 return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
1636 }
1637
1638 static int sdhci_get_cd(struct mmc_host *mmc)
1639 {
1640 struct sdhci_host *host = mmc_priv(mmc);
1641 int ret;
1642
1643 sdhci_runtime_pm_get(host);
1644 ret = sdhci_do_get_cd(host);
1645 sdhci_runtime_pm_put(host);
1646 return ret;
1647 }
1648
1649 static int sdhci_check_ro(struct sdhci_host *host)
1650 {
1651 unsigned long flags;
1652 int is_readonly;
1653
1654 spin_lock_irqsave(&host->lock, flags);
1655
1656 if (host->flags & SDHCI_DEVICE_DEAD)
1657 is_readonly = 0;
1658 else if (host->ops->get_ro)
1659 is_readonly = host->ops->get_ro(host);
1660 else
1661 is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
1662 & SDHCI_WRITE_PROTECT);
1663
1664 spin_unlock_irqrestore(&host->lock, flags);
1665
1666 /* This quirk needs to be replaced by a callback-function later */
1667 return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ?
1668 !is_readonly : is_readonly;
1669 }
1670
1671 #define SAMPLE_COUNT 5
1672
1673 static int sdhci_do_get_ro(struct sdhci_host *host)
1674 {
1675 int i, ro_count;
1676
1677 if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT))
1678 return sdhci_check_ro(host);
1679
1680 ro_count = 0;
1681 for (i = 0; i < SAMPLE_COUNT; i++) {
1682 if (sdhci_check_ro(host)) {
1683 if (++ro_count > SAMPLE_COUNT / 2)
1684 return 1;
1685 }
1686 msleep(30);
1687 }
1688 return 0;
1689 }
1690
1691 static void sdhci_hw_reset(struct mmc_host *mmc)
1692 {
1693 struct sdhci_host *host = mmc_priv(mmc);
1694
1695 if (host->ops && host->ops->hw_reset)
1696 host->ops->hw_reset(host);
1697 }
1698
1699 static int sdhci_get_ro(struct mmc_host *mmc)
1700 {
1701 struct sdhci_host *host = mmc_priv(mmc);
1702 int ret;
1703
1704 sdhci_runtime_pm_get(host);
1705 ret = sdhci_do_get_ro(host);
1706 sdhci_runtime_pm_put(host);
1707 return ret;
1708 }
1709
1710 static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable)
1711 {
1712 if (host->flags & SDHCI_DEVICE_DEAD)
1713 goto out;
1714
1715 if (enable)
1716 host->flags |= SDHCI_SDIO_IRQ_ENABLED;
1717 else
1718 host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
1719
1720 /* SDIO IRQ will be enabled as appropriate in runtime resume */
1721 if (host->runtime_suspended)
1722 goto out;
1723
1724 if (enable)
1725 sdhci_unmask_irqs(host, SDHCI_INT_CARD_INT);
1726 else
1727 sdhci_mask_irqs(host, SDHCI_INT_CARD_INT);
1728 out:
1729 mmiowb();
1730 }
1731
1732 static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1733 {
1734 struct sdhci_host *host = mmc_priv(mmc);
1735 unsigned long flags;
1736
1737 spin_lock_irqsave(&host->lock, flags);
1738 sdhci_enable_sdio_irq_nolock(host, enable);
1739 spin_unlock_irqrestore(&host->lock, flags);
1740 }
1741
1742 static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
1743 struct mmc_ios *ios)
1744 {
1745 u16 ctrl;
1746 int ret;
1747
1748 /*
1749 * Signal Voltage Switching is only applicable for Host Controllers
1750 * v3.00 and above.
1751 */
1752 if (host->version < SDHCI_SPEC_300)
1753 return 0;
1754
1755 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1756
1757 switch (ios->signal_voltage) {
1758 case MMC_SIGNAL_VOLTAGE_330:
1759 /* Set 1.8V Signal Enable in the Host Control2 register to 0 */
1760 ctrl &= ~SDHCI_CTRL_VDD_180;
1761 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1762
1763 if (host->vqmmc) {
1764 ret = regulator_set_voltage(host->vqmmc, 2700000, 3600000);
1765 if (ret) {
1766 pr_warning("%s: Switching to 3.3V signalling voltage "
1767 " failed\n", mmc_hostname(host->mmc));
1768 return -EIO;
1769 }
1770 }
1771 /* Wait for 5ms */
1772 usleep_range(5000, 5500);
1773
1774 /* 3.3V regulator output should be stable within 5 ms */
1775 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1776 if (!(ctrl & SDHCI_CTRL_VDD_180))
1777 return 0;
1778
1779 pr_warning("%s: 3.3V regulator output did not became stable\n",
1780 mmc_hostname(host->mmc));
1781
1782 return -EAGAIN;
1783 case MMC_SIGNAL_VOLTAGE_180:
1784 if (host->vqmmc) {
1785 ret = regulator_set_voltage(host->vqmmc,
1786 1700000, 1950000);
1787 if (ret) {
1788 pr_warning("%s: Switching to 1.8V signalling voltage "
1789 " failed\n", mmc_hostname(host->mmc));
1790 return -EIO;
1791 }
1792 }
1793
1794 /*
1795 * Enable 1.8V Signal Enable in the Host Control2
1796 * register
1797 */
1798 ctrl |= SDHCI_CTRL_VDD_180;
1799 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1800
1801 /* Wait for 5ms */
1802 usleep_range(5000, 5500);
1803
1804 /* 1.8V regulator output should be stable within 5 ms */
1805 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1806 if (ctrl & SDHCI_CTRL_VDD_180)
1807 return 0;
1808
1809 pr_warning("%s: 1.8V regulator output did not became stable\n",
1810 mmc_hostname(host->mmc));
1811
1812 return -EAGAIN;
1813 case MMC_SIGNAL_VOLTAGE_120:
1814 if (host->vqmmc) {
1815 ret = regulator_set_voltage(host->vqmmc, 1100000, 1300000);
1816 if (ret) {
1817 pr_warning("%s: Switching to 1.2V signalling voltage "
1818 " failed\n", mmc_hostname(host->mmc));
1819 return -EIO;
1820 }
1821 }
1822 return 0;
1823 default:
1824 /* No signal voltage switch required */
1825 return 0;
1826 }
1827 }
1828
1829 static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
1830 struct mmc_ios *ios)
1831 {
1832 struct sdhci_host *host = mmc_priv(mmc);
1833 int err;
1834
1835 if (host->version < SDHCI_SPEC_300)
1836 return 0;
1837 sdhci_runtime_pm_get(host);
1838 err = sdhci_do_start_signal_voltage_switch(host, ios);
1839 sdhci_runtime_pm_put(host);
1840 return err;
1841 }
1842
1843 static int sdhci_card_busy(struct mmc_host *mmc)
1844 {
1845 struct sdhci_host *host = mmc_priv(mmc);
1846 u32 present_state;
1847
1848 sdhci_runtime_pm_get(host);
1849 /* Check whether DAT[3:0] is 0000 */
1850 present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
1851 sdhci_runtime_pm_put(host);
1852
1853 return !(present_state & SDHCI_DATA_LVL_MASK);
1854 }
1855
1856 static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
1857 {
1858 struct sdhci_host *host;
1859 u16 ctrl;
1860 u32 ier;
1861 int tuning_loop_counter = MAX_TUNING_LOOP;
1862 unsigned long timeout;
1863 int err = 0;
1864 bool requires_tuning_nonuhs = false;
1865 unsigned long flags;
1866
1867 host = mmc_priv(mmc);
1868
1869 sdhci_runtime_pm_get(host);
1870 spin_lock_irqsave(&host->lock, flags);
1871
1872 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1873
1874 /*
1875 * The Host Controller needs tuning only in case of SDR104 mode
1876 * and for SDR50 mode when Use Tuning for SDR50 is set in the
1877 * Capabilities register.
1878 * If the Host Controller supports the HS200 mode then the
1879 * tuning function has to be executed.
1880 */
1881 if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR50) &&
1882 (host->flags & SDHCI_SDR50_NEEDS_TUNING ||
1883 host->flags & SDHCI_SDR104_NEEDS_TUNING))
1884 requires_tuning_nonuhs = true;
1885
1886 if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR104) ||
1887 requires_tuning_nonuhs)
1888 ctrl |= SDHCI_CTRL_EXEC_TUNING;
1889 else {
1890 spin_unlock_irqrestore(&host->lock, flags);
1891 sdhci_runtime_pm_put(host);
1892 return 0;
1893 }
1894
1895 if (host->ops->platform_execute_tuning) {
1896 spin_unlock_irqrestore(&host->lock, flags);
1897 err = host->ops->platform_execute_tuning(host, opcode);
1898 sdhci_runtime_pm_put(host);
1899 return err;
1900 }
1901
1902 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1903
1904 /*
1905 * As per the Host Controller spec v3.00, tuning command
1906 * generates Buffer Read Ready interrupt, so enable that.
1907 *
1908 * Note: The spec clearly says that when tuning sequence
1909 * is being performed, the controller does not generate
1910 * interrupts other than Buffer Read Ready interrupt. But
1911 * to make sure we don't hit a controller bug, we _only_
1912 * enable Buffer Read Ready interrupt here.
1913 */
1914 ier = sdhci_readl(host, SDHCI_INT_ENABLE);
1915 sdhci_clear_set_irqs(host, ier, SDHCI_INT_DATA_AVAIL);
1916
1917 /*
1918 * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number
1919 * of loops reaches 40 times or a timeout of 150ms occurs.
1920 */
1921 timeout = 150;
1922 do {
1923 struct mmc_command cmd = {0};
1924 struct mmc_request mrq = {NULL};
1925
1926 if (!tuning_loop_counter && !timeout)
1927 break;
1928
1929 cmd.opcode = opcode;
1930 cmd.arg = 0;
1931 cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
1932 cmd.retries = 0;
1933 cmd.data = NULL;
1934 cmd.error = 0;
1935
1936 mrq.cmd = &cmd;
1937 host->mrq = &mrq;
1938
1939 /*
1940 * In response to CMD19, the card sends 64 bytes of tuning
1941 * block to the Host Controller. So we set the block size
1942 * to 64 here.
1943 */
1944 if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200) {
1945 if (mmc->ios.bus_width == MMC_BUS_WIDTH_8)
1946 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128),
1947 SDHCI_BLOCK_SIZE);
1948 else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4)
1949 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
1950 SDHCI_BLOCK_SIZE);
1951 } else {
1952 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
1953 SDHCI_BLOCK_SIZE);
1954 }
1955
1956 /*
1957 * The tuning block is sent by the card to the host controller.
1958 * So we set the TRNS_READ bit in the Transfer Mode register.
1959 * This also takes care of setting DMA Enable and Multi Block
1960 * Select in the same register to 0.
1961 */
1962 sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
1963
1964 sdhci_send_command(host, &cmd);
1965
1966 host->cmd = NULL;
1967 host->mrq = NULL;
1968
1969 spin_unlock_irqrestore(&host->lock, flags);
1970 /* Wait for Buffer Read Ready interrupt */
1971 wait_event_interruptible_timeout(host->buf_ready_int,
1972 (host->tuning_done == 1),
1973 msecs_to_jiffies(50));
1974 spin_lock_irqsave(&host->lock, flags);
1975
1976 if (!host->tuning_done) {
1977 pr_info(DRIVER_NAME ": Timeout waiting for "
1978 "Buffer Read Ready interrupt during tuning "
1979 "procedure, falling back to fixed sampling "
1980 "clock\n");
1981 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1982 ctrl &= ~SDHCI_CTRL_TUNED_CLK;
1983 ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
1984 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1985
1986 err = -EIO;
1987 goto out;
1988 }
1989
1990 host->tuning_done = 0;
1991
1992 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1993 tuning_loop_counter--;
1994 timeout--;
1995 mdelay(1);
1996 } while (ctrl & SDHCI_CTRL_EXEC_TUNING);
1997
1998 /*
1999 * The Host Driver has exhausted the maximum number of loops allowed,
2000 * so use fixed sampling frequency.
2001 */
2002 if (!tuning_loop_counter || !timeout) {
2003 ctrl &= ~SDHCI_CTRL_TUNED_CLK;
2004 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
2005 err = -EIO;
2006 } else {
2007 if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
2008 pr_info(DRIVER_NAME ": Tuning procedure"
2009 " failed, falling back to fixed sampling"
2010 " clock\n");
2011 err = -EIO;
2012 }
2013 }
2014
2015 out:
2016 /*
2017 * If this is the very first time we are here, we start the retuning
2018 * timer. Since only during the first time, SDHCI_NEEDS_RETUNING
2019 * flag won't be set, we check this condition before actually starting
2020 * the timer.
2021 */
2022 if (!(host->flags & SDHCI_NEEDS_RETUNING) && host->tuning_count &&
2023 (host->tuning_mode == SDHCI_TUNING_MODE_1)) {
2024 host->flags |= SDHCI_USING_RETUNING_TIMER;
2025 mod_timer(&host->tuning_timer, jiffies +
2026 host->tuning_count * HZ);
2027 /* Tuning mode 1 limits the maximum data length to 4MB */
2028 mmc->max_blk_count = (4 * 1024 * 1024) / mmc->max_blk_size;
2029 } else {
2030 host->flags &= ~SDHCI_NEEDS_RETUNING;
2031 /* Reload the new initial value for timer */
2032 if (host->tuning_mode == SDHCI_TUNING_MODE_1)
2033 mod_timer(&host->tuning_timer, jiffies +
2034 host->tuning_count * HZ);
2035 }
2036
2037 /*
2038 * In case tuning fails, host controllers which support re-tuning can
2039 * try tuning again at a later time, when the re-tuning timer expires.
2040 * So for these controllers, we return 0. Since there might be other
2041 * controllers who do not have this capability, we return error for
2042 * them. SDHCI_USING_RETUNING_TIMER means the host is currently using
2043 * a retuning timer to do the retuning for the card.
2044 */
2045 if (err && (host->flags & SDHCI_USING_RETUNING_TIMER))
2046 err = 0;
2047
2048 sdhci_clear_set_irqs(host, SDHCI_INT_DATA_AVAIL, ier);
2049 spin_unlock_irqrestore(&host->lock, flags);
2050 sdhci_runtime_pm_put(host);
2051
2052 return err;
2053 }
2054
2055
2056 static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
2057 {
2058 u16 ctrl;
2059
2060 /* Host Controller v3.00 defines preset value registers */
2061 if (host->version < SDHCI_SPEC_300)
2062 return;
2063
2064 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
2065
2066 /*
2067 * We only enable or disable Preset Value if they are not already
2068 * enabled or disabled respectively. Otherwise, we bail out.
2069 */
2070 if (enable && !(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
2071 ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
2072 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
2073 host->flags |= SDHCI_PV_ENABLED;
2074 } else if (!enable && (ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
2075 ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
2076 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
2077 host->flags &= ~SDHCI_PV_ENABLED;
2078 }
2079 }
2080
2081 static void sdhci_card_event(struct mmc_host *mmc)
2082 {
2083 struct sdhci_host *host = mmc_priv(mmc);
2084 unsigned long flags;
2085
2086 /* First check if client has provided their own card event */
2087 if (host->ops->card_event)
2088 host->ops->card_event(host);
2089
2090 spin_lock_irqsave(&host->lock, flags);
2091
2092 /* Check host->mrq first in case we are runtime suspended */
2093 if (host->mrq && !sdhci_do_get_cd(host)) {
2094 pr_err("%s: Card removed during transfer!\n",
2095 mmc_hostname(host->mmc));
2096 pr_err("%s: Resetting controller.\n",
2097 mmc_hostname(host->mmc));
2098
2099 sdhci_reset(host, SDHCI_RESET_CMD);
2100 sdhci_reset(host, SDHCI_RESET_DATA);
2101
2102 host->mrq->cmd->error = -ENOMEDIUM;
2103 tasklet_schedule(&host->finish_tasklet);
2104 }
2105
2106 spin_unlock_irqrestore(&host->lock, flags);
2107 }
2108
2109 static const struct mmc_host_ops sdhci_ops = {
2110 .request = sdhci_request,
2111 .set_ios = sdhci_set_ios,
2112 .get_cd = sdhci_get_cd,
2113 .get_ro = sdhci_get_ro,
2114 .hw_reset = sdhci_hw_reset,
2115 .enable_sdio_irq = sdhci_enable_sdio_irq,
2116 .start_signal_voltage_switch = sdhci_start_signal_voltage_switch,
2117 .execute_tuning = sdhci_execute_tuning,
2118 .card_event = sdhci_card_event,
2119 .card_busy = sdhci_card_busy,
2120 };
2121
2122 /*****************************************************************************\
2123 * *
2124 * Tasklets *
2125 * *
2126 \*****************************************************************************/
2127
2128 static void sdhci_tasklet_card(unsigned long param)
2129 {
2130 struct sdhci_host *host = (struct sdhci_host*)param;
2131
2132 sdhci_card_event(host->mmc);
2133
2134 mmc_detect_change(host->mmc, msecs_to_jiffies(200));
2135 }
2136
2137 static void sdhci_tasklet_finish(unsigned long param)
2138 {
2139 struct sdhci_host *host;
2140 unsigned long flags;
2141 struct mmc_request *mrq;
2142
2143 host = (struct sdhci_host*)param;
2144
2145 spin_lock_irqsave(&host->lock, flags);
2146
2147 /*
2148 * If this tasklet gets rescheduled while running, it will
2149 * be run again afterwards but without any active request.
2150 */
2151 if (!host->mrq) {
2152 spin_unlock_irqrestore(&host->lock, flags);
2153 return;
2154 }
2155
2156 del_timer(&host->timer);
2157
2158 mrq = host->mrq;
2159
2160 /*
2161 * The controller needs a reset of internal state machines
2162 * upon error conditions.
2163 */
2164 if (!(host->flags & SDHCI_DEVICE_DEAD) &&
2165 ((mrq->cmd && mrq->cmd->error) ||
2166 (mrq->data && (mrq->data->error ||
2167 (mrq->data->stop && mrq->data->stop->error))) ||
2168 (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
2169
2170 /* Some controllers need this kick or reset won't work here */
2171 if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
2172 /* This is to force an update */
2173 sdhci_update_clock(host);
2174
2175 /* Spec says we should do both at the same time, but Ricoh
2176 controllers do not like that. */
2177 sdhci_reset(host, SDHCI_RESET_CMD);
2178 sdhci_reset(host, SDHCI_RESET_DATA);
2179 }
2180
2181 host->mrq = NULL;
2182 host->cmd = NULL;
2183 host->data = NULL;
2184
2185 #ifndef SDHCI_USE_LEDS_CLASS
2186 sdhci_deactivate_led(host);
2187 #endif
2188
2189 mmiowb();
2190 spin_unlock_irqrestore(&host->lock, flags);
2191
2192 mmc_request_done(host->mmc, mrq);
2193 sdhci_runtime_pm_put(host);
2194 }
2195
2196 static void sdhci_timeout_timer(unsigned long data)
2197 {
2198 struct sdhci_host *host;
2199 unsigned long flags;
2200
2201 host = (struct sdhci_host*)data;
2202
2203 spin_lock_irqsave(&host->lock, flags);
2204
2205 if (host->mrq) {
2206 pr_err("%s: Timeout waiting for hardware "
2207 "interrupt.\n", mmc_hostname(host->mmc));
2208 sdhci_dumpregs(host);
2209
2210 if (host->data) {
2211 host->data->error = -ETIMEDOUT;
2212 sdhci_finish_data(host);
2213 } else {
2214 if (host->cmd)
2215 host->cmd->error = -ETIMEDOUT;
2216 else
2217 host->mrq->cmd->error = -ETIMEDOUT;
2218
2219 tasklet_schedule(&host->finish_tasklet);
2220 }
2221 }
2222
2223 mmiowb();
2224 spin_unlock_irqrestore(&host->lock, flags);
2225 }
2226
2227 static void sdhci_tuning_timer(unsigned long data)
2228 {
2229 struct sdhci_host *host;
2230 unsigned long flags;
2231
2232 host = (struct sdhci_host *)data;
2233
2234 spin_lock_irqsave(&host->lock, flags);
2235
2236 host->flags |= SDHCI_NEEDS_RETUNING;
2237
2238 spin_unlock_irqrestore(&host->lock, flags);
2239 }
2240
2241 /*****************************************************************************\
2242 * *
2243 * Interrupt handling *
2244 * *
2245 \*****************************************************************************/
2246
2247 static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
2248 {
2249 BUG_ON(intmask == 0);
2250
2251 if (!host->cmd) {
2252 pr_err("%s: Got command interrupt 0x%08x even "
2253 "though no command operation was in progress.\n",
2254 mmc_hostname(host->mmc), (unsigned)intmask);
2255 sdhci_dumpregs(host);
2256 return;
2257 }
2258
2259 if (intmask & SDHCI_INT_TIMEOUT)
2260 host->cmd->error = -ETIMEDOUT;
2261 else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
2262 SDHCI_INT_INDEX))
2263 host->cmd->error = -EILSEQ;
2264
2265 if (host->cmd->error) {
2266 tasklet_schedule(&host->finish_tasklet);
2267 return;
2268 }
2269
2270 /*
2271 * The host can send and interrupt when the busy state has
2272 * ended, allowing us to wait without wasting CPU cycles.
2273 * Unfortunately this is overloaded on the "data complete"
2274 * interrupt, so we need to take some care when handling
2275 * it.
2276 *
2277 * Note: The 1.0 specification is a bit ambiguous about this
2278 * feature so there might be some problems with older
2279 * controllers.
2280 */
2281 if (host->cmd->flags & MMC_RSP_BUSY) {
2282 if (host->cmd->data)
2283 DBG("Cannot wait for busy signal when also "
2284 "doing a data transfer");
2285 else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
2286 return;
2287
2288 /* The controller does not support the end-of-busy IRQ,
2289 * fall through and take the SDHCI_INT_RESPONSE */
2290 }
2291
2292 if (intmask & SDHCI_INT_RESPONSE)
2293 sdhci_finish_command(host);
2294 }
2295
2296 #ifdef CONFIG_MMC_DEBUG
2297 static void sdhci_show_adma_error(struct sdhci_host *host)
2298 {
2299 const char *name = mmc_hostname(host->mmc);
2300 u8 *desc = host->adma_desc;
2301 __le32 *dma;
2302 __le16 *len;
2303 u8 attr;
2304
2305 sdhci_dumpregs(host);
2306
2307 while (true) {
2308 dma = (__le32 *)(desc + 4);
2309 len = (__le16 *)(desc + 2);
2310 attr = *desc;
2311
2312 DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
2313 name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr);
2314
2315 desc += 8;
2316
2317 if (attr & 2)
2318 break;
2319 }
2320 }
2321 #else
2322 static void sdhci_show_adma_error(struct sdhci_host *host) { }
2323 #endif
2324
2325 static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
2326 {
2327 u32 command;
2328 BUG_ON(intmask == 0);
2329
2330 /* CMD19 generates _only_ Buffer Read Ready interrupt */
2331 if (intmask & SDHCI_INT_DATA_AVAIL) {
2332 command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND));
2333 if (command == MMC_SEND_TUNING_BLOCK ||
2334 command == MMC_SEND_TUNING_BLOCK_HS200) {
2335 host->tuning_done = 1;
2336 wake_up(&host->buf_ready_int);
2337 return;
2338 }
2339 }
2340
2341 if (!host->data) {
2342 /*
2343 * The "data complete" interrupt is also used to
2344 * indicate that a busy state has ended. See comment
2345 * above in sdhci_cmd_irq().
2346 */
2347 if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
2348 if (intmask & SDHCI_INT_DATA_END) {
2349 sdhci_finish_command(host);
2350 return;
2351 }
2352 }
2353
2354 pr_err("%s: Got data interrupt 0x%08x even "
2355 "though no data operation was in progress.\n",
2356 mmc_hostname(host->mmc), (unsigned)intmask);
2357 sdhci_dumpregs(host);
2358
2359 return;
2360 }
2361
2362 if (intmask & SDHCI_INT_DATA_TIMEOUT)
2363 host->data->error = -ETIMEDOUT;
2364 else if (intmask & SDHCI_INT_DATA_END_BIT)
2365 host->data->error = -EILSEQ;
2366 else if ((intmask & SDHCI_INT_DATA_CRC) &&
2367 SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
2368 != MMC_BUS_TEST_R)
2369 host->data->error = -EILSEQ;
2370 else if (intmask & SDHCI_INT_ADMA_ERROR) {
2371 pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
2372 sdhci_show_adma_error(host);
2373 host->data->error = -EIO;
2374 if (host->ops->adma_workaround)
2375 host->ops->adma_workaround(host, intmask);
2376 }
2377
2378 if (host->data->error)
2379 sdhci_finish_data(host);
2380 else {
2381 if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
2382 sdhci_transfer_pio(host);
2383
2384 /*
2385 * We currently don't do anything fancy with DMA
2386 * boundaries, but as we can't disable the feature
2387 * we need to at least restart the transfer.
2388 *
2389 * According to the spec sdhci_readl(host, SDHCI_DMA_ADDRESS)
2390 * should return a valid address to continue from, but as
2391 * some controllers are faulty, don't trust them.
2392 */
2393 if (intmask & SDHCI_INT_DMA_END) {
2394 u32 dmastart, dmanow;
2395 dmastart = sg_dma_address(host->data->sg);
2396 dmanow = dmastart + host->data->bytes_xfered;
2397 /*
2398 * Force update to the next DMA block boundary.
2399 */
2400 dmanow = (dmanow &
2401 ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
2402 SDHCI_DEFAULT_BOUNDARY_SIZE;
2403 host->data->bytes_xfered = dmanow - dmastart;
2404 DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes,"
2405 " next 0x%08x\n",
2406 mmc_hostname(host->mmc), dmastart,
2407 host->data->bytes_xfered, dmanow);
2408 sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
2409 }
2410
2411 if (intmask & SDHCI_INT_DATA_END) {
2412 if (host->cmd) {
2413 /*
2414 * Data managed to finish before the
2415 * command completed. Make sure we do
2416 * things in the proper order.
2417 */
2418 host->data_early = 1;
2419 } else {
2420 sdhci_finish_data(host);
2421 }
2422 }
2423 }
2424 }
2425
2426 static irqreturn_t sdhci_irq(int irq, void *dev_id)
2427 {
2428 irqreturn_t result;
2429 struct sdhci_host *host = dev_id;
2430 u32 intmask, unexpected = 0;
2431 int cardint = 0, max_loops = 16;
2432
2433 spin_lock(&host->lock);
2434
2435 if (host->runtime_suspended) {
2436 spin_unlock(&host->lock);
2437 pr_warning("%s: got irq while runtime suspended\n",
2438 mmc_hostname(host->mmc));
2439 return IRQ_HANDLED;
2440 }
2441
2442 intmask = sdhci_readl(host, SDHCI_INT_STATUS);
2443
2444 if (!intmask || intmask == 0xffffffff) {
2445 result = IRQ_NONE;
2446 goto out;
2447 }
2448
2449 again:
2450 DBG("*** %s got interrupt: 0x%08x\n",
2451 mmc_hostname(host->mmc), intmask);
2452
2453 if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
2454 u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
2455 SDHCI_CARD_PRESENT;
2456
2457 /*
2458 * There is a observation on i.mx esdhc. INSERT bit will be
2459 * immediately set again when it gets cleared, if a card is
2460 * inserted. We have to mask the irq to prevent interrupt
2461 * storm which will freeze the system. And the REMOVE gets
2462 * the same situation.
2463 *
2464 * More testing are needed here to ensure it works for other
2465 * platforms though.
2466 */
2467 sdhci_mask_irqs(host, present ? SDHCI_INT_CARD_INSERT :
2468 SDHCI_INT_CARD_REMOVE);
2469 sdhci_unmask_irqs(host, present ? SDHCI_INT_CARD_REMOVE :
2470 SDHCI_INT_CARD_INSERT);
2471
2472 sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
2473 SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
2474 intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
2475 tasklet_schedule(&host->card_tasklet);
2476 }
2477
2478 if (intmask & SDHCI_INT_CMD_MASK) {
2479 sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
2480 SDHCI_INT_STATUS);
2481 sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
2482 }
2483
2484 if (intmask & SDHCI_INT_DATA_MASK) {
2485 sdhci_writel(host, intmask & SDHCI_INT_DATA_MASK,
2486 SDHCI_INT_STATUS);
2487 sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
2488 }
2489
2490 intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
2491
2492 intmask &= ~SDHCI_INT_ERROR;
2493
2494 if (intmask & SDHCI_INT_BUS_POWER) {
2495 pr_err("%s: Card is consuming too much power!\n",
2496 mmc_hostname(host->mmc));
2497 sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS);
2498 }
2499
2500 intmask &= ~SDHCI_INT_BUS_POWER;
2501
2502 if (intmask & SDHCI_INT_CARD_INT)
2503 cardint = 1;
2504
2505 intmask &= ~SDHCI_INT_CARD_INT;
2506
2507 if (intmask) {
2508 unexpected |= intmask;
2509 sdhci_writel(host, intmask, SDHCI_INT_STATUS);
2510 }
2511
2512 result = IRQ_HANDLED;
2513
2514 intmask = sdhci_readl(host, SDHCI_INT_STATUS);
2515
2516 /*
2517 * If we know we'll call the driver to signal SDIO IRQ, disregard
2518 * further indications of Card Interrupt in the status to avoid a
2519 * needless loop.
2520 */
2521 if (cardint)
2522 intmask &= ~SDHCI_INT_CARD_INT;
2523 if (intmask && --max_loops)
2524 goto again;
2525 out:
2526 spin_unlock(&host->lock);
2527
2528 if (unexpected) {
2529 pr_err("%s: Unexpected interrupt 0x%08x.\n",
2530 mmc_hostname(host->mmc), unexpected);
2531 sdhci_dumpregs(host);
2532 }
2533 /*
2534 * We have to delay this as it calls back into the driver.
2535 */
2536 if (cardint)
2537 mmc_signal_sdio_irq(host->mmc);
2538
2539 return result;
2540 }
2541
2542 /*****************************************************************************\
2543 * *
2544 * Suspend/resume *
2545 * *
2546 \*****************************************************************************/
2547
2548 #ifdef CONFIG_PM
2549 void sdhci_enable_irq_wakeups(struct sdhci_host *host)
2550 {
2551 u8 val;
2552 u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
2553 | SDHCI_WAKE_ON_INT;
2554
2555 val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
2556 val |= mask ;
2557 /* Avoid fake wake up */
2558 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
2559 val &= ~(SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE);
2560 sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
2561 }
2562 EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
2563
2564 void sdhci_disable_irq_wakeups(struct sdhci_host *host)
2565 {
2566 u8 val;
2567 u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
2568 | SDHCI_WAKE_ON_INT;
2569
2570 val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
2571 val &= ~mask;
2572 sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
2573 }
2574 EXPORT_SYMBOL_GPL(sdhci_disable_irq_wakeups);
2575
2576 int sdhci_suspend_host(struct sdhci_host *host)
2577 {
2578 if (host->ops->platform_suspend)
2579 host->ops->platform_suspend(host);
2580
2581 sdhci_disable_card_detection(host);
2582
2583 /* Disable tuning since we are suspending */
2584 if (host->flags & SDHCI_USING_RETUNING_TIMER) {
2585 del_timer_sync(&host->tuning_timer);
2586 host->flags &= ~SDHCI_NEEDS_RETUNING;
2587 }
2588
2589 if (!device_may_wakeup(mmc_dev(host->mmc))) {
2590 sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
2591 free_irq(host->irq, host);
2592 } else {
2593 sdhci_enable_irq_wakeups(host);
2594 enable_irq_wake(host->irq);
2595 }
2596 return 0;
2597 }
2598
2599 EXPORT_SYMBOL_GPL(sdhci_suspend_host);
2600
2601 int sdhci_resume_host(struct sdhci_host *host)
2602 {
2603 int ret = 0;
2604
2605 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
2606 if (host->ops->enable_dma)
2607 host->ops->enable_dma(host);
2608 }
2609
2610 if (!device_may_wakeup(mmc_dev(host->mmc))) {
2611 ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
2612 mmc_hostname(host->mmc), host);
2613 if (ret)
2614 return ret;
2615 } else {
2616 sdhci_disable_irq_wakeups(host);
2617 disable_irq_wake(host->irq);
2618 }
2619
2620 if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) &&
2621 (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) {
2622 /* Card keeps power but host controller does not */
2623 sdhci_init(host, 0);
2624 host->pwr = 0;
2625 host->clock = 0;
2626 sdhci_do_set_ios(host, &host->mmc->ios);
2627 } else {
2628 sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER));
2629 mmiowb();
2630 }
2631
2632 sdhci_enable_card_detection(host);
2633
2634 if (host->ops->platform_resume)
2635 host->ops->platform_resume(host);
2636
2637 /* Set the re-tuning expiration flag */
2638 if (host->flags & SDHCI_USING_RETUNING_TIMER)
2639 host->flags |= SDHCI_NEEDS_RETUNING;
2640
2641 return ret;
2642 }
2643
2644 EXPORT_SYMBOL_GPL(sdhci_resume_host);
2645 #endif /* CONFIG_PM */
2646
2647 #ifdef CONFIG_PM_RUNTIME
2648
2649 static int sdhci_runtime_pm_get(struct sdhci_host *host)
2650 {
2651 return pm_runtime_get_sync(host->mmc->parent);
2652 }
2653
2654 static int sdhci_runtime_pm_put(struct sdhci_host *host)
2655 {
2656 pm_runtime_mark_last_busy(host->mmc->parent);
2657 return pm_runtime_put_autosuspend(host->mmc->parent);
2658 }
2659
2660 static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
2661 {
2662 if (host->runtime_suspended || host->bus_on)
2663 return;
2664 host->bus_on = true;
2665 pm_runtime_get_noresume(host->mmc->parent);
2666 }
2667
2668 static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
2669 {
2670 if (host->runtime_suspended || !host->bus_on)
2671 return;
2672 host->bus_on = false;
2673 pm_runtime_put_noidle(host->mmc->parent);
2674 }
2675
2676 int sdhci_runtime_suspend_host(struct sdhci_host *host)
2677 {
2678 unsigned long flags;
2679 int ret = 0;
2680
2681 /* Disable tuning since we are suspending */
2682 if (host->flags & SDHCI_USING_RETUNING_TIMER) {
2683 del_timer_sync(&host->tuning_timer);
2684 host->flags &= ~SDHCI_NEEDS_RETUNING;
2685 }
2686
2687 spin_lock_irqsave(&host->lock, flags);
2688 sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
2689 spin_unlock_irqrestore(&host->lock, flags);
2690
2691 synchronize_irq(host->irq);
2692
2693 spin_lock_irqsave(&host->lock, flags);
2694 host->runtime_suspended = true;
2695 spin_unlock_irqrestore(&host->lock, flags);
2696
2697 return ret;
2698 }
2699 EXPORT_SYMBOL_GPL(sdhci_runtime_suspend_host);
2700
2701 int sdhci_runtime_resume_host(struct sdhci_host *host)
2702 {
2703 unsigned long flags;
2704 int ret = 0, host_flags = host->flags;
2705
2706 if (host_flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
2707 if (host->ops->enable_dma)
2708 host->ops->enable_dma(host);
2709 }
2710
2711 sdhci_init(host, 0);
2712
2713 /* Force clock and power re-program */
2714 host->pwr = 0;
2715 host->clock = 0;
2716 sdhci_do_set_ios(host, &host->mmc->ios);
2717
2718 sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
2719 if ((host_flags & SDHCI_PV_ENABLED) &&
2720 !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
2721 spin_lock_irqsave(&host->lock, flags);
2722 sdhci_enable_preset_value(host, true);
2723 spin_unlock_irqrestore(&host->lock, flags);
2724 }
2725
2726 /* Set the re-tuning expiration flag */
2727 if (host->flags & SDHCI_USING_RETUNING_TIMER)
2728 host->flags |= SDHCI_NEEDS_RETUNING;
2729
2730 spin_lock_irqsave(&host->lock, flags);
2731
2732 host->runtime_suspended = false;
2733
2734 /* Enable SDIO IRQ */
2735 if ((host->flags & SDHCI_SDIO_IRQ_ENABLED))
2736 sdhci_enable_sdio_irq_nolock(host, true);
2737
2738 /* Enable Card Detection */
2739 sdhci_enable_card_detection(host);
2740
2741 spin_unlock_irqrestore(&host->lock, flags);
2742
2743 return ret;
2744 }
2745 EXPORT_SYMBOL_GPL(sdhci_runtime_resume_host);
2746
2747 #endif
2748
2749 /*****************************************************************************\
2750 * *
2751 * Device allocation/registration *
2752 * *
2753 \*****************************************************************************/
2754
2755 struct sdhci_host *sdhci_alloc_host(struct device *dev,
2756 size_t priv_size)
2757 {
2758 struct mmc_host *mmc;
2759 struct sdhci_host *host;
2760
2761 WARN_ON(dev == NULL);
2762
2763 mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
2764 if (!mmc)
2765 return ERR_PTR(-ENOMEM);
2766
2767 host = mmc_priv(mmc);
2768 host->mmc = mmc;
2769
2770 return host;
2771 }
2772
2773 EXPORT_SYMBOL_GPL(sdhci_alloc_host);
2774
2775 int sdhci_add_host(struct sdhci_host *host)
2776 {
2777 struct mmc_host *mmc;
2778 u32 caps[2] = {0, 0};
2779 u32 max_current_caps;
2780 unsigned int ocr_avail;
2781 int ret;
2782
2783 WARN_ON(host == NULL);
2784 if (host == NULL)
2785 return -EINVAL;
2786
2787 mmc = host->mmc;
2788
2789 if (debug_quirks)
2790 host->quirks = debug_quirks;
2791 if (debug_quirks2)
2792 host->quirks2 = debug_quirks2;
2793
2794 sdhci_reset(host, SDHCI_RESET_ALL);
2795
2796 host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
2797 host->version = (host->version & SDHCI_SPEC_VER_MASK)
2798 >> SDHCI_SPEC_VER_SHIFT;
2799 if (host->version > SDHCI_SPEC_300) {
2800 pr_err("%s: Unknown controller version (%d). "
2801 "You may experience problems.\n", mmc_hostname(mmc),
2802 host->version);
2803 }
2804
2805 caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
2806 sdhci_readl(host, SDHCI_CAPABILITIES);
2807
2808 if (host->version >= SDHCI_SPEC_300)
2809 caps[1] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ?
2810 host->caps1 :
2811 sdhci_readl(host, SDHCI_CAPABILITIES_1);
2812
2813 if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
2814 host->flags |= SDHCI_USE_SDMA;
2815 else if (!(caps[0] & SDHCI_CAN_DO_SDMA))
2816 DBG("Controller doesn't have SDMA capability\n");
2817 else
2818 host->flags |= SDHCI_USE_SDMA;
2819
2820 if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
2821 (host->flags & SDHCI_USE_SDMA)) {
2822 DBG("Disabling DMA as it is marked broken\n");
2823 host->flags &= ~SDHCI_USE_SDMA;
2824 }
2825
2826 if ((host->version >= SDHCI_SPEC_200) &&
2827 (caps[0] & SDHCI_CAN_DO_ADMA2))
2828 host->flags |= SDHCI_USE_ADMA;
2829
2830 if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
2831 (host->flags & SDHCI_USE_ADMA)) {
2832 DBG("Disabling ADMA as it is marked broken\n");
2833 host->flags &= ~SDHCI_USE_ADMA;
2834 }
2835
2836 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
2837 if (host->ops->enable_dma) {
2838 if (host->ops->enable_dma(host)) {
2839 pr_warning("%s: No suitable DMA "
2840 "available. Falling back to PIO.\n",
2841 mmc_hostname(mmc));
2842 host->flags &=
2843 ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
2844 }
2845 }
2846 }
2847
2848 if (host->flags & SDHCI_USE_ADMA) {
2849 /*
2850 * We need to allocate descriptors for all sg entries
2851 * (128) and potentially one alignment transfer for
2852 * each of those entries.
2853 */
2854 host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL);
2855 host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
2856 if (!host->adma_desc || !host->align_buffer) {
2857 kfree(host->adma_desc);
2858 kfree(host->align_buffer);
2859 pr_warning("%s: Unable to allocate ADMA "
2860 "buffers. Falling back to standard DMA.\n",
2861 mmc_hostname(mmc));
2862 host->flags &= ~SDHCI_USE_ADMA;
2863 }
2864 }
2865
2866 /*
2867 * If we use DMA, then it's up to the caller to set the DMA
2868 * mask, but PIO does not need the hw shim so we set a new
2869 * mask here in that case.
2870 */
2871 if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
2872 host->dma_mask = DMA_BIT_MASK(64);
2873 mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
2874 }
2875
2876 if (host->version >= SDHCI_SPEC_300)
2877 host->max_clk = (caps[0] & SDHCI_CLOCK_V3_BASE_MASK)
2878 >> SDHCI_CLOCK_BASE_SHIFT;
2879 else
2880 host->max_clk = (caps[0] & SDHCI_CLOCK_BASE_MASK)
2881 >> SDHCI_CLOCK_BASE_SHIFT;
2882
2883 host->max_clk *= 1000000;
2884 if (host->max_clk == 0 || host->quirks &
2885 SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
2886 if (!host->ops->get_max_clock) {
2887 pr_err("%s: Hardware doesn't specify base clock "
2888 "frequency.\n", mmc_hostname(mmc));
2889 return -ENODEV;
2890 }
2891 host->max_clk = host->ops->get_max_clock(host);
2892 }
2893
2894 /*
2895 * In case of Host Controller v3.00, find out whether clock
2896 * multiplier is supported.
2897 */
2898 host->clk_mul = (caps[1] & SDHCI_CLOCK_MUL_MASK) >>
2899 SDHCI_CLOCK_MUL_SHIFT;
2900
2901 /*
2902 * In case the value in Clock Multiplier is 0, then programmable
2903 * clock mode is not supported, otherwise the actual clock
2904 * multiplier is one more than the value of Clock Multiplier
2905 * in the Capabilities Register.
2906 */
2907 if (host->clk_mul)
2908 host->clk_mul += 1;
2909
2910 /*
2911 * Set host parameters.
2912 */
2913 mmc->ops = &sdhci_ops;
2914 mmc->f_max = host->max_clk;
2915 if (host->ops->get_min_clock)
2916 mmc->f_min = host->ops->get_min_clock(host);
2917 else if (host->version >= SDHCI_SPEC_300) {
2918 if (host->clk_mul) {
2919 mmc->f_min = (host->max_clk * host->clk_mul) / 1024;
2920 mmc->f_max = host->max_clk * host->clk_mul;
2921 } else
2922 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
2923 } else
2924 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
2925
2926 host->timeout_clk =
2927 (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
2928 if (host->timeout_clk == 0) {
2929 if (host->ops->get_timeout_clock) {
2930 host->timeout_clk = host->ops->get_timeout_clock(host);
2931 } else if (!(host->quirks &
2932 SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
2933 pr_err("%s: Hardware doesn't specify timeout clock "
2934 "frequency.\n", mmc_hostname(mmc));
2935 return -ENODEV;
2936 }
2937 }
2938 if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
2939 host->timeout_clk *= 1000;
2940
2941 if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
2942 host->timeout_clk = mmc->f_max / 1000;
2943
2944 mmc->max_discard_to = (1 << 27) / host->timeout_clk;
2945
2946 mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
2947
2948 if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
2949 host->flags |= SDHCI_AUTO_CMD12;
2950
2951 /* Auto-CMD23 stuff only works in ADMA or PIO. */
2952 if ((host->version >= SDHCI_SPEC_300) &&
2953 ((host->flags & SDHCI_USE_ADMA) ||
2954 !(host->flags & SDHCI_USE_SDMA))) {
2955 host->flags |= SDHCI_AUTO_CMD23;
2956 DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc));
2957 } else {
2958 DBG("%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc));
2959 }
2960
2961 /*
2962 * A controller may support 8-bit width, but the board itself
2963 * might not have the pins brought out. Boards that support
2964 * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
2965 * their platform code before calling sdhci_add_host(), and we
2966 * won't assume 8-bit width for hosts without that CAP.
2967 */
2968 if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
2969 mmc->caps |= MMC_CAP_4_BIT_DATA;
2970
2971 if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23)
2972 mmc->caps &= ~MMC_CAP_CMD23;
2973
2974 if (caps[0] & SDHCI_CAN_DO_HISPD)
2975 mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
2976
2977 if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) &&
2978 !(host->mmc->caps & MMC_CAP_NONREMOVABLE))
2979 mmc->caps |= MMC_CAP_NEEDS_POLL;
2980
2981 /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
2982 host->vqmmc = regulator_get_optional(mmc_dev(mmc), "vqmmc");
2983 if (IS_ERR_OR_NULL(host->vqmmc)) {
2984 if (PTR_ERR(host->vqmmc) < 0) {
2985 pr_info("%s: no vqmmc regulator found\n",
2986 mmc_hostname(mmc));
2987 host->vqmmc = NULL;
2988 }
2989 } else {
2990 ret = regulator_enable(host->vqmmc);
2991 if (!regulator_is_supported_voltage(host->vqmmc, 1700000,
2992 1950000))
2993 caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
2994 SDHCI_SUPPORT_SDR50 |
2995 SDHCI_SUPPORT_DDR50);
2996 if (ret) {
2997 pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
2998 mmc_hostname(mmc), ret);
2999 host->vqmmc = NULL;
3000 }
3001 }
3002
3003 if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V)
3004 caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
3005 SDHCI_SUPPORT_DDR50);
3006
3007 /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */
3008 if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
3009 SDHCI_SUPPORT_DDR50))
3010 mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
3011
3012 /* SDR104 supports also implies SDR50 support */
3013 if (caps[1] & SDHCI_SUPPORT_SDR104) {
3014 mmc->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50;
3015 /* SD3.0: SDR104 is supported so (for eMMC) the caps2
3016 * field can be promoted to support HS200.
3017 */
3018 if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
3019 mmc->caps2 |= MMC_CAP2_HS200;
3020 } else if (caps[1] & SDHCI_SUPPORT_SDR50)
3021 mmc->caps |= MMC_CAP_UHS_SDR50;
3022
3023 if (caps[1] & SDHCI_SUPPORT_DDR50)
3024 mmc->caps |= MMC_CAP_UHS_DDR50;
3025
3026 /* Does the host need tuning for SDR50? */
3027 if (caps[1] & SDHCI_USE_SDR50_TUNING)
3028 host->flags |= SDHCI_SDR50_NEEDS_TUNING;
3029
3030 /* Does the host need tuning for SDR104 / HS200? */
3031 if (mmc->caps2 & MMC_CAP2_HS200)
3032 host->flags |= SDHCI_SDR104_NEEDS_TUNING;
3033
3034 /* Driver Type(s) (A, C, D) supported by the host */
3035 if (caps[1] & SDHCI_DRIVER_TYPE_A)
3036 mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
3037 if (caps[1] & SDHCI_DRIVER_TYPE_C)
3038 mmc->caps |= MMC_CAP_DRIVER_TYPE_C;
3039 if (caps[1] & SDHCI_DRIVER_TYPE_D)
3040 mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
3041
3042 /* Initial value for re-tuning timer count */
3043 host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
3044 SDHCI_RETUNING_TIMER_COUNT_SHIFT;
3045
3046 /*
3047 * In case Re-tuning Timer is not disabled, the actual value of
3048 * re-tuning timer will be 2 ^ (n - 1).
3049 */
3050 if (host->tuning_count)
3051 host->tuning_count = 1 << (host->tuning_count - 1);
3052
3053 /* Re-tuning mode supported by the Host Controller */
3054 host->tuning_mode = (caps[1] & SDHCI_RETUNING_MODE_MASK) >>
3055 SDHCI_RETUNING_MODE_SHIFT;
3056
3057 ocr_avail = 0;
3058
3059 host->vmmc = regulator_get_optional(mmc_dev(mmc), "vmmc");
3060 if (IS_ERR_OR_NULL(host->vmmc)) {
3061 if (PTR_ERR(host->vmmc) < 0) {
3062 pr_info("%s: no vmmc regulator found\n",
3063 mmc_hostname(mmc));
3064 host->vmmc = NULL;
3065 }
3066 }
3067
3068 #ifdef CONFIG_REGULATOR
3069 /*
3070 * Voltage range check makes sense only if regulator reports
3071 * any voltage value.
3072 */
3073 if (host->vmmc && regulator_get_voltage(host->vmmc) > 0) {
3074 ret = regulator_is_supported_voltage(host->vmmc, 2700000,
3075 3600000);
3076 if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
3077 caps[0] &= ~SDHCI_CAN_VDD_330;
3078 if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
3079 caps[0] &= ~SDHCI_CAN_VDD_300;
3080 ret = regulator_is_supported_voltage(host->vmmc, 1700000,
3081 1950000);
3082 if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
3083 caps[0] &= ~SDHCI_CAN_VDD_180;
3084 }
3085 #endif /* CONFIG_REGULATOR */
3086
3087 /*
3088 * According to SD Host Controller spec v3.00, if the Host System
3089 * can afford more than 150mA, Host Driver should set XPC to 1. Also
3090 * the value is meaningful only if Voltage Support in the Capabilities
3091 * register is set. The actual current value is 4 times the register
3092 * value.
3093 */
3094 max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
3095 if (!max_current_caps && host->vmmc) {
3096 u32 curr = regulator_get_current_limit(host->vmmc);
3097 if (curr > 0) {
3098
3099 /* convert to SDHCI_MAX_CURRENT format */
3100 curr = curr/1000; /* convert to mA */
3101 curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER;
3102
3103 curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT);
3104 max_current_caps =
3105 (curr << SDHCI_MAX_CURRENT_330_SHIFT) |
3106 (curr << SDHCI_MAX_CURRENT_300_SHIFT) |
3107 (curr << SDHCI_MAX_CURRENT_180_SHIFT);
3108 }
3109 }
3110
3111 if (caps[0] & SDHCI_CAN_VDD_330) {
3112 ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
3113
3114 mmc->max_current_330 = ((max_current_caps &
3115 SDHCI_MAX_CURRENT_330_MASK) >>
3116 SDHCI_MAX_CURRENT_330_SHIFT) *
3117 SDHCI_MAX_CURRENT_MULTIPLIER;
3118 }
3119 if (caps[0] & SDHCI_CAN_VDD_300) {
3120 ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31;
3121
3122 mmc->max_current_300 = ((max_current_caps &
3123 SDHCI_MAX_CURRENT_300_MASK) >>
3124 SDHCI_MAX_CURRENT_300_SHIFT) *
3125 SDHCI_MAX_CURRENT_MULTIPLIER;
3126 }
3127 if (caps[0] & SDHCI_CAN_VDD_180) {
3128 ocr_avail |= MMC_VDD_165_195;
3129
3130 mmc->max_current_180 = ((max_current_caps &
3131 SDHCI_MAX_CURRENT_180_MASK) >>
3132 SDHCI_MAX_CURRENT_180_SHIFT) *
3133 SDHCI_MAX_CURRENT_MULTIPLIER;
3134 }
3135
3136 if (host->ocr_mask)
3137 ocr_avail = host->ocr_mask;
3138
3139 mmc->ocr_avail = ocr_avail;
3140 mmc->ocr_avail_sdio = ocr_avail;
3141 if (host->ocr_avail_sdio)
3142 mmc->ocr_avail_sdio &= host->ocr_avail_sdio;
3143 mmc->ocr_avail_sd = ocr_avail;
3144 if (host->ocr_avail_sd)
3145 mmc->ocr_avail_sd &= host->ocr_avail_sd;
3146 else /* normal SD controllers don't support 1.8V */
3147 mmc->ocr_avail_sd &= ~MMC_VDD_165_195;
3148 mmc->ocr_avail_mmc = ocr_avail;
3149 if (host->ocr_avail_mmc)
3150 mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
3151
3152 if (mmc->ocr_avail == 0) {
3153 pr_err("%s: Hardware doesn't report any "
3154 "support voltages.\n", mmc_hostname(mmc));
3155 return -ENODEV;
3156 }
3157
3158 spin_lock_init(&host->lock);
3159
3160 /*
3161 * Maximum number of segments. Depends on if the hardware
3162 * can do scatter/gather or not.
3163 */
3164 if (host->flags & SDHCI_USE_ADMA)
3165 mmc->max_segs = 128;
3166 else if (host->flags & SDHCI_USE_SDMA)
3167 mmc->max_segs = 1;
3168 else /* PIO */
3169 mmc->max_segs = 128;
3170
3171 /*
3172 * Maximum number of sectors in one transfer. Limited by DMA boundary
3173 * size (512KiB).
3174 */
3175 mmc->max_req_size = 524288;
3176
3177 /*
3178 * Maximum segment size. Could be one segment with the maximum number
3179 * of bytes. When doing hardware scatter/gather, each entry cannot
3180 * be larger than 64 KiB though.
3181 */
3182 if (host->flags & SDHCI_USE_ADMA) {
3183 if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC)
3184 mmc->max_seg_size = 65535;
3185 else
3186 mmc->max_seg_size = 65536;
3187 } else {
3188 mmc->max_seg_size = mmc->max_req_size;
3189 }
3190
3191 /*
3192 * Maximum block size. This varies from controller to controller and
3193 * is specified in the capabilities register.
3194 */
3195 if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) {
3196 mmc->max_blk_size = 2;
3197 } else {
3198 mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
3199 SDHCI_MAX_BLOCK_SHIFT;
3200 if (mmc->max_blk_size >= 3) {
3201 pr_warning("%s: Invalid maximum block size, "
3202 "assuming 512 bytes\n", mmc_hostname(mmc));
3203 mmc->max_blk_size = 0;
3204 }
3205 }
3206
3207 mmc->max_blk_size = 512 << mmc->max_blk_size;
3208
3209 /*
3210 * Maximum block count.
3211 */
3212 mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
3213
3214 /*
3215 * Init tasklets.
3216 */
3217 tasklet_init(&host->card_tasklet,
3218 sdhci_tasklet_card, (unsigned long)host);
3219 tasklet_init(&host->finish_tasklet,
3220 sdhci_tasklet_finish, (unsigned long)host);
3221
3222 setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
3223
3224 if (host->version >= SDHCI_SPEC_300) {
3225 init_waitqueue_head(&host->buf_ready_int);
3226
3227 /* Initialize re-tuning timer */
3228 init_timer(&host->tuning_timer);
3229 host->tuning_timer.data = (unsigned long)host;
3230 host->tuning_timer.function = sdhci_tuning_timer;
3231 }
3232
3233 sdhci_init(host, 0);
3234
3235 ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
3236 mmc_hostname(mmc), host);
3237 if (ret) {
3238 pr_err("%s: Failed to request IRQ %d: %d\n",
3239 mmc_hostname(mmc), host->irq, ret);
3240 goto untasklet;
3241 }
3242
3243 #ifdef CONFIG_MMC_DEBUG
3244 sdhci_dumpregs(host);
3245 #endif
3246
3247 #ifdef SDHCI_USE_LEDS_CLASS
3248 snprintf(host->led_name, sizeof(host->led_name),
3249 "%s::", mmc_hostname(mmc));
3250 host->led.name = host->led_name;
3251 host->led.brightness = LED_OFF;
3252 host->led.default_trigger = mmc_hostname(mmc);
3253 host->led.brightness_set = sdhci_led_control;
3254
3255 ret = led_classdev_register(mmc_dev(mmc), &host->led);
3256 if (ret) {
3257 pr_err("%s: Failed to register LED device: %d\n",
3258 mmc_hostname(mmc), ret);
3259 goto reset;
3260 }
3261 #endif
3262
3263 mmiowb();
3264
3265 mmc_add_host(mmc);
3266
3267 pr_info("%s: SDHCI controller on %s [%s] using %s\n",
3268 mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
3269 (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
3270 (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
3271
3272 sdhci_enable_card_detection(host);
3273
3274 return 0;
3275
3276 #ifdef SDHCI_USE_LEDS_CLASS
3277 reset:
3278 sdhci_reset(host, SDHCI_RESET_ALL);
3279 sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
3280 free_irq(host->irq, host);
3281 #endif
3282 untasklet:
3283 tasklet_kill(&host->card_tasklet);
3284 tasklet_kill(&host->finish_tasklet);
3285
3286 return ret;
3287 }
3288
3289 EXPORT_SYMBOL_GPL(sdhci_add_host);
3290
3291 void sdhci_remove_host(struct sdhci_host *host, int dead)
3292 {
3293 unsigned long flags;
3294
3295 if (dead) {
3296 spin_lock_irqsave(&host->lock, flags);
3297
3298 host->flags |= SDHCI_DEVICE_DEAD;
3299
3300 if (host->mrq) {
3301 pr_err("%s: Controller removed during "
3302 " transfer!\n", mmc_hostname(host->mmc));
3303
3304 host->mrq->cmd->error = -ENOMEDIUM;
3305 tasklet_schedule(&host->finish_tasklet);
3306 }
3307
3308 spin_unlock_irqrestore(&host->lock, flags);
3309 }
3310
3311 sdhci_disable_card_detection(host);
3312
3313 mmc_remove_host(host->mmc);
3314
3315 #ifdef SDHCI_USE_LEDS_CLASS
3316 led_classdev_unregister(&host->led);
3317 #endif
3318
3319 if (!dead)
3320 sdhci_reset(host, SDHCI_RESET_ALL);
3321
3322 sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
3323 free_irq(host->irq, host);
3324
3325 del_timer_sync(&host->timer);
3326
3327 tasklet_kill(&host->card_tasklet);
3328 tasklet_kill(&host->finish_tasklet);
3329
3330 if (host->vmmc) {
3331 regulator_disable(host->vmmc);
3332 regulator_put(host->vmmc);
3333 }
3334
3335 if (host->vqmmc) {
3336 regulator_disable(host->vqmmc);
3337 regulator_put(host->vqmmc);
3338 }
3339
3340 kfree(host->adma_desc);
3341 kfree(host->align_buffer);
3342
3343 host->adma_desc = NULL;
3344 host->align_buffer = NULL;
3345 }
3346
3347 EXPORT_SYMBOL_GPL(sdhci_remove_host);
3348
3349 void sdhci_free_host(struct sdhci_host *host)
3350 {
3351 mmc_free_host(host->mmc);
3352 }
3353
3354 EXPORT_SYMBOL_GPL(sdhci_free_host);
3355
3356 /*****************************************************************************\
3357 * *
3358 * Driver init/exit *
3359 * *
3360 \*****************************************************************************/
3361
3362 static int __init sdhci_drv_init(void)
3363 {
3364 pr_info(DRIVER_NAME
3365 ": Secure Digital Host Controller Interface driver\n");
3366 pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
3367
3368 return 0;
3369 }
3370
3371 static void __exit sdhci_drv_exit(void)
3372 {
3373 }
3374
3375 module_init(sdhci_drv_init);
3376 module_exit(sdhci_drv_exit);
3377
3378 module_param(debug_quirks, uint, 0444);
3379 module_param(debug_quirks2, uint, 0444);
3380
3381 MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
3382 MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
3383 MODULE_LICENSE("GPL");
3384
3385 MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
3386 MODULE_PARM_DESC(debug_quirks2, "Force certain other quirks.");
Linux with added FPC-III support