PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / rapidio / switches / idt_gen2.c
blob9f7fe21580bbcc01a08ed1b9665c9ffb1a6c40f3
1 /*
2 * IDT CPS Gen.2 Serial RapidIO switch family support
4 * Copyright 2010 Integrated Device Technology, Inc.
5 * Alexandre Bounine <alexandre.bounine@idt.com>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
13 #include <linux/stat.h>
14 #include <linux/module.h>
15 #include <linux/rio.h>
16 #include <linux/rio_drv.h>
17 #include <linux/rio_ids.h>
18 #include <linux/delay.h>
20 #include <asm/page.h>
21 #include "../rio.h"
23 #define LOCAL_RTE_CONF_DESTID_SEL 0x010070
24 #define LOCAL_RTE_CONF_DESTID_SEL_PSEL 0x0000001f
26 #define IDT_LT_ERR_REPORT_EN 0x03100c
28 #define IDT_PORT_ERR_REPORT_EN(n) (0x031044 + (n)*0x40)
29 #define IDT_PORT_ERR_REPORT_EN_BC 0x03ff04
31 #define IDT_PORT_ISERR_REPORT_EN(n) (0x03104C + (n)*0x40)
32 #define IDT_PORT_ISERR_REPORT_EN_BC 0x03ff0c
33 #define IDT_PORT_INIT_TX_ACQUIRED 0x00000020
35 #define IDT_LANE_ERR_REPORT_EN(n) (0x038010 + (n)*0x100)
36 #define IDT_LANE_ERR_REPORT_EN_BC 0x03ff10
38 #define IDT_DEV_CTRL_1 0xf2000c
39 #define IDT_DEV_CTRL_1_GENPW 0x02000000
40 #define IDT_DEV_CTRL_1_PRSTBEH 0x00000001
42 #define IDT_CFGBLK_ERR_CAPTURE_EN 0x020008
43 #define IDT_CFGBLK_ERR_REPORT 0xf20014
44 #define IDT_CFGBLK_ERR_REPORT_GENPW 0x00000002
46 #define IDT_AUX_PORT_ERR_CAP_EN 0x020000
47 #define IDT_AUX_ERR_REPORT_EN 0xf20018
48 #define IDT_AUX_PORT_ERR_LOG_I2C 0x00000002
49 #define IDT_AUX_PORT_ERR_LOG_JTAG 0x00000001
51 #define IDT_ISLTL_ADDRESS_CAP 0x021014
53 #define IDT_RIO_DOMAIN 0xf20020
54 #define IDT_RIO_DOMAIN_MASK 0x000000ff
56 #define IDT_PW_INFO_CSR 0xf20024
58 #define IDT_SOFT_RESET 0xf20040
59 #define IDT_SOFT_RESET_REQ 0x00030097
61 #define IDT_I2C_MCTRL 0xf20050
62 #define IDT_I2C_MCTRL_GENPW 0x04000000
64 #define IDT_JTAG_CTRL 0xf2005c
65 #define IDT_JTAG_CTRL_GENPW 0x00000002
67 #define IDT_LANE_CTRL(n) (0xff8000 + (n)*0x100)
68 #define IDT_LANE_CTRL_BC 0xffff00
69 #define IDT_LANE_CTRL_GENPW 0x00200000
70 #define IDT_LANE_DFE_1_BC 0xffff18
71 #define IDT_LANE_DFE_2_BC 0xffff1c
73 #define IDT_PORT_OPS(n) (0xf40004 + (n)*0x100)
74 #define IDT_PORT_OPS_GENPW 0x08000000
75 #define IDT_PORT_OPS_PL_ELOG 0x00000040
76 #define IDT_PORT_OPS_LL_ELOG 0x00000020
77 #define IDT_PORT_OPS_LT_ELOG 0x00000010
78 #define IDT_PORT_OPS_BC 0xf4ff04
80 #define IDT_PORT_ISERR_DET(n) (0xf40008 + (n)*0x100)
82 #define IDT_ERR_CAP 0xfd0000
83 #define IDT_ERR_CAP_LOG_OVERWR 0x00000004
85 #define IDT_ERR_RD 0xfd0004
87 #define IDT_DEFAULT_ROUTE 0xde
88 #define IDT_NO_ROUTE 0xdf
90 static int
91 idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
92 u16 table, u16 route_destid, u8 route_port)
95 * Select routing table to update
97 if (table == RIO_GLOBAL_TABLE)
98 table = 0;
99 else
100 table++;
102 if (route_port == RIO_INVALID_ROUTE)
103 route_port = IDT_DEFAULT_ROUTE;
105 rio_mport_write_config_32(mport, destid, hopcount,
106 LOCAL_RTE_CONF_DESTID_SEL, table);
109 * Program destination port for the specified destID
111 rio_mport_write_config_32(mport, destid, hopcount,
112 RIO_STD_RTE_CONF_DESTID_SEL_CSR,
113 (u32)route_destid);
115 rio_mport_write_config_32(mport, destid, hopcount,
116 RIO_STD_RTE_CONF_PORT_SEL_CSR,
117 (u32)route_port);
118 udelay(10);
120 return 0;
123 static int
124 idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
125 u16 table, u16 route_destid, u8 *route_port)
127 u32 result;
130 * Select routing table to read
132 if (table == RIO_GLOBAL_TABLE)
133 table = 0;
134 else
135 table++;
137 rio_mport_write_config_32(mport, destid, hopcount,
138 LOCAL_RTE_CONF_DESTID_SEL, table);
140 rio_mport_write_config_32(mport, destid, hopcount,
141 RIO_STD_RTE_CONF_DESTID_SEL_CSR,
142 route_destid);
144 rio_mport_read_config_32(mport, destid, hopcount,
145 RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
147 if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result)
148 *route_port = RIO_INVALID_ROUTE;
149 else
150 *route_port = (u8)result;
152 return 0;
155 static int
156 idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
157 u16 table)
159 u32 i;
162 * Select routing table to read
164 if (table == RIO_GLOBAL_TABLE)
165 table = 0;
166 else
167 table++;
169 rio_mport_write_config_32(mport, destid, hopcount,
170 LOCAL_RTE_CONF_DESTID_SEL, table);
172 for (i = RIO_STD_RTE_CONF_EXTCFGEN;
173 i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) {
174 rio_mport_write_config_32(mport, destid, hopcount,
175 RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
176 rio_mport_write_config_32(mport, destid, hopcount,
177 RIO_STD_RTE_CONF_PORT_SEL_CSR,
178 (IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) |
179 (IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE);
180 i += 4;
183 return 0;
187 static int
188 idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
189 u8 sw_domain)
192 * Switch domain configuration operates only at global level
194 rio_mport_write_config_32(mport, destid, hopcount,
195 IDT_RIO_DOMAIN, (u32)sw_domain);
196 return 0;
199 static int
200 idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
201 u8 *sw_domain)
203 u32 regval;
206 * Switch domain configuration operates only at global level
208 rio_mport_read_config_32(mport, destid, hopcount,
209 IDT_RIO_DOMAIN, &regval);
211 *sw_domain = (u8)(regval & 0xff);
213 return 0;
216 static int
217 idtg2_em_init(struct rio_dev *rdev)
219 u32 regval;
220 int i, tmp;
223 * This routine performs device-specific initialization only.
224 * All standard EM configuration should be performed at upper level.
227 pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
229 /* Set Port-Write info CSR: PRIO=3 and CRF=1 */
230 rio_write_config_32(rdev, IDT_PW_INFO_CSR, 0x0000e000);
233 * Configure LT LAYER error reporting.
236 /* Enable standard (RIO.p8) error reporting */
237 rio_write_config_32(rdev, IDT_LT_ERR_REPORT_EN,
238 REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR |
239 REM_LTL_ERR_UNSUPTR);
241 /* Use Port-Writes for LT layer error reporting.
242 * Enable per-port reset
244 rio_read_config_32(rdev, IDT_DEV_CTRL_1, &regval);
245 rio_write_config_32(rdev, IDT_DEV_CTRL_1,
246 regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH);
249 * Configure PORT error reporting.
252 /* Report all RIO.p8 errors supported by device */
253 rio_write_config_32(rdev, IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037);
255 /* Configure reporting of implementation specific errors/events */
256 rio_write_config_32(rdev, IDT_PORT_ISERR_REPORT_EN_BC,
257 IDT_PORT_INIT_TX_ACQUIRED);
259 /* Use Port-Writes for port error reporting and enable error logging */
260 tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo);
261 for (i = 0; i < tmp; i++) {
262 rio_read_config_32(rdev, IDT_PORT_OPS(i), &regval);
263 rio_write_config_32(rdev,
264 IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW |
265 IDT_PORT_OPS_PL_ELOG |
266 IDT_PORT_OPS_LL_ELOG |
267 IDT_PORT_OPS_LT_ELOG);
269 /* Overwrite error log if full */
270 rio_write_config_32(rdev, IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR);
273 * Configure LANE error reporting.
276 /* Disable line error reporting */
277 rio_write_config_32(rdev, IDT_LANE_ERR_REPORT_EN_BC, 0);
279 /* Use Port-Writes for lane error reporting (when enabled)
280 * (do per-lane update because lanes may have different configuration)
282 tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16;
283 for (i = 0; i < tmp; i++) {
284 rio_read_config_32(rdev, IDT_LANE_CTRL(i), &regval);
285 rio_write_config_32(rdev, IDT_LANE_CTRL(i),
286 regval | IDT_LANE_CTRL_GENPW);
290 * Configure AUX error reporting.
293 /* Disable JTAG and I2C Error capture */
294 rio_write_config_32(rdev, IDT_AUX_PORT_ERR_CAP_EN, 0);
296 /* Disable JTAG and I2C Error reporting/logging */
297 rio_write_config_32(rdev, IDT_AUX_ERR_REPORT_EN, 0);
299 /* Disable Port-Write notification from JTAG */
300 rio_write_config_32(rdev, IDT_JTAG_CTRL, 0);
302 /* Disable Port-Write notification from I2C */
303 rio_read_config_32(rdev, IDT_I2C_MCTRL, &regval);
304 rio_write_config_32(rdev, IDT_I2C_MCTRL, regval & ~IDT_I2C_MCTRL_GENPW);
307 * Configure CFG_BLK error reporting.
310 /* Disable Configuration Block error capture */
311 rio_write_config_32(rdev, IDT_CFGBLK_ERR_CAPTURE_EN, 0);
313 /* Disable Port-Writes for Configuration Block error reporting */
314 rio_read_config_32(rdev, IDT_CFGBLK_ERR_REPORT, &regval);
315 rio_write_config_32(rdev, IDT_CFGBLK_ERR_REPORT,
316 regval & ~IDT_CFGBLK_ERR_REPORT_GENPW);
318 /* set TVAL = ~50us */
319 rio_write_config_32(rdev,
320 rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
322 return 0;
325 static int
326 idtg2_em_handler(struct rio_dev *rdev, u8 portnum)
328 u32 regval, em_perrdet, em_ltlerrdet;
330 rio_read_config_32(rdev,
331 rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
332 if (em_ltlerrdet) {
333 /* Service Logical/Transport Layer Error(s) */
334 if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) {
335 /* Implementation specific error reported */
336 rio_read_config_32(rdev,
337 IDT_ISLTL_ADDRESS_CAP, &regval);
339 pr_debug("RIO: %s Implementation Specific LTL errors" \
340 " 0x%x @(0x%x)\n",
341 rio_name(rdev), em_ltlerrdet, regval);
343 /* Clear implementation specific address capture CSR */
344 rio_write_config_32(rdev, IDT_ISLTL_ADDRESS_CAP, 0);
349 rio_read_config_32(rdev,
350 rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
351 if (em_perrdet) {
352 /* Service Port-Level Error(s) */
353 if (em_perrdet & REM_PED_IMPL_SPEC) {
354 /* Implementation Specific port error reported */
356 /* Get IS errors reported */
357 rio_read_config_32(rdev,
358 IDT_PORT_ISERR_DET(portnum), &regval);
360 pr_debug("RIO: %s Implementation Specific Port" \
361 " errors 0x%x\n", rio_name(rdev), regval);
363 /* Clear all implementation specific events */
364 rio_write_config_32(rdev,
365 IDT_PORT_ISERR_DET(portnum), 0);
369 return 0;
372 static ssize_t
373 idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf)
375 struct rio_dev *rdev = to_rio_dev(dev);
376 ssize_t len = 0;
377 u32 regval;
379 while (!rio_read_config_32(rdev, IDT_ERR_RD, &regval)) {
380 if (!regval) /* 0 = end of log */
381 break;
382 len += snprintf(buf + len, PAGE_SIZE - len,
383 "%08x\n", regval);
384 if (len >= (PAGE_SIZE - 10))
385 break;
388 return len;
391 static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL);
393 static int idtg2_sysfs(struct rio_dev *rdev, bool create)
395 struct device *dev = &rdev->dev;
396 int err = 0;
398 if (create) {
399 /* Initialize sysfs entries */
400 err = device_create_file(dev, &dev_attr_errlog);
401 if (err)
402 dev_err(dev, "Unable create sysfs errlog file\n");
403 } else
404 device_remove_file(dev, &dev_attr_errlog);
406 return err;
409 static struct rio_switch_ops idtg2_switch_ops = {
410 .owner = THIS_MODULE,
411 .add_entry = idtg2_route_add_entry,
412 .get_entry = idtg2_route_get_entry,
413 .clr_table = idtg2_route_clr_table,
414 .set_domain = idtg2_set_domain,
415 .get_domain = idtg2_get_domain,
416 .em_init = idtg2_em_init,
417 .em_handle = idtg2_em_handler,
420 static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id)
422 pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
424 spin_lock(&rdev->rswitch->lock);
426 if (rdev->rswitch->ops) {
427 spin_unlock(&rdev->rswitch->lock);
428 return -EINVAL;
431 rdev->rswitch->ops = &idtg2_switch_ops;
433 if (rdev->do_enum) {
434 /* Ensure that default routing is disabled on startup */
435 rio_write_config_32(rdev,
436 RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE);
439 /* Create device-specific sysfs attributes */
440 idtg2_sysfs(rdev, true);
442 spin_unlock(&rdev->rswitch->lock);
443 return 0;
446 static void idtg2_remove(struct rio_dev *rdev)
448 pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
449 spin_lock(&rdev->rswitch->lock);
450 if (rdev->rswitch->ops != &idtg2_switch_ops) {
451 spin_unlock(&rdev->rswitch->lock);
452 return;
454 rdev->rswitch->ops = NULL;
456 /* Remove device-specific sysfs attributes */
457 idtg2_sysfs(rdev, false);
459 spin_unlock(&rdev->rswitch->lock);
462 static struct rio_device_id idtg2_id_table[] = {
463 {RIO_DEVICE(RIO_DID_IDTCPS1848, RIO_VID_IDT)},
464 {RIO_DEVICE(RIO_DID_IDTCPS1616, RIO_VID_IDT)},
465 {RIO_DEVICE(RIO_DID_IDTVPS1616, RIO_VID_IDT)},
466 {RIO_DEVICE(RIO_DID_IDTSPS1616, RIO_VID_IDT)},
467 {RIO_DEVICE(RIO_DID_IDTCPS1432, RIO_VID_IDT)},
468 { 0, } /* terminate list */
471 static struct rio_driver idtg2_driver = {
472 .name = "idt_gen2",
473 .id_table = idtg2_id_table,
474 .probe = idtg2_probe,
475 .remove = idtg2_remove,
478 static int __init idtg2_init(void)
480 return rio_register_driver(&idtg2_driver);
483 static void __exit idtg2_exit(void)
485 pr_debug("RIO: %s\n", __func__);
486 rio_unregister_driver(&idtg2_driver);
487 pr_debug("RIO: %s done\n", __func__);
490 device_initcall(idtg2_init);
491 module_exit(idtg2_exit);
493 MODULE_DESCRIPTION("IDT CPS Gen.2 Serial RapidIO switch family driver");
494 MODULE_AUTHOR("Integrated Device Technology, Inc.");
495 MODULE_LICENSE("GPL");