PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / regulator / max8649.c
blob7f049c92ee52406bbbc7bd3e08573bdd89f25159
1 /*
2 * Regulators driver for Maxim max8649
4 * Copyright (C) 2009-2010 Marvell International Ltd.
5 * Haojian Zhuang <haojian.zhuang@marvell.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/err.h>
14 #include <linux/i2c.h>
15 #include <linux/platform_device.h>
16 #include <linux/regulator/driver.h>
17 #include <linux/slab.h>
18 #include <linux/regulator/max8649.h>
19 #include <linux/regmap.h>
21 #define MAX8649_DCDC_VMIN 750000 /* uV */
22 #define MAX8649_DCDC_VMAX 1380000 /* uV */
23 #define MAX8649_DCDC_STEP 10000 /* uV */
24 #define MAX8649_VOL_MASK 0x3f
26 /* Registers */
27 #define MAX8649_MODE0 0x00
28 #define MAX8649_MODE1 0x01
29 #define MAX8649_MODE2 0x02
30 #define MAX8649_MODE3 0x03
31 #define MAX8649_CONTROL 0x04
32 #define MAX8649_SYNC 0x05
33 #define MAX8649_RAMP 0x06
34 #define MAX8649_CHIP_ID1 0x08
35 #define MAX8649_CHIP_ID2 0x09
37 /* Bits */
38 #define MAX8649_EN_PD (1 << 7)
39 #define MAX8649_VID0_PD (1 << 6)
40 #define MAX8649_VID1_PD (1 << 5)
41 #define MAX8649_VID_MASK (3 << 5)
43 #define MAX8649_FORCE_PWM (1 << 7)
44 #define MAX8649_SYNC_EXTCLK (1 << 6)
46 #define MAX8649_EXT_MASK (3 << 6)
48 #define MAX8649_RAMP_MASK (7 << 5)
49 #define MAX8649_RAMP_DOWN (1 << 1)
51 struct max8649_regulator_info {
52 struct regulator_dev *regulator;
53 struct device *dev;
54 struct regmap *regmap;
56 unsigned mode:2; /* bit[1:0] = VID1, VID0 */
57 unsigned extclk_freq:2;
58 unsigned extclk:1;
59 unsigned ramp_timing:3;
60 unsigned ramp_down:1;
63 static int max8649_enable_time(struct regulator_dev *rdev)
65 struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
66 int voltage, rate, ret;
67 unsigned int val;
69 /* get voltage */
70 ret = regmap_read(info->regmap, rdev->desc->vsel_reg, &val);
71 if (ret != 0)
72 return ret;
73 val &= MAX8649_VOL_MASK;
74 voltage = regulator_list_voltage_linear(rdev, (unsigned char)val);
76 /* get rate */
77 ret = regmap_read(info->regmap, MAX8649_RAMP, &val);
78 if (ret != 0)
79 return ret;
80 ret = (val & MAX8649_RAMP_MASK) >> 5;
81 rate = (32 * 1000) >> ret; /* uV/uS */
83 return DIV_ROUND_UP(voltage, rate);
86 static int max8649_set_mode(struct regulator_dev *rdev, unsigned int mode)
88 struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
90 switch (mode) {
91 case REGULATOR_MODE_FAST:
92 regmap_update_bits(info->regmap, rdev->desc->vsel_reg,
93 MAX8649_FORCE_PWM, MAX8649_FORCE_PWM);
94 break;
95 case REGULATOR_MODE_NORMAL:
96 regmap_update_bits(info->regmap, rdev->desc->vsel_reg,
97 MAX8649_FORCE_PWM, 0);
98 break;
99 default:
100 return -EINVAL;
102 return 0;
105 static unsigned int max8649_get_mode(struct regulator_dev *rdev)
107 struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
108 unsigned int val;
109 int ret;
111 ret = regmap_read(info->regmap, rdev->desc->vsel_reg, &val);
112 if (ret != 0)
113 return ret;
114 if (val & MAX8649_FORCE_PWM)
115 return REGULATOR_MODE_FAST;
116 return REGULATOR_MODE_NORMAL;
119 static struct regulator_ops max8649_dcdc_ops = {
120 .set_voltage_sel = regulator_set_voltage_sel_regmap,
121 .get_voltage_sel = regulator_get_voltage_sel_regmap,
122 .list_voltage = regulator_list_voltage_linear,
123 .map_voltage = regulator_map_voltage_linear,
124 .enable = regulator_enable_regmap,
125 .disable = regulator_disable_regmap,
126 .is_enabled = regulator_is_enabled_regmap,
127 .enable_time = max8649_enable_time,
128 .set_mode = max8649_set_mode,
129 .get_mode = max8649_get_mode,
133 static struct regulator_desc dcdc_desc = {
134 .name = "max8649",
135 .ops = &max8649_dcdc_ops,
136 .type = REGULATOR_VOLTAGE,
137 .n_voltages = 1 << 6,
138 .owner = THIS_MODULE,
139 .vsel_mask = MAX8649_VOL_MASK,
140 .min_uV = MAX8649_DCDC_VMIN,
141 .uV_step = MAX8649_DCDC_STEP,
142 .enable_reg = MAX8649_CONTROL,
143 .enable_mask = MAX8649_EN_PD,
144 .enable_is_inverted = true,
147 static struct regmap_config max8649_regmap_config = {
148 .reg_bits = 8,
149 .val_bits = 8,
152 static int max8649_regulator_probe(struct i2c_client *client,
153 const struct i2c_device_id *id)
155 struct max8649_platform_data *pdata = dev_get_platdata(&client->dev);
156 struct max8649_regulator_info *info = NULL;
157 struct regulator_config config = { };
158 unsigned int val;
159 unsigned char data;
160 int ret;
162 info = devm_kzalloc(&client->dev, sizeof(struct max8649_regulator_info),
163 GFP_KERNEL);
164 if (!info) {
165 dev_err(&client->dev, "No enough memory\n");
166 return -ENOMEM;
169 info->regmap = devm_regmap_init_i2c(client, &max8649_regmap_config);
170 if (IS_ERR(info->regmap)) {
171 ret = PTR_ERR(info->regmap);
172 dev_err(&client->dev, "Failed to allocate register map: %d\n", ret);
173 return ret;
176 info->dev = &client->dev;
177 i2c_set_clientdata(client, info);
179 info->mode = pdata->mode;
180 switch (info->mode) {
181 case 0:
182 dcdc_desc.vsel_reg = MAX8649_MODE0;
183 break;
184 case 1:
185 dcdc_desc.vsel_reg = MAX8649_MODE1;
186 break;
187 case 2:
188 dcdc_desc.vsel_reg = MAX8649_MODE2;
189 break;
190 case 3:
191 dcdc_desc.vsel_reg = MAX8649_MODE3;
192 break;
193 default:
194 break;
197 ret = regmap_read(info->regmap, MAX8649_CHIP_ID1, &val);
198 if (ret != 0) {
199 dev_err(info->dev, "Failed to detect ID of MAX8649:%d\n",
200 ret);
201 return ret;
203 dev_info(info->dev, "Detected MAX8649 (ID:%x)\n", val);
205 /* enable VID0 & VID1 */
206 regmap_update_bits(info->regmap, MAX8649_CONTROL, MAX8649_VID_MASK, 0);
208 /* enable/disable external clock synchronization */
209 info->extclk = pdata->extclk;
210 data = (info->extclk) ? MAX8649_SYNC_EXTCLK : 0;
211 regmap_update_bits(info->regmap, dcdc_desc.vsel_reg,
212 MAX8649_SYNC_EXTCLK, data);
213 if (info->extclk) {
214 /* set external clock frequency */
215 info->extclk_freq = pdata->extclk_freq;
216 regmap_update_bits(info->regmap, MAX8649_SYNC, MAX8649_EXT_MASK,
217 info->extclk_freq << 6);
220 if (pdata->ramp_timing) {
221 info->ramp_timing = pdata->ramp_timing;
222 regmap_update_bits(info->regmap, MAX8649_RAMP, MAX8649_RAMP_MASK,
223 info->ramp_timing << 5);
226 info->ramp_down = pdata->ramp_down;
227 if (info->ramp_down) {
228 regmap_update_bits(info->regmap, MAX8649_RAMP, MAX8649_RAMP_DOWN,
229 MAX8649_RAMP_DOWN);
232 config.dev = &client->dev;
233 config.init_data = pdata->regulator;
234 config.driver_data = info;
235 config.regmap = info->regmap;
237 info->regulator = devm_regulator_register(&client->dev, &dcdc_desc,
238 &config);
239 if (IS_ERR(info->regulator)) {
240 dev_err(info->dev, "failed to register regulator %s\n",
241 dcdc_desc.name);
242 return PTR_ERR(info->regulator);
245 return 0;
248 static const struct i2c_device_id max8649_id[] = {
249 { "max8649", 0 },
252 MODULE_DEVICE_TABLE(i2c, max8649_id);
254 static struct i2c_driver max8649_driver = {
255 .probe = max8649_regulator_probe,
256 .driver = {
257 .name = "max8649",
259 .id_table = max8649_id,
262 static int __init max8649_init(void)
264 return i2c_add_driver(&max8649_driver);
266 subsys_initcall(max8649_init);
268 static void __exit max8649_exit(void)
270 i2c_del_driver(&max8649_driver);
272 module_exit(max8649_exit);
274 /* Module information */
275 MODULE_DESCRIPTION("MAXIM 8649 voltage regulator driver");
276 MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
277 MODULE_LICENSE("GPL");