drivers/scsi/lpfc/lpfc_bsg.h

   1 /*******************************************************************
   2  * This file is part of the Emulex Linux Device Driver for         *
   3  * Fibre Channel Host Bus Adapters.                                *
   4  * Copyright (C) 2010-2012 Emulex.  All rights reserved.                *
   5  * EMULEX and SLI are trademarks of Emulex.                        *
   6  * www.emulex.com                                                  *
   7  *                                                                 *
   8  * This program is free software; you can redistribute it and/or   *
   9  * modify it under the terms of version 2 of the GNU General       *
  10  * Public License as published by the Free Software Foundation.    *
  11  * This program is distributed in the hope that it will be useful. *
  12  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
  13  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
  14  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
  15  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
  16  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
  17  * more details, a copy of which can be found in the file COPYING  *
  18  * included with this package.                                     *
  19  *******************************************************************/
  20 /* bsg definitions
  21  * No pointers to user data are allowed, all application buffers and sizes will
  22  * derived through the bsg interface.
  23  *
  24  * These are the vendor unique structures passed in using the bsg
  25  * FC_BSG_HST_VENDOR message code type.
  26  */
  27 #define LPFC_BSG_VENDOR_SET_CT_EVENT            1
  28 #define LPFC_BSG_VENDOR_GET_CT_EVENT            2
  29 #define LPFC_BSG_VENDOR_SEND_MGMT_RESP          3
  30 #define LPFC_BSG_VENDOR_DIAG_MODE               4
  31 #define LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK       5
  32 #define LPFC_BSG_VENDOR_GET_MGMT_REV            6
  33 #define LPFC_BSG_VENDOR_MBOX                    7
  34 #define LPFC_BSG_VENDOR_MENLO_CMD               8
  35 #define LPFC_BSG_VENDOR_MENLO_DATA              9
  36 #define LPFC_BSG_VENDOR_DIAG_MODE_END           10
  37 #define LPFC_BSG_VENDOR_LINK_DIAG_TEST          11
  38
  39 struct set_ct_event {
  40         uint32_t command;
  41         uint32_t type_mask;
  42         uint32_t ev_req_id;
  43         uint32_t ev_reg_id;
  44 };
  45
  46 struct get_ct_event {
  47         uint32_t command;
  48         uint32_t ev_reg_id;
  49         uint32_t ev_req_id;
  50 };
  51
  52 struct get_ct_event_reply {
  53         uint32_t immed_data;
  54         uint32_t type;
  55 };
  56
  57 struct send_mgmt_resp {
  58         uint32_t command;
  59         uint32_t tag;
  60 };
  61
  62
  63 #define INTERNAL_LOOP_BACK 0x1 /* adapter short cuts the loop internally */
  64 #define EXTERNAL_LOOP_BACK 0x2 /* requires an external loopback plug */
  65
  66 struct diag_mode_set {
  67         uint32_t command;
  68         uint32_t type;
  69         uint32_t timeout;
  70 };
  71
  72 struct sli4_link_diag {
  73         uint32_t command;
  74         uint32_t timeout;
  75         uint32_t test_id;
  76         uint32_t loops;
  77         uint32_t test_version;
  78         uint32_t error_action;
  79 };
  80
  81 struct diag_mode_test {
  82         uint32_t command;
  83 };
  84
  85 struct diag_status {
  86         uint32_t mbox_status;
  87         uint32_t shdr_status;
  88         uint32_t shdr_add_status;
  89 };
  90
  91 #define LPFC_WWNN_TYPE          0
  92 #define LPFC_WWPN_TYPE          1
  93
  94 struct get_mgmt_rev {
  95         uint32_t command;
  96 };
  97
  98 #define MANAGEMENT_MAJOR_REV   1
  99 #define MANAGEMENT_MINOR_REV   1
 100
 101 /* the MgmtRevInfo structure */
 102 struct MgmtRevInfo {
 103         uint32_t a_Major;
 104         uint32_t a_Minor;
 105 };
 106
 107 struct get_mgmt_rev_reply {
 108         struct MgmtRevInfo info;
 109 };
 110
 111 #define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */
 112
 113 /* BSG mailbox request header */
 114 struct dfc_mbox_req {
 115         uint32_t command;
 116         uint32_t mbOffset;
 117         uint32_t inExtWLen;
 118         uint32_t outExtWLen;
 119         uint32_t extMboxTag;
 120         uint32_t extSeqNum;
 121 };
 122
 123 /* Used for menlo command or menlo data. The xri is only used for menlo data */
 124 struct menlo_command {
 125         uint32_t cmd;
 126         uint32_t xri;
 127 };
 128
 129 struct menlo_response {
 130         uint32_t xri; /* return the xri of the iocb exchange */
 131 };
 132
 133 /*
 134  * macros and data structures for handling sli-config mailbox command
 135  * pass-through support, this header file is shared between user and
 136  * kernel spaces, note the set of macros are duplicates from lpfc_hw4.h,
 137  * with macro names prefixed with bsg_, as the macros defined in
 138  * lpfc_hw4.h are not accessible from user space.
 139  */
 140
 141 /* Macros to deal with bit fields. Each bit field must have 3 #defines
 142  * associated with it (_SHIFT, _MASK, and _WORD).
 143  * EG. For a bit field that is in the 7th bit of the "field4" field of a
 144  * structure and is 2 bits in size the following #defines must exist:
 145  *      struct temp {
 146  *              uint32_t        field1;
 147  *              uint32_t        field2;
 148  *              uint32_t        field3;
 149  *              uint32_t        field4;
 150  *      #define example_bit_field_SHIFT         7
 151  *      #define example_bit_field_MASK          0x03
 152  *      #define example_bit_field_WORD          field4
 153  *              uint32_t        field5;
 154  *      };
 155  * Then the macros below may be used to get or set the value of that field.
 156  * EG. To get the value of the bit field from the above example:
 157  *      struct temp t1;
 158  *      value = bsg_bf_get(example_bit_field, &t1);
 159  * And then to set that bit field:
 160  *      bsg_bf_set(example_bit_field, &t1, 2);
 161  * Or clear that bit field:
 162  *      bsg_bf_set(example_bit_field, &t1, 0);
 163  */
 164 #define bsg_bf_get_le32(name, ptr) \
 165         ((le32_to_cpu((ptr)->name##_WORD) >> name##_SHIFT) & name##_MASK)
 166 #define bsg_bf_get(name, ptr) \
 167         (((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK)
 168 #define bsg_bf_set_le32(name, ptr, value) \
 169         ((ptr)->name##_WORD = cpu_to_le32(((((value) & \
 170         name##_MASK) << name##_SHIFT) | (le32_to_cpu((ptr)->name##_WORD) & \
 171         ~(name##_MASK << name##_SHIFT)))))
 172 #define bsg_bf_set(name, ptr, value) \
 173         ((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
 174         ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
 175
 176 /*
 177  * The sli_config structure specified here is based on the following
 178  * restriction:
 179  *
 180  * -- SLI_CONFIG EMB=0, carrying MSEs, will carry subcommands without
 181  *    carrying HBD.
 182  * -- SLI_CONFIG EMB=1, not carrying MSE, will carry subcommands with or
 183  *    without carrying HBDs.
 184  */
 185
 186 struct lpfc_sli_config_mse {
 187         uint32_t pa_lo;
 188         uint32_t pa_hi;
 189         uint32_t buf_len;
 190 #define lpfc_mbox_sli_config_mse_len_SHIFT      0
 191 #define lpfc_mbox_sli_config_mse_len_MASK       0xffffff
 192 #define lpfc_mbox_sli_config_mse_len_WORD       buf_len
 193 };
 194
 195 struct lpfc_sli_config_hbd {
 196         uint32_t buf_len;
 197 #define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT 0
 198 #define lpfc_mbox_sli_config_ecmn_hbd_len_MASK  0xffffff
 199 #define lpfc_mbox_sli_config_ecmn_hbd_len_WORD  buf_len
 200         uint32_t pa_lo;
 201         uint32_t pa_hi;
 202 };
 203
 204 struct lpfc_sli_config_hdr {
 205         uint32_t word1;
 206 #define lpfc_mbox_hdr_emb_SHIFT         0
 207 #define lpfc_mbox_hdr_emb_MASK          0x00000001
 208 #define lpfc_mbox_hdr_emb_WORD          word1
 209 #define lpfc_mbox_hdr_mse_cnt_SHIFT     3
 210 #define lpfc_mbox_hdr_mse_cnt_MASK      0x0000001f
 211 #define lpfc_mbox_hdr_mse_cnt_WORD      word1
 212         uint32_t payload_length;
 213         uint32_t tag_lo;
 214         uint32_t tag_hi;
 215         uint32_t reserved5;
 216 };
 217
 218 struct lpfc_sli_config_emb0_subsys {
 219         struct lpfc_sli_config_hdr      sli_config_hdr;
 220 #define LPFC_MBX_SLI_CONFIG_MAX_MSE     19
 221         struct lpfc_sli_config_mse      mse[LPFC_MBX_SLI_CONFIG_MAX_MSE];
 222         uint32_t padding;
 223         uint32_t word64;
 224 #define lpfc_emb0_subcmnd_opcode_SHIFT  0
 225 #define lpfc_emb0_subcmnd_opcode_MASK   0xff
 226 #define lpfc_emb0_subcmnd_opcode_WORD   word64
 227 #define lpfc_emb0_subcmnd_subsys_SHIFT  8
 228 #define lpfc_emb0_subcmnd_subsys_MASK   0xff
 229 #define lpfc_emb0_subcmnd_subsys_WORD   word64
 230 /* Subsystem FCOE (0x0C) OpCodes */
 231 #define SLI_CONFIG_SUBSYS_FCOE          0x0C
 232 #define FCOE_OPCODE_READ_FCF            0x08
 233 #define FCOE_OPCODE_ADD_FCF             0x09
 234 };
 235
 236 struct lpfc_sli_config_emb1_subsys {
 237         struct lpfc_sli_config_hdr      sli_config_hdr;
 238         uint32_t word6;
 239 #define lpfc_emb1_subcmnd_opcode_SHIFT  0
 240 #define lpfc_emb1_subcmnd_opcode_MASK   0xff
 241 #define lpfc_emb1_subcmnd_opcode_WORD   word6
 242 #define lpfc_emb1_subcmnd_subsys_SHIFT  8
 243 #define lpfc_emb1_subcmnd_subsys_MASK   0xff
 244 #define lpfc_emb1_subcmnd_subsys_WORD   word6
 245 /* Subsystem COMN (0x01) OpCodes */
 246 #define SLI_CONFIG_SUBSYS_COMN          0x01
 247 #define COMN_OPCODE_READ_OBJECT         0xAB
 248 #define COMN_OPCODE_WRITE_OBJECT        0xAC
 249 #define COMN_OPCODE_READ_OBJECT_LIST    0xAD
 250 #define COMN_OPCODE_DELETE_OBJECT       0xAE
 251 #define COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES    0x79
 252 #define COMN_OPCODE_GET_CNTL_ATTRIBUTES 0x20
 253         uint32_t timeout;
 254         uint32_t request_length;
 255         uint32_t word9;
 256 #define lpfc_subcmnd_version_SHIFT      0
 257 #define lpfc_subcmnd_version_MASK       0xff
 258 #define lpfc_subcmnd_version_WORD       word9
 259         uint32_t word10;
 260 #define lpfc_subcmnd_ask_rd_len_SHIFT   0
 261 #define lpfc_subcmnd_ask_rd_len_MASK    0xffffff
 262 #define lpfc_subcmnd_ask_rd_len_WORD    word10
 263         uint32_t rd_offset;
 264         uint32_t obj_name[26];
 265         uint32_t hbd_count;
 266 #define LPFC_MBX_SLI_CONFIG_MAX_HBD     8
 267         struct lpfc_sli_config_hbd      hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD];
 268 };
 269
 270 struct lpfc_sli_config_mbox {
 271         uint32_t word0;
 272 #define lpfc_mqe_status_SHIFT           16
 273 #define lpfc_mqe_status_MASK            0x0000FFFF
 274 #define lpfc_mqe_status_WORD            word0
 275 #define lpfc_mqe_command_SHIFT          8
 276 #define lpfc_mqe_command_MASK           0x000000FF
 277 #define lpfc_mqe_command_WORD           word0
 278         union {
 279                 struct lpfc_sli_config_emb0_subsys sli_config_emb0_subsys;
 280                 struct lpfc_sli_config_emb1_subsys sli_config_emb1_subsys;
 281         } un;
 282 };
 283
 284 /* driver only */
 285 #define SLI_CONFIG_NOT_HANDLED          0
 286 #define SLI_CONFIG_HANDLED              1