PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / scsi / lpfc / lpfc_hbadisc.c
blob883ea2d9f237028e60dedf2e9bd828fca84bd63b
1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2004-2013 Emulex. All rights reserved. *
5 * EMULEX and SLI are trademarks of Emulex. *
6 * www.emulex.com *
7 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
8 * *
9 * This program is free software; you can redistribute it and/or *
10 * modify it under the terms of version 2 of the GNU General *
11 * Public License as published by the Free Software Foundation. *
12 * This program is distributed in the hope that it will be useful. *
13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17 * TO BE LEGALLY INVALID. See the GNU General Public License for *
18 * more details, a copy of which can be found in the file COPYING *
19 * included with this package. *
20 *******************************************************************/
22 #include <linux/blkdev.h>
23 #include <linux/delay.h>
24 #include <linux/slab.h>
25 #include <linux/pci.h>
26 #include <linux/kthread.h>
27 #include <linux/interrupt.h>
29 #include <scsi/scsi.h>
30 #include <scsi/scsi_device.h>
31 #include <scsi/scsi_host.h>
32 #include <scsi/scsi_transport_fc.h>
34 #include "lpfc_hw4.h"
35 #include "lpfc_hw.h"
36 #include "lpfc_nl.h"
37 #include "lpfc_disc.h"
38 #include "lpfc_sli.h"
39 #include "lpfc_sli4.h"
40 #include "lpfc_scsi.h"
41 #include "lpfc.h"
42 #include "lpfc_logmsg.h"
43 #include "lpfc_crtn.h"
44 #include "lpfc_vport.h"
45 #include "lpfc_debugfs.h"
47 /* AlpaArray for assignment of scsid for scan-down and bind_method */
48 static uint8_t lpfcAlpaArray[] = {
49 0xEF, 0xE8, 0xE4, 0xE2, 0xE1, 0xE0, 0xDC, 0xDA, 0xD9, 0xD6,
50 0xD5, 0xD4, 0xD3, 0xD2, 0xD1, 0xCE, 0xCD, 0xCC, 0xCB, 0xCA,
51 0xC9, 0xC7, 0xC6, 0xC5, 0xC3, 0xBC, 0xBA, 0xB9, 0xB6, 0xB5,
52 0xB4, 0xB3, 0xB2, 0xB1, 0xAE, 0xAD, 0xAC, 0xAB, 0xAA, 0xA9,
53 0xA7, 0xA6, 0xA5, 0xA3, 0x9F, 0x9E, 0x9D, 0x9B, 0x98, 0x97,
54 0x90, 0x8F, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7C, 0x7A, 0x79,
55 0x76, 0x75, 0x74, 0x73, 0x72, 0x71, 0x6E, 0x6D, 0x6C, 0x6B,
56 0x6A, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5C, 0x5A, 0x59, 0x56,
57 0x55, 0x54, 0x53, 0x52, 0x51, 0x4E, 0x4D, 0x4C, 0x4B, 0x4A,
58 0x49, 0x47, 0x46, 0x45, 0x43, 0x3C, 0x3A, 0x39, 0x36, 0x35,
59 0x34, 0x33, 0x32, 0x31, 0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29,
60 0x27, 0x26, 0x25, 0x23, 0x1F, 0x1E, 0x1D, 0x1B, 0x18, 0x17,
61 0x10, 0x0F, 0x08, 0x04, 0x02, 0x01
64 static void lpfc_disc_timeout_handler(struct lpfc_vport *);
65 static void lpfc_disc_flush_list(struct lpfc_vport *vport);
66 static void lpfc_unregister_fcfi_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
67 static int lpfc_fcf_inuse(struct lpfc_hba *);
69 void
70 lpfc_terminate_rport_io(struct fc_rport *rport)
72 struct lpfc_rport_data *rdata;
73 struct lpfc_nodelist * ndlp;
74 struct lpfc_hba *phba;
76 rdata = rport->dd_data;
77 ndlp = rdata->pnode;
79 if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
80 if (rport->roles & FC_RPORT_ROLE_FCP_TARGET)
81 printk(KERN_ERR "Cannot find remote node"
82 " to terminate I/O Data x%x\n",
83 rport->port_id);
84 return;
87 phba = ndlp->phba;
89 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT,
90 "rport terminate: sid:x%x did:x%x flg:x%x",
91 ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag);
93 if (ndlp->nlp_sid != NLP_NO_SID) {
94 lpfc_sli_abort_iocb(ndlp->vport,
95 &phba->sli.ring[phba->sli.fcp_ring],
96 ndlp->nlp_sid, 0, LPFC_CTX_TGT);
101 * This function will be called when dev_loss_tmo fire.
103 void
104 lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
106 struct lpfc_rport_data *rdata;
107 struct lpfc_nodelist * ndlp;
108 struct lpfc_vport *vport;
109 struct lpfc_hba *phba;
110 struct lpfc_work_evt *evtp;
111 int put_node;
112 int put_rport;
114 rdata = rport->dd_data;
115 ndlp = rdata->pnode;
116 if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
117 return;
119 vport = ndlp->vport;
120 phba = vport->phba;
122 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT,
123 "rport devlosscb: sid:x%x did:x%x flg:x%x",
124 ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag);
126 lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
127 "3181 dev_loss_callbk x%06x, rport %p flg x%x\n",
128 ndlp->nlp_DID, ndlp->rport, ndlp->nlp_flag);
130 /* Don't defer this if we are in the process of deleting the vport
131 * or unloading the driver. The unload will cleanup the node
132 * appropriately we just need to cleanup the ndlp rport info here.
134 if (vport->load_flag & FC_UNLOADING) {
135 put_node = rdata->pnode != NULL;
136 put_rport = ndlp->rport != NULL;
137 rdata->pnode = NULL;
138 ndlp->rport = NULL;
139 if (put_node)
140 lpfc_nlp_put(ndlp);
141 if (put_rport)
142 put_device(&rport->dev);
143 return;
146 if (ndlp->nlp_state == NLP_STE_MAPPED_NODE)
147 return;
149 if (ndlp->nlp_type & NLP_FABRIC) {
151 /* If the WWPN of the rport and ndlp don't match, ignore it */
152 if (rport->port_name != wwn_to_u64(ndlp->nlp_portname.u.wwn)) {
153 put_device(&rport->dev);
154 return;
158 evtp = &ndlp->dev_loss_evt;
160 if (!list_empty(&evtp->evt_listp))
161 return;
163 evtp->evt_arg1 = lpfc_nlp_get(ndlp);
165 spin_lock_irq(&phba->hbalock);
166 /* We need to hold the node by incrementing the reference
167 * count until this queued work is done
169 if (evtp->evt_arg1) {
170 evtp->evt = LPFC_EVT_DEV_LOSS;
171 list_add_tail(&evtp->evt_listp, &phba->work_list);
172 lpfc_worker_wake_up(phba);
174 spin_unlock_irq(&phba->hbalock);
176 return;
180 * lpfc_dev_loss_tmo_handler - Remote node devloss timeout handler
181 * @ndlp: Pointer to remote node object.
183 * This function is called from the worker thread when devloss timeout timer
184 * expires. For SLI4 host, this routine shall return 1 when at lease one
185 * remote node, including this @ndlp, is still in use of FCF; otherwise, this
186 * routine shall return 0 when there is no remote node is still in use of FCF
187 * when devloss timeout happened to this @ndlp.
189 static int
190 lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
192 struct lpfc_rport_data *rdata;
193 struct fc_rport *rport;
194 struct lpfc_vport *vport;
195 struct lpfc_hba *phba;
196 uint8_t *name;
197 int put_node;
198 int put_rport;
199 int warn_on = 0;
200 int fcf_inuse = 0;
202 rport = ndlp->rport;
204 if (!rport)
205 return fcf_inuse;
207 rdata = rport->dd_data;
208 name = (uint8_t *) &ndlp->nlp_portname;
209 vport = ndlp->vport;
210 phba = vport->phba;
212 if (phba->sli_rev == LPFC_SLI_REV4)
213 fcf_inuse = lpfc_fcf_inuse(phba);
215 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT,
216 "rport devlosstmo:did:x%x type:x%x id:x%x",
217 ndlp->nlp_DID, ndlp->nlp_type, rport->scsi_target_id);
219 lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
220 "3182 dev_loss_tmo_handler x%06x, rport %p flg x%x\n",
221 ndlp->nlp_DID, ndlp->rport, ndlp->nlp_flag);
223 /* Don't defer this if we are in the process of deleting the vport
224 * or unloading the driver. The unload will cleanup the node
225 * appropriately we just need to cleanup the ndlp rport info here.
227 if (vport->load_flag & FC_UNLOADING) {
228 if (ndlp->nlp_sid != NLP_NO_SID) {
229 /* flush the target */
230 lpfc_sli_abort_iocb(vport,
231 &phba->sli.ring[phba->sli.fcp_ring],
232 ndlp->nlp_sid, 0, LPFC_CTX_TGT);
234 put_node = rdata->pnode != NULL;
235 put_rport = ndlp->rport != NULL;
236 rdata->pnode = NULL;
237 ndlp->rport = NULL;
238 if (put_node)
239 lpfc_nlp_put(ndlp);
240 if (put_rport)
241 put_device(&rport->dev);
242 return fcf_inuse;
245 if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) {
246 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
247 "0284 Devloss timeout Ignored on "
248 "WWPN %x:%x:%x:%x:%x:%x:%x:%x "
249 "NPort x%x\n",
250 *name, *(name+1), *(name+2), *(name+3),
251 *(name+4), *(name+5), *(name+6), *(name+7),
252 ndlp->nlp_DID);
253 return fcf_inuse;
256 if (ndlp->nlp_type & NLP_FABRIC) {
257 /* We will clean up these Nodes in linkup */
258 put_node = rdata->pnode != NULL;
259 put_rport = ndlp->rport != NULL;
260 rdata->pnode = NULL;
261 ndlp->rport = NULL;
262 if (put_node)
263 lpfc_nlp_put(ndlp);
264 if (put_rport)
265 put_device(&rport->dev);
266 return fcf_inuse;
269 if (ndlp->nlp_sid != NLP_NO_SID) {
270 warn_on = 1;
271 /* flush the target */
272 lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
273 ndlp->nlp_sid, 0, LPFC_CTX_TGT);
276 if (warn_on) {
277 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
278 "0203 Devloss timeout on "
279 "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x "
280 "NPort x%06x Data: x%x x%x x%x\n",
281 *name, *(name+1), *(name+2), *(name+3),
282 *(name+4), *(name+5), *(name+6), *(name+7),
283 ndlp->nlp_DID, ndlp->nlp_flag,
284 ndlp->nlp_state, ndlp->nlp_rpi);
285 } else {
286 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
287 "0204 Devloss timeout on "
288 "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x "
289 "NPort x%06x Data: x%x x%x x%x\n",
290 *name, *(name+1), *(name+2), *(name+3),
291 *(name+4), *(name+5), *(name+6), *(name+7),
292 ndlp->nlp_DID, ndlp->nlp_flag,
293 ndlp->nlp_state, ndlp->nlp_rpi);
296 put_node = rdata->pnode != NULL;
297 put_rport = ndlp->rport != NULL;
298 rdata->pnode = NULL;
299 ndlp->rport = NULL;
300 if (put_node)
301 lpfc_nlp_put(ndlp);
302 if (put_rport)
303 put_device(&rport->dev);
305 if (!(vport->load_flag & FC_UNLOADING) &&
306 !(ndlp->nlp_flag & NLP_DELAY_TMO) &&
307 !(ndlp->nlp_flag & NLP_NPR_2B_DISC) &&
308 (ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) &&
309 (ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) &&
310 (ndlp->nlp_state != NLP_STE_PRLI_ISSUE))
311 lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM);
313 return fcf_inuse;
317 * lpfc_sli4_post_dev_loss_tmo_handler - SLI4 post devloss timeout handler
318 * @phba: Pointer to hba context object.
319 * @fcf_inuse: SLI4 FCF in-use state reported from devloss timeout handler.
320 * @nlp_did: remote node identifer with devloss timeout.
322 * This function is called from the worker thread after invoking devloss
323 * timeout handler and releasing the reference count for the ndlp with
324 * which the devloss timeout was handled for SLI4 host. For the devloss
325 * timeout of the last remote node which had been in use of FCF, when this
326 * routine is invoked, it shall be guaranteed that none of the remote are
327 * in-use of FCF. When devloss timeout to the last remote using the FCF,
328 * if the FIP engine is neither in FCF table scan process nor roundrobin
329 * failover process, the in-use FCF shall be unregistered. If the FIP
330 * engine is in FCF discovery process, the devloss timeout state shall
331 * be set for either the FCF table scan process or roundrobin failover
332 * process to unregister the in-use FCF.
334 static void
335 lpfc_sli4_post_dev_loss_tmo_handler(struct lpfc_hba *phba, int fcf_inuse,
336 uint32_t nlp_did)
338 /* If devloss timeout happened to a remote node when FCF had no
339 * longer been in-use, do nothing.
341 if (!fcf_inuse)
342 return;
344 if ((phba->hba_flag & HBA_FIP_SUPPORT) && !lpfc_fcf_inuse(phba)) {
345 spin_lock_irq(&phba->hbalock);
346 if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
347 if (phba->hba_flag & HBA_DEVLOSS_TMO) {
348 spin_unlock_irq(&phba->hbalock);
349 return;
351 phba->hba_flag |= HBA_DEVLOSS_TMO;
352 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
353 "2847 Last remote node (x%x) using "
354 "FCF devloss tmo\n", nlp_did);
356 if (phba->fcf.fcf_flag & FCF_REDISC_PROG) {
357 spin_unlock_irq(&phba->hbalock);
358 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
359 "2868 Devloss tmo to FCF rediscovery "
360 "in progress\n");
361 return;
363 if (!(phba->hba_flag & (FCF_TS_INPROG | FCF_RR_INPROG))) {
364 spin_unlock_irq(&phba->hbalock);
365 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
366 "2869 Devloss tmo to idle FIP engine, "
367 "unreg in-use FCF and rescan.\n");
368 /* Unregister in-use FCF and rescan */
369 lpfc_unregister_fcf_rescan(phba);
370 return;
372 spin_unlock_irq(&phba->hbalock);
373 if (phba->hba_flag & FCF_TS_INPROG)
374 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
375 "2870 FCF table scan in progress\n");
376 if (phba->hba_flag & FCF_RR_INPROG)
377 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
378 "2871 FLOGI roundrobin FCF failover "
379 "in progress\n");
381 lpfc_unregister_unused_fcf(phba);
385 * lpfc_alloc_fast_evt - Allocates data structure for posting event
386 * @phba: Pointer to hba context object.
388 * This function is called from the functions which need to post
389 * events from interrupt context. This function allocates data
390 * structure required for posting event. It also keeps track of
391 * number of events pending and prevent event storm when there are
392 * too many events.
394 struct lpfc_fast_path_event *
395 lpfc_alloc_fast_evt(struct lpfc_hba *phba) {
396 struct lpfc_fast_path_event *ret;
398 /* If there are lot of fast event do not exhaust memory due to this */
399 if (atomic_read(&phba->fast_event_count) > LPFC_MAX_EVT_COUNT)
400 return NULL;
402 ret = kzalloc(sizeof(struct lpfc_fast_path_event),
403 GFP_ATOMIC);
404 if (ret) {
405 atomic_inc(&phba->fast_event_count);
406 INIT_LIST_HEAD(&ret->work_evt.evt_listp);
407 ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
409 return ret;
413 * lpfc_free_fast_evt - Frees event data structure
414 * @phba: Pointer to hba context object.
415 * @evt: Event object which need to be freed.
417 * This function frees the data structure required for posting
418 * events.
420 void
421 lpfc_free_fast_evt(struct lpfc_hba *phba,
422 struct lpfc_fast_path_event *evt) {
424 atomic_dec(&phba->fast_event_count);
425 kfree(evt);
429 * lpfc_send_fastpath_evt - Posts events generated from fast path
430 * @phba: Pointer to hba context object.
431 * @evtp: Event data structure.
433 * This function is called from worker thread, when the interrupt
434 * context need to post an event. This function posts the event
435 * to fc transport netlink interface.
437 static void
438 lpfc_send_fastpath_evt(struct lpfc_hba *phba,
439 struct lpfc_work_evt *evtp)
441 unsigned long evt_category, evt_sub_category;
442 struct lpfc_fast_path_event *fast_evt_data;
443 char *evt_data;
444 uint32_t evt_data_size;
445 struct Scsi_Host *shost;
447 fast_evt_data = container_of(evtp, struct lpfc_fast_path_event,
448 work_evt);
450 evt_category = (unsigned long) fast_evt_data->un.fabric_evt.event_type;
451 evt_sub_category = (unsigned long) fast_evt_data->un.
452 fabric_evt.subcategory;
453 shost = lpfc_shost_from_vport(fast_evt_data->vport);
454 if (evt_category == FC_REG_FABRIC_EVENT) {
455 if (evt_sub_category == LPFC_EVENT_FCPRDCHKERR) {
456 evt_data = (char *) &fast_evt_data->un.read_check_error;
457 evt_data_size = sizeof(fast_evt_data->un.
458 read_check_error);
459 } else if ((evt_sub_category == LPFC_EVENT_FABRIC_BUSY) ||
460 (evt_sub_category == LPFC_EVENT_PORT_BUSY)) {
461 evt_data = (char *) &fast_evt_data->un.fabric_evt;
462 evt_data_size = sizeof(fast_evt_data->un.fabric_evt);
463 } else {
464 lpfc_free_fast_evt(phba, fast_evt_data);
465 return;
467 } else if (evt_category == FC_REG_SCSI_EVENT) {
468 switch (evt_sub_category) {
469 case LPFC_EVENT_QFULL:
470 case LPFC_EVENT_DEVBSY:
471 evt_data = (char *) &fast_evt_data->un.scsi_evt;
472 evt_data_size = sizeof(fast_evt_data->un.scsi_evt);
473 break;
474 case LPFC_EVENT_CHECK_COND:
475 evt_data = (char *) &fast_evt_data->un.check_cond_evt;
476 evt_data_size = sizeof(fast_evt_data->un.
477 check_cond_evt);
478 break;
479 case LPFC_EVENT_VARQUEDEPTH:
480 evt_data = (char *) &fast_evt_data->un.queue_depth_evt;
481 evt_data_size = sizeof(fast_evt_data->un.
482 queue_depth_evt);
483 break;
484 default:
485 lpfc_free_fast_evt(phba, fast_evt_data);
486 return;
488 } else {
489 lpfc_free_fast_evt(phba, fast_evt_data);
490 return;
493 fc_host_post_vendor_event(shost,
494 fc_get_event_number(),
495 evt_data_size,
496 evt_data,
497 LPFC_NL_VENDOR_ID);
499 lpfc_free_fast_evt(phba, fast_evt_data);
500 return;
503 static void
504 lpfc_work_list_done(struct lpfc_hba *phba)
506 struct lpfc_work_evt *evtp = NULL;
507 struct lpfc_nodelist *ndlp;
508 int free_evt;
509 int fcf_inuse;
510 uint32_t nlp_did;
512 spin_lock_irq(&phba->hbalock);
513 while (!list_empty(&phba->work_list)) {
514 list_remove_head((&phba->work_list), evtp, typeof(*evtp),
515 evt_listp);
516 spin_unlock_irq(&phba->hbalock);
517 free_evt = 1;
518 switch (evtp->evt) {
519 case LPFC_EVT_ELS_RETRY:
520 ndlp = (struct lpfc_nodelist *) (evtp->evt_arg1);
521 lpfc_els_retry_delay_handler(ndlp);
522 free_evt = 0; /* evt is part of ndlp */
523 /* decrement the node reference count held
524 * for this queued work
526 lpfc_nlp_put(ndlp);
527 break;
528 case LPFC_EVT_DEV_LOSS:
529 ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1);
530 fcf_inuse = lpfc_dev_loss_tmo_handler(ndlp);
531 free_evt = 0;
532 /* decrement the node reference count held for
533 * this queued work
535 nlp_did = ndlp->nlp_DID;
536 lpfc_nlp_put(ndlp);
537 if (phba->sli_rev == LPFC_SLI_REV4)
538 lpfc_sli4_post_dev_loss_tmo_handler(phba,
539 fcf_inuse,
540 nlp_did);
541 break;
542 case LPFC_EVT_ONLINE:
543 if (phba->link_state < LPFC_LINK_DOWN)
544 *(int *) (evtp->evt_arg1) = lpfc_online(phba);
545 else
546 *(int *) (evtp->evt_arg1) = 0;
547 complete((struct completion *)(evtp->evt_arg2));
548 break;
549 case LPFC_EVT_OFFLINE_PREP:
550 if (phba->link_state >= LPFC_LINK_DOWN)
551 lpfc_offline_prep(phba, LPFC_MBX_WAIT);
552 *(int *)(evtp->evt_arg1) = 0;
553 complete((struct completion *)(evtp->evt_arg2));
554 break;
555 case LPFC_EVT_OFFLINE:
556 lpfc_offline(phba);
557 lpfc_sli_brdrestart(phba);
558 *(int *)(evtp->evt_arg1) =
559 lpfc_sli_brdready(phba, HS_FFRDY | HS_MBRDY);
560 lpfc_unblock_mgmt_io(phba);
561 complete((struct completion *)(evtp->evt_arg2));
562 break;
563 case LPFC_EVT_WARM_START:
564 lpfc_offline(phba);
565 lpfc_reset_barrier(phba);
566 lpfc_sli_brdreset(phba);
567 lpfc_hba_down_post(phba);
568 *(int *)(evtp->evt_arg1) =
569 lpfc_sli_brdready(phba, HS_MBRDY);
570 lpfc_unblock_mgmt_io(phba);
571 complete((struct completion *)(evtp->evt_arg2));
572 break;
573 case LPFC_EVT_KILL:
574 lpfc_offline(phba);
575 *(int *)(evtp->evt_arg1)
576 = (phba->pport->stopped)
577 ? 0 : lpfc_sli_brdkill(phba);
578 lpfc_unblock_mgmt_io(phba);
579 complete((struct completion *)(evtp->evt_arg2));
580 break;
581 case LPFC_EVT_FASTPATH_MGMT_EVT:
582 lpfc_send_fastpath_evt(phba, evtp);
583 free_evt = 0;
584 break;
585 case LPFC_EVT_RESET_HBA:
586 if (!(phba->pport->load_flag & FC_UNLOADING))
587 lpfc_reset_hba(phba);
588 break;
590 if (free_evt)
591 kfree(evtp);
592 spin_lock_irq(&phba->hbalock);
594 spin_unlock_irq(&phba->hbalock);
598 static void
599 lpfc_work_done(struct lpfc_hba *phba)
601 struct lpfc_sli_ring *pring;
602 uint32_t ha_copy, status, control, work_port_events;
603 struct lpfc_vport **vports;
604 struct lpfc_vport *vport;
605 int i;
607 spin_lock_irq(&phba->hbalock);
608 ha_copy = phba->work_ha;
609 phba->work_ha = 0;
610 spin_unlock_irq(&phba->hbalock);
612 /* First, try to post the next mailbox command to SLI4 device */
613 if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
614 lpfc_sli4_post_async_mbox(phba);
616 if (ha_copy & HA_ERATT)
617 /* Handle the error attention event */
618 lpfc_handle_eratt(phba);
620 if (ha_copy & HA_MBATT)
621 lpfc_sli_handle_mb_event(phba);
623 if (ha_copy & HA_LATT)
624 lpfc_handle_latt(phba);
626 /* Process SLI4 events */
627 if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
628 if (phba->hba_flag & HBA_RRQ_ACTIVE)
629 lpfc_handle_rrq_active(phba);
630 if (phba->hba_flag & FCP_XRI_ABORT_EVENT)
631 lpfc_sli4_fcp_xri_abort_event_proc(phba);
632 if (phba->hba_flag & ELS_XRI_ABORT_EVENT)
633 lpfc_sli4_els_xri_abort_event_proc(phba);
634 if (phba->hba_flag & ASYNC_EVENT)
635 lpfc_sli4_async_event_proc(phba);
636 if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) {
637 spin_lock_irq(&phba->hbalock);
638 phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER;
639 spin_unlock_irq(&phba->hbalock);
640 lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
642 if (phba->fcf.fcf_flag & FCF_REDISC_EVT)
643 lpfc_sli4_fcf_redisc_event_proc(phba);
646 vports = lpfc_create_vport_work_array(phba);
647 if (vports != NULL)
648 for (i = 0; i <= phba->max_vports; i++) {
650 * We could have no vports in array if unloading, so if
651 * this happens then just use the pport
653 if (vports[i] == NULL && i == 0)
654 vport = phba->pport;
655 else
656 vport = vports[i];
657 if (vport == NULL)
658 break;
659 spin_lock_irq(&vport->work_port_lock);
660 work_port_events = vport->work_port_events;
661 vport->work_port_events &= ~work_port_events;
662 spin_unlock_irq(&vport->work_port_lock);
663 if (work_port_events & WORKER_DISC_TMO)
664 lpfc_disc_timeout_handler(vport);
665 if (work_port_events & WORKER_ELS_TMO)
666 lpfc_els_timeout_handler(vport);
667 if (work_port_events & WORKER_HB_TMO)
668 lpfc_hb_timeout_handler(phba);
669 if (work_port_events & WORKER_MBOX_TMO)
670 lpfc_mbox_timeout_handler(phba);
671 if (work_port_events & WORKER_FABRIC_BLOCK_TMO)
672 lpfc_unblock_fabric_iocbs(phba);
673 if (work_port_events & WORKER_FDMI_TMO)
674 lpfc_fdmi_timeout_handler(vport);
675 if (work_port_events & WORKER_RAMP_DOWN_QUEUE)
676 lpfc_ramp_down_queue_handler(phba);
677 if (work_port_events & WORKER_RAMP_UP_QUEUE)
678 lpfc_ramp_up_queue_handler(phba);
679 if (work_port_events & WORKER_DELAYED_DISC_TMO)
680 lpfc_delayed_disc_timeout_handler(vport);
682 lpfc_destroy_vport_work_array(phba, vports);
684 pring = &phba->sli.ring[LPFC_ELS_RING];
685 status = (ha_copy & (HA_RXMASK << (4*LPFC_ELS_RING)));
686 status >>= (4*LPFC_ELS_RING);
687 if ((status & HA_RXMASK) ||
688 (pring->flag & LPFC_DEFERRED_RING_EVENT) ||
689 (phba->hba_flag & HBA_SP_QUEUE_EVT)) {
690 if (pring->flag & LPFC_STOP_IOCB_EVENT) {
691 pring->flag |= LPFC_DEFERRED_RING_EVENT;
692 /* Set the lpfc data pending flag */
693 set_bit(LPFC_DATA_READY, &phba->data_flags);
694 } else {
695 if (phba->link_state >= LPFC_LINK_UP) {
696 pring->flag &= ~LPFC_DEFERRED_RING_EVENT;
697 lpfc_sli_handle_slow_ring_event(phba, pring,
698 (status &
699 HA_RXMASK));
702 if ((phba->sli_rev == LPFC_SLI_REV4) &
703 (!list_empty(&pring->txq)))
704 lpfc_drain_txq(phba);
706 * Turn on Ring interrupts
708 if (phba->sli_rev <= LPFC_SLI_REV3) {
709 spin_lock_irq(&phba->hbalock);
710 control = readl(phba->HCregaddr);
711 if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
712 lpfc_debugfs_slow_ring_trc(phba,
713 "WRK Enable ring: cntl:x%x hacopy:x%x",
714 control, ha_copy, 0);
716 control |= (HC_R0INT_ENA << LPFC_ELS_RING);
717 writel(control, phba->HCregaddr);
718 readl(phba->HCregaddr); /* flush */
719 } else {
720 lpfc_debugfs_slow_ring_trc(phba,
721 "WRK Ring ok: cntl:x%x hacopy:x%x",
722 control, ha_copy, 0);
724 spin_unlock_irq(&phba->hbalock);
727 lpfc_work_list_done(phba);
731 lpfc_do_work(void *p)
733 struct lpfc_hba *phba = p;
734 int rc;
736 set_user_nice(current, -20);
737 current->flags |= PF_NOFREEZE;
738 phba->data_flags = 0;
740 while (!kthread_should_stop()) {
741 /* wait and check worker queue activities */
742 rc = wait_event_interruptible(phba->work_waitq,
743 (test_and_clear_bit(LPFC_DATA_READY,
744 &phba->data_flags)
745 || kthread_should_stop()));
746 /* Signal wakeup shall terminate the worker thread */
747 if (rc) {
748 lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
749 "0433 Wakeup on signal: rc=x%x\n", rc);
750 break;
753 /* Attend pending lpfc data processing */
754 lpfc_work_done(phba);
756 phba->worker_thread = NULL;
757 lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
758 "0432 Worker thread stopped.\n");
759 return 0;
763 * This is only called to handle FC worker events. Since this a rare
764 * occurrence, we allocate a struct lpfc_work_evt structure here instead of
765 * embedding it in the IOCB.
768 lpfc_workq_post_event(struct lpfc_hba *phba, void *arg1, void *arg2,
769 uint32_t evt)
771 struct lpfc_work_evt *evtp;
772 unsigned long flags;
775 * All Mailbox completions and LPFC_ELS_RING rcv ring IOCB events will
776 * be queued to worker thread for processing
778 evtp = kmalloc(sizeof(struct lpfc_work_evt), GFP_ATOMIC);
779 if (!evtp)
780 return 0;
782 evtp->evt_arg1 = arg1;
783 evtp->evt_arg2 = arg2;
784 evtp->evt = evt;
786 spin_lock_irqsave(&phba->hbalock, flags);
787 list_add_tail(&evtp->evt_listp, &phba->work_list);
788 spin_unlock_irqrestore(&phba->hbalock, flags);
790 lpfc_worker_wake_up(phba);
792 return 1;
795 void
796 lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove)
798 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
799 struct lpfc_hba *phba = vport->phba;
800 struct lpfc_nodelist *ndlp, *next_ndlp;
801 int rc;
803 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
804 if (!NLP_CHK_NODE_ACT(ndlp))
805 continue;
806 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
807 continue;
808 if ((phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) ||
809 ((vport->port_type == LPFC_NPIV_PORT) &&
810 (ndlp->nlp_DID == NameServer_DID)))
811 lpfc_unreg_rpi(vport, ndlp);
813 /* Leave Fabric nodes alone on link down */
814 if ((phba->sli_rev < LPFC_SLI_REV4) &&
815 (!remove && ndlp->nlp_type & NLP_FABRIC))
816 continue;
817 rc = lpfc_disc_state_machine(vport, ndlp, NULL,
818 remove
819 ? NLP_EVT_DEVICE_RM
820 : NLP_EVT_DEVICE_RECOVERY);
822 if (phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) {
823 if (phba->sli_rev == LPFC_SLI_REV4)
824 lpfc_sli4_unreg_all_rpis(vport);
825 lpfc_mbx_unreg_vpi(vport);
826 spin_lock_irq(shost->host_lock);
827 vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
828 spin_unlock_irq(shost->host_lock);
832 void
833 lpfc_port_link_failure(struct lpfc_vport *vport)
835 lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
837 /* Cleanup any outstanding received buffers */
838 lpfc_cleanup_rcv_buffers(vport);
840 /* Cleanup any outstanding RSCN activity */
841 lpfc_els_flush_rscn(vport);
843 /* Cleanup any outstanding ELS commands */
844 lpfc_els_flush_cmd(vport);
846 lpfc_cleanup_rpis(vport, 0);
848 /* Turn off discovery timer if its running */
849 lpfc_can_disctmo(vport);
852 void
853 lpfc_linkdown_port(struct lpfc_vport *vport)
855 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
857 fc_host_post_event(shost, fc_get_event_number(), FCH_EVT_LINKDOWN, 0);
859 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
860 "Link Down: state:x%x rtry:x%x flg:x%x",
861 vport->port_state, vport->fc_ns_retry, vport->fc_flag);
863 lpfc_port_link_failure(vport);
865 /* Stop delayed Nport discovery */
866 spin_lock_irq(shost->host_lock);
867 vport->fc_flag &= ~FC_DISC_DELAYED;
868 spin_unlock_irq(shost->host_lock);
869 del_timer_sync(&vport->delayed_disc_tmo);
873 lpfc_linkdown(struct lpfc_hba *phba)
875 struct lpfc_vport *vport = phba->pport;
876 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
877 struct lpfc_vport **vports;
878 LPFC_MBOXQ_t *mb;
879 int i;
881 if (phba->link_state == LPFC_LINK_DOWN)
882 return 0;
884 /* Block all SCSI stack I/Os */
885 lpfc_scsi_dev_block(phba);
887 spin_lock_irq(&phba->hbalock);
888 phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE);
889 spin_unlock_irq(&phba->hbalock);
890 if (phba->link_state > LPFC_LINK_DOWN) {
891 phba->link_state = LPFC_LINK_DOWN;
892 spin_lock_irq(shost->host_lock);
893 phba->pport->fc_flag &= ~FC_LBIT;
894 spin_unlock_irq(shost->host_lock);
896 vports = lpfc_create_vport_work_array(phba);
897 if (vports != NULL)
898 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
899 /* Issue a LINK DOWN event to all nodes */
900 lpfc_linkdown_port(vports[i]);
902 lpfc_destroy_vport_work_array(phba, vports);
903 /* Clean up any firmware default rpi's */
904 mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
905 if (mb) {
906 lpfc_unreg_did(phba, 0xffff, LPFC_UNREG_ALL_DFLT_RPIS, mb);
907 mb->vport = vport;
908 mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
909 if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT)
910 == MBX_NOT_FINISHED) {
911 mempool_free(mb, phba->mbox_mem_pool);
915 /* Setup myDID for link up if we are in pt2pt mode */
916 if (phba->pport->fc_flag & FC_PT2PT) {
917 phba->pport->fc_myDID = 0;
918 mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
919 if (mb) {
920 lpfc_config_link(phba, mb);
921 mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
922 mb->vport = vport;
923 if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT)
924 == MBX_NOT_FINISHED) {
925 mempool_free(mb, phba->mbox_mem_pool);
928 spin_lock_irq(shost->host_lock);
929 phba->pport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI);
930 spin_unlock_irq(shost->host_lock);
933 return 0;
936 static void
937 lpfc_linkup_cleanup_nodes(struct lpfc_vport *vport)
939 struct lpfc_nodelist *ndlp;
941 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
942 if (!NLP_CHK_NODE_ACT(ndlp))
943 continue;
944 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
945 continue;
946 if (ndlp->nlp_type & NLP_FABRIC) {
947 /* On Linkup its safe to clean up the ndlp
948 * from Fabric connections.
950 if (ndlp->nlp_DID != Fabric_DID)
951 lpfc_unreg_rpi(vport, ndlp);
952 lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
953 } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) {
954 /* Fail outstanding IO now since device is
955 * marked for PLOGI.
957 lpfc_unreg_rpi(vport, ndlp);
962 static void
963 lpfc_linkup_port(struct lpfc_vport *vport)
965 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
966 struct lpfc_hba *phba = vport->phba;
968 if ((vport->load_flag & FC_UNLOADING) != 0)
969 return;
971 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
972 "Link Up: top:x%x speed:x%x flg:x%x",
973 phba->fc_topology, phba->fc_linkspeed, phba->link_flag);
975 /* If NPIV is not enabled, only bring the physical port up */
976 if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
977 (vport != phba->pport))
978 return;
980 fc_host_post_event(shost, fc_get_event_number(), FCH_EVT_LINKUP, 0);
982 spin_lock_irq(shost->host_lock);
983 vport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI | FC_ABORT_DISCOVERY |
984 FC_RSCN_MODE | FC_NLP_MORE | FC_RSCN_DISCOVERY);
985 vport->fc_flag |= FC_NDISC_ACTIVE;
986 vport->fc_ns_retry = 0;
987 spin_unlock_irq(shost->host_lock);
989 if (vport->fc_flag & FC_LBIT)
990 lpfc_linkup_cleanup_nodes(vport);
994 static int
995 lpfc_linkup(struct lpfc_hba *phba)
997 struct lpfc_vport **vports;
998 int i;
1000 lpfc_cleanup_wt_rrqs(phba);
1001 phba->link_state = LPFC_LINK_UP;
1003 /* Unblock fabric iocbs if they are blocked */
1004 clear_bit(FABRIC_COMANDS_BLOCKED, &phba->bit_flags);
1005 del_timer_sync(&phba->fabric_block_timer);
1007 vports = lpfc_create_vport_work_array(phba);
1008 if (vports != NULL)
1009 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
1010 lpfc_linkup_port(vports[i]);
1011 lpfc_destroy_vport_work_array(phba, vports);
1013 return 0;
1017 * This routine handles processing a CLEAR_LA mailbox
1018 * command upon completion. It is setup in the LPFC_MBOXQ
1019 * as the completion routine when the command is
1020 * handed off to the SLI layer.
1022 static void
1023 lpfc_mbx_cmpl_clear_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
1025 struct lpfc_vport *vport = pmb->vport;
1026 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
1027 struct lpfc_sli *psli = &phba->sli;
1028 MAILBOX_t *mb = &pmb->u.mb;
1029 uint32_t control;
1031 /* Since we don't do discovery right now, turn these off here */
1032 psli->ring[psli->extra_ring].flag &= ~LPFC_STOP_IOCB_EVENT;
1033 psli->ring[psli->fcp_ring].flag &= ~LPFC_STOP_IOCB_EVENT;
1034 psli->ring[psli->next_ring].flag &= ~LPFC_STOP_IOCB_EVENT;
1036 /* Check for error */
1037 if ((mb->mbxStatus) && (mb->mbxStatus != 0x1601)) {
1038 /* CLEAR_LA mbox error <mbxStatus> state <hba_state> */
1039 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
1040 "0320 CLEAR_LA mbxStatus error x%x hba "
1041 "state x%x\n",
1042 mb->mbxStatus, vport->port_state);
1043 phba->link_state = LPFC_HBA_ERROR;
1044 goto out;
1047 if (vport->port_type == LPFC_PHYSICAL_PORT)
1048 phba->link_state = LPFC_HBA_READY;
1050 spin_lock_irq(&phba->hbalock);
1051 psli->sli_flag |= LPFC_PROCESS_LA;
1052 control = readl(phba->HCregaddr);
1053 control |= HC_LAINT_ENA;
1054 writel(control, phba->HCregaddr);
1055 readl(phba->HCregaddr); /* flush */
1056 spin_unlock_irq(&phba->hbalock);
1057 mempool_free(pmb, phba->mbox_mem_pool);
1058 return;
1060 out:
1061 /* Device Discovery completes */
1062 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
1063 "0225 Device Discovery completes\n");
1064 mempool_free(pmb, phba->mbox_mem_pool);
1066 spin_lock_irq(shost->host_lock);
1067 vport->fc_flag &= ~FC_ABORT_DISCOVERY;
1068 spin_unlock_irq(shost->host_lock);
1070 lpfc_can_disctmo(vport);
1072 /* turn on Link Attention interrupts */
1074 spin_lock_irq(&phba->hbalock);
1075 psli->sli_flag |= LPFC_PROCESS_LA;
1076 control = readl(phba->HCregaddr);
1077 control |= HC_LAINT_ENA;
1078 writel(control, phba->HCregaddr);
1079 readl(phba->HCregaddr); /* flush */
1080 spin_unlock_irq(&phba->hbalock);
1082 return;
1086 static void
1087 lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
1089 struct lpfc_vport *vport = pmb->vport;
1091 if (pmb->u.mb.mbxStatus)
1092 goto out;
1094 mempool_free(pmb, phba->mbox_mem_pool);
1096 /* don't perform discovery for SLI4 loopback diagnostic test */
1097 if ((phba->sli_rev == LPFC_SLI_REV4) &&
1098 !(phba->hba_flag & HBA_FCOE_MODE) &&
1099 (phba->link_flag & LS_LOOPBACK_MODE))
1100 return;
1102 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP &&
1103 vport->fc_flag & FC_PUBLIC_LOOP &&
1104 !(vport->fc_flag & FC_LBIT)) {
1105 /* Need to wait for FAN - use discovery timer
1106 * for timeout. port_state is identically
1107 * LPFC_LOCAL_CFG_LINK while waiting for FAN
1109 lpfc_set_disctmo(vport);
1110 return;
1113 /* Start discovery by sending a FLOGI. port_state is identically
1114 * LPFC_FLOGI while waiting for FLOGI cmpl
1116 if (vport->port_state != LPFC_FLOGI || vport->fc_flag & FC_PT2PT_PLOGI)
1117 lpfc_initial_flogi(vport);
1118 return;
1120 out:
1121 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
1122 "0306 CONFIG_LINK mbxStatus error x%x "
1123 "HBA state x%x\n",
1124 pmb->u.mb.mbxStatus, vport->port_state);
1125 mempool_free(pmb, phba->mbox_mem_pool);
1127 lpfc_linkdown(phba);
1129 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
1130 "0200 CONFIG_LINK bad hba state x%x\n",
1131 vport->port_state);
1133 lpfc_issue_clear_la(phba, vport);
1134 return;
1138 * lpfc_sli4_clear_fcf_rr_bmask
1139 * @phba pointer to the struct lpfc_hba for this port.
1140 * This fucnction resets the round robin bit mask and clears the
1141 * fcf priority list. The list deletions are done while holding the
1142 * hbalock. The ON_LIST flag and the FLOGI_FAILED flags are cleared
1143 * from the lpfc_fcf_pri record.
1145 void
1146 lpfc_sli4_clear_fcf_rr_bmask(struct lpfc_hba *phba)
1148 struct lpfc_fcf_pri *fcf_pri;
1149 struct lpfc_fcf_pri *next_fcf_pri;
1150 memset(phba->fcf.fcf_rr_bmask, 0, sizeof(*phba->fcf.fcf_rr_bmask));
1151 spin_lock_irq(&phba->hbalock);
1152 list_for_each_entry_safe(fcf_pri, next_fcf_pri,
1153 &phba->fcf.fcf_pri_list, list) {
1154 list_del_init(&fcf_pri->list);
1155 fcf_pri->fcf_rec.flag = 0;
1157 spin_unlock_irq(&phba->hbalock);
1159 static void
1160 lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
1162 struct lpfc_vport *vport = mboxq->vport;
1164 if (mboxq->u.mb.mbxStatus) {
1165 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
1166 "2017 REG_FCFI mbxStatus error x%x "
1167 "HBA state x%x\n",
1168 mboxq->u.mb.mbxStatus, vport->port_state);
1169 goto fail_out;
1172 /* Start FCoE discovery by sending a FLOGI. */
1173 phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi, &mboxq->u.mqe.un.reg_fcfi);
1174 /* Set the FCFI registered flag */
1175 spin_lock_irq(&phba->hbalock);
1176 phba->fcf.fcf_flag |= FCF_REGISTERED;
1177 spin_unlock_irq(&phba->hbalock);
1179 /* If there is a pending FCoE event, restart FCF table scan. */
1180 if ((!(phba->hba_flag & FCF_RR_INPROG)) &&
1181 lpfc_check_pending_fcoe_event(phba, LPFC_UNREG_FCF))
1182 goto fail_out;
1184 /* Mark successful completion of FCF table scan */
1185 spin_lock_irq(&phba->hbalock);
1186 phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE);
1187 phba->hba_flag &= ~FCF_TS_INPROG;
1188 if (vport->port_state != LPFC_FLOGI) {
1189 phba->hba_flag |= FCF_RR_INPROG;
1190 spin_unlock_irq(&phba->hbalock);
1191 lpfc_issue_init_vfi(vport);
1192 goto out;
1194 spin_unlock_irq(&phba->hbalock);
1195 goto out;
1197 fail_out:
1198 spin_lock_irq(&phba->hbalock);
1199 phba->hba_flag &= ~FCF_RR_INPROG;
1200 spin_unlock_irq(&phba->hbalock);
1201 out:
1202 mempool_free(mboxq, phba->mbox_mem_pool);
1206 * lpfc_fab_name_match - Check if the fcf fabric name match.
1207 * @fab_name: pointer to fabric name.
1208 * @new_fcf_record: pointer to fcf record.
1210 * This routine compare the fcf record's fabric name with provided
1211 * fabric name. If the fabric name are identical this function
1212 * returns 1 else return 0.
1214 static uint32_t
1215 lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record)
1217 if (fab_name[0] != bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record))
1218 return 0;
1219 if (fab_name[1] != bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record))
1220 return 0;
1221 if (fab_name[2] != bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record))
1222 return 0;
1223 if (fab_name[3] != bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record))
1224 return 0;
1225 if (fab_name[4] != bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record))
1226 return 0;
1227 if (fab_name[5] != bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record))
1228 return 0;
1229 if (fab_name[6] != bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record))
1230 return 0;
1231 if (fab_name[7] != bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record))
1232 return 0;
1233 return 1;
1237 * lpfc_sw_name_match - Check if the fcf switch name match.
1238 * @fab_name: pointer to fabric name.
1239 * @new_fcf_record: pointer to fcf record.
1241 * This routine compare the fcf record's switch name with provided
1242 * switch name. If the switch name are identical this function
1243 * returns 1 else return 0.
1245 static uint32_t
1246 lpfc_sw_name_match(uint8_t *sw_name, struct fcf_record *new_fcf_record)
1248 if (sw_name[0] != bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record))
1249 return 0;
1250 if (sw_name[1] != bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record))
1251 return 0;
1252 if (sw_name[2] != bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record))
1253 return 0;
1254 if (sw_name[3] != bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record))
1255 return 0;
1256 if (sw_name[4] != bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record))
1257 return 0;
1258 if (sw_name[5] != bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record))
1259 return 0;
1260 if (sw_name[6] != bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record))
1261 return 0;
1262 if (sw_name[7] != bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record))
1263 return 0;
1264 return 1;
1268 * lpfc_mac_addr_match - Check if the fcf mac address match.
1269 * @mac_addr: pointer to mac address.
1270 * @new_fcf_record: pointer to fcf record.
1272 * This routine compare the fcf record's mac address with HBA's
1273 * FCF mac address. If the mac addresses are identical this function
1274 * returns 1 else return 0.
1276 static uint32_t
1277 lpfc_mac_addr_match(uint8_t *mac_addr, struct fcf_record *new_fcf_record)
1279 if (mac_addr[0] != bf_get(lpfc_fcf_record_mac_0, new_fcf_record))
1280 return 0;
1281 if (mac_addr[1] != bf_get(lpfc_fcf_record_mac_1, new_fcf_record))
1282 return 0;
1283 if (mac_addr[2] != bf_get(lpfc_fcf_record_mac_2, new_fcf_record))
1284 return 0;
1285 if (mac_addr[3] != bf_get(lpfc_fcf_record_mac_3, new_fcf_record))
1286 return 0;
1287 if (mac_addr[4] != bf_get(lpfc_fcf_record_mac_4, new_fcf_record))
1288 return 0;
1289 if (mac_addr[5] != bf_get(lpfc_fcf_record_mac_5, new_fcf_record))
1290 return 0;
1291 return 1;
1294 static bool
1295 lpfc_vlan_id_match(uint16_t curr_vlan_id, uint16_t new_vlan_id)
1297 return (curr_vlan_id == new_vlan_id);
1301 * lpfc_update_fcf_record - Update driver fcf record
1302 * __lpfc_update_fcf_record_pri - update the lpfc_fcf_pri record.
1303 * @phba: pointer to lpfc hba data structure.
1304 * @fcf_index: Index for the lpfc_fcf_record.
1305 * @new_fcf_record: pointer to hba fcf record.
1307 * This routine updates the driver FCF priority record from the new HBA FCF
1308 * record. This routine is called with the host lock held.
1310 static void
1311 __lpfc_update_fcf_record_pri(struct lpfc_hba *phba, uint16_t fcf_index,
1312 struct fcf_record *new_fcf_record
1315 struct lpfc_fcf_pri *fcf_pri;
1317 fcf_pri = &phba->fcf.fcf_pri[fcf_index];
1318 fcf_pri->fcf_rec.fcf_index = fcf_index;
1319 /* FCF record priority */
1320 fcf_pri->fcf_rec.priority = new_fcf_record->fip_priority;
1325 * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba.
1326 * @fcf: pointer to driver fcf record.
1327 * @new_fcf_record: pointer to fcf record.
1329 * This routine copies the FCF information from the FCF
1330 * record to lpfc_hba data structure.
1332 static void
1333 lpfc_copy_fcf_record(struct lpfc_fcf_rec *fcf_rec,
1334 struct fcf_record *new_fcf_record)
1336 /* Fabric name */
1337 fcf_rec->fabric_name[0] =
1338 bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record);
1339 fcf_rec->fabric_name[1] =
1340 bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record);
1341 fcf_rec->fabric_name[2] =
1342 bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record);
1343 fcf_rec->fabric_name[3] =
1344 bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record);
1345 fcf_rec->fabric_name[4] =
1346 bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record);
1347 fcf_rec->fabric_name[5] =
1348 bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record);
1349 fcf_rec->fabric_name[6] =
1350 bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record);
1351 fcf_rec->fabric_name[7] =
1352 bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record);
1353 /* Mac address */
1354 fcf_rec->mac_addr[0] = bf_get(lpfc_fcf_record_mac_0, new_fcf_record);
1355 fcf_rec->mac_addr[1] = bf_get(lpfc_fcf_record_mac_1, new_fcf_record);
1356 fcf_rec->mac_addr[2] = bf_get(lpfc_fcf_record_mac_2, new_fcf_record);
1357 fcf_rec->mac_addr[3] = bf_get(lpfc_fcf_record_mac_3, new_fcf_record);
1358 fcf_rec->mac_addr[4] = bf_get(lpfc_fcf_record_mac_4, new_fcf_record);
1359 fcf_rec->mac_addr[5] = bf_get(lpfc_fcf_record_mac_5, new_fcf_record);
1360 /* FCF record index */
1361 fcf_rec->fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
1362 /* FCF record priority */
1363 fcf_rec->priority = new_fcf_record->fip_priority;
1364 /* Switch name */
1365 fcf_rec->switch_name[0] =
1366 bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record);
1367 fcf_rec->switch_name[1] =
1368 bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record);
1369 fcf_rec->switch_name[2] =
1370 bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record);
1371 fcf_rec->switch_name[3] =
1372 bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record);
1373 fcf_rec->switch_name[4] =
1374 bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record);
1375 fcf_rec->switch_name[5] =
1376 bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record);
1377 fcf_rec->switch_name[6] =
1378 bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record);
1379 fcf_rec->switch_name[7] =
1380 bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record);
1384 * lpfc_update_fcf_record - Update driver fcf record
1385 * @phba: pointer to lpfc hba data structure.
1386 * @fcf_rec: pointer to driver fcf record.
1387 * @new_fcf_record: pointer to hba fcf record.
1388 * @addr_mode: address mode to be set to the driver fcf record.
1389 * @vlan_id: vlan tag to be set to the driver fcf record.
1390 * @flag: flag bits to be set to the driver fcf record.
1392 * This routine updates the driver FCF record from the new HBA FCF record
1393 * together with the address mode, vlan_id, and other informations. This
1394 * routine is called with the host lock held.
1396 static void
1397 __lpfc_update_fcf_record(struct lpfc_hba *phba, struct lpfc_fcf_rec *fcf_rec,
1398 struct fcf_record *new_fcf_record, uint32_t addr_mode,
1399 uint16_t vlan_id, uint32_t flag)
1401 /* Copy the fields from the HBA's FCF record */
1402 lpfc_copy_fcf_record(fcf_rec, new_fcf_record);
1403 /* Update other fields of driver FCF record */
1404 fcf_rec->addr_mode = addr_mode;
1405 fcf_rec->vlan_id = vlan_id;
1406 fcf_rec->flag |= (flag | RECORD_VALID);
1407 __lpfc_update_fcf_record_pri(phba,
1408 bf_get(lpfc_fcf_record_fcf_index, new_fcf_record),
1409 new_fcf_record);
1413 * lpfc_register_fcf - Register the FCF with hba.
1414 * @phba: pointer to lpfc hba data structure.
1416 * This routine issues a register fcfi mailbox command to register
1417 * the fcf with HBA.
1419 static void
1420 lpfc_register_fcf(struct lpfc_hba *phba)
1422 LPFC_MBOXQ_t *fcf_mbxq;
1423 int rc;
1425 spin_lock_irq(&phba->hbalock);
1426 /* If the FCF is not available do nothing. */
1427 if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) {
1428 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG);
1429 spin_unlock_irq(&phba->hbalock);
1430 return;
1433 /* The FCF is already registered, start discovery */
1434 if (phba->fcf.fcf_flag & FCF_REGISTERED) {
1435 phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE);
1436 phba->hba_flag &= ~FCF_TS_INPROG;
1437 if (phba->pport->port_state != LPFC_FLOGI &&
1438 phba->pport->fc_flag & FC_FABRIC) {
1439 phba->hba_flag |= FCF_RR_INPROG;
1440 spin_unlock_irq(&phba->hbalock);
1441 lpfc_initial_flogi(phba->pport);
1442 return;
1444 spin_unlock_irq(&phba->hbalock);
1445 return;
1447 spin_unlock_irq(&phba->hbalock);
1449 fcf_mbxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
1450 if (!fcf_mbxq) {
1451 spin_lock_irq(&phba->hbalock);
1452 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG);
1453 spin_unlock_irq(&phba->hbalock);
1454 return;
1457 lpfc_reg_fcfi(phba, fcf_mbxq);
1458 fcf_mbxq->vport = phba->pport;
1459 fcf_mbxq->mbox_cmpl = lpfc_mbx_cmpl_reg_fcfi;
1460 rc = lpfc_sli_issue_mbox(phba, fcf_mbxq, MBX_NOWAIT);
1461 if (rc == MBX_NOT_FINISHED) {
1462 spin_lock_irq(&phba->hbalock);
1463 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG);
1464 spin_unlock_irq(&phba->hbalock);
1465 mempool_free(fcf_mbxq, phba->mbox_mem_pool);
1468 return;
1472 * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery.
1473 * @phba: pointer to lpfc hba data structure.
1474 * @new_fcf_record: pointer to fcf record.
1475 * @boot_flag: Indicates if this record used by boot bios.
1476 * @addr_mode: The address mode to be used by this FCF
1477 * @vlan_id: The vlan id to be used as vlan tagging by this FCF.
1479 * This routine compare the fcf record with connect list obtained from the
1480 * config region to decide if this FCF can be used for SAN discovery. It returns
1481 * 1 if this record can be used for SAN discovery else return zero. If this FCF
1482 * record can be used for SAN discovery, the boot_flag will indicate if this FCF
1483 * is used by boot bios and addr_mode will indicate the addressing mode to be
1484 * used for this FCF when the function returns.
1485 * If the FCF record need to be used with a particular vlan id, the vlan is
1486 * set in the vlan_id on return of the function. If not VLAN tagging need to
1487 * be used with the FCF vlan_id will be set to LPFC_FCOE_NULL_VID;
1489 static int
1490 lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
1491 struct fcf_record *new_fcf_record,
1492 uint32_t *boot_flag, uint32_t *addr_mode,
1493 uint16_t *vlan_id)
1495 struct lpfc_fcf_conn_entry *conn_entry;
1496 int i, j, fcf_vlan_id = 0;
1498 /* Find the lowest VLAN id in the FCF record */
1499 for (i = 0; i < 512; i++) {
1500 if (new_fcf_record->vlan_bitmap[i]) {
1501 fcf_vlan_id = i * 8;
1502 j = 0;
1503 while (!((new_fcf_record->vlan_bitmap[i] >> j) & 1)) {
1504 j++;
1505 fcf_vlan_id++;
1507 break;
1511 /* FCF not valid/available or solicitation in progress */
1512 if (!bf_get(lpfc_fcf_record_fcf_avail, new_fcf_record) ||
1513 !bf_get(lpfc_fcf_record_fcf_valid, new_fcf_record) ||
1514 bf_get(lpfc_fcf_record_fcf_sol, new_fcf_record))
1515 return 0;
1517 if (!(phba->hba_flag & HBA_FIP_SUPPORT)) {
1518 *boot_flag = 0;
1519 *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
1520 new_fcf_record);
1521 if (phba->valid_vlan)
1522 *vlan_id = phba->vlan_id;
1523 else
1524 *vlan_id = LPFC_FCOE_NULL_VID;
1525 return 1;
1529 * If there are no FCF connection table entry, driver connect to all
1530 * FCFs.
1532 if (list_empty(&phba->fcf_conn_rec_list)) {
1533 *boot_flag = 0;
1534 *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
1535 new_fcf_record);
1538 * When there are no FCF connect entries, use driver's default
1539 * addressing mode - FPMA.
1541 if (*addr_mode & LPFC_FCF_FPMA)
1542 *addr_mode = LPFC_FCF_FPMA;
1544 /* If FCF record report a vlan id use that vlan id */
1545 if (fcf_vlan_id)
1546 *vlan_id = fcf_vlan_id;
1547 else
1548 *vlan_id = LPFC_FCOE_NULL_VID;
1549 return 1;
1552 list_for_each_entry(conn_entry,
1553 &phba->fcf_conn_rec_list, list) {
1554 if (!(conn_entry->conn_rec.flags & FCFCNCT_VALID))
1555 continue;
1557 if ((conn_entry->conn_rec.flags & FCFCNCT_FBNM_VALID) &&
1558 !lpfc_fab_name_match(conn_entry->conn_rec.fabric_name,
1559 new_fcf_record))
1560 continue;
1561 if ((conn_entry->conn_rec.flags & FCFCNCT_SWNM_VALID) &&
1562 !lpfc_sw_name_match(conn_entry->conn_rec.switch_name,
1563 new_fcf_record))
1564 continue;
1565 if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) {
1567 * If the vlan bit map does not have the bit set for the
1568 * vlan id to be used, then it is not a match.
1570 if (!(new_fcf_record->vlan_bitmap
1571 [conn_entry->conn_rec.vlan_tag / 8] &
1572 (1 << (conn_entry->conn_rec.vlan_tag % 8))))
1573 continue;
1577 * If connection record does not support any addressing mode,
1578 * skip the FCF record.
1580 if (!(bf_get(lpfc_fcf_record_mac_addr_prov, new_fcf_record)
1581 & (LPFC_FCF_FPMA | LPFC_FCF_SPMA)))
1582 continue;
1585 * Check if the connection record specifies a required
1586 * addressing mode.
1588 if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
1589 !(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)) {
1592 * If SPMA required but FCF not support this continue.
1594 if ((conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
1595 !(bf_get(lpfc_fcf_record_mac_addr_prov,
1596 new_fcf_record) & LPFC_FCF_SPMA))
1597 continue;
1600 * If FPMA required but FCF not support this continue.
1602 if (!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
1603 !(bf_get(lpfc_fcf_record_mac_addr_prov,
1604 new_fcf_record) & LPFC_FCF_FPMA))
1605 continue;
1609 * This fcf record matches filtering criteria.
1611 if (conn_entry->conn_rec.flags & FCFCNCT_BOOT)
1612 *boot_flag = 1;
1613 else
1614 *boot_flag = 0;
1617 * If user did not specify any addressing mode, or if the
1618 * preferred addressing mode specified by user is not supported
1619 * by FCF, allow fabric to pick the addressing mode.
1621 *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
1622 new_fcf_record);
1624 * If the user specified a required address mode, assign that
1625 * address mode
1627 if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
1628 (!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)))
1629 *addr_mode = (conn_entry->conn_rec.flags &
1630 FCFCNCT_AM_SPMA) ?
1631 LPFC_FCF_SPMA : LPFC_FCF_FPMA;
1633 * If the user specified a preferred address mode, use the
1634 * addr mode only if FCF support the addr_mode.
1636 else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
1637 (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
1638 (conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
1639 (*addr_mode & LPFC_FCF_SPMA))
1640 *addr_mode = LPFC_FCF_SPMA;
1641 else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
1642 (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
1643 !(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
1644 (*addr_mode & LPFC_FCF_FPMA))
1645 *addr_mode = LPFC_FCF_FPMA;
1647 /* If matching connect list has a vlan id, use it */
1648 if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID)
1649 *vlan_id = conn_entry->conn_rec.vlan_tag;
1651 * If no vlan id is specified in connect list, use the vlan id
1652 * in the FCF record
1654 else if (fcf_vlan_id)
1655 *vlan_id = fcf_vlan_id;
1656 else
1657 *vlan_id = LPFC_FCOE_NULL_VID;
1659 return 1;
1662 return 0;
1666 * lpfc_check_pending_fcoe_event - Check if there is pending fcoe event.
1667 * @phba: pointer to lpfc hba data structure.
1668 * @unreg_fcf: Unregister FCF if FCF table need to be re-scaned.
1670 * This function check if there is any fcoe event pending while driver
1671 * scan FCF entries. If there is any pending event, it will restart the
1672 * FCF saning and return 1 else return 0.
1675 lpfc_check_pending_fcoe_event(struct lpfc_hba *phba, uint8_t unreg_fcf)
1678 * If the Link is up and no FCoE events while in the
1679 * FCF discovery, no need to restart FCF discovery.
1681 if ((phba->link_state >= LPFC_LINK_UP) &&
1682 (phba->fcoe_eventtag == phba->fcoe_eventtag_at_fcf_scan))
1683 return 0;
1685 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
1686 "2768 Pending link or FCF event during current "
1687 "handling of the previous event: link_state:x%x, "
1688 "evt_tag_at_scan:x%x, evt_tag_current:x%x\n",
1689 phba->link_state, phba->fcoe_eventtag_at_fcf_scan,
1690 phba->fcoe_eventtag);
1692 spin_lock_irq(&phba->hbalock);
1693 phba->fcf.fcf_flag &= ~FCF_AVAILABLE;
1694 spin_unlock_irq(&phba->hbalock);
1696 if (phba->link_state >= LPFC_LINK_UP) {
1697 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
1698 "2780 Restart FCF table scan due to "
1699 "pending FCF event:evt_tag_at_scan:x%x, "
1700 "evt_tag_current:x%x\n",
1701 phba->fcoe_eventtag_at_fcf_scan,
1702 phba->fcoe_eventtag);
1703 lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST);
1704 } else {
1706 * Do not continue FCF discovery and clear FCF_TS_INPROG
1707 * flag
1709 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
1710 "2833 Stop FCF discovery process due to link "
1711 "state change (x%x)\n", phba->link_state);
1712 spin_lock_irq(&phba->hbalock);
1713 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG);
1714 phba->fcf.fcf_flag &= ~(FCF_REDISC_FOV | FCF_DISCOVERY);
1715 spin_unlock_irq(&phba->hbalock);
1718 /* Unregister the currently registered FCF if required */
1719 if (unreg_fcf) {
1720 spin_lock_irq(&phba->hbalock);
1721 phba->fcf.fcf_flag &= ~FCF_REGISTERED;
1722 spin_unlock_irq(&phba->hbalock);
1723 lpfc_sli4_unregister_fcf(phba);
1725 return 1;
1729 * lpfc_sli4_new_fcf_random_select - Randomly select an eligible new fcf record
1730 * @phba: pointer to lpfc hba data structure.
1731 * @fcf_cnt: number of eligible fcf record seen so far.
1733 * This function makes an running random selection decision on FCF record to
1734 * use through a sequence of @fcf_cnt eligible FCF records with equal
1735 * probability. To perform integer manunipulation of random numbers with
1736 * size unit32_t, the lower 16 bits of the 32-bit random number returned
1737 * from prandom_u32() are taken as the random random number generated.
1739 * Returns true when outcome is for the newly read FCF record should be
1740 * chosen; otherwise, return false when outcome is for keeping the previously
1741 * chosen FCF record.
1743 static bool
1744 lpfc_sli4_new_fcf_random_select(struct lpfc_hba *phba, uint32_t fcf_cnt)
1746 uint32_t rand_num;
1748 /* Get 16-bit uniform random number */
1749 rand_num = 0xFFFF & prandom_u32();
1751 /* Decision with probability 1/fcf_cnt */
1752 if ((fcf_cnt * rand_num) < 0xFFFF)
1753 return true;
1754 else
1755 return false;
1759 * lpfc_sli4_fcf_rec_mbox_parse - Parse read_fcf mbox command.
1760 * @phba: pointer to lpfc hba data structure.
1761 * @mboxq: pointer to mailbox object.
1762 * @next_fcf_index: pointer to holder of next fcf index.
1764 * This routine parses the non-embedded fcf mailbox command by performing the
1765 * necessarily error checking, non-embedded read FCF record mailbox command
1766 * SGE parsing, and endianness swapping.
1768 * Returns the pointer to the new FCF record in the non-embedded mailbox
1769 * command DMA memory if successfully, other NULL.
1771 static struct fcf_record *
1772 lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
1773 uint16_t *next_fcf_index)
1775 void *virt_addr;
1776 dma_addr_t phys_addr;
1777 struct lpfc_mbx_sge sge;
1778 struct lpfc_mbx_read_fcf_tbl *read_fcf;
1779 uint32_t shdr_status, shdr_add_status;
1780 union lpfc_sli4_cfg_shdr *shdr;
1781 struct fcf_record *new_fcf_record;
1783 /* Get the first SGE entry from the non-embedded DMA memory. This
1784 * routine only uses a single SGE.
1786 lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
1787 phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
1788 if (unlikely(!mboxq->sge_array)) {
1789 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
1790 "2524 Failed to get the non-embedded SGE "
1791 "virtual address\n");
1792 return NULL;
1794 virt_addr = mboxq->sge_array->addr[0];
1796 shdr = (union lpfc_sli4_cfg_shdr *)virt_addr;
1797 lpfc_sli_pcimem_bcopy(shdr, shdr,
1798 sizeof(union lpfc_sli4_cfg_shdr));
1799 shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
1800 shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
1801 if (shdr_status || shdr_add_status) {
1802 if (shdr_status == STATUS_FCF_TABLE_EMPTY)
1803 lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
1804 "2726 READ_FCF_RECORD Indicates empty "
1805 "FCF table.\n");
1806 else
1807 lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
1808 "2521 READ_FCF_RECORD mailbox failed "
1809 "with status x%x add_status x%x, "
1810 "mbx\n", shdr_status, shdr_add_status);
1811 return NULL;
1814 /* Interpreting the returned information of the FCF record */
1815 read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
1816 lpfc_sli_pcimem_bcopy(read_fcf, read_fcf,
1817 sizeof(struct lpfc_mbx_read_fcf_tbl));
1818 *next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf);
1819 new_fcf_record = (struct fcf_record *)(virt_addr +
1820 sizeof(struct lpfc_mbx_read_fcf_tbl));
1821 lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record,
1822 offsetof(struct fcf_record, vlan_bitmap));
1823 new_fcf_record->word137 = le32_to_cpu(new_fcf_record->word137);
1824 new_fcf_record->word138 = le32_to_cpu(new_fcf_record->word138);
1826 return new_fcf_record;
1830 * lpfc_sli4_log_fcf_record_info - Log the information of a fcf record
1831 * @phba: pointer to lpfc hba data structure.
1832 * @fcf_record: pointer to the fcf record.
1833 * @vlan_id: the lowest vlan identifier associated to this fcf record.
1834 * @next_fcf_index: the index to the next fcf record in hba's fcf table.
1836 * This routine logs the detailed FCF record if the LOG_FIP loggin is
1837 * enabled.
1839 static void
1840 lpfc_sli4_log_fcf_record_info(struct lpfc_hba *phba,
1841 struct fcf_record *fcf_record,
1842 uint16_t vlan_id,
1843 uint16_t next_fcf_index)
1845 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
1846 "2764 READ_FCF_RECORD:\n"
1847 "\tFCF_Index : x%x\n"
1848 "\tFCF_Avail : x%x\n"
1849 "\tFCF_Valid : x%x\n"
1850 "\tFCF_SOL : x%x\n"
1851 "\tFIP_Priority : x%x\n"
1852 "\tMAC_Provider : x%x\n"
1853 "\tLowest VLANID : x%x\n"
1854 "\tFCF_MAC Addr : x%x:%x:%x:%x:%x:%x\n"
1855 "\tFabric_Name : x%x:%x:%x:%x:%x:%x:%x:%x\n"
1856 "\tSwitch_Name : x%x:%x:%x:%x:%x:%x:%x:%x\n"
1857 "\tNext_FCF_Index: x%x\n",
1858 bf_get(lpfc_fcf_record_fcf_index, fcf_record),
1859 bf_get(lpfc_fcf_record_fcf_avail, fcf_record),
1860 bf_get(lpfc_fcf_record_fcf_valid, fcf_record),
1861 bf_get(lpfc_fcf_record_fcf_sol, fcf_record),
1862 fcf_record->fip_priority,
1863 bf_get(lpfc_fcf_record_mac_addr_prov, fcf_record),
1864 vlan_id,
1865 bf_get(lpfc_fcf_record_mac_0, fcf_record),
1866 bf_get(lpfc_fcf_record_mac_1, fcf_record),
1867 bf_get(lpfc_fcf_record_mac_2, fcf_record),
1868 bf_get(lpfc_fcf_record_mac_3, fcf_record),
1869 bf_get(lpfc_fcf_record_mac_4, fcf_record),
1870 bf_get(lpfc_fcf_record_mac_5, fcf_record),
1871 bf_get(lpfc_fcf_record_fab_name_0, fcf_record),
1872 bf_get(lpfc_fcf_record_fab_name_1, fcf_record),
1873 bf_get(lpfc_fcf_record_fab_name_2, fcf_record),
1874 bf_get(lpfc_fcf_record_fab_name_3, fcf_record),
1875 bf_get(lpfc_fcf_record_fab_name_4, fcf_record),
1876 bf_get(lpfc_fcf_record_fab_name_5, fcf_record),
1877 bf_get(lpfc_fcf_record_fab_name_6, fcf_record),
1878 bf_get(lpfc_fcf_record_fab_name_7, fcf_record),
1879 bf_get(lpfc_fcf_record_switch_name_0, fcf_record),
1880 bf_get(lpfc_fcf_record_switch_name_1, fcf_record),
1881 bf_get(lpfc_fcf_record_switch_name_2, fcf_record),
1882 bf_get(lpfc_fcf_record_switch_name_3, fcf_record),
1883 bf_get(lpfc_fcf_record_switch_name_4, fcf_record),
1884 bf_get(lpfc_fcf_record_switch_name_5, fcf_record),
1885 bf_get(lpfc_fcf_record_switch_name_6, fcf_record),
1886 bf_get(lpfc_fcf_record_switch_name_7, fcf_record),
1887 next_fcf_index);
1891 lpfc_sli4_fcf_record_match - testing new FCF record for matching existing FCF
1892 * @phba: pointer to lpfc hba data structure.
1893 * @fcf_rec: pointer to an existing FCF record.
1894 * @new_fcf_record: pointer to a new FCF record.
1895 * @new_vlan_id: vlan id from the new FCF record.
1897 * This function performs matching test of a new FCF record against an existing
1898 * FCF record. If the new_vlan_id passed in is LPFC_FCOE_IGNORE_VID, vlan id
1899 * will not be used as part of the FCF record matching criteria.
1901 * Returns true if all the fields matching, otherwise returns false.
1903 static bool
1904 lpfc_sli4_fcf_record_match(struct lpfc_hba *phba,
1905 struct lpfc_fcf_rec *fcf_rec,
1906 struct fcf_record *new_fcf_record,
1907 uint16_t new_vlan_id)
1909 if (new_vlan_id != LPFC_FCOE_IGNORE_VID)
1910 if (!lpfc_vlan_id_match(fcf_rec->vlan_id, new_vlan_id))
1911 return false;
1912 if (!lpfc_mac_addr_match(fcf_rec->mac_addr, new_fcf_record))
1913 return false;
1914 if (!lpfc_sw_name_match(fcf_rec->switch_name, new_fcf_record))
1915 return false;
1916 if (!lpfc_fab_name_match(fcf_rec->fabric_name, new_fcf_record))
1917 return false;
1918 if (fcf_rec->priority != new_fcf_record->fip_priority)
1919 return false;
1920 return true;
1924 * lpfc_sli4_fcf_rr_next_proc - processing next roundrobin fcf
1925 * @vport: Pointer to vport object.
1926 * @fcf_index: index to next fcf.
1928 * This function processing the roundrobin fcf failover to next fcf index.
1929 * When this function is invoked, there will be a current fcf registered
1930 * for flogi.
1931 * Return: 0 for continue retrying flogi on currently registered fcf;
1932 * 1 for stop flogi on currently registered fcf;
1934 int lpfc_sli4_fcf_rr_next_proc(struct lpfc_vport *vport, uint16_t fcf_index)
1936 struct lpfc_hba *phba = vport->phba;
1937 int rc;
1939 if (fcf_index == LPFC_FCOE_FCF_NEXT_NONE) {
1940 spin_lock_irq(&phba->hbalock);
1941 if (phba->hba_flag & HBA_DEVLOSS_TMO) {
1942 spin_unlock_irq(&phba->hbalock);
1943 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
1944 "2872 Devloss tmo with no eligible "
1945 "FCF, unregister in-use FCF (x%x) "
1946 "and rescan FCF table\n",
1947 phba->fcf.current_rec.fcf_indx);
1948 lpfc_unregister_fcf_rescan(phba);
1949 goto stop_flogi_current_fcf;
1951 /* Mark the end to FLOGI roundrobin failover */
1952 phba->hba_flag &= ~FCF_RR_INPROG;
1953 /* Allow action to new fcf asynchronous event */
1954 phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE);
1955 spin_unlock_irq(&phba->hbalock);
1956 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
1957 "2865 No FCF available, stop roundrobin FCF "
1958 "failover and change port state:x%x/x%x\n",
1959 phba->pport->port_state, LPFC_VPORT_UNKNOWN);
1960 phba->pport->port_state = LPFC_VPORT_UNKNOWN;
1961 goto stop_flogi_current_fcf;
1962 } else {
1963 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_ELS,
1964 "2794 Try FLOGI roundrobin FCF failover to "
1965 "(x%x)\n", fcf_index);
1966 rc = lpfc_sli4_fcf_rr_read_fcf_rec(phba, fcf_index);
1967 if (rc)
1968 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS,
1969 "2761 FLOGI roundrobin FCF failover "
1970 "failed (rc:x%x) to read FCF (x%x)\n",
1971 rc, phba->fcf.current_rec.fcf_indx);
1972 else
1973 goto stop_flogi_current_fcf;
1975 return 0;
1977 stop_flogi_current_fcf:
1978 lpfc_can_disctmo(vport);
1979 return 1;
1983 * lpfc_sli4_fcf_pri_list_del
1984 * @phba: pointer to lpfc hba data structure.
1985 * @fcf_index the index of the fcf record to delete
1986 * This routine checks the on list flag of the fcf_index to be deleted.
1987 * If it is one the list then it is removed from the list, and the flag
1988 * is cleared. This routine grab the hbalock before removing the fcf
1989 * record from the list.
1991 static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
1992 uint16_t fcf_index)
1994 struct lpfc_fcf_pri *new_fcf_pri;
1996 new_fcf_pri = &phba->fcf.fcf_pri[fcf_index];
1997 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
1998 "3058 deleting idx x%x pri x%x flg x%x\n",
1999 fcf_index, new_fcf_pri->fcf_rec.priority,
2000 new_fcf_pri->fcf_rec.flag);
2001 spin_lock_irq(&phba->hbalock);
2002 if (new_fcf_pri->fcf_rec.flag & LPFC_FCF_ON_PRI_LIST) {
2003 if (phba->fcf.current_rec.priority ==
2004 new_fcf_pri->fcf_rec.priority)
2005 phba->fcf.eligible_fcf_cnt--;
2006 list_del_init(&new_fcf_pri->list);
2007 new_fcf_pri->fcf_rec.flag &= ~LPFC_FCF_ON_PRI_LIST;
2009 spin_unlock_irq(&phba->hbalock);
2013 * lpfc_sli4_set_fcf_flogi_fail
2014 * @phba: pointer to lpfc hba data structure.
2015 * @fcf_index the index of the fcf record to update
2016 * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
2017 * flag so the the round robin slection for the particular priority level
2018 * will try a different fcf record that does not have this bit set.
2019 * If the fcf record is re-read for any reason this flag is cleared brfore
2020 * adding it to the priority list.
2022 void
2023 lpfc_sli4_set_fcf_flogi_fail(struct lpfc_hba *phba, uint16_t fcf_index)
2025 struct lpfc_fcf_pri *new_fcf_pri;
2026 new_fcf_pri = &phba->fcf.fcf_pri[fcf_index];
2027 spin_lock_irq(&phba->hbalock);
2028 new_fcf_pri->fcf_rec.flag |= LPFC_FCF_FLOGI_FAILED;
2029 spin_unlock_irq(&phba->hbalock);
2033 * lpfc_sli4_fcf_pri_list_add
2034 * @phba: pointer to lpfc hba data structure.
2035 * @fcf_index the index of the fcf record to add
2036 * This routine checks the priority of the fcf_index to be added.
2037 * If it is a lower priority than the current head of the fcf_pri list
2038 * then it is added to the list in the right order.
2039 * If it is the same priority as the current head of the list then it
2040 * is added to the head of the list and its bit in the rr_bmask is set.
2041 * If the fcf_index to be added is of a higher priority than the current
2042 * head of the list then the rr_bmask is cleared, its bit is set in the
2043 * rr_bmask and it is added to the head of the list.
2044 * returns:
2045 * 0=success 1=failure
2047 int lpfc_sli4_fcf_pri_list_add(struct lpfc_hba *phba, uint16_t fcf_index,
2048 struct fcf_record *new_fcf_record)
2050 uint16_t current_fcf_pri;
2051 uint16_t last_index;
2052 struct lpfc_fcf_pri *fcf_pri;
2053 struct lpfc_fcf_pri *next_fcf_pri;
2054 struct lpfc_fcf_pri *new_fcf_pri;
2055 int ret;
2057 new_fcf_pri = &phba->fcf.fcf_pri[fcf_index];
2058 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2059 "3059 adding idx x%x pri x%x flg x%x\n",
2060 fcf_index, new_fcf_record->fip_priority,
2061 new_fcf_pri->fcf_rec.flag);
2062 spin_lock_irq(&phba->hbalock);
2063 if (new_fcf_pri->fcf_rec.flag & LPFC_FCF_ON_PRI_LIST)
2064 list_del_init(&new_fcf_pri->list);
2065 new_fcf_pri->fcf_rec.fcf_index = fcf_index;
2066 new_fcf_pri->fcf_rec.priority = new_fcf_record->fip_priority;
2067 if (list_empty(&phba->fcf.fcf_pri_list)) {
2068 list_add(&new_fcf_pri->list, &phba->fcf.fcf_pri_list);
2069 ret = lpfc_sli4_fcf_rr_index_set(phba,
2070 new_fcf_pri->fcf_rec.fcf_index);
2071 goto out;
2074 last_index = find_first_bit(phba->fcf.fcf_rr_bmask,
2075 LPFC_SLI4_FCF_TBL_INDX_MAX);
2076 if (last_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) {
2077 ret = 0; /* Empty rr list */
2078 goto out;
2080 current_fcf_pri = phba->fcf.fcf_pri[last_index].fcf_rec.priority;
2081 if (new_fcf_pri->fcf_rec.priority <= current_fcf_pri) {
2082 list_add(&new_fcf_pri->list, &phba->fcf.fcf_pri_list);
2083 if (new_fcf_pri->fcf_rec.priority < current_fcf_pri) {
2084 memset(phba->fcf.fcf_rr_bmask, 0,
2085 sizeof(*phba->fcf.fcf_rr_bmask));
2086 /* fcfs_at_this_priority_level = 1; */
2087 phba->fcf.eligible_fcf_cnt = 1;
2088 } else
2089 /* fcfs_at_this_priority_level++; */
2090 phba->fcf.eligible_fcf_cnt++;
2091 ret = lpfc_sli4_fcf_rr_index_set(phba,
2092 new_fcf_pri->fcf_rec.fcf_index);
2093 goto out;
2096 list_for_each_entry_safe(fcf_pri, next_fcf_pri,
2097 &phba->fcf.fcf_pri_list, list) {
2098 if (new_fcf_pri->fcf_rec.priority <=
2099 fcf_pri->fcf_rec.priority) {
2100 if (fcf_pri->list.prev == &phba->fcf.fcf_pri_list)
2101 list_add(&new_fcf_pri->list,
2102 &phba->fcf.fcf_pri_list);
2103 else
2104 list_add(&new_fcf_pri->list,
2105 &((struct lpfc_fcf_pri *)
2106 fcf_pri->list.prev)->list);
2107 ret = 0;
2108 goto out;
2109 } else if (fcf_pri->list.next == &phba->fcf.fcf_pri_list
2110 || new_fcf_pri->fcf_rec.priority <
2111 next_fcf_pri->fcf_rec.priority) {
2112 list_add(&new_fcf_pri->list, &fcf_pri->list);
2113 ret = 0;
2114 goto out;
2116 if (new_fcf_pri->fcf_rec.priority > fcf_pri->fcf_rec.priority)
2117 continue;
2120 ret = 1;
2121 out:
2122 /* we use = instead of |= to clear the FLOGI_FAILED flag. */
2123 new_fcf_pri->fcf_rec.flag = LPFC_FCF_ON_PRI_LIST;
2124 spin_unlock_irq(&phba->hbalock);
2125 return ret;
2129 * lpfc_mbx_cmpl_fcf_scan_read_fcf_rec - fcf scan read_fcf mbox cmpl handler.
2130 * @phba: pointer to lpfc hba data structure.
2131 * @mboxq: pointer to mailbox object.
2133 * This function iterates through all the fcf records available in
2134 * HBA and chooses the optimal FCF record for discovery. After finding
2135 * the FCF for discovery it registers the FCF record and kicks start
2136 * discovery.
2137 * If FCF_IN_USE flag is set in currently used FCF, the routine tries to
2138 * use an FCF record which matches fabric name and mac address of the
2139 * currently used FCF record.
2140 * If the driver supports only one FCF, it will try to use the FCF record
2141 * used by BOOT_BIOS.
2143 void
2144 lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
2146 struct fcf_record *new_fcf_record;
2147 uint32_t boot_flag, addr_mode;
2148 uint16_t fcf_index, next_fcf_index;
2149 struct lpfc_fcf_rec *fcf_rec = NULL;
2150 uint16_t vlan_id;
2151 uint32_t seed;
2152 bool select_new_fcf;
2153 int rc;
2155 /* If there is pending FCoE event restart FCF table scan */
2156 if (lpfc_check_pending_fcoe_event(phba, LPFC_SKIP_UNREG_FCF)) {
2157 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2158 return;
2161 /* Parse the FCF record from the non-embedded mailbox command */
2162 new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq,
2163 &next_fcf_index);
2164 if (!new_fcf_record) {
2165 lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
2166 "2765 Mailbox command READ_FCF_RECORD "
2167 "failed to retrieve a FCF record.\n");
2168 /* Let next new FCF event trigger fast failover */
2169 spin_lock_irq(&phba->hbalock);
2170 phba->hba_flag &= ~FCF_TS_INPROG;
2171 spin_unlock_irq(&phba->hbalock);
2172 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2173 return;
2176 /* Check the FCF record against the connection list */
2177 rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag,
2178 &addr_mode, &vlan_id);
2180 /* Log the FCF record information if turned on */
2181 lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id,
2182 next_fcf_index);
2185 * If the fcf record does not match with connect list entries
2186 * read the next entry; otherwise, this is an eligible FCF
2187 * record for roundrobin FCF failover.
2189 if (!rc) {
2190 lpfc_sli4_fcf_pri_list_del(phba,
2191 bf_get(lpfc_fcf_record_fcf_index,
2192 new_fcf_record));
2193 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
2194 "2781 FCF (x%x) failed connection "
2195 "list check: (x%x/x%x/%x)\n",
2196 bf_get(lpfc_fcf_record_fcf_index,
2197 new_fcf_record),
2198 bf_get(lpfc_fcf_record_fcf_avail,
2199 new_fcf_record),
2200 bf_get(lpfc_fcf_record_fcf_valid,
2201 new_fcf_record),
2202 bf_get(lpfc_fcf_record_fcf_sol,
2203 new_fcf_record));
2204 if ((phba->fcf.fcf_flag & FCF_IN_USE) &&
2205 lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec,
2206 new_fcf_record, LPFC_FCOE_IGNORE_VID)) {
2207 if (bf_get(lpfc_fcf_record_fcf_index, new_fcf_record) !=
2208 phba->fcf.current_rec.fcf_indx) {
2209 lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
2210 "2862 FCF (x%x) matches property "
2211 "of in-use FCF (x%x)\n",
2212 bf_get(lpfc_fcf_record_fcf_index,
2213 new_fcf_record),
2214 phba->fcf.current_rec.fcf_indx);
2215 goto read_next_fcf;
2218 * In case the current in-use FCF record becomes
2219 * invalid/unavailable during FCF discovery that
2220 * was not triggered by fast FCF failover process,
2221 * treat it as fast FCF failover.
2223 if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND) &&
2224 !(phba->fcf.fcf_flag & FCF_REDISC_FOV)) {
2225 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
2226 "2835 Invalid in-use FCF "
2227 "(x%x), enter FCF failover "
2228 "table scan.\n",
2229 phba->fcf.current_rec.fcf_indx);
2230 spin_lock_irq(&phba->hbalock);
2231 phba->fcf.fcf_flag |= FCF_REDISC_FOV;
2232 spin_unlock_irq(&phba->hbalock);
2233 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2234 lpfc_sli4_fcf_scan_read_fcf_rec(phba,
2235 LPFC_FCOE_FCF_GET_FIRST);
2236 return;
2239 goto read_next_fcf;
2240 } else {
2241 fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
2242 rc = lpfc_sli4_fcf_pri_list_add(phba, fcf_index,
2243 new_fcf_record);
2244 if (rc)
2245 goto read_next_fcf;
2249 * If this is not the first FCF discovery of the HBA, use last
2250 * FCF record for the discovery. The condition that a rescan
2251 * matches the in-use FCF record: fabric name, switch name, mac
2252 * address, and vlan_id.
2254 spin_lock_irq(&phba->hbalock);
2255 if (phba->fcf.fcf_flag & FCF_IN_USE) {
2256 if (phba->cfg_fcf_failover_policy == LPFC_FCF_FOV &&
2257 lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec,
2258 new_fcf_record, vlan_id)) {
2259 if (bf_get(lpfc_fcf_record_fcf_index, new_fcf_record) ==
2260 phba->fcf.current_rec.fcf_indx) {
2261 phba->fcf.fcf_flag |= FCF_AVAILABLE;
2262 if (phba->fcf.fcf_flag & FCF_REDISC_PEND)
2263 /* Stop FCF redisc wait timer */
2264 __lpfc_sli4_stop_fcf_redisc_wait_timer(
2265 phba);
2266 else if (phba->fcf.fcf_flag & FCF_REDISC_FOV)
2267 /* Fast failover, mark completed */
2268 phba->fcf.fcf_flag &= ~FCF_REDISC_FOV;
2269 spin_unlock_irq(&phba->hbalock);
2270 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2271 "2836 New FCF matches in-use "
2272 "FCF (x%x), port_state:x%x, "
2273 "fc_flag:x%x\n",
2274 phba->fcf.current_rec.fcf_indx,
2275 phba->pport->port_state,
2276 phba->pport->fc_flag);
2277 goto out;
2278 } else
2279 lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
2280 "2863 New FCF (x%x) matches "
2281 "property of in-use FCF (x%x)\n",
2282 bf_get(lpfc_fcf_record_fcf_index,
2283 new_fcf_record),
2284 phba->fcf.current_rec.fcf_indx);
2287 * Read next FCF record from HBA searching for the matching
2288 * with in-use record only if not during the fast failover
2289 * period. In case of fast failover period, it shall try to
2290 * determine whether the FCF record just read should be the
2291 * next candidate.
2293 if (!(phba->fcf.fcf_flag & FCF_REDISC_FOV)) {
2294 spin_unlock_irq(&phba->hbalock);
2295 goto read_next_fcf;
2299 * Update on failover FCF record only if it's in FCF fast-failover
2300 * period; otherwise, update on current FCF record.
2302 if (phba->fcf.fcf_flag & FCF_REDISC_FOV)
2303 fcf_rec = &phba->fcf.failover_rec;
2304 else
2305 fcf_rec = &phba->fcf.current_rec;
2307 if (phba->fcf.fcf_flag & FCF_AVAILABLE) {
2309 * If the driver FCF record does not have boot flag
2310 * set and new hba fcf record has boot flag set, use
2311 * the new hba fcf record.
2313 if (boot_flag && !(fcf_rec->flag & BOOT_ENABLE)) {
2314 /* Choose this FCF record */
2315 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2316 "2837 Update current FCF record "
2317 "(x%x) with new FCF record (x%x)\n",
2318 fcf_rec->fcf_indx,
2319 bf_get(lpfc_fcf_record_fcf_index,
2320 new_fcf_record));
2321 __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record,
2322 addr_mode, vlan_id, BOOT_ENABLE);
2323 spin_unlock_irq(&phba->hbalock);
2324 goto read_next_fcf;
2327 * If the driver FCF record has boot flag set and the
2328 * new hba FCF record does not have boot flag, read
2329 * the next FCF record.
2331 if (!boot_flag && (fcf_rec->flag & BOOT_ENABLE)) {
2332 spin_unlock_irq(&phba->hbalock);
2333 goto read_next_fcf;
2336 * If the new hba FCF record has lower priority value
2337 * than the driver FCF record, use the new record.
2339 if (new_fcf_record->fip_priority < fcf_rec->priority) {
2340 /* Choose the new FCF record with lower priority */
2341 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2342 "2838 Update current FCF record "
2343 "(x%x) with new FCF record (x%x)\n",
2344 fcf_rec->fcf_indx,
2345 bf_get(lpfc_fcf_record_fcf_index,
2346 new_fcf_record));
2347 __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record,
2348 addr_mode, vlan_id, 0);
2349 /* Reset running random FCF selection count */
2350 phba->fcf.eligible_fcf_cnt = 1;
2351 } else if (new_fcf_record->fip_priority == fcf_rec->priority) {
2352 /* Update running random FCF selection count */
2353 phba->fcf.eligible_fcf_cnt++;
2354 select_new_fcf = lpfc_sli4_new_fcf_random_select(phba,
2355 phba->fcf.eligible_fcf_cnt);
2356 if (select_new_fcf) {
2357 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2358 "2839 Update current FCF record "
2359 "(x%x) with new FCF record (x%x)\n",
2360 fcf_rec->fcf_indx,
2361 bf_get(lpfc_fcf_record_fcf_index,
2362 new_fcf_record));
2363 /* Choose the new FCF by random selection */
2364 __lpfc_update_fcf_record(phba, fcf_rec,
2365 new_fcf_record,
2366 addr_mode, vlan_id, 0);
2369 spin_unlock_irq(&phba->hbalock);
2370 goto read_next_fcf;
2373 * This is the first suitable FCF record, choose this record for
2374 * initial best-fit FCF.
2376 if (fcf_rec) {
2377 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2378 "2840 Update initial FCF candidate "
2379 "with FCF (x%x)\n",
2380 bf_get(lpfc_fcf_record_fcf_index,
2381 new_fcf_record));
2382 __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record,
2383 addr_mode, vlan_id, (boot_flag ?
2384 BOOT_ENABLE : 0));
2385 phba->fcf.fcf_flag |= FCF_AVAILABLE;
2386 /* Setup initial running random FCF selection count */
2387 phba->fcf.eligible_fcf_cnt = 1;
2388 /* Seeding the random number generator for random selection */
2389 seed = (uint32_t)(0xFFFFFFFF & jiffies);
2390 prandom_seed(seed);
2392 spin_unlock_irq(&phba->hbalock);
2393 goto read_next_fcf;
2395 read_next_fcf:
2396 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2397 if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0) {
2398 if (phba->fcf.fcf_flag & FCF_REDISC_FOV) {
2400 * Case of FCF fast failover scan
2404 * It has not found any suitable FCF record, cancel
2405 * FCF scan inprogress, and do nothing
2407 if (!(phba->fcf.failover_rec.flag & RECORD_VALID)) {
2408 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
2409 "2782 No suitable FCF found: "
2410 "(x%x/x%x)\n",
2411 phba->fcoe_eventtag_at_fcf_scan,
2412 bf_get(lpfc_fcf_record_fcf_index,
2413 new_fcf_record));
2414 spin_lock_irq(&phba->hbalock);
2415 if (phba->hba_flag & HBA_DEVLOSS_TMO) {
2416 phba->hba_flag &= ~FCF_TS_INPROG;
2417 spin_unlock_irq(&phba->hbalock);
2418 /* Unregister in-use FCF and rescan */
2419 lpfc_printf_log(phba, KERN_INFO,
2420 LOG_FIP,
2421 "2864 On devloss tmo "
2422 "unreg in-use FCF and "
2423 "rescan FCF table\n");
2424 lpfc_unregister_fcf_rescan(phba);
2425 return;
2428 * Let next new FCF event trigger fast failover
2430 phba->hba_flag &= ~FCF_TS_INPROG;
2431 spin_unlock_irq(&phba->hbalock);
2432 return;
2435 * It has found a suitable FCF record that is not
2436 * the same as in-use FCF record, unregister the
2437 * in-use FCF record, replace the in-use FCF record
2438 * with the new FCF record, mark FCF fast failover
2439 * completed, and then start register the new FCF
2440 * record.
2443 /* Unregister the current in-use FCF record */
2444 lpfc_unregister_fcf(phba);
2446 /* Replace in-use record with the new record */
2447 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2448 "2842 Replace in-use FCF (x%x) "
2449 "with failover FCF (x%x)\n",
2450 phba->fcf.current_rec.fcf_indx,
2451 phba->fcf.failover_rec.fcf_indx);
2452 memcpy(&phba->fcf.current_rec,
2453 &phba->fcf.failover_rec,
2454 sizeof(struct lpfc_fcf_rec));
2456 * Mark the fast FCF failover rediscovery completed
2457 * and the start of the first round of the roundrobin
2458 * FCF failover.
2460 spin_lock_irq(&phba->hbalock);
2461 phba->fcf.fcf_flag &= ~FCF_REDISC_FOV;
2462 spin_unlock_irq(&phba->hbalock);
2463 /* Register to the new FCF record */
2464 lpfc_register_fcf(phba);
2465 } else {
2467 * In case of transaction period to fast FCF failover,
2468 * do nothing when search to the end of the FCF table.
2470 if ((phba->fcf.fcf_flag & FCF_REDISC_EVT) ||
2471 (phba->fcf.fcf_flag & FCF_REDISC_PEND))
2472 return;
2474 if (phba->cfg_fcf_failover_policy == LPFC_FCF_FOV &&
2475 phba->fcf.fcf_flag & FCF_IN_USE) {
2477 * In case the current in-use FCF record no
2478 * longer existed during FCF discovery that
2479 * was not triggered by fast FCF failover
2480 * process, treat it as fast FCF failover.
2482 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2483 "2841 In-use FCF record (x%x) "
2484 "not reported, entering fast "
2485 "FCF failover mode scanning.\n",
2486 phba->fcf.current_rec.fcf_indx);
2487 spin_lock_irq(&phba->hbalock);
2488 phba->fcf.fcf_flag |= FCF_REDISC_FOV;
2489 spin_unlock_irq(&phba->hbalock);
2490 lpfc_sli4_fcf_scan_read_fcf_rec(phba,
2491 LPFC_FCOE_FCF_GET_FIRST);
2492 return;
2494 /* Register to the new FCF record */
2495 lpfc_register_fcf(phba);
2497 } else
2498 lpfc_sli4_fcf_scan_read_fcf_rec(phba, next_fcf_index);
2499 return;
2501 out:
2502 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2503 lpfc_register_fcf(phba);
2505 return;
2509 * lpfc_mbx_cmpl_fcf_rr_read_fcf_rec - fcf roundrobin read_fcf mbox cmpl hdler
2510 * @phba: pointer to lpfc hba data structure.
2511 * @mboxq: pointer to mailbox object.
2513 * This is the callback function for FLOGI failure roundrobin FCF failover
2514 * read FCF record mailbox command from the eligible FCF record bmask for
2515 * performing the failover. If the FCF read back is not valid/available, it
2516 * fails through to retrying FLOGI to the currently registered FCF again.
2517 * Otherwise, if the FCF read back is valid and available, it will set the
2518 * newly read FCF record to the failover FCF record, unregister currently
2519 * registered FCF record, copy the failover FCF record to the current
2520 * FCF record, and then register the current FCF record before proceeding
2521 * to trying FLOGI on the new failover FCF.
2523 void
2524 lpfc_mbx_cmpl_fcf_rr_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
2526 struct fcf_record *new_fcf_record;
2527 uint32_t boot_flag, addr_mode;
2528 uint16_t next_fcf_index, fcf_index;
2529 uint16_t current_fcf_index;
2530 uint16_t vlan_id;
2531 int rc;
2533 /* If link state is not up, stop the roundrobin failover process */
2534 if (phba->link_state < LPFC_LINK_UP) {
2535 spin_lock_irq(&phba->hbalock);
2536 phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
2537 phba->hba_flag &= ~FCF_RR_INPROG;
2538 spin_unlock_irq(&phba->hbalock);
2539 goto out;
2542 /* Parse the FCF record from the non-embedded mailbox command */
2543 new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq,
2544 &next_fcf_index);
2545 if (!new_fcf_record) {
2546 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
2547 "2766 Mailbox command READ_FCF_RECORD "
2548 "failed to retrieve a FCF record.\n");
2549 goto error_out;
2552 /* Get the needed parameters from FCF record */
2553 rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag,
2554 &addr_mode, &vlan_id);
2556 /* Log the FCF record information if turned on */
2557 lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id,
2558 next_fcf_index);
2560 fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
2561 if (!rc) {
2562 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2563 "2848 Remove ineligible FCF (x%x) from "
2564 "from roundrobin bmask\n", fcf_index);
2565 /* Clear roundrobin bmask bit for ineligible FCF */
2566 lpfc_sli4_fcf_rr_index_clear(phba, fcf_index);
2567 /* Perform next round of roundrobin FCF failover */
2568 fcf_index = lpfc_sli4_fcf_rr_next_index_get(phba);
2569 rc = lpfc_sli4_fcf_rr_next_proc(phba->pport, fcf_index);
2570 if (rc)
2571 goto out;
2572 goto error_out;
2575 if (fcf_index == phba->fcf.current_rec.fcf_indx) {
2576 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2577 "2760 Perform FLOGI roundrobin FCF failover: "
2578 "FCF (x%x) back to FCF (x%x)\n",
2579 phba->fcf.current_rec.fcf_indx, fcf_index);
2580 /* Wait 500 ms before retrying FLOGI to current FCF */
2581 msleep(500);
2582 lpfc_issue_init_vfi(phba->pport);
2583 goto out;
2586 /* Upload new FCF record to the failover FCF record */
2587 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2588 "2834 Update current FCF (x%x) with new FCF (x%x)\n",
2589 phba->fcf.failover_rec.fcf_indx, fcf_index);
2590 spin_lock_irq(&phba->hbalock);
2591 __lpfc_update_fcf_record(phba, &phba->fcf.failover_rec,
2592 new_fcf_record, addr_mode, vlan_id,
2593 (boot_flag ? BOOT_ENABLE : 0));
2594 spin_unlock_irq(&phba->hbalock);
2596 current_fcf_index = phba->fcf.current_rec.fcf_indx;
2598 /* Unregister the current in-use FCF record */
2599 lpfc_unregister_fcf(phba);
2601 /* Replace in-use record with the new record */
2602 memcpy(&phba->fcf.current_rec, &phba->fcf.failover_rec,
2603 sizeof(struct lpfc_fcf_rec));
2605 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2606 "2783 Perform FLOGI roundrobin FCF failover: FCF "
2607 "(x%x) to FCF (x%x)\n", current_fcf_index, fcf_index);
2609 error_out:
2610 lpfc_register_fcf(phba);
2611 out:
2612 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2616 * lpfc_mbx_cmpl_read_fcf_rec - read fcf completion handler.
2617 * @phba: pointer to lpfc hba data structure.
2618 * @mboxq: pointer to mailbox object.
2620 * This is the callback function of read FCF record mailbox command for
2621 * updating the eligible FCF bmask for FLOGI failure roundrobin FCF
2622 * failover when a new FCF event happened. If the FCF read back is
2623 * valid/available and it passes the connection list check, it updates
2624 * the bmask for the eligible FCF record for roundrobin failover.
2626 void
2627 lpfc_mbx_cmpl_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
2629 struct fcf_record *new_fcf_record;
2630 uint32_t boot_flag, addr_mode;
2631 uint16_t fcf_index, next_fcf_index;
2632 uint16_t vlan_id;
2633 int rc;
2635 /* If link state is not up, no need to proceed */
2636 if (phba->link_state < LPFC_LINK_UP)
2637 goto out;
2639 /* If FCF discovery period is over, no need to proceed */
2640 if (!(phba->fcf.fcf_flag & FCF_DISCOVERY))
2641 goto out;
2643 /* Parse the FCF record from the non-embedded mailbox command */
2644 new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq,
2645 &next_fcf_index);
2646 if (!new_fcf_record) {
2647 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2648 "2767 Mailbox command READ_FCF_RECORD "
2649 "failed to retrieve a FCF record.\n");
2650 goto out;
2653 /* Check the connection list for eligibility */
2654 rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag,
2655 &addr_mode, &vlan_id);
2657 /* Log the FCF record information if turned on */
2658 lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id,
2659 next_fcf_index);
2661 if (!rc)
2662 goto out;
2664 /* Update the eligible FCF record index bmask */
2665 fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
2667 rc = lpfc_sli4_fcf_pri_list_add(phba, fcf_index, new_fcf_record);
2669 out:
2670 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2674 * lpfc_init_vfi_cmpl - Completion handler for init_vfi mbox command.
2675 * @phba: pointer to lpfc hba data structure.
2676 * @mboxq: pointer to mailbox data structure.
2678 * This function handles completion of init vfi mailbox command.
2680 void
2681 lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
2683 struct lpfc_vport *vport = mboxq->vport;
2686 * VFI not supported on interface type 0, just do the flogi
2687 * Also continue if the VFI is in use - just use the same one.
2689 if (mboxq->u.mb.mbxStatus &&
2690 (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
2691 LPFC_SLI_INTF_IF_TYPE_0) &&
2692 mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) {
2693 lpfc_printf_vlog(vport, KERN_ERR,
2694 LOG_MBOX,
2695 "2891 Init VFI mailbox failed 0x%x\n",
2696 mboxq->u.mb.mbxStatus);
2697 mempool_free(mboxq, phba->mbox_mem_pool);
2698 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
2699 return;
2702 lpfc_initial_flogi(vport);
2703 mempool_free(mboxq, phba->mbox_mem_pool);
2704 return;
2708 * lpfc_issue_init_vfi - Issue init_vfi mailbox command.
2709 * @vport: pointer to lpfc_vport data structure.
2711 * This function issue a init_vfi mailbox command to initialize the VFI and
2712 * VPI for the physical port.
2714 void
2715 lpfc_issue_init_vfi(struct lpfc_vport *vport)
2717 LPFC_MBOXQ_t *mboxq;
2718 int rc;
2719 struct lpfc_hba *phba = vport->phba;
2721 mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
2722 if (!mboxq) {
2723 lpfc_printf_vlog(vport, KERN_ERR,
2724 LOG_MBOX, "2892 Failed to allocate "
2725 "init_vfi mailbox\n");
2726 return;
2728 lpfc_init_vfi(mboxq, vport);
2729 mboxq->mbox_cmpl = lpfc_init_vfi_cmpl;
2730 rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
2731 if (rc == MBX_NOT_FINISHED) {
2732 lpfc_printf_vlog(vport, KERN_ERR,
2733 LOG_MBOX, "2893 Failed to issue init_vfi mailbox\n");
2734 mempool_free(mboxq, vport->phba->mbox_mem_pool);
2739 * lpfc_init_vpi_cmpl - Completion handler for init_vpi mbox command.
2740 * @phba: pointer to lpfc hba data structure.
2741 * @mboxq: pointer to mailbox data structure.
2743 * This function handles completion of init vpi mailbox command.
2745 void
2746 lpfc_init_vpi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
2748 struct lpfc_vport *vport = mboxq->vport;
2749 struct lpfc_nodelist *ndlp;
2750 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
2752 if (mboxq->u.mb.mbxStatus) {
2753 lpfc_printf_vlog(vport, KERN_ERR,
2754 LOG_MBOX,
2755 "2609 Init VPI mailbox failed 0x%x\n",
2756 mboxq->u.mb.mbxStatus);
2757 mempool_free(mboxq, phba->mbox_mem_pool);
2758 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
2759 return;
2761 spin_lock_irq(shost->host_lock);
2762 vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI;
2763 spin_unlock_irq(shost->host_lock);
2765 /* If this port is physical port or FDISC is done, do reg_vpi */
2766 if ((phba->pport == vport) || (vport->port_state == LPFC_FDISC)) {
2767 ndlp = lpfc_findnode_did(vport, Fabric_DID);
2768 if (!ndlp)
2769 lpfc_printf_vlog(vport, KERN_ERR,
2770 LOG_DISCOVERY,
2771 "2731 Cannot find fabric "
2772 "controller node\n");
2773 else
2774 lpfc_register_new_vport(phba, vport, ndlp);
2775 mempool_free(mboxq, phba->mbox_mem_pool);
2776 return;
2779 if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
2780 lpfc_initial_fdisc(vport);
2781 else {
2782 lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
2783 lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
2784 "2606 No NPIV Fabric support\n");
2786 mempool_free(mboxq, phba->mbox_mem_pool);
2787 return;
2791 * lpfc_issue_init_vpi - Issue init_vpi mailbox command.
2792 * @vport: pointer to lpfc_vport data structure.
2794 * This function issue a init_vpi mailbox command to initialize
2795 * VPI for the vport.
2797 void
2798 lpfc_issue_init_vpi(struct lpfc_vport *vport)
2800 LPFC_MBOXQ_t *mboxq;
2801 int rc, vpi;
2803 if ((vport->port_type != LPFC_PHYSICAL_PORT) && (!vport->vpi)) {
2804 vpi = lpfc_alloc_vpi(vport->phba);
2805 if (!vpi) {
2806 lpfc_printf_vlog(vport, KERN_ERR,
2807 LOG_MBOX,
2808 "3303 Failed to obtain vport vpi\n");
2809 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
2810 return;
2812 vport->vpi = vpi;
2815 mboxq = mempool_alloc(vport->phba->mbox_mem_pool, GFP_KERNEL);
2816 if (!mboxq) {
2817 lpfc_printf_vlog(vport, KERN_ERR,
2818 LOG_MBOX, "2607 Failed to allocate "
2819 "init_vpi mailbox\n");
2820 return;
2822 lpfc_init_vpi(vport->phba, mboxq, vport->vpi);
2823 mboxq->vport = vport;
2824 mboxq->mbox_cmpl = lpfc_init_vpi_cmpl;
2825 rc = lpfc_sli_issue_mbox(vport->phba, mboxq, MBX_NOWAIT);
2826 if (rc == MBX_NOT_FINISHED) {
2827 lpfc_printf_vlog(vport, KERN_ERR,
2828 LOG_MBOX, "2608 Failed to issue init_vpi mailbox\n");
2829 mempool_free(mboxq, vport->phba->mbox_mem_pool);
2834 * lpfc_start_fdiscs - send fdiscs for each vports on this port.
2835 * @phba: pointer to lpfc hba data structure.
2837 * This function loops through the list of vports on the @phba and issues an
2838 * FDISC if possible.
2840 void
2841 lpfc_start_fdiscs(struct lpfc_hba *phba)
2843 struct lpfc_vport **vports;
2844 int i;
2846 vports = lpfc_create_vport_work_array(phba);
2847 if (vports != NULL) {
2848 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
2849 if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
2850 continue;
2851 /* There are no vpi for this vport */
2852 if (vports[i]->vpi > phba->max_vpi) {
2853 lpfc_vport_set_state(vports[i],
2854 FC_VPORT_FAILED);
2855 continue;
2857 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
2858 lpfc_vport_set_state(vports[i],
2859 FC_VPORT_LINKDOWN);
2860 continue;
2862 if (vports[i]->fc_flag & FC_VPORT_NEEDS_INIT_VPI) {
2863 lpfc_issue_init_vpi(vports[i]);
2864 continue;
2866 if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
2867 lpfc_initial_fdisc(vports[i]);
2868 else {
2869 lpfc_vport_set_state(vports[i],
2870 FC_VPORT_NO_FABRIC_SUPP);
2871 lpfc_printf_vlog(vports[i], KERN_ERR,
2872 LOG_ELS,
2873 "0259 No NPIV "
2874 "Fabric support\n");
2878 lpfc_destroy_vport_work_array(phba, vports);
2881 void
2882 lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
2884 struct lpfc_dmabuf *dmabuf = mboxq->context1;
2885 struct lpfc_vport *vport = mboxq->vport;
2886 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
2889 * VFI not supported for interface type 0, so ignore any mailbox
2890 * error (except VFI in use) and continue with the discovery.
2892 if (mboxq->u.mb.mbxStatus &&
2893 (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
2894 LPFC_SLI_INTF_IF_TYPE_0) &&
2895 mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) {
2896 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
2897 "2018 REG_VFI mbxStatus error x%x "
2898 "HBA state x%x\n",
2899 mboxq->u.mb.mbxStatus, vport->port_state);
2900 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
2901 /* FLOGI failed, use loop map to make discovery list */
2902 lpfc_disc_list_loopmap(vport);
2903 /* Start discovery */
2904 lpfc_disc_start(vport);
2905 goto out_free_mem;
2907 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
2908 goto out_free_mem;
2911 /* If the VFI is already registered, there is nothing else to do
2912 * Unless this was a VFI update and we are in PT2PT mode, then
2913 * we should drop through to set the port state to ready.
2915 if (vport->fc_flag & FC_VFI_REGISTERED)
2916 if (!(phba->sli_rev == LPFC_SLI_REV4 &&
2917 vport->fc_flag & FC_PT2PT))
2918 goto out_free_mem;
2920 /* The VPI is implicitly registered when the VFI is registered */
2921 spin_lock_irq(shost->host_lock);
2922 vport->vpi_state |= LPFC_VPI_REGISTERED;
2923 vport->fc_flag |= FC_VFI_REGISTERED;
2924 vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
2925 vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI;
2926 spin_unlock_irq(shost->host_lock);
2928 /* In case SLI4 FC loopback test, we are ready */
2929 if ((phba->sli_rev == LPFC_SLI_REV4) &&
2930 (phba->link_flag & LS_LOOPBACK_MODE)) {
2931 phba->link_state = LPFC_HBA_READY;
2932 goto out_free_mem;
2935 lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI,
2936 "3313 cmpl reg vfi port_state:%x fc_flag:%x myDid:%x "
2937 "alpacnt:%d LinkState:%x topology:%x\n",
2938 vport->port_state, vport->fc_flag, vport->fc_myDID,
2939 vport->phba->alpa_map[0],
2940 phba->link_state, phba->fc_topology);
2942 if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
2944 * For private loop or for NPort pt2pt,
2945 * just start discovery and we are done.
2947 if ((vport->fc_flag & FC_PT2PT) ||
2948 ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
2949 !(vport->fc_flag & FC_PUBLIC_LOOP))) {
2951 /* Use loop map to make discovery list */
2952 lpfc_disc_list_loopmap(vport);
2953 /* Start discovery */
2954 if (vport->fc_flag & FC_PT2PT)
2955 vport->port_state = LPFC_VPORT_READY;
2956 else
2957 lpfc_disc_start(vport);
2958 } else {
2959 lpfc_start_fdiscs(phba);
2960 lpfc_do_scr_ns_plogi(phba, vport);
2964 out_free_mem:
2965 mempool_free(mboxq, phba->mbox_mem_pool);
2966 lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
2967 kfree(dmabuf);
2968 return;
2971 static void
2972 lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
2974 MAILBOX_t *mb = &pmb->u.mb;
2975 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) pmb->context1;
2976 struct lpfc_vport *vport = pmb->vport;
2979 /* Check for error */
2980 if (mb->mbxStatus) {
2981 /* READ_SPARAM mbox error <mbxStatus> state <hba_state> */
2982 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
2983 "0319 READ_SPARAM mbxStatus error x%x "
2984 "hba state x%x>\n",
2985 mb->mbxStatus, vport->port_state);
2986 lpfc_linkdown(phba);
2987 goto out;
2990 memcpy((uint8_t *) &vport->fc_sparam, (uint8_t *) mp->virt,
2991 sizeof (struct serv_parm));
2992 lpfc_update_vport_wwn(vport);
2993 if (vport->port_type == LPFC_PHYSICAL_PORT) {
2994 memcpy(&phba->wwnn, &vport->fc_nodename, sizeof(phba->wwnn));
2995 memcpy(&phba->wwpn, &vport->fc_portname, sizeof(phba->wwnn));
2998 lpfc_mbuf_free(phba, mp->virt, mp->phys);
2999 kfree(mp);
3000 mempool_free(pmb, phba->mbox_mem_pool);
3001 return;
3003 out:
3004 pmb->context1 = NULL;
3005 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3006 kfree(mp);
3007 lpfc_issue_clear_la(phba, vport);
3008 mempool_free(pmb, phba->mbox_mem_pool);
3009 return;
3012 static void
3013 lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
3015 struct lpfc_vport *vport = phba->pport;
3016 LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
3017 struct Scsi_Host *shost;
3018 int i;
3019 struct lpfc_dmabuf *mp;
3020 int rc;
3021 struct fcf_record *fcf_record;
3022 uint32_t fc_flags = 0;
3024 spin_lock_irq(&phba->hbalock);
3025 switch (bf_get(lpfc_mbx_read_top_link_spd, la)) {
3026 case LPFC_LINK_SPEED_1GHZ:
3027 case LPFC_LINK_SPEED_2GHZ:
3028 case LPFC_LINK_SPEED_4GHZ:
3029 case LPFC_LINK_SPEED_8GHZ:
3030 case LPFC_LINK_SPEED_10GHZ:
3031 case LPFC_LINK_SPEED_16GHZ:
3032 phba->fc_linkspeed = bf_get(lpfc_mbx_read_top_link_spd, la);
3033 break;
3034 default:
3035 phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN;
3036 break;
3039 if (phba->fc_topology &&
3040 phba->fc_topology != bf_get(lpfc_mbx_read_top_topology, la)) {
3041 lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
3042 "3314 Toplogy changed was 0x%x is 0x%x\n",
3043 phba->fc_topology,
3044 bf_get(lpfc_mbx_read_top_topology, la));
3045 phba->fc_topology_changed = 1;
3048 phba->fc_topology = bf_get(lpfc_mbx_read_top_topology, la);
3049 phba->link_flag &= ~LS_NPIV_FAB_SUPPORTED;
3051 shost = lpfc_shost_from_vport(vport);
3052 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
3053 phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
3055 /* if npiv is enabled and this adapter supports npiv log
3056 * a message that npiv is not supported in this topology
3058 if (phba->cfg_enable_npiv && phba->max_vpi)
3059 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3060 "1309 Link Up Event npiv not supported in loop "
3061 "topology\n");
3062 /* Get Loop Map information */
3063 if (bf_get(lpfc_mbx_read_top_il, la))
3064 fc_flags |= FC_LBIT;
3066 vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la);
3067 i = la->lilpBde64.tus.f.bdeSize;
3069 if (i == 0) {
3070 phba->alpa_map[0] = 0;
3071 } else {
3072 if (vport->cfg_log_verbose & LOG_LINK_EVENT) {
3073 int numalpa, j, k;
3074 union {
3075 uint8_t pamap[16];
3076 struct {
3077 uint32_t wd1;
3078 uint32_t wd2;
3079 uint32_t wd3;
3080 uint32_t wd4;
3081 } pa;
3082 } un;
3083 numalpa = phba->alpa_map[0];
3084 j = 0;
3085 while (j < numalpa) {
3086 memset(un.pamap, 0, 16);
3087 for (k = 1; j < numalpa; k++) {
3088 un.pamap[k - 1] =
3089 phba->alpa_map[j + 1];
3090 j++;
3091 if (k == 16)
3092 break;
3094 /* Link Up Event ALPA map */
3095 lpfc_printf_log(phba,
3096 KERN_WARNING,
3097 LOG_LINK_EVENT,
3098 "1304 Link Up Event "
3099 "ALPA map Data: x%x "
3100 "x%x x%x x%x\n",
3101 un.pa.wd1, un.pa.wd2,
3102 un.pa.wd3, un.pa.wd4);
3106 } else {
3107 if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) {
3108 if (phba->max_vpi && phba->cfg_enable_npiv &&
3109 (phba->sli_rev >= LPFC_SLI_REV3))
3110 phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
3112 vport->fc_myDID = phba->fc_pref_DID;
3113 fc_flags |= FC_LBIT;
3115 spin_unlock_irq(&phba->hbalock);
3117 if (fc_flags) {
3118 spin_lock_irq(shost->host_lock);
3119 vport->fc_flag |= fc_flags;
3120 spin_unlock_irq(shost->host_lock);
3123 lpfc_linkup(phba);
3124 sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
3125 if (!sparam_mbox)
3126 goto out;
3128 rc = lpfc_read_sparam(phba, sparam_mbox, 0);
3129 if (rc) {
3130 mempool_free(sparam_mbox, phba->mbox_mem_pool);
3131 goto out;
3133 sparam_mbox->vport = vport;
3134 sparam_mbox->mbox_cmpl = lpfc_mbx_cmpl_read_sparam;
3135 rc = lpfc_sli_issue_mbox(phba, sparam_mbox, MBX_NOWAIT);
3136 if (rc == MBX_NOT_FINISHED) {
3137 mp = (struct lpfc_dmabuf *) sparam_mbox->context1;
3138 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3139 kfree(mp);
3140 mempool_free(sparam_mbox, phba->mbox_mem_pool);
3141 goto out;
3144 if (!(phba->hba_flag & HBA_FCOE_MODE)) {
3145 cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
3146 if (!cfglink_mbox)
3147 goto out;
3148 vport->port_state = LPFC_LOCAL_CFG_LINK;
3149 lpfc_config_link(phba, cfglink_mbox);
3150 cfglink_mbox->vport = vport;
3151 cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link;
3152 rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT);
3153 if (rc == MBX_NOT_FINISHED) {
3154 mempool_free(cfglink_mbox, phba->mbox_mem_pool);
3155 goto out;
3157 } else {
3158 vport->port_state = LPFC_VPORT_UNKNOWN;
3160 * Add the driver's default FCF record at FCF index 0 now. This
3161 * is phase 1 implementation that support FCF index 0 and driver
3162 * defaults.
3164 if (!(phba->hba_flag & HBA_FIP_SUPPORT)) {
3165 fcf_record = kzalloc(sizeof(struct fcf_record),
3166 GFP_KERNEL);
3167 if (unlikely(!fcf_record)) {
3168 lpfc_printf_log(phba, KERN_ERR,
3169 LOG_MBOX | LOG_SLI,
3170 "2554 Could not allocate memory for "
3171 "fcf record\n");
3172 rc = -ENODEV;
3173 goto out;
3176 lpfc_sli4_build_dflt_fcf_record(phba, fcf_record,
3177 LPFC_FCOE_FCF_DEF_INDEX);
3178 rc = lpfc_sli4_add_fcf_record(phba, fcf_record);
3179 if (unlikely(rc)) {
3180 lpfc_printf_log(phba, KERN_ERR,
3181 LOG_MBOX | LOG_SLI,
3182 "2013 Could not manually add FCF "
3183 "record 0, status %d\n", rc);
3184 rc = -ENODEV;
3185 kfree(fcf_record);
3186 goto out;
3188 kfree(fcf_record);
3191 * The driver is expected to do FIP/FCF. Call the port
3192 * and get the FCF Table.
3194 spin_lock_irq(&phba->hbalock);
3195 if (phba->hba_flag & FCF_TS_INPROG) {
3196 spin_unlock_irq(&phba->hbalock);
3197 return;
3199 /* This is the initial FCF discovery scan */
3200 phba->fcf.fcf_flag |= FCF_INIT_DISC;
3201 spin_unlock_irq(&phba->hbalock);
3202 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
3203 "2778 Start FCF table scan at linkup\n");
3204 rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba,
3205 LPFC_FCOE_FCF_GET_FIRST);
3206 if (rc) {
3207 spin_lock_irq(&phba->hbalock);
3208 phba->fcf.fcf_flag &= ~FCF_INIT_DISC;
3209 spin_unlock_irq(&phba->hbalock);
3210 goto out;
3212 /* Reset FCF roundrobin bmask for new discovery */
3213 lpfc_sli4_clear_fcf_rr_bmask(phba);
3216 return;
3217 out:
3218 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
3219 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
3220 "0263 Discovery Mailbox error: state: 0x%x : %p %p\n",
3221 vport->port_state, sparam_mbox, cfglink_mbox);
3222 lpfc_issue_clear_la(phba, vport);
3223 return;
3226 static void
3227 lpfc_enable_la(struct lpfc_hba *phba)
3229 uint32_t control;
3230 struct lpfc_sli *psli = &phba->sli;
3231 spin_lock_irq(&phba->hbalock);
3232 psli->sli_flag |= LPFC_PROCESS_LA;
3233 if (phba->sli_rev <= LPFC_SLI_REV3) {
3234 control = readl(phba->HCregaddr);
3235 control |= HC_LAINT_ENA;
3236 writel(control, phba->HCregaddr);
3237 readl(phba->HCregaddr); /* flush */
3239 spin_unlock_irq(&phba->hbalock);
3242 static void
3243 lpfc_mbx_issue_link_down(struct lpfc_hba *phba)
3245 lpfc_linkdown(phba);
3246 lpfc_enable_la(phba);
3247 lpfc_unregister_unused_fcf(phba);
3248 /* turn on Link Attention interrupts - no CLEAR_LA needed */
3253 * This routine handles processing a READ_TOPOLOGY mailbox
3254 * command upon completion. It is setup in the LPFC_MBOXQ
3255 * as the completion routine when the command is
3256 * handed off to the SLI layer.
3258 void
3259 lpfc_mbx_cmpl_read_topology(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
3261 struct lpfc_vport *vport = pmb->vport;
3262 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3263 struct lpfc_mbx_read_top *la;
3264 MAILBOX_t *mb = &pmb->u.mb;
3265 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
3267 /* Unblock ELS traffic */
3268 phba->sli.ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT;
3269 /* Check for error */
3270 if (mb->mbxStatus) {
3271 lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
3272 "1307 READ_LA mbox error x%x state x%x\n",
3273 mb->mbxStatus, vport->port_state);
3274 lpfc_mbx_issue_link_down(phba);
3275 phba->link_state = LPFC_HBA_ERROR;
3276 goto lpfc_mbx_cmpl_read_topology_free_mbuf;
3279 la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop;
3281 memcpy(&phba->alpa_map[0], mp->virt, 128);
3283 spin_lock_irq(shost->host_lock);
3284 if (bf_get(lpfc_mbx_read_top_pb, la))
3285 vport->fc_flag |= FC_BYPASSED_MODE;
3286 else
3287 vport->fc_flag &= ~FC_BYPASSED_MODE;
3288 spin_unlock_irq(shost->host_lock);
3290 if (phba->fc_eventTag <= la->eventTag) {
3291 phba->fc_stat.LinkMultiEvent++;
3292 if (bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP)
3293 if (phba->fc_eventTag != 0)
3294 lpfc_linkdown(phba);
3297 phba->fc_eventTag = la->eventTag;
3298 if (phba->sli_rev < LPFC_SLI_REV4) {
3299 spin_lock_irq(&phba->hbalock);
3300 if (bf_get(lpfc_mbx_read_top_mm, la))
3301 phba->sli.sli_flag |= LPFC_MENLO_MAINT;
3302 else
3303 phba->sli.sli_flag &= ~LPFC_MENLO_MAINT;
3304 spin_unlock_irq(&phba->hbalock);
3307 phba->link_events++;
3308 if ((bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP) &&
3309 !(phba->sli.sli_flag & LPFC_MENLO_MAINT)) {
3310 phba->fc_stat.LinkUp++;
3311 if (phba->link_flag & LS_LOOPBACK_MODE) {
3312 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3313 "1306 Link Up Event in loop back mode "
3314 "x%x received Data: x%x x%x x%x x%x\n",
3315 la->eventTag, phba->fc_eventTag,
3316 bf_get(lpfc_mbx_read_top_alpa_granted,
3317 la),
3318 bf_get(lpfc_mbx_read_top_link_spd, la),
3319 phba->alpa_map[0]);
3320 } else {
3321 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3322 "1303 Link Up Event x%x received "
3323 "Data: x%x x%x x%x x%x x%x x%x %d\n",
3324 la->eventTag, phba->fc_eventTag,
3325 bf_get(lpfc_mbx_read_top_alpa_granted,
3326 la),
3327 bf_get(lpfc_mbx_read_top_link_spd, la),
3328 phba->alpa_map[0],
3329 bf_get(lpfc_mbx_read_top_mm, la),
3330 bf_get(lpfc_mbx_read_top_fa, la),
3331 phba->wait_4_mlo_maint_flg);
3333 lpfc_mbx_process_link_up(phba, la);
3334 } else if (bf_get(lpfc_mbx_read_top_att_type, la) ==
3335 LPFC_ATT_LINK_DOWN) {
3336 phba->fc_stat.LinkDown++;
3337 if (phba->link_flag & LS_LOOPBACK_MODE)
3338 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3339 "1308 Link Down Event in loop back mode "
3340 "x%x received "
3341 "Data: x%x x%x x%x\n",
3342 la->eventTag, phba->fc_eventTag,
3343 phba->pport->port_state, vport->fc_flag);
3344 else
3345 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3346 "1305 Link Down Event x%x received "
3347 "Data: x%x x%x x%x x%x x%x\n",
3348 la->eventTag, phba->fc_eventTag,
3349 phba->pport->port_state, vport->fc_flag,
3350 bf_get(lpfc_mbx_read_top_mm, la),
3351 bf_get(lpfc_mbx_read_top_fa, la));
3352 lpfc_mbx_issue_link_down(phba);
3354 if ((phba->sli.sli_flag & LPFC_MENLO_MAINT) &&
3355 ((bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP))) {
3356 if (phba->link_state != LPFC_LINK_DOWN) {
3357 phba->fc_stat.LinkDown++;
3358 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3359 "1312 Link Down Event x%x received "
3360 "Data: x%x x%x x%x\n",
3361 la->eventTag, phba->fc_eventTag,
3362 phba->pport->port_state, vport->fc_flag);
3363 lpfc_mbx_issue_link_down(phba);
3364 } else
3365 lpfc_enable_la(phba);
3367 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3368 "1310 Menlo Maint Mode Link up Event x%x rcvd "
3369 "Data: x%x x%x x%x\n",
3370 la->eventTag, phba->fc_eventTag,
3371 phba->pport->port_state, vport->fc_flag);
3373 * The cmnd that triggered this will be waiting for this
3374 * signal.
3376 /* WAKEUP for MENLO_SET_MODE or MENLO_RESET command. */
3377 if (phba->wait_4_mlo_maint_flg) {
3378 phba->wait_4_mlo_maint_flg = 0;
3379 wake_up_interruptible(&phba->wait_4_mlo_m_q);
3383 if ((phba->sli_rev < LPFC_SLI_REV4) &&
3384 bf_get(lpfc_mbx_read_top_fa, la)) {
3385 if (phba->sli.sli_flag & LPFC_MENLO_MAINT)
3386 lpfc_issue_clear_la(phba, vport);
3387 lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
3388 "1311 fa %d\n",
3389 bf_get(lpfc_mbx_read_top_fa, la));
3392 lpfc_mbx_cmpl_read_topology_free_mbuf:
3393 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3394 kfree(mp);
3395 mempool_free(pmb, phba->mbox_mem_pool);
3396 return;
3400 * This routine handles processing a REG_LOGIN mailbox
3401 * command upon completion. It is setup in the LPFC_MBOXQ
3402 * as the completion routine when the command is
3403 * handed off to the SLI layer.
3405 void
3406 lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
3408 struct lpfc_vport *vport = pmb->vport;
3409 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
3410 struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
3411 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3413 pmb->context1 = NULL;
3414 pmb->context2 = NULL;
3416 if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND)
3417 ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND;
3419 if (ndlp->nlp_flag & NLP_IGNR_REG_CMPL ||
3420 ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) {
3421 /* We rcvd a rscn after issuing this
3422 * mbox reg login, we may have cycled
3423 * back through the state and be
3424 * back at reg login state so this
3425 * mbox needs to be ignored becase
3426 * there is another reg login in
3427 * process.
3429 spin_lock_irq(shost->host_lock);
3430 ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
3431 spin_unlock_irq(shost->host_lock);
3432 } else
3433 /* Good status, call state machine */
3434 lpfc_disc_state_machine(vport, ndlp, pmb,
3435 NLP_EVT_CMPL_REG_LOGIN);
3437 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3438 kfree(mp);
3439 mempool_free(pmb, phba->mbox_mem_pool);
3440 /* decrement the node reference count held for this callback
3441 * function.
3443 lpfc_nlp_put(ndlp);
3445 return;
3448 static void
3449 lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
3451 MAILBOX_t *mb = &pmb->u.mb;
3452 struct lpfc_vport *vport = pmb->vport;
3453 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3455 switch (mb->mbxStatus) {
3456 case 0x0011:
3457 case 0x0020:
3458 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
3459 "0911 cmpl_unreg_vpi, mb status = 0x%x\n",
3460 mb->mbxStatus);
3461 break;
3462 /* If VPI is busy, reset the HBA */
3463 case 0x9700:
3464 lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE,
3465 "2798 Unreg_vpi failed vpi 0x%x, mb status = 0x%x\n",
3466 vport->vpi, mb->mbxStatus);
3467 if (!(phba->pport->load_flag & FC_UNLOADING))
3468 lpfc_workq_post_event(phba, NULL, NULL,
3469 LPFC_EVT_RESET_HBA);
3471 spin_lock_irq(shost->host_lock);
3472 vport->vpi_state &= ~LPFC_VPI_REGISTERED;
3473 vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
3474 spin_unlock_irq(shost->host_lock);
3475 vport->unreg_vpi_cmpl = VPORT_OK;
3476 mempool_free(pmb, phba->mbox_mem_pool);
3477 lpfc_cleanup_vports_rrqs(vport, NULL);
3479 * This shost reference might have been taken at the beginning of
3480 * lpfc_vport_delete()
3482 if ((vport->load_flag & FC_UNLOADING) && (vport != phba->pport))
3483 scsi_host_put(shost);
3487 lpfc_mbx_unreg_vpi(struct lpfc_vport *vport)
3489 struct lpfc_hba *phba = vport->phba;
3490 LPFC_MBOXQ_t *mbox;
3491 int rc;
3493 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
3494 if (!mbox)
3495 return 1;
3497 lpfc_unreg_vpi(phba, vport->vpi, mbox);
3498 mbox->vport = vport;
3499 mbox->mbox_cmpl = lpfc_mbx_cmpl_unreg_vpi;
3500 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
3501 if (rc == MBX_NOT_FINISHED) {
3502 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
3503 "1800 Could not issue unreg_vpi\n");
3504 mempool_free(mbox, phba->mbox_mem_pool);
3505 vport->unreg_vpi_cmpl = VPORT_ERROR;
3506 return rc;
3508 return 0;
3511 static void
3512 lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
3514 struct lpfc_vport *vport = pmb->vport;
3515 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3516 MAILBOX_t *mb = &pmb->u.mb;
3518 switch (mb->mbxStatus) {
3519 case 0x0011:
3520 case 0x9601:
3521 case 0x9602:
3522 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
3523 "0912 cmpl_reg_vpi, mb status = 0x%x\n",
3524 mb->mbxStatus);
3525 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
3526 spin_lock_irq(shost->host_lock);
3527 vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
3528 spin_unlock_irq(shost->host_lock);
3529 vport->fc_myDID = 0;
3530 goto out;
3533 spin_lock_irq(shost->host_lock);
3534 vport->vpi_state |= LPFC_VPI_REGISTERED;
3535 vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
3536 spin_unlock_irq(shost->host_lock);
3537 vport->num_disc_nodes = 0;
3538 /* go thru NPR list and issue ELS PLOGIs */
3539 if (vport->fc_npr_cnt)
3540 lpfc_els_disc_plogi(vport);
3542 if (!vport->num_disc_nodes) {
3543 spin_lock_irq(shost->host_lock);
3544 vport->fc_flag &= ~FC_NDISC_ACTIVE;
3545 spin_unlock_irq(shost->host_lock);
3546 lpfc_can_disctmo(vport);
3548 vport->port_state = LPFC_VPORT_READY;
3550 out:
3551 mempool_free(pmb, phba->mbox_mem_pool);
3552 return;
3556 * lpfc_create_static_vport - Read HBA config region to create static vports.
3557 * @phba: pointer to lpfc hba data structure.
3559 * This routine issue a DUMP mailbox command for config region 22 to get
3560 * the list of static vports to be created. The function create vports
3561 * based on the information returned from the HBA.
3563 void
3564 lpfc_create_static_vport(struct lpfc_hba *phba)
3566 LPFC_MBOXQ_t *pmb = NULL;
3567 MAILBOX_t *mb;
3568 struct static_vport_info *vport_info;
3569 int mbx_wait_rc = 0, i;
3570 struct fc_vport_identifiers vport_id;
3571 struct fc_vport *new_fc_vport;
3572 struct Scsi_Host *shost;
3573 struct lpfc_vport *vport;
3574 uint16_t offset = 0;
3575 uint8_t *vport_buff;
3576 struct lpfc_dmabuf *mp;
3577 uint32_t byte_count = 0;
3579 pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
3580 if (!pmb) {
3581 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3582 "0542 lpfc_create_static_vport failed to"
3583 " allocate mailbox memory\n");
3584 return;
3586 memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
3587 mb = &pmb->u.mb;
3589 vport_info = kzalloc(sizeof(struct static_vport_info), GFP_KERNEL);
3590 if (!vport_info) {
3591 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3592 "0543 lpfc_create_static_vport failed to"
3593 " allocate vport_info\n");
3594 mempool_free(pmb, phba->mbox_mem_pool);
3595 return;
3598 vport_buff = (uint8_t *) vport_info;
3599 do {
3600 /* free dma buffer from previous round */
3601 if (pmb->context1) {
3602 mp = (struct lpfc_dmabuf *)pmb->context1;
3603 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3604 kfree(mp);
3606 if (lpfc_dump_static_vport(phba, pmb, offset))
3607 goto out;
3609 pmb->vport = phba->pport;
3610 mbx_wait_rc = lpfc_sli_issue_mbox_wait(phba, pmb,
3611 LPFC_MBOX_TMO);
3613 if ((mbx_wait_rc != MBX_SUCCESS) || mb->mbxStatus) {
3614 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
3615 "0544 lpfc_create_static_vport failed to"
3616 " issue dump mailbox command ret 0x%x "
3617 "status 0x%x\n",
3618 mbx_wait_rc, mb->mbxStatus);
3619 goto out;
3622 if (phba->sli_rev == LPFC_SLI_REV4) {
3623 byte_count = pmb->u.mqe.un.mb_words[5];
3624 mp = (struct lpfc_dmabuf *)pmb->context1;
3625 if (byte_count > sizeof(struct static_vport_info) -
3626 offset)
3627 byte_count = sizeof(struct static_vport_info)
3628 - offset;
3629 memcpy(vport_buff + offset, mp->virt, byte_count);
3630 offset += byte_count;
3631 } else {
3632 if (mb->un.varDmp.word_cnt >
3633 sizeof(struct static_vport_info) - offset)
3634 mb->un.varDmp.word_cnt =
3635 sizeof(struct static_vport_info)
3636 - offset;
3637 byte_count = mb->un.varDmp.word_cnt;
3638 lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
3639 vport_buff + offset,
3640 byte_count);
3642 offset += byte_count;
3645 } while (byte_count &&
3646 offset < sizeof(struct static_vport_info));
3649 if ((le32_to_cpu(vport_info->signature) != VPORT_INFO_SIG) ||
3650 ((le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK)
3651 != VPORT_INFO_REV)) {
3652 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3653 "0545 lpfc_create_static_vport bad"
3654 " information header 0x%x 0x%x\n",
3655 le32_to_cpu(vport_info->signature),
3656 le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK);
3658 goto out;
3661 shost = lpfc_shost_from_vport(phba->pport);
3663 for (i = 0; i < MAX_STATIC_VPORT_COUNT; i++) {
3664 memset(&vport_id, 0, sizeof(vport_id));
3665 vport_id.port_name = wwn_to_u64(vport_info->vport_list[i].wwpn);
3666 vport_id.node_name = wwn_to_u64(vport_info->vport_list[i].wwnn);
3667 if (!vport_id.port_name || !vport_id.node_name)
3668 continue;
3670 vport_id.roles = FC_PORT_ROLE_FCP_INITIATOR;
3671 vport_id.vport_type = FC_PORTTYPE_NPIV;
3672 vport_id.disable = false;
3673 new_fc_vport = fc_vport_create(shost, 0, &vport_id);
3675 if (!new_fc_vport) {
3676 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
3677 "0546 lpfc_create_static_vport failed to"
3678 " create vport\n");
3679 continue;
3682 vport = *(struct lpfc_vport **)new_fc_vport->dd_data;
3683 vport->vport_flag |= STATIC_VPORT;
3686 out:
3687 kfree(vport_info);
3688 if (mbx_wait_rc != MBX_TIMEOUT) {
3689 if (pmb->context1) {
3690 mp = (struct lpfc_dmabuf *)pmb->context1;
3691 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3692 kfree(mp);
3694 mempool_free(pmb, phba->mbox_mem_pool);
3697 return;
3701 * This routine handles processing a Fabric REG_LOGIN mailbox
3702 * command upon completion. It is setup in the LPFC_MBOXQ
3703 * as the completion routine when the command is
3704 * handed off to the SLI layer.
3706 void
3707 lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
3709 struct lpfc_vport *vport = pmb->vport;
3710 MAILBOX_t *mb = &pmb->u.mb;
3711 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
3712 struct lpfc_nodelist *ndlp;
3713 struct Scsi_Host *shost;
3715 ndlp = (struct lpfc_nodelist *) pmb->context2;
3716 pmb->context1 = NULL;
3717 pmb->context2 = NULL;
3719 if (mb->mbxStatus) {
3720 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
3721 "0258 Register Fabric login error: 0x%x\n",
3722 mb->mbxStatus);
3723 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3724 kfree(mp);
3725 mempool_free(pmb, phba->mbox_mem_pool);
3727 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
3728 /* FLOGI failed, use loop map to make discovery list */
3729 lpfc_disc_list_loopmap(vport);
3731 /* Start discovery */
3732 lpfc_disc_start(vport);
3733 /* Decrement the reference count to ndlp after the
3734 * reference to the ndlp are done.
3736 lpfc_nlp_put(ndlp);
3737 return;
3740 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
3741 /* Decrement the reference count to ndlp after the reference
3742 * to the ndlp are done.
3744 lpfc_nlp_put(ndlp);
3745 return;
3748 if (phba->sli_rev < LPFC_SLI_REV4)
3749 ndlp->nlp_rpi = mb->un.varWords[0];
3750 ndlp->nlp_flag |= NLP_RPI_REGISTERED;
3751 ndlp->nlp_type |= NLP_FABRIC;
3752 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
3754 if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
3755 /* when physical port receive logo donot start
3756 * vport discovery */
3757 if (!(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG))
3758 lpfc_start_fdiscs(phba);
3759 else {
3760 shost = lpfc_shost_from_vport(vport);
3761 spin_lock_irq(shost->host_lock);
3762 vport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG ;
3763 spin_unlock_irq(shost->host_lock);
3765 lpfc_do_scr_ns_plogi(phba, vport);
3768 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3769 kfree(mp);
3770 mempool_free(pmb, phba->mbox_mem_pool);
3772 /* Drop the reference count from the mbox at the end after
3773 * all the current reference to the ndlp have been done.
3775 lpfc_nlp_put(ndlp);
3776 return;
3780 * This routine handles processing a NameServer REG_LOGIN mailbox
3781 * command upon completion. It is setup in the LPFC_MBOXQ
3782 * as the completion routine when the command is
3783 * handed off to the SLI layer.
3785 void
3786 lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
3788 MAILBOX_t *mb = &pmb->u.mb;
3789 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
3790 struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
3791 struct lpfc_vport *vport = pmb->vport;
3793 pmb->context1 = NULL;
3794 pmb->context2 = NULL;
3796 if (mb->mbxStatus) {
3797 out:
3798 lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
3799 "0260 Register NameServer error: 0x%x\n",
3800 mb->mbxStatus);
3801 /* decrement the node reference count held for this
3802 * callback function.
3804 lpfc_nlp_put(ndlp);
3805 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3806 kfree(mp);
3807 mempool_free(pmb, phba->mbox_mem_pool);
3809 /* If no other thread is using the ndlp, free it */
3810 lpfc_nlp_not_used(ndlp);
3812 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
3814 * RegLogin failed, use loop map to make discovery
3815 * list
3817 lpfc_disc_list_loopmap(vport);
3819 /* Start discovery */
3820 lpfc_disc_start(vport);
3821 return;
3823 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
3824 return;
3827 if (phba->sli_rev < LPFC_SLI_REV4)
3828 ndlp->nlp_rpi = mb->un.varWords[0];
3829 ndlp->nlp_flag |= NLP_RPI_REGISTERED;
3830 ndlp->nlp_type |= NLP_FABRIC;
3831 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
3833 if (vport->port_state < LPFC_VPORT_READY) {
3834 /* Link up discovery requires Fabric registration. */
3835 lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0, 0); /* Do this first! */
3836 lpfc_ns_cmd(vport, SLI_CTNS_RNN_ID, 0, 0);
3837 lpfc_ns_cmd(vport, SLI_CTNS_RSNN_NN, 0, 0);
3838 lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0);
3839 lpfc_ns_cmd(vport, SLI_CTNS_RFT_ID, 0, 0);
3841 /* Issue SCR just before NameServer GID_FT Query */
3842 lpfc_issue_els_scr(vport, SCR_DID, 0);
3845 vport->fc_ns_retry = 0;
3846 /* Good status, issue CT Request to NameServer */
3847 if (lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, 0, 0)) {
3848 /* Cannot issue NameServer Query, so finish up discovery */
3849 goto out;
3852 /* decrement the node reference count held for this
3853 * callback function.
3855 lpfc_nlp_put(ndlp);
3856 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3857 kfree(mp);
3858 mempool_free(pmb, phba->mbox_mem_pool);
3860 return;
3863 static void
3864 lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
3866 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3867 struct fc_rport *rport;
3868 struct lpfc_rport_data *rdata;
3869 struct fc_rport_identifiers rport_ids;
3870 struct lpfc_hba *phba = vport->phba;
3872 /* Remote port has reappeared. Re-register w/ FC transport */
3873 rport_ids.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn);
3874 rport_ids.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn);
3875 rport_ids.port_id = ndlp->nlp_DID;
3876 rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
3879 * We leave our node pointer in rport->dd_data when we unregister a
3880 * FCP target port. But fc_remote_port_add zeros the space to which
3881 * rport->dd_data points. So, if we're reusing a previously
3882 * registered port, drop the reference that we took the last time we
3883 * registered the port.
3885 if (ndlp->rport && ndlp->rport->dd_data &&
3886 ((struct lpfc_rport_data *) ndlp->rport->dd_data)->pnode == ndlp)
3887 lpfc_nlp_put(ndlp);
3889 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT,
3890 "rport add: did:x%x flg:x%x type x%x",
3891 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
3893 /* Don't add the remote port if unloading. */
3894 if (vport->load_flag & FC_UNLOADING)
3895 return;
3897 ndlp->rport = rport = fc_remote_port_add(shost, 0, &rport_ids);
3898 if (!rport || !get_device(&rport->dev)) {
3899 dev_printk(KERN_WARNING, &phba->pcidev->dev,
3900 "Warning: fc_remote_port_add failed\n");
3901 return;
3904 /* initialize static port data */
3905 rport->maxframe_size = ndlp->nlp_maxframe;
3906 rport->supported_classes = ndlp->nlp_class_sup;
3907 rdata = rport->dd_data;
3908 rdata->pnode = lpfc_nlp_get(ndlp);
3910 if (ndlp->nlp_type & NLP_FCP_TARGET)
3911 rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
3912 if (ndlp->nlp_type & NLP_FCP_INITIATOR)
3913 rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
3915 if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN)
3916 fc_remote_port_rolechg(rport, rport_ids.roles);
3918 lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
3919 "3183 rport register x%06x, rport %p role x%x\n",
3920 ndlp->nlp_DID, rport, rport_ids.roles);
3922 if ((rport->scsi_target_id != -1) &&
3923 (rport->scsi_target_id < LPFC_MAX_TARGET)) {
3924 ndlp->nlp_sid = rport->scsi_target_id;
3926 return;
3929 static void
3930 lpfc_unregister_remote_port(struct lpfc_nodelist *ndlp)
3932 struct fc_rport *rport = ndlp->rport;
3934 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT,
3935 "rport delete: did:x%x flg:x%x type x%x",
3936 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
3938 lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
3939 "3184 rport unregister x%06x, rport %p\n",
3940 ndlp->nlp_DID, rport);
3942 fc_remote_port_delete(rport);
3944 return;
3947 static void
3948 lpfc_nlp_counters(struct lpfc_vport *vport, int state, int count)
3950 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3952 spin_lock_irq(shost->host_lock);
3953 switch (state) {
3954 case NLP_STE_UNUSED_NODE:
3955 vport->fc_unused_cnt += count;
3956 break;
3957 case NLP_STE_PLOGI_ISSUE:
3958 vport->fc_plogi_cnt += count;
3959 break;
3960 case NLP_STE_ADISC_ISSUE:
3961 vport->fc_adisc_cnt += count;
3962 break;
3963 case NLP_STE_REG_LOGIN_ISSUE:
3964 vport->fc_reglogin_cnt += count;
3965 break;
3966 case NLP_STE_PRLI_ISSUE:
3967 vport->fc_prli_cnt += count;
3968 break;
3969 case NLP_STE_UNMAPPED_NODE:
3970 vport->fc_unmap_cnt += count;
3971 break;
3972 case NLP_STE_MAPPED_NODE:
3973 vport->fc_map_cnt += count;
3974 break;
3975 case NLP_STE_NPR_NODE:
3976 vport->fc_npr_cnt += count;
3977 break;
3979 spin_unlock_irq(shost->host_lock);
3982 static void
3983 lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
3984 int old_state, int new_state)
3986 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3988 if (new_state == NLP_STE_UNMAPPED_NODE) {
3989 ndlp->nlp_flag &= ~NLP_NODEV_REMOVE;
3990 ndlp->nlp_type |= NLP_FC_NODE;
3992 if (new_state == NLP_STE_MAPPED_NODE)
3993 ndlp->nlp_flag &= ~NLP_NODEV_REMOVE;
3994 if (new_state == NLP_STE_NPR_NODE)
3995 ndlp->nlp_flag &= ~NLP_RCV_PLOGI;
3997 /* Transport interface */
3998 if (ndlp->rport && (old_state == NLP_STE_MAPPED_NODE ||
3999 old_state == NLP_STE_UNMAPPED_NODE)) {
4000 vport->phba->nport_event_cnt++;
4001 lpfc_unregister_remote_port(ndlp);
4004 if (new_state == NLP_STE_MAPPED_NODE ||
4005 new_state == NLP_STE_UNMAPPED_NODE) {
4006 vport->phba->nport_event_cnt++;
4008 * Tell the fc transport about the port, if we haven't
4009 * already. If we have, and it's a scsi entity, be
4010 * sure to unblock any attached scsi devices
4012 lpfc_register_remote_port(vport, ndlp);
4014 if ((new_state == NLP_STE_MAPPED_NODE) &&
4015 (vport->stat_data_enabled)) {
4017 * A new target is discovered, if there is no buffer for
4018 * statistical data collection allocate buffer.
4020 ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT,
4021 sizeof(struct lpfc_scsicmd_bkt),
4022 GFP_KERNEL);
4024 if (!ndlp->lat_data)
4025 lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE,
4026 "0286 lpfc_nlp_state_cleanup failed to "
4027 "allocate statistical data buffer DID "
4028 "0x%x\n", ndlp->nlp_DID);
4031 * if we added to Mapped list, but the remote port
4032 * registration failed or assigned a target id outside
4033 * our presentable range - move the node to the
4034 * Unmapped List
4036 if (new_state == NLP_STE_MAPPED_NODE &&
4037 (!ndlp->rport ||
4038 ndlp->rport->scsi_target_id == -1 ||
4039 ndlp->rport->scsi_target_id >= LPFC_MAX_TARGET)) {
4040 spin_lock_irq(shost->host_lock);
4041 ndlp->nlp_flag |= NLP_TGT_NO_SCSIID;
4042 spin_unlock_irq(shost->host_lock);
4043 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
4047 static char *
4048 lpfc_nlp_state_name(char *buffer, size_t size, int state)
4050 static char *states[] = {
4051 [NLP_STE_UNUSED_NODE] = "UNUSED",
4052 [NLP_STE_PLOGI_ISSUE] = "PLOGI",
4053 [NLP_STE_ADISC_ISSUE] = "ADISC",
4054 [NLP_STE_REG_LOGIN_ISSUE] = "REGLOGIN",
4055 [NLP_STE_PRLI_ISSUE] = "PRLI",
4056 [NLP_STE_LOGO_ISSUE] = "LOGO",
4057 [NLP_STE_UNMAPPED_NODE] = "UNMAPPED",
4058 [NLP_STE_MAPPED_NODE] = "MAPPED",
4059 [NLP_STE_NPR_NODE] = "NPR",
4062 if (state < NLP_STE_MAX_STATE && states[state])
4063 strlcpy(buffer, states[state], size);
4064 else
4065 snprintf(buffer, size, "unknown (%d)", state);
4066 return buffer;
4069 void
4070 lpfc_nlp_set_state(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
4071 int state)
4073 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4074 int old_state = ndlp->nlp_state;
4075 char name1[16], name2[16];
4077 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
4078 "0904 NPort state transition x%06x, %s -> %s\n",
4079 ndlp->nlp_DID,
4080 lpfc_nlp_state_name(name1, sizeof(name1), old_state),
4081 lpfc_nlp_state_name(name2, sizeof(name2), state));
4083 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE,
4084 "node statechg did:x%x old:%d ste:%d",
4085 ndlp->nlp_DID, old_state, state);
4087 if (old_state == NLP_STE_NPR_NODE &&
4088 state != NLP_STE_NPR_NODE)
4089 lpfc_cancel_retry_delay_tmo(vport, ndlp);
4090 if (old_state == NLP_STE_UNMAPPED_NODE) {
4091 ndlp->nlp_flag &= ~NLP_TGT_NO_SCSIID;
4092 ndlp->nlp_type &= ~NLP_FC_NODE;
4095 if (list_empty(&ndlp->nlp_listp)) {
4096 spin_lock_irq(shost->host_lock);
4097 list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes);
4098 spin_unlock_irq(shost->host_lock);
4099 } else if (old_state)
4100 lpfc_nlp_counters(vport, old_state, -1);
4102 ndlp->nlp_state = state;
4103 lpfc_nlp_counters(vport, state, 1);
4104 lpfc_nlp_state_cleanup(vport, ndlp, old_state, state);
4107 void
4108 lpfc_enqueue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4110 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4112 if (list_empty(&ndlp->nlp_listp)) {
4113 spin_lock_irq(shost->host_lock);
4114 list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes);
4115 spin_unlock_irq(shost->host_lock);
4119 void
4120 lpfc_dequeue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4122 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4124 lpfc_cancel_retry_delay_tmo(vport, ndlp);
4125 if (ndlp->nlp_state && !list_empty(&ndlp->nlp_listp))
4126 lpfc_nlp_counters(vport, ndlp->nlp_state, -1);
4127 spin_lock_irq(shost->host_lock);
4128 list_del_init(&ndlp->nlp_listp);
4129 spin_unlock_irq(shost->host_lock);
4130 lpfc_nlp_state_cleanup(vport, ndlp, ndlp->nlp_state,
4131 NLP_STE_UNUSED_NODE);
4134 static void
4135 lpfc_disable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4137 lpfc_cancel_retry_delay_tmo(vport, ndlp);
4138 if (ndlp->nlp_state && !list_empty(&ndlp->nlp_listp))
4139 lpfc_nlp_counters(vport, ndlp->nlp_state, -1);
4140 lpfc_nlp_state_cleanup(vport, ndlp, ndlp->nlp_state,
4141 NLP_STE_UNUSED_NODE);
4144 * lpfc_initialize_node - Initialize all fields of node object
4145 * @vport: Pointer to Virtual Port object.
4146 * @ndlp: Pointer to FC node object.
4147 * @did: FC_ID of the node.
4149 * This function is always called when node object need to be initialized.
4150 * It initializes all the fields of the node object. Although the reference
4151 * to phba from @ndlp can be obtained indirectly through it's reference to
4152 * @vport, a direct reference to phba is taken here by @ndlp. This is due
4153 * to the life-span of the @ndlp might go beyond the existence of @vport as
4154 * the final release of ndlp is determined by its reference count. And, the
4155 * operation on @ndlp needs the reference to phba.
4157 static inline void
4158 lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
4159 uint32_t did)
4161 INIT_LIST_HEAD(&ndlp->els_retry_evt.evt_listp);
4162 INIT_LIST_HEAD(&ndlp->dev_loss_evt.evt_listp);
4163 init_timer(&ndlp->nlp_delayfunc);
4164 ndlp->nlp_delayfunc.function = lpfc_els_retry_delay;
4165 ndlp->nlp_delayfunc.data = (unsigned long)ndlp;
4166 ndlp->nlp_DID = did;
4167 ndlp->vport = vport;
4168 ndlp->phba = vport->phba;
4169 ndlp->nlp_sid = NLP_NO_SID;
4170 kref_init(&ndlp->kref);
4171 NLP_INT_NODE_ACT(ndlp);
4172 atomic_set(&ndlp->cmd_pending, 0);
4173 ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth;
4176 struct lpfc_nodelist *
4177 lpfc_enable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
4178 int state)
4180 struct lpfc_hba *phba = vport->phba;
4181 uint32_t did;
4182 unsigned long flags;
4184 if (!ndlp)
4185 return NULL;
4187 spin_lock_irqsave(&phba->ndlp_lock, flags);
4188 /* The ndlp should not be in memory free mode */
4189 if (NLP_CHK_FREE_REQ(ndlp)) {
4190 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
4191 lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
4192 "0277 lpfc_enable_node: ndlp:x%p "
4193 "usgmap:x%x refcnt:%d\n",
4194 (void *)ndlp, ndlp->nlp_usg_map,
4195 atomic_read(&ndlp->kref.refcount));
4196 return NULL;
4198 /* The ndlp should not already be in active mode */
4199 if (NLP_CHK_NODE_ACT(ndlp)) {
4200 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
4201 lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
4202 "0278 lpfc_enable_node: ndlp:x%p "
4203 "usgmap:x%x refcnt:%d\n",
4204 (void *)ndlp, ndlp->nlp_usg_map,
4205 atomic_read(&ndlp->kref.refcount));
4206 return NULL;
4209 /* Keep the original DID */
4210 did = ndlp->nlp_DID;
4212 /* re-initialize ndlp except of ndlp linked list pointer */
4213 memset((((char *)ndlp) + sizeof (struct list_head)), 0,
4214 sizeof (struct lpfc_nodelist) - sizeof (struct list_head));
4215 lpfc_initialize_node(vport, ndlp, did);
4217 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
4218 if (vport->phba->sli_rev == LPFC_SLI_REV4)
4219 ndlp->nlp_rpi = lpfc_sli4_alloc_rpi(vport->phba);
4222 if (state != NLP_STE_UNUSED_NODE)
4223 lpfc_nlp_set_state(vport, ndlp, state);
4225 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE,
4226 "node enable: did:x%x",
4227 ndlp->nlp_DID, 0, 0);
4228 return ndlp;
4231 void
4232 lpfc_drop_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4235 * Use of lpfc_drop_node and UNUSED list: lpfc_drop_node should
4236 * be used if we wish to issue the "last" lpfc_nlp_put() to remove
4237 * the ndlp from the vport. The ndlp marked as UNUSED on the list
4238 * until ALL other outstanding threads have completed. We check
4239 * that the ndlp not already in the UNUSED state before we proceed.
4241 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
4242 return;
4243 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE);
4244 if (vport->phba->sli_rev == LPFC_SLI_REV4)
4245 lpfc_cleanup_vports_rrqs(vport, ndlp);
4246 lpfc_nlp_put(ndlp);
4247 return;
4251 * Start / ReStart rescue timer for Discovery / RSCN handling
4253 void
4254 lpfc_set_disctmo(struct lpfc_vport *vport)
4256 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4257 struct lpfc_hba *phba = vport->phba;
4258 uint32_t tmo;
4260 if (vport->port_state == LPFC_LOCAL_CFG_LINK) {
4261 /* For FAN, timeout should be greater than edtov */
4262 tmo = (((phba->fc_edtov + 999) / 1000) + 1);
4263 } else {
4264 /* Normal discovery timeout should be > than ELS/CT timeout
4265 * FC spec states we need 3 * ratov for CT requests
4267 tmo = ((phba->fc_ratov * 3) + 3);
4271 if (!timer_pending(&vport->fc_disctmo)) {
4272 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
4273 "set disc timer: tmo:x%x state:x%x flg:x%x",
4274 tmo, vport->port_state, vport->fc_flag);
4277 mod_timer(&vport->fc_disctmo, jiffies + msecs_to_jiffies(1000 * tmo));
4278 spin_lock_irq(shost->host_lock);
4279 vport->fc_flag |= FC_DISC_TMO;
4280 spin_unlock_irq(shost->host_lock);
4282 /* Start Discovery Timer state <hba_state> */
4283 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
4284 "0247 Start Discovery Timer state x%x "
4285 "Data: x%x x%lx x%x x%x\n",
4286 vport->port_state, tmo,
4287 (unsigned long)&vport->fc_disctmo, vport->fc_plogi_cnt,
4288 vport->fc_adisc_cnt);
4290 return;
4294 * Cancel rescue timer for Discovery / RSCN handling
4297 lpfc_can_disctmo(struct lpfc_vport *vport)
4299 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4300 unsigned long iflags;
4302 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
4303 "can disc timer: state:x%x rtry:x%x flg:x%x",
4304 vport->port_state, vport->fc_ns_retry, vport->fc_flag);
4306 /* Turn off discovery timer if its running */
4307 if (vport->fc_flag & FC_DISC_TMO) {
4308 spin_lock_irqsave(shost->host_lock, iflags);
4309 vport->fc_flag &= ~FC_DISC_TMO;
4310 spin_unlock_irqrestore(shost->host_lock, iflags);
4311 del_timer_sync(&vport->fc_disctmo);
4312 spin_lock_irqsave(&vport->work_port_lock, iflags);
4313 vport->work_port_events &= ~WORKER_DISC_TMO;
4314 spin_unlock_irqrestore(&vport->work_port_lock, iflags);
4317 /* Cancel Discovery Timer state <hba_state> */
4318 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
4319 "0248 Cancel Discovery Timer state x%x "
4320 "Data: x%x x%x x%x\n",
4321 vport->port_state, vport->fc_flag,
4322 vport->fc_plogi_cnt, vport->fc_adisc_cnt);
4323 return 0;
4327 * Check specified ring for outstanding IOCB on the SLI queue
4328 * Return true if iocb matches the specified nport
4331 lpfc_check_sli_ndlp(struct lpfc_hba *phba,
4332 struct lpfc_sli_ring *pring,
4333 struct lpfc_iocbq *iocb,
4334 struct lpfc_nodelist *ndlp)
4336 struct lpfc_sli *psli = &phba->sli;
4337 IOCB_t *icmd = &iocb->iocb;
4338 struct lpfc_vport *vport = ndlp->vport;
4340 if (iocb->vport != vport)
4341 return 0;
4343 if (pring->ringno == LPFC_ELS_RING) {
4344 switch (icmd->ulpCommand) {
4345 case CMD_GEN_REQUEST64_CR:
4346 if (iocb->context_un.ndlp == ndlp)
4347 return 1;
4348 case CMD_ELS_REQUEST64_CR:
4349 if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID)
4350 return 1;
4351 case CMD_XMIT_ELS_RSP64_CX:
4352 if (iocb->context1 == (uint8_t *) ndlp)
4353 return 1;
4355 } else if (pring->ringno == psli->extra_ring) {
4357 } else if (pring->ringno == psli->fcp_ring) {
4358 /* Skip match check if waiting to relogin to FCP target */
4359 if ((ndlp->nlp_type & NLP_FCP_TARGET) &&
4360 (ndlp->nlp_flag & NLP_DELAY_TMO)) {
4361 return 0;
4363 if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi) {
4364 return 1;
4366 } else if (pring->ringno == psli->next_ring) {
4369 return 0;
4373 * Free resources / clean up outstanding I/Os
4374 * associated with nlp_rpi in the LPFC_NODELIST entry.
4376 static int
4377 lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
4379 LIST_HEAD(completions);
4380 struct lpfc_sli *psli;
4381 struct lpfc_sli_ring *pring;
4382 struct lpfc_iocbq *iocb, *next_iocb;
4383 uint32_t i;
4385 lpfc_fabric_abort_nport(ndlp);
4388 * Everything that matches on txcmplq will be returned
4389 * by firmware with a no rpi error.
4391 psli = &phba->sli;
4392 if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
4393 /* Now process each ring */
4394 for (i = 0; i < psli->num_rings; i++) {
4395 pring = &psli->ring[i];
4397 spin_lock_irq(&phba->hbalock);
4398 list_for_each_entry_safe(iocb, next_iocb, &pring->txq,
4399 list) {
4401 * Check to see if iocb matches the nport we are
4402 * looking for
4404 if ((lpfc_check_sli_ndlp(phba, pring, iocb,
4405 ndlp))) {
4406 /* It matches, so deque and call compl
4407 with an error */
4408 list_move_tail(&iocb->list,
4409 &completions);
4412 spin_unlock_irq(&phba->hbalock);
4416 /* Cancel all the IOCBs from the completions list */
4417 lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
4418 IOERR_SLI_ABORTED);
4420 return 0;
4424 * lpfc_nlp_logo_unreg - Unreg mailbox completion handler before LOGO
4425 * @phba: Pointer to HBA context object.
4426 * @pmb: Pointer to mailbox object.
4428 * This function will issue an ELS LOGO command after completing
4429 * the UNREG_RPI.
4431 void
4432 lpfc_nlp_logo_unreg(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
4434 struct lpfc_vport *vport = pmb->vport;
4435 struct lpfc_nodelist *ndlp;
4437 ndlp = (struct lpfc_nodelist *)(pmb->context1);
4438 if (!ndlp)
4439 return;
4440 lpfc_issue_els_logo(vport, ndlp, 0);
4441 mempool_free(pmb, phba->mbox_mem_pool);
4445 * Free rpi associated with LPFC_NODELIST entry.
4446 * This routine is called from lpfc_freenode(), when we are removing
4447 * a LPFC_NODELIST entry. It is also called if the driver initiates a
4448 * LOGO that completes successfully, and we are waiting to PLOGI back
4449 * to the remote NPort. In addition, it is called after we receive
4450 * and unsolicated ELS cmd, send back a rsp, the rsp completes and
4451 * we are waiting to PLOGI back to the remote NPort.
4454 lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4456 struct lpfc_hba *phba = vport->phba;
4457 LPFC_MBOXQ_t *mbox;
4458 int rc;
4459 uint16_t rpi;
4461 if (ndlp->nlp_flag & NLP_RPI_REGISTERED ||
4462 ndlp->nlp_flag & NLP_REG_LOGIN_SEND) {
4463 if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND)
4464 lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI,
4465 "3366 RPI x%x needs to be "
4466 "unregistered nlp_flag x%x "
4467 "did x%x\n",
4468 ndlp->nlp_rpi, ndlp->nlp_flag,
4469 ndlp->nlp_DID);
4470 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
4471 if (mbox) {
4472 /* SLI4 ports require the physical rpi value. */
4473 rpi = ndlp->nlp_rpi;
4474 if (phba->sli_rev == LPFC_SLI_REV4)
4475 rpi = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
4477 lpfc_unreg_login(phba, vport->vpi, rpi, mbox);
4478 mbox->vport = vport;
4479 if (ndlp->nlp_flag & NLP_ISSUE_LOGO) {
4480 mbox->context1 = ndlp;
4481 mbox->mbox_cmpl = lpfc_nlp_logo_unreg;
4482 } else {
4483 mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
4486 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
4487 if (rc == MBX_NOT_FINISHED)
4488 mempool_free(mbox, phba->mbox_mem_pool);
4490 lpfc_no_rpi(phba, ndlp);
4492 if (phba->sli_rev != LPFC_SLI_REV4)
4493 ndlp->nlp_rpi = 0;
4494 ndlp->nlp_flag &= ~NLP_RPI_REGISTERED;
4495 ndlp->nlp_flag &= ~NLP_NPR_ADISC;
4496 return 1;
4498 return 0;
4502 * lpfc_unreg_hba_rpis - Unregister rpis registered to the hba.
4503 * @phba: pointer to lpfc hba data structure.
4505 * This routine is invoked to unregister all the currently registered RPIs
4506 * to the HBA.
4508 void
4509 lpfc_unreg_hba_rpis(struct lpfc_hba *phba)
4511 struct lpfc_vport **vports;
4512 struct lpfc_nodelist *ndlp;
4513 struct Scsi_Host *shost;
4514 int i;
4516 vports = lpfc_create_vport_work_array(phba);
4517 if (!vports) {
4518 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
4519 "2884 Vport array allocation failed \n");
4520 return;
4522 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
4523 shost = lpfc_shost_from_vport(vports[i]);
4524 spin_lock_irq(shost->host_lock);
4525 list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) {
4526 if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
4527 /* The mempool_alloc might sleep */
4528 spin_unlock_irq(shost->host_lock);
4529 lpfc_unreg_rpi(vports[i], ndlp);
4530 spin_lock_irq(shost->host_lock);
4533 spin_unlock_irq(shost->host_lock);
4535 lpfc_destroy_vport_work_array(phba, vports);
4538 void
4539 lpfc_unreg_all_rpis(struct lpfc_vport *vport)
4541 struct lpfc_hba *phba = vport->phba;
4542 LPFC_MBOXQ_t *mbox;
4543 int rc;
4545 if (phba->sli_rev == LPFC_SLI_REV4) {
4546 lpfc_sli4_unreg_all_rpis(vport);
4547 return;
4550 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
4551 if (mbox) {
4552 lpfc_unreg_login(phba, vport->vpi, LPFC_UNREG_ALL_RPIS_VPORT,
4553 mbox);
4554 mbox->vport = vport;
4555 mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
4556 mbox->context1 = NULL;
4557 rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
4558 if (rc != MBX_TIMEOUT)
4559 mempool_free(mbox, phba->mbox_mem_pool);
4561 if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
4562 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
4563 "1836 Could not issue "
4564 "unreg_login(all_rpis) status %d\n", rc);
4568 void
4569 lpfc_unreg_default_rpis(struct lpfc_vport *vport)
4571 struct lpfc_hba *phba = vport->phba;
4572 LPFC_MBOXQ_t *mbox;
4573 int rc;
4575 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
4576 if (mbox) {
4577 lpfc_unreg_did(phba, vport->vpi, LPFC_UNREG_ALL_DFLT_RPIS,
4578 mbox);
4579 mbox->vport = vport;
4580 mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
4581 mbox->context1 = NULL;
4582 rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
4583 if (rc != MBX_TIMEOUT)
4584 mempool_free(mbox, phba->mbox_mem_pool);
4586 if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
4587 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
4588 "1815 Could not issue "
4589 "unreg_did (default rpis) status %d\n",
4590 rc);
4595 * Free resources associated with LPFC_NODELIST entry
4596 * so it can be freed.
4598 static int
4599 lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4601 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4602 struct lpfc_hba *phba = vport->phba;
4603 LPFC_MBOXQ_t *mb, *nextmb;
4604 struct lpfc_dmabuf *mp;
4606 /* Cleanup node for NPort <nlp_DID> */
4607 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
4608 "0900 Cleanup node for NPort x%x "
4609 "Data: x%x x%x x%x\n",
4610 ndlp->nlp_DID, ndlp->nlp_flag,
4611 ndlp->nlp_state, ndlp->nlp_rpi);
4612 if (NLP_CHK_FREE_REQ(ndlp)) {
4613 lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
4614 "0280 lpfc_cleanup_node: ndlp:x%p "
4615 "usgmap:x%x refcnt:%d\n",
4616 (void *)ndlp, ndlp->nlp_usg_map,
4617 atomic_read(&ndlp->kref.refcount));
4618 lpfc_dequeue_node(vport, ndlp);
4619 } else {
4620 lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
4621 "0281 lpfc_cleanup_node: ndlp:x%p "
4622 "usgmap:x%x refcnt:%d\n",
4623 (void *)ndlp, ndlp->nlp_usg_map,
4624 atomic_read(&ndlp->kref.refcount));
4625 lpfc_disable_node(vport, ndlp);
4629 /* Don't need to clean up REG_LOGIN64 cmds for Default RPI cleanup */
4631 /* cleanup any ndlp on mbox q waiting for reglogin cmpl */
4632 if ((mb = phba->sli.mbox_active)) {
4633 if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
4634 !(mb->mbox_flag & LPFC_MBX_IMED_UNREG) &&
4635 (ndlp == (struct lpfc_nodelist *) mb->context2)) {
4636 mb->context2 = NULL;
4637 mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
4641 spin_lock_irq(&phba->hbalock);
4642 /* Cleanup REG_LOGIN completions which are not yet processed */
4643 list_for_each_entry(mb, &phba->sli.mboxq_cmpl, list) {
4644 if ((mb->u.mb.mbxCommand != MBX_REG_LOGIN64) ||
4645 (mb->mbox_flag & LPFC_MBX_IMED_UNREG) ||
4646 (ndlp != (struct lpfc_nodelist *) mb->context2))
4647 continue;
4649 mb->context2 = NULL;
4650 mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
4653 list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
4654 if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
4655 !(mb->mbox_flag & LPFC_MBX_IMED_UNREG) &&
4656 (ndlp == (struct lpfc_nodelist *) mb->context2)) {
4657 mp = (struct lpfc_dmabuf *) (mb->context1);
4658 if (mp) {
4659 __lpfc_mbuf_free(phba, mp->virt, mp->phys);
4660 kfree(mp);
4662 list_del(&mb->list);
4663 mempool_free(mb, phba->mbox_mem_pool);
4664 /* We shall not invoke the lpfc_nlp_put to decrement
4665 * the ndlp reference count as we are in the process
4666 * of lpfc_nlp_release.
4670 spin_unlock_irq(&phba->hbalock);
4672 lpfc_els_abort(phba, ndlp);
4674 spin_lock_irq(shost->host_lock);
4675 ndlp->nlp_flag &= ~NLP_DELAY_TMO;
4676 spin_unlock_irq(shost->host_lock);
4678 ndlp->nlp_last_elscmd = 0;
4679 del_timer_sync(&ndlp->nlp_delayfunc);
4681 list_del_init(&ndlp->els_retry_evt.evt_listp);
4682 list_del_init(&ndlp->dev_loss_evt.evt_listp);
4683 lpfc_cleanup_vports_rrqs(vport, ndlp);
4684 lpfc_unreg_rpi(vport, ndlp);
4686 return 0;
4690 * Check to see if we can free the nlp back to the freelist.
4691 * If we are in the middle of using the nlp in the discovery state
4692 * machine, defer the free till we reach the end of the state machine.
4694 static void
4695 lpfc_nlp_remove(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4697 struct lpfc_hba *phba = vport->phba;
4698 struct lpfc_rport_data *rdata;
4699 LPFC_MBOXQ_t *mbox;
4700 int rc;
4702 lpfc_cancel_retry_delay_tmo(vport, ndlp);
4703 if ((ndlp->nlp_flag & NLP_DEFER_RM) &&
4704 !(ndlp->nlp_flag & NLP_REG_LOGIN_SEND) &&
4705 !(ndlp->nlp_flag & NLP_RPI_REGISTERED)) {
4706 /* For this case we need to cleanup the default rpi
4707 * allocated by the firmware.
4709 if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL))
4710 != NULL) {
4711 rc = lpfc_reg_rpi(phba, vport->vpi, ndlp->nlp_DID,
4712 (uint8_t *) &vport->fc_sparam, mbox, ndlp->nlp_rpi);
4713 if (rc) {
4714 mempool_free(mbox, phba->mbox_mem_pool);
4716 else {
4717 mbox->mbox_flag |= LPFC_MBX_IMED_UNREG;
4718 mbox->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi;
4719 mbox->vport = vport;
4720 mbox->context2 = ndlp;
4721 rc =lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
4722 if (rc == MBX_NOT_FINISHED) {
4723 mempool_free(mbox, phba->mbox_mem_pool);
4728 lpfc_cleanup_node(vport, ndlp);
4731 * We can get here with a non-NULL ndlp->rport because when we
4732 * unregister a rport we don't break the rport/node linkage. So if we
4733 * do, make sure we don't leaving any dangling pointers behind.
4735 if (ndlp->rport) {
4736 rdata = ndlp->rport->dd_data;
4737 rdata->pnode = NULL;
4738 ndlp->rport = NULL;
4742 static int
4743 lpfc_matchdid(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
4744 uint32_t did)
4746 D_ID mydid, ndlpdid, matchdid;
4748 if (did == Bcast_DID)
4749 return 0;
4751 /* First check for Direct match */
4752 if (ndlp->nlp_DID == did)
4753 return 1;
4755 /* Next check for area/domain identically equals 0 match */
4756 mydid.un.word = vport->fc_myDID;
4757 if ((mydid.un.b.domain == 0) && (mydid.un.b.area == 0)) {
4758 return 0;
4761 matchdid.un.word = did;
4762 ndlpdid.un.word = ndlp->nlp_DID;
4763 if (matchdid.un.b.id == ndlpdid.un.b.id) {
4764 if ((mydid.un.b.domain == matchdid.un.b.domain) &&
4765 (mydid.un.b.area == matchdid.un.b.area)) {
4766 if ((ndlpdid.un.b.domain == 0) &&
4767 (ndlpdid.un.b.area == 0)) {
4768 if (ndlpdid.un.b.id)
4769 return 1;
4771 return 0;
4774 matchdid.un.word = ndlp->nlp_DID;
4775 if ((mydid.un.b.domain == ndlpdid.un.b.domain) &&
4776 (mydid.un.b.area == ndlpdid.un.b.area)) {
4777 if ((matchdid.un.b.domain == 0) &&
4778 (matchdid.un.b.area == 0)) {
4779 if (matchdid.un.b.id)
4780 return 1;
4784 return 0;
4787 /* Search for a nodelist entry */
4788 static struct lpfc_nodelist *
4789 __lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did)
4791 struct lpfc_nodelist *ndlp;
4792 uint32_t data1;
4794 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
4795 if (lpfc_matchdid(vport, ndlp, did)) {
4796 data1 = (((uint32_t) ndlp->nlp_state << 24) |
4797 ((uint32_t) ndlp->nlp_xri << 16) |
4798 ((uint32_t) ndlp->nlp_type << 8) |
4799 ((uint32_t) ndlp->nlp_rpi & 0xff));
4800 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
4801 "0929 FIND node DID "
4802 "Data: x%p x%x x%x x%x\n",
4803 ndlp, ndlp->nlp_DID,
4804 ndlp->nlp_flag, data1);
4805 return ndlp;
4809 /* FIND node did <did> NOT FOUND */
4810 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
4811 "0932 FIND node did x%x NOT FOUND.\n", did);
4812 return NULL;
4815 struct lpfc_nodelist *
4816 lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did)
4818 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4819 struct lpfc_nodelist *ndlp;
4820 unsigned long iflags;
4822 spin_lock_irqsave(shost->host_lock, iflags);
4823 ndlp = __lpfc_findnode_did(vport, did);
4824 spin_unlock_irqrestore(shost->host_lock, iflags);
4825 return ndlp;
4828 struct lpfc_nodelist *
4829 lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
4831 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4832 struct lpfc_nodelist *ndlp;
4834 ndlp = lpfc_findnode_did(vport, did);
4835 if (!ndlp) {
4836 if ((vport->fc_flag & FC_RSCN_MODE) != 0 &&
4837 lpfc_rscn_payload_check(vport, did) == 0)
4838 return NULL;
4839 ndlp = (struct lpfc_nodelist *)
4840 mempool_alloc(vport->phba->nlp_mem_pool, GFP_KERNEL);
4841 if (!ndlp)
4842 return NULL;
4843 lpfc_nlp_init(vport, ndlp, did);
4844 lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
4845 spin_lock_irq(shost->host_lock);
4846 ndlp->nlp_flag |= NLP_NPR_2B_DISC;
4847 spin_unlock_irq(shost->host_lock);
4848 return ndlp;
4849 } else if (!NLP_CHK_NODE_ACT(ndlp)) {
4850 ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_NPR_NODE);
4851 if (!ndlp)
4852 return NULL;
4853 spin_lock_irq(shost->host_lock);
4854 ndlp->nlp_flag |= NLP_NPR_2B_DISC;
4855 spin_unlock_irq(shost->host_lock);
4856 return ndlp;
4859 if ((vport->fc_flag & FC_RSCN_MODE) &&
4860 !(vport->fc_flag & FC_NDISC_ACTIVE)) {
4861 if (lpfc_rscn_payload_check(vport, did)) {
4862 /* If we've already received a PLOGI from this NPort
4863 * we don't need to try to discover it again.
4865 if (ndlp->nlp_flag & NLP_RCV_PLOGI)
4866 return NULL;
4868 /* Since this node is marked for discovery,
4869 * delay timeout is not needed.
4871 lpfc_cancel_retry_delay_tmo(vport, ndlp);
4872 spin_lock_irq(shost->host_lock);
4873 ndlp->nlp_flag |= NLP_NPR_2B_DISC;
4874 spin_unlock_irq(shost->host_lock);
4875 } else
4876 ndlp = NULL;
4877 } else {
4878 /* If we've already received a PLOGI from this NPort,
4879 * or we are already in the process of discovery on it,
4880 * we don't need to try to discover it again.
4882 if (ndlp->nlp_state == NLP_STE_ADISC_ISSUE ||
4883 ndlp->nlp_state == NLP_STE_PLOGI_ISSUE ||
4884 ndlp->nlp_flag & NLP_RCV_PLOGI)
4885 return NULL;
4886 lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
4887 spin_lock_irq(shost->host_lock);
4888 ndlp->nlp_flag |= NLP_NPR_2B_DISC;
4889 spin_unlock_irq(shost->host_lock);
4891 return ndlp;
4894 /* Build a list of nodes to discover based on the loopmap */
4895 void
4896 lpfc_disc_list_loopmap(struct lpfc_vport *vport)
4898 struct lpfc_hba *phba = vport->phba;
4899 int j;
4900 uint32_t alpa, index;
4902 if (!lpfc_is_link_up(phba))
4903 return;
4905 if (phba->fc_topology != LPFC_TOPOLOGY_LOOP)
4906 return;
4908 /* Check for loop map present or not */
4909 if (phba->alpa_map[0]) {
4910 for (j = 1; j <= phba->alpa_map[0]; j++) {
4911 alpa = phba->alpa_map[j];
4912 if (((vport->fc_myDID & 0xff) == alpa) || (alpa == 0))
4913 continue;
4914 lpfc_setup_disc_node(vport, alpa);
4916 } else {
4917 /* No alpamap, so try all alpa's */
4918 for (j = 0; j < FC_MAXLOOP; j++) {
4919 /* If cfg_scan_down is set, start from highest
4920 * ALPA (0xef) to lowest (0x1).
4922 if (vport->cfg_scan_down)
4923 index = j;
4924 else
4925 index = FC_MAXLOOP - j - 1;
4926 alpa = lpfcAlpaArray[index];
4927 if ((vport->fc_myDID & 0xff) == alpa)
4928 continue;
4929 lpfc_setup_disc_node(vport, alpa);
4932 return;
4935 void
4936 lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport)
4938 LPFC_MBOXQ_t *mbox;
4939 struct lpfc_sli *psli = &phba->sli;
4940 struct lpfc_sli_ring *extra_ring = &psli->ring[psli->extra_ring];
4941 struct lpfc_sli_ring *fcp_ring = &psli->ring[psli->fcp_ring];
4942 struct lpfc_sli_ring *next_ring = &psli->ring[psli->next_ring];
4943 int rc;
4946 * if it's not a physical port or if we already send
4947 * clear_la then don't send it.
4949 if ((phba->link_state >= LPFC_CLEAR_LA) ||
4950 (vport->port_type != LPFC_PHYSICAL_PORT) ||
4951 (phba->sli_rev == LPFC_SLI_REV4))
4952 return;
4954 /* Link up discovery */
4955 if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL)) != NULL) {
4956 phba->link_state = LPFC_CLEAR_LA;
4957 lpfc_clear_la(phba, mbox);
4958 mbox->mbox_cmpl = lpfc_mbx_cmpl_clear_la;
4959 mbox->vport = vport;
4960 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
4961 if (rc == MBX_NOT_FINISHED) {
4962 mempool_free(mbox, phba->mbox_mem_pool);
4963 lpfc_disc_flush_list(vport);
4964 extra_ring->flag &= ~LPFC_STOP_IOCB_EVENT;
4965 fcp_ring->flag &= ~LPFC_STOP_IOCB_EVENT;
4966 next_ring->flag &= ~LPFC_STOP_IOCB_EVENT;
4967 phba->link_state = LPFC_HBA_ERROR;
4972 /* Reg_vpi to tell firmware to resume normal operations */
4973 void
4974 lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport)
4976 LPFC_MBOXQ_t *regvpimbox;
4978 regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
4979 if (regvpimbox) {
4980 lpfc_reg_vpi(vport, regvpimbox);
4981 regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi;
4982 regvpimbox->vport = vport;
4983 if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT)
4984 == MBX_NOT_FINISHED) {
4985 mempool_free(regvpimbox, phba->mbox_mem_pool);
4990 /* Start Link up / RSCN discovery on NPR nodes */
4991 void
4992 lpfc_disc_start(struct lpfc_vport *vport)
4994 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4995 struct lpfc_hba *phba = vport->phba;
4996 uint32_t num_sent;
4997 uint32_t clear_la_pending;
4998 int did_changed;
5000 if (!lpfc_is_link_up(phba)) {
5001 lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI,
5002 "3315 Link is not up %x\n",
5003 phba->link_state);
5004 return;
5007 if (phba->link_state == LPFC_CLEAR_LA)
5008 clear_la_pending = 1;
5009 else
5010 clear_la_pending = 0;
5012 if (vport->port_state < LPFC_VPORT_READY)
5013 vport->port_state = LPFC_DISC_AUTH;
5015 lpfc_set_disctmo(vport);
5017 if (vport->fc_prevDID == vport->fc_myDID)
5018 did_changed = 0;
5019 else
5020 did_changed = 1;
5022 vport->fc_prevDID = vport->fc_myDID;
5023 vport->num_disc_nodes = 0;
5025 /* Start Discovery state <hba_state> */
5026 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
5027 "0202 Start Discovery hba state x%x "
5028 "Data: x%x x%x x%x\n",
5029 vport->port_state, vport->fc_flag, vport->fc_plogi_cnt,
5030 vport->fc_adisc_cnt);
5032 /* First do ADISCs - if any */
5033 num_sent = lpfc_els_disc_adisc(vport);
5035 if (num_sent)
5036 return;
5038 /* Register the VPI for SLI3, NPIV only. */
5039 if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
5040 !(vport->fc_flag & FC_PT2PT) &&
5041 !(vport->fc_flag & FC_RSCN_MODE) &&
5042 (phba->sli_rev < LPFC_SLI_REV4)) {
5043 if (vport->port_type == LPFC_PHYSICAL_PORT)
5044 lpfc_issue_clear_la(phba, vport);
5045 lpfc_issue_reg_vpi(phba, vport);
5046 return;
5050 * For SLI2, we need to set port_state to READY and continue
5051 * discovery.
5053 if (vport->port_state < LPFC_VPORT_READY && !clear_la_pending) {
5054 /* If we get here, there is nothing to ADISC */
5055 if (vport->port_type == LPFC_PHYSICAL_PORT)
5056 lpfc_issue_clear_la(phba, vport);
5058 if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) {
5059 vport->num_disc_nodes = 0;
5060 /* go thru NPR nodes and issue ELS PLOGIs */
5061 if (vport->fc_npr_cnt)
5062 lpfc_els_disc_plogi(vport);
5064 if (!vport->num_disc_nodes) {
5065 spin_lock_irq(shost->host_lock);
5066 vport->fc_flag &= ~FC_NDISC_ACTIVE;
5067 spin_unlock_irq(shost->host_lock);
5068 lpfc_can_disctmo(vport);
5071 vport->port_state = LPFC_VPORT_READY;
5072 } else {
5073 /* Next do PLOGIs - if any */
5074 num_sent = lpfc_els_disc_plogi(vport);
5076 if (num_sent)
5077 return;
5079 if (vport->fc_flag & FC_RSCN_MODE) {
5080 /* Check to see if more RSCNs came in while we
5081 * were processing this one.
5083 if ((vport->fc_rscn_id_cnt == 0) &&
5084 (!(vport->fc_flag & FC_RSCN_DISCOVERY))) {
5085 spin_lock_irq(shost->host_lock);
5086 vport->fc_flag &= ~FC_RSCN_MODE;
5087 spin_unlock_irq(shost->host_lock);
5088 lpfc_can_disctmo(vport);
5089 } else
5090 lpfc_els_handle_rscn(vport);
5093 return;
5097 * Ignore completion for all IOCBs on tx and txcmpl queue for ELS
5098 * ring the match the sppecified nodelist.
5100 static void
5101 lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
5103 LIST_HEAD(completions);
5104 struct lpfc_sli *psli;
5105 IOCB_t *icmd;
5106 struct lpfc_iocbq *iocb, *next_iocb;
5107 struct lpfc_sli_ring *pring;
5109 psli = &phba->sli;
5110 pring = &psli->ring[LPFC_ELS_RING];
5112 /* Error matching iocb on txq or txcmplq
5113 * First check the txq.
5115 spin_lock_irq(&phba->hbalock);
5116 list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) {
5117 if (iocb->context1 != ndlp) {
5118 continue;
5120 icmd = &iocb->iocb;
5121 if ((icmd->ulpCommand == CMD_ELS_REQUEST64_CR) ||
5122 (icmd->ulpCommand == CMD_XMIT_ELS_RSP64_CX)) {
5124 list_move_tail(&iocb->list, &completions);
5128 /* Next check the txcmplq */
5129 list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) {
5130 if (iocb->context1 != ndlp) {
5131 continue;
5133 icmd = &iocb->iocb;
5134 if (icmd->ulpCommand == CMD_ELS_REQUEST64_CR ||
5135 icmd->ulpCommand == CMD_XMIT_ELS_RSP64_CX) {
5136 lpfc_sli_issue_abort_iotag(phba, pring, iocb);
5139 spin_unlock_irq(&phba->hbalock);
5141 /* Cancel all the IOCBs from the completions list */
5142 lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
5143 IOERR_SLI_ABORTED);
5146 static void
5147 lpfc_disc_flush_list(struct lpfc_vport *vport)
5149 struct lpfc_nodelist *ndlp, *next_ndlp;
5150 struct lpfc_hba *phba = vport->phba;
5152 if (vport->fc_plogi_cnt || vport->fc_adisc_cnt) {
5153 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes,
5154 nlp_listp) {
5155 if (!NLP_CHK_NODE_ACT(ndlp))
5156 continue;
5157 if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE ||
5158 ndlp->nlp_state == NLP_STE_ADISC_ISSUE) {
5159 lpfc_free_tx(phba, ndlp);
5165 void
5166 lpfc_cleanup_discovery_resources(struct lpfc_vport *vport)
5168 lpfc_els_flush_rscn(vport);
5169 lpfc_els_flush_cmd(vport);
5170 lpfc_disc_flush_list(vport);
5173 /*****************************************************************************/
5175 * NAME: lpfc_disc_timeout
5177 * FUNCTION: Fibre Channel driver discovery timeout routine.
5179 * EXECUTION ENVIRONMENT: interrupt only
5181 * CALLED FROM:
5182 * Timer function
5184 * RETURNS:
5185 * none
5187 /*****************************************************************************/
5188 void
5189 lpfc_disc_timeout(unsigned long ptr)
5191 struct lpfc_vport *vport = (struct lpfc_vport *) ptr;
5192 struct lpfc_hba *phba = vport->phba;
5193 uint32_t tmo_posted;
5194 unsigned long flags = 0;
5196 if (unlikely(!phba))
5197 return;
5199 spin_lock_irqsave(&vport->work_port_lock, flags);
5200 tmo_posted = vport->work_port_events & WORKER_DISC_TMO;
5201 if (!tmo_posted)
5202 vport->work_port_events |= WORKER_DISC_TMO;
5203 spin_unlock_irqrestore(&vport->work_port_lock, flags);
5205 if (!tmo_posted)
5206 lpfc_worker_wake_up(phba);
5207 return;
5210 static void
5211 lpfc_disc_timeout_handler(struct lpfc_vport *vport)
5213 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
5214 struct lpfc_hba *phba = vport->phba;
5215 struct lpfc_sli *psli = &phba->sli;
5216 struct lpfc_nodelist *ndlp, *next_ndlp;
5217 LPFC_MBOXQ_t *initlinkmbox;
5218 int rc, clrlaerr = 0;
5220 if (!(vport->fc_flag & FC_DISC_TMO))
5221 return;
5223 spin_lock_irq(shost->host_lock);
5224 vport->fc_flag &= ~FC_DISC_TMO;
5225 spin_unlock_irq(shost->host_lock);
5227 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
5228 "disc timeout: state:x%x rtry:x%x flg:x%x",
5229 vport->port_state, vport->fc_ns_retry, vport->fc_flag);
5231 switch (vport->port_state) {
5233 case LPFC_LOCAL_CFG_LINK:
5234 /* port_state is identically LPFC_LOCAL_CFG_LINK while waiting for
5235 * FAN
5237 /* FAN timeout */
5238 lpfc_printf_vlog(vport, KERN_WARNING, LOG_DISCOVERY,
5239 "0221 FAN timeout\n");
5240 /* Start discovery by sending FLOGI, clean up old rpis */
5241 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes,
5242 nlp_listp) {
5243 if (!NLP_CHK_NODE_ACT(ndlp))
5244 continue;
5245 if (ndlp->nlp_state != NLP_STE_NPR_NODE)
5246 continue;
5247 if (ndlp->nlp_type & NLP_FABRIC) {
5248 /* Clean up the ndlp on Fabric connections */
5249 lpfc_drop_node(vport, ndlp);
5251 } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) {
5252 /* Fail outstanding IO now since device
5253 * is marked for PLOGI.
5255 lpfc_unreg_rpi(vport, ndlp);
5258 if (vport->port_state != LPFC_FLOGI) {
5259 if (phba->sli_rev <= LPFC_SLI_REV3)
5260 lpfc_initial_flogi(vport);
5261 else
5262 lpfc_issue_init_vfi(vport);
5263 return;
5265 break;
5267 case LPFC_FDISC:
5268 case LPFC_FLOGI:
5269 /* port_state is identically LPFC_FLOGI while waiting for FLOGI cmpl */
5270 /* Initial FLOGI timeout */
5271 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5272 "0222 Initial %s timeout\n",
5273 vport->vpi ? "FDISC" : "FLOGI");
5275 /* Assume no Fabric and go on with discovery.
5276 * Check for outstanding ELS FLOGI to abort.
5279 /* FLOGI failed, so just use loop map to make discovery list */
5280 lpfc_disc_list_loopmap(vport);
5282 /* Start discovery */
5283 lpfc_disc_start(vport);
5284 break;
5286 case LPFC_FABRIC_CFG_LINK:
5287 /* hba_state is identically LPFC_FABRIC_CFG_LINK while waiting for
5288 NameServer login */
5289 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5290 "0223 Timeout while waiting for "
5291 "NameServer login\n");
5292 /* Next look for NameServer ndlp */
5293 ndlp = lpfc_findnode_did(vport, NameServer_DID);
5294 if (ndlp && NLP_CHK_NODE_ACT(ndlp))
5295 lpfc_els_abort(phba, ndlp);
5297 /* ReStart discovery */
5298 goto restart_disc;
5300 case LPFC_NS_QRY:
5301 /* Check for wait for NameServer Rsp timeout */
5302 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5303 "0224 NameServer Query timeout "
5304 "Data: x%x x%x\n",
5305 vport->fc_ns_retry, LPFC_MAX_NS_RETRY);
5307 if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) {
5308 /* Try it one more time */
5309 vport->fc_ns_retry++;
5310 rc = lpfc_ns_cmd(vport, SLI_CTNS_GID_FT,
5311 vport->fc_ns_retry, 0);
5312 if (rc == 0)
5313 break;
5315 vport->fc_ns_retry = 0;
5317 restart_disc:
5319 * Discovery is over.
5320 * set port_state to PORT_READY if SLI2.
5321 * cmpl_reg_vpi will set port_state to READY for SLI3.
5323 if (phba->sli_rev < LPFC_SLI_REV4) {
5324 if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
5325 lpfc_issue_reg_vpi(phba, vport);
5326 else {
5327 lpfc_issue_clear_la(phba, vport);
5328 vport->port_state = LPFC_VPORT_READY;
5332 /* Setup and issue mailbox INITIALIZE LINK command */
5333 initlinkmbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
5334 if (!initlinkmbox) {
5335 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5336 "0206 Device Discovery "
5337 "completion error\n");
5338 phba->link_state = LPFC_HBA_ERROR;
5339 break;
5342 lpfc_linkdown(phba);
5343 lpfc_init_link(phba, initlinkmbox, phba->cfg_topology,
5344 phba->cfg_link_speed);
5345 initlinkmbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
5346 initlinkmbox->vport = vport;
5347 initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
5348 rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT);
5349 lpfc_set_loopback_flag(phba);
5350 if (rc == MBX_NOT_FINISHED)
5351 mempool_free(initlinkmbox, phba->mbox_mem_pool);
5353 break;
5355 case LPFC_DISC_AUTH:
5356 /* Node Authentication timeout */
5357 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5358 "0227 Node Authentication timeout\n");
5359 lpfc_disc_flush_list(vport);
5362 * set port_state to PORT_READY if SLI2.
5363 * cmpl_reg_vpi will set port_state to READY for SLI3.
5365 if (phba->sli_rev < LPFC_SLI_REV4) {
5366 if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
5367 lpfc_issue_reg_vpi(phba, vport);
5368 else { /* NPIV Not enabled */
5369 lpfc_issue_clear_la(phba, vport);
5370 vport->port_state = LPFC_VPORT_READY;
5373 break;
5375 case LPFC_VPORT_READY:
5376 if (vport->fc_flag & FC_RSCN_MODE) {
5377 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5378 "0231 RSCN timeout Data: x%x "
5379 "x%x\n",
5380 vport->fc_ns_retry, LPFC_MAX_NS_RETRY);
5382 /* Cleanup any outstanding ELS commands */
5383 lpfc_els_flush_cmd(vport);
5385 lpfc_els_flush_rscn(vport);
5386 lpfc_disc_flush_list(vport);
5388 break;
5390 default:
5391 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5392 "0273 Unexpected discovery timeout, "
5393 "vport State x%x\n", vport->port_state);
5394 break;
5397 switch (phba->link_state) {
5398 case LPFC_CLEAR_LA:
5399 /* CLEAR LA timeout */
5400 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5401 "0228 CLEAR LA timeout\n");
5402 clrlaerr = 1;
5403 break;
5405 case LPFC_LINK_UP:
5406 lpfc_issue_clear_la(phba, vport);
5407 /* Drop thru */
5408 case LPFC_LINK_UNKNOWN:
5409 case LPFC_WARM_START:
5410 case LPFC_INIT_START:
5411 case LPFC_INIT_MBX_CMDS:
5412 case LPFC_LINK_DOWN:
5413 case LPFC_HBA_ERROR:
5414 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5415 "0230 Unexpected timeout, hba link "
5416 "state x%x\n", phba->link_state);
5417 clrlaerr = 1;
5418 break;
5420 case LPFC_HBA_READY:
5421 break;
5424 if (clrlaerr) {
5425 lpfc_disc_flush_list(vport);
5426 psli->ring[(psli->extra_ring)].flag &= ~LPFC_STOP_IOCB_EVENT;
5427 psli->ring[(psli->fcp_ring)].flag &= ~LPFC_STOP_IOCB_EVENT;
5428 psli->ring[(psli->next_ring)].flag &= ~LPFC_STOP_IOCB_EVENT;
5429 vport->port_state = LPFC_VPORT_READY;
5432 return;
5436 * This routine handles processing a NameServer REG_LOGIN mailbox
5437 * command upon completion. It is setup in the LPFC_MBOXQ
5438 * as the completion routine when the command is
5439 * handed off to the SLI layer.
5441 void
5442 lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
5444 MAILBOX_t *mb = &pmb->u.mb;
5445 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
5446 struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
5447 struct lpfc_vport *vport = pmb->vport;
5449 pmb->context1 = NULL;
5450 pmb->context2 = NULL;
5452 if (phba->sli_rev < LPFC_SLI_REV4)
5453 ndlp->nlp_rpi = mb->un.varWords[0];
5454 ndlp->nlp_flag |= NLP_RPI_REGISTERED;
5455 ndlp->nlp_type |= NLP_FABRIC;
5456 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
5459 * Start issuing Fabric-Device Management Interface (FDMI) command to
5460 * 0xfffffa (FDMI well known port) or Delay issuing FDMI command if
5461 * fdmi-on=2 (supporting RPA/hostnmae)
5464 if (vport->cfg_fdmi_on == 1)
5465 lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA);
5466 else
5467 mod_timer(&vport->fc_fdmitmo,
5468 jiffies + msecs_to_jiffies(1000 * 60));
5470 /* decrement the node reference count held for this callback
5471 * function.
5473 lpfc_nlp_put(ndlp);
5474 lpfc_mbuf_free(phba, mp->virt, mp->phys);
5475 kfree(mp);
5476 mempool_free(pmb, phba->mbox_mem_pool);
5478 return;
5481 static int
5482 lpfc_filter_by_rpi(struct lpfc_nodelist *ndlp, void *param)
5484 uint16_t *rpi = param;
5486 /* check for active node */
5487 if (!NLP_CHK_NODE_ACT(ndlp))
5488 return 0;
5490 return ndlp->nlp_rpi == *rpi;
5493 static int
5494 lpfc_filter_by_wwpn(struct lpfc_nodelist *ndlp, void *param)
5496 return memcmp(&ndlp->nlp_portname, param,
5497 sizeof(ndlp->nlp_portname)) == 0;
5500 static struct lpfc_nodelist *
5501 __lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param)
5503 struct lpfc_nodelist *ndlp;
5505 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
5506 if (filter(ndlp, param)) {
5507 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
5508 "3185 FIND node filter %p DID "
5509 "Data: x%p x%x x%x\n",
5510 filter, ndlp, ndlp->nlp_DID,
5511 ndlp->nlp_flag);
5512 return ndlp;
5515 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
5516 "3186 FIND node filter %p NOT FOUND.\n", filter);
5517 return NULL;
5521 * This routine looks up the ndlp lists for the given RPI. If rpi found it
5522 * returns the node list element pointer else return NULL.
5524 struct lpfc_nodelist *
5525 __lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi)
5527 return __lpfc_find_node(vport, lpfc_filter_by_rpi, &rpi);
5531 * This routine looks up the ndlp lists for the given WWPN. If WWPN found it
5532 * returns the node element list pointer else return NULL.
5534 struct lpfc_nodelist *
5535 lpfc_findnode_wwpn(struct lpfc_vport *vport, struct lpfc_name *wwpn)
5537 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
5538 struct lpfc_nodelist *ndlp;
5540 spin_lock_irq(shost->host_lock);
5541 ndlp = __lpfc_find_node(vport, lpfc_filter_by_wwpn, wwpn);
5542 spin_unlock_irq(shost->host_lock);
5543 return ndlp;
5547 * This routine looks up the ndlp lists for the given RPI. If the rpi
5548 * is found, the routine returns the node element list pointer else
5549 * return NULL.
5551 struct lpfc_nodelist *
5552 lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi)
5554 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
5555 struct lpfc_nodelist *ndlp;
5557 spin_lock_irq(shost->host_lock);
5558 ndlp = __lpfc_findnode_rpi(vport, rpi);
5559 spin_unlock_irq(shost->host_lock);
5560 return ndlp;
5564 * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
5565 * @phba: pointer to lpfc hba data structure.
5566 * @vpi: the physical host virtual N_Port identifier.
5568 * This routine finds a vport on a HBA (referred by @phba) through a
5569 * @vpi. The function walks the HBA's vport list and returns the address
5570 * of the vport with the matching @vpi.
5572 * Return code
5573 * NULL - No vport with the matching @vpi found
5574 * Otherwise - Address to the vport with the matching @vpi.
5576 struct lpfc_vport *
5577 lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
5579 struct lpfc_vport *vport;
5580 unsigned long flags;
5581 int i = 0;
5583 /* The physical ports are always vpi 0 - translate is unnecessary. */
5584 if (vpi > 0) {
5586 * Translate the physical vpi to the logical vpi. The
5587 * vport stores the logical vpi.
5589 for (i = 0; i < phba->max_vpi; i++) {
5590 if (vpi == phba->vpi_ids[i])
5591 break;
5594 if (i >= phba->max_vpi) {
5595 lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
5596 "2936 Could not find Vport mapped "
5597 "to vpi %d\n", vpi);
5598 return NULL;
5602 spin_lock_irqsave(&phba->hbalock, flags);
5603 list_for_each_entry(vport, &phba->port_list, listentry) {
5604 if (vport->vpi == i) {
5605 spin_unlock_irqrestore(&phba->hbalock, flags);
5606 return vport;
5609 spin_unlock_irqrestore(&phba->hbalock, flags);
5610 return NULL;
5613 void
5614 lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
5615 uint32_t did)
5617 memset(ndlp, 0, sizeof (struct lpfc_nodelist));
5619 lpfc_initialize_node(vport, ndlp, did);
5620 INIT_LIST_HEAD(&ndlp->nlp_listp);
5621 if (vport->phba->sli_rev == LPFC_SLI_REV4)
5622 ndlp->nlp_rpi = lpfc_sli4_alloc_rpi(vport->phba);
5625 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE,
5626 "node init: did:x%x",
5627 ndlp->nlp_DID, 0, 0);
5629 return;
5632 /* This routine releases all resources associated with a specifc NPort's ndlp
5633 * and mempool_free's the nodelist.
5635 static void
5636 lpfc_nlp_release(struct kref *kref)
5638 struct lpfc_hba *phba;
5639 unsigned long flags;
5640 struct lpfc_nodelist *ndlp = container_of(kref, struct lpfc_nodelist,
5641 kref);
5643 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE,
5644 "node release: did:x%x flg:x%x type:x%x",
5645 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
5647 lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
5648 "0279 lpfc_nlp_release: ndlp:x%p did %x "
5649 "usgmap:x%x refcnt:%d\n",
5650 (void *)ndlp, ndlp->nlp_DID, ndlp->nlp_usg_map,
5651 atomic_read(&ndlp->kref.refcount));
5653 /* remove ndlp from action. */
5654 lpfc_nlp_remove(ndlp->vport, ndlp);
5656 /* clear the ndlp active flag for all release cases */
5657 phba = ndlp->phba;
5658 spin_lock_irqsave(&phba->ndlp_lock, flags);
5659 NLP_CLR_NODE_ACT(ndlp);
5660 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
5661 if (phba->sli_rev == LPFC_SLI_REV4)
5662 lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
5664 /* free ndlp memory for final ndlp release */
5665 if (NLP_CHK_FREE_REQ(ndlp)) {
5666 kfree(ndlp->lat_data);
5667 mempool_free(ndlp, ndlp->phba->nlp_mem_pool);
5671 /* This routine bumps the reference count for a ndlp structure to ensure
5672 * that one discovery thread won't free a ndlp while another discovery thread
5673 * is using it.
5675 struct lpfc_nodelist *
5676 lpfc_nlp_get(struct lpfc_nodelist *ndlp)
5678 struct lpfc_hba *phba;
5679 unsigned long flags;
5681 if (ndlp) {
5682 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE,
5683 "node get: did:x%x flg:x%x refcnt:x%x",
5684 ndlp->nlp_DID, ndlp->nlp_flag,
5685 atomic_read(&ndlp->kref.refcount));
5686 /* The check of ndlp usage to prevent incrementing the
5687 * ndlp reference count that is in the process of being
5688 * released.
5690 phba = ndlp->phba;
5691 spin_lock_irqsave(&phba->ndlp_lock, flags);
5692 if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) {
5693 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
5694 lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE,
5695 "0276 lpfc_nlp_get: ndlp:x%p "
5696 "usgmap:x%x refcnt:%d\n",
5697 (void *)ndlp, ndlp->nlp_usg_map,
5698 atomic_read(&ndlp->kref.refcount));
5699 return NULL;
5700 } else
5701 kref_get(&ndlp->kref);
5702 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
5704 return ndlp;
5707 /* This routine decrements the reference count for a ndlp structure. If the
5708 * count goes to 0, this indicates the the associated nodelist should be
5709 * freed. Returning 1 indicates the ndlp resource has been released; on the
5710 * other hand, returning 0 indicates the ndlp resource has not been released
5711 * yet.
5714 lpfc_nlp_put(struct lpfc_nodelist *ndlp)
5716 struct lpfc_hba *phba;
5717 unsigned long flags;
5719 if (!ndlp)
5720 return 1;
5722 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE,
5723 "node put: did:x%x flg:x%x refcnt:x%x",
5724 ndlp->nlp_DID, ndlp->nlp_flag,
5725 atomic_read(&ndlp->kref.refcount));
5726 phba = ndlp->phba;
5727 spin_lock_irqsave(&phba->ndlp_lock, flags);
5728 /* Check the ndlp memory free acknowledge flag to avoid the
5729 * possible race condition that kref_put got invoked again
5730 * after previous one has done ndlp memory free.
5732 if (NLP_CHK_FREE_ACK(ndlp)) {
5733 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
5734 lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE,
5735 "0274 lpfc_nlp_put: ndlp:x%p "
5736 "usgmap:x%x refcnt:%d\n",
5737 (void *)ndlp, ndlp->nlp_usg_map,
5738 atomic_read(&ndlp->kref.refcount));
5739 return 1;
5741 /* Check the ndlp inactivate log flag to avoid the possible
5742 * race condition that kref_put got invoked again after ndlp
5743 * is already in inactivating state.
5745 if (NLP_CHK_IACT_REQ(ndlp)) {
5746 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
5747 lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE,
5748 "0275 lpfc_nlp_put: ndlp:x%p "
5749 "usgmap:x%x refcnt:%d\n",
5750 (void *)ndlp, ndlp->nlp_usg_map,
5751 atomic_read(&ndlp->kref.refcount));
5752 return 1;
5754 /* For last put, mark the ndlp usage flags to make sure no
5755 * other kref_get and kref_put on the same ndlp shall get
5756 * in between the process when the final kref_put has been
5757 * invoked on this ndlp.
5759 if (atomic_read(&ndlp->kref.refcount) == 1) {
5760 /* Indicate ndlp is put to inactive state. */
5761 NLP_SET_IACT_REQ(ndlp);
5762 /* Acknowledge ndlp memory free has been seen. */
5763 if (NLP_CHK_FREE_REQ(ndlp))
5764 NLP_SET_FREE_ACK(ndlp);
5766 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
5767 /* Note, the kref_put returns 1 when decrementing a reference
5768 * count that was 1, it invokes the release callback function,
5769 * but it still left the reference count as 1 (not actually
5770 * performs the last decrementation). Otherwise, it actually
5771 * decrements the reference count and returns 0.
5773 return kref_put(&ndlp->kref, lpfc_nlp_release);
5776 /* This routine free's the specified nodelist if it is not in use
5777 * by any other discovery thread. This routine returns 1 if the
5778 * ndlp has been freed. A return value of 0 indicates the ndlp is
5779 * not yet been released.
5782 lpfc_nlp_not_used(struct lpfc_nodelist *ndlp)
5784 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE,
5785 "node not used: did:x%x flg:x%x refcnt:x%x",
5786 ndlp->nlp_DID, ndlp->nlp_flag,
5787 atomic_read(&ndlp->kref.refcount));
5788 if (atomic_read(&ndlp->kref.refcount) == 1)
5789 if (lpfc_nlp_put(ndlp))
5790 return 1;
5791 return 0;
5795 * lpfc_fcf_inuse - Check if FCF can be unregistered.
5796 * @phba: Pointer to hba context object.
5798 * This function iterate through all FC nodes associated
5799 * will all vports to check if there is any node with
5800 * fc_rports associated with it. If there is an fc_rport
5801 * associated with the node, then the node is either in
5802 * discovered state or its devloss_timer is pending.
5804 static int
5805 lpfc_fcf_inuse(struct lpfc_hba *phba)
5807 struct lpfc_vport **vports;
5808 int i, ret = 0;
5809 struct lpfc_nodelist *ndlp;
5810 struct Scsi_Host *shost;
5812 vports = lpfc_create_vport_work_array(phba);
5814 /* If driver cannot allocate memory, indicate fcf is in use */
5815 if (!vports)
5816 return 1;
5818 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
5819 shost = lpfc_shost_from_vport(vports[i]);
5820 spin_lock_irq(shost->host_lock);
5822 * IF the CVL_RCVD bit is not set then we have sent the
5823 * flogi.
5824 * If dev_loss fires while we are waiting we do not want to
5825 * unreg the fcf.
5827 if (!(vports[i]->fc_flag & FC_VPORT_CVL_RCVD)) {
5828 spin_unlock_irq(shost->host_lock);
5829 ret = 1;
5830 goto out;
5832 list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) {
5833 if (NLP_CHK_NODE_ACT(ndlp) && ndlp->rport &&
5834 (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) {
5835 ret = 1;
5836 spin_unlock_irq(shost->host_lock);
5837 goto out;
5838 } else if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
5839 ret = 1;
5840 lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
5841 "2624 RPI %x DID %x flag %x "
5842 "still logged in\n",
5843 ndlp->nlp_rpi, ndlp->nlp_DID,
5844 ndlp->nlp_flag);
5847 spin_unlock_irq(shost->host_lock);
5849 out:
5850 lpfc_destroy_vport_work_array(phba, vports);
5851 return ret;
5855 * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi.
5856 * @phba: Pointer to hba context object.
5857 * @mboxq: Pointer to mailbox object.
5859 * This function frees memory associated with the mailbox command.
5861 void
5862 lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
5864 struct lpfc_vport *vport = mboxq->vport;
5865 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
5867 if (mboxq->u.mb.mbxStatus) {
5868 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
5869 "2555 UNREG_VFI mbxStatus error x%x "
5870 "HBA state x%x\n",
5871 mboxq->u.mb.mbxStatus, vport->port_state);
5873 spin_lock_irq(shost->host_lock);
5874 phba->pport->fc_flag &= ~FC_VFI_REGISTERED;
5875 spin_unlock_irq(shost->host_lock);
5876 mempool_free(mboxq, phba->mbox_mem_pool);
5877 return;
5881 * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi.
5882 * @phba: Pointer to hba context object.
5883 * @mboxq: Pointer to mailbox object.
5885 * This function frees memory associated with the mailbox command.
5887 static void
5888 lpfc_unregister_fcfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
5890 struct lpfc_vport *vport = mboxq->vport;
5892 if (mboxq->u.mb.mbxStatus) {
5893 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
5894 "2550 UNREG_FCFI mbxStatus error x%x "
5895 "HBA state x%x\n",
5896 mboxq->u.mb.mbxStatus, vport->port_state);
5898 mempool_free(mboxq, phba->mbox_mem_pool);
5899 return;
5903 * lpfc_unregister_fcf_prep - Unregister fcf record preparation
5904 * @phba: Pointer to hba context object.
5906 * This function prepare the HBA for unregistering the currently registered
5907 * FCF from the HBA. It performs unregistering, in order, RPIs, VPIs, and
5908 * VFIs.
5911 lpfc_unregister_fcf_prep(struct lpfc_hba *phba)
5913 struct lpfc_vport **vports;
5914 struct lpfc_nodelist *ndlp;
5915 struct Scsi_Host *shost;
5916 int i = 0, rc;
5918 /* Unregister RPIs */
5919 if (lpfc_fcf_inuse(phba))
5920 lpfc_unreg_hba_rpis(phba);
5922 /* At this point, all discovery is aborted */
5923 phba->pport->port_state = LPFC_VPORT_UNKNOWN;
5925 /* Unregister VPIs */
5926 vports = lpfc_create_vport_work_array(phba);
5927 if (vports && (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
5928 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
5929 /* Stop FLOGI/FDISC retries */
5930 ndlp = lpfc_findnode_did(vports[i], Fabric_DID);
5931 if (ndlp)
5932 lpfc_cancel_retry_delay_tmo(vports[i], ndlp);
5933 lpfc_cleanup_pending_mbox(vports[i]);
5934 if (phba->sli_rev == LPFC_SLI_REV4)
5935 lpfc_sli4_unreg_all_rpis(vports[i]);
5936 lpfc_mbx_unreg_vpi(vports[i]);
5937 shost = lpfc_shost_from_vport(vports[i]);
5938 spin_lock_irq(shost->host_lock);
5939 vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
5940 vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
5941 spin_unlock_irq(shost->host_lock);
5943 lpfc_destroy_vport_work_array(phba, vports);
5944 if (i == 0 && (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))) {
5945 ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
5946 if (ndlp)
5947 lpfc_cancel_retry_delay_tmo(phba->pport, ndlp);
5948 lpfc_cleanup_pending_mbox(phba->pport);
5949 if (phba->sli_rev == LPFC_SLI_REV4)
5950 lpfc_sli4_unreg_all_rpis(phba->pport);
5951 lpfc_mbx_unreg_vpi(phba->pport);
5952 shost = lpfc_shost_from_vport(phba->pport);
5953 spin_lock_irq(shost->host_lock);
5954 phba->pport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
5955 phba->pport->vpi_state &= ~LPFC_VPI_REGISTERED;
5956 spin_unlock_irq(shost->host_lock);
5959 /* Cleanup any outstanding ELS commands */
5960 lpfc_els_flush_all_cmd(phba);
5962 /* Unregister the physical port VFI */
5963 rc = lpfc_issue_unreg_vfi(phba->pport);
5964 return rc;
5968 * lpfc_sli4_unregister_fcf - Unregister currently registered FCF record
5969 * @phba: Pointer to hba context object.
5971 * This function issues synchronous unregister FCF mailbox command to HBA to
5972 * unregister the currently registered FCF record. The driver does not reset
5973 * the driver FCF usage state flags.
5975 * Return 0 if successfully issued, none-zero otherwise.
5978 lpfc_sli4_unregister_fcf(struct lpfc_hba *phba)
5980 LPFC_MBOXQ_t *mbox;
5981 int rc;
5983 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
5984 if (!mbox) {
5985 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
5986 "2551 UNREG_FCFI mbox allocation failed"
5987 "HBA state x%x\n", phba->pport->port_state);
5988 return -ENOMEM;
5990 lpfc_unreg_fcfi(mbox, phba->fcf.fcfi);
5991 mbox->vport = phba->pport;
5992 mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl;
5993 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
5995 if (rc == MBX_NOT_FINISHED) {
5996 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
5997 "2552 Unregister FCFI command failed rc x%x "
5998 "HBA state x%x\n",
5999 rc, phba->pport->port_state);
6000 return -EINVAL;
6002 return 0;
6006 * lpfc_unregister_fcf_rescan - Unregister currently registered fcf and rescan
6007 * @phba: Pointer to hba context object.
6009 * This function unregisters the currently reigstered FCF. This function
6010 * also tries to find another FCF for discovery by rescan the HBA FCF table.
6012 void
6013 lpfc_unregister_fcf_rescan(struct lpfc_hba *phba)
6015 int rc;
6017 /* Preparation for unregistering fcf */
6018 rc = lpfc_unregister_fcf_prep(phba);
6019 if (rc) {
6020 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
6021 "2748 Failed to prepare for unregistering "
6022 "HBA's FCF record: rc=%d\n", rc);
6023 return;
6026 /* Now, unregister FCF record and reset HBA FCF state */
6027 rc = lpfc_sli4_unregister_fcf(phba);
6028 if (rc)
6029 return;
6030 /* Reset HBA FCF states after successful unregister FCF */
6031 phba->fcf.fcf_flag = 0;
6032 phba->fcf.current_rec.flag = 0;
6035 * If driver is not unloading, check if there is any other
6036 * FCF record that can be used for discovery.
6038 if ((phba->pport->load_flag & FC_UNLOADING) ||
6039 (phba->link_state < LPFC_LINK_UP))
6040 return;
6042 /* This is considered as the initial FCF discovery scan */
6043 spin_lock_irq(&phba->hbalock);
6044 phba->fcf.fcf_flag |= FCF_INIT_DISC;
6045 spin_unlock_irq(&phba->hbalock);
6047 /* Reset FCF roundrobin bmask for new discovery */
6048 lpfc_sli4_clear_fcf_rr_bmask(phba);
6050 rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST);
6052 if (rc) {
6053 spin_lock_irq(&phba->hbalock);
6054 phba->fcf.fcf_flag &= ~FCF_INIT_DISC;
6055 spin_unlock_irq(&phba->hbalock);
6056 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
6057 "2553 lpfc_unregister_unused_fcf failed "
6058 "to read FCF record HBA state x%x\n",
6059 phba->pport->port_state);
6064 * lpfc_unregister_fcf - Unregister the currently registered fcf record
6065 * @phba: Pointer to hba context object.
6067 * This function just unregisters the currently reigstered FCF. It does not
6068 * try to find another FCF for discovery.
6070 void
6071 lpfc_unregister_fcf(struct lpfc_hba *phba)
6073 int rc;
6075 /* Preparation for unregistering fcf */
6076 rc = lpfc_unregister_fcf_prep(phba);
6077 if (rc) {
6078 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
6079 "2749 Failed to prepare for unregistering "
6080 "HBA's FCF record: rc=%d\n", rc);
6081 return;
6084 /* Now, unregister FCF record and reset HBA FCF state */
6085 rc = lpfc_sli4_unregister_fcf(phba);
6086 if (rc)
6087 return;
6088 /* Set proper HBA FCF states after successful unregister FCF */
6089 spin_lock_irq(&phba->hbalock);
6090 phba->fcf.fcf_flag &= ~FCF_REGISTERED;
6091 spin_unlock_irq(&phba->hbalock);
6095 * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected.
6096 * @phba: Pointer to hba context object.
6098 * This function check if there are any connected remote port for the FCF and
6099 * if all the devices are disconnected, this function unregister FCFI.
6100 * This function also tries to use another FCF for discovery.
6102 void
6103 lpfc_unregister_unused_fcf(struct lpfc_hba *phba)
6106 * If HBA is not running in FIP mode, if HBA does not support
6107 * FCoE, if FCF discovery is ongoing, or if FCF has not been
6108 * registered, do nothing.
6110 spin_lock_irq(&phba->hbalock);
6111 if (!(phba->hba_flag & HBA_FCOE_MODE) ||
6112 !(phba->fcf.fcf_flag & FCF_REGISTERED) ||
6113 !(phba->hba_flag & HBA_FIP_SUPPORT) ||
6114 (phba->fcf.fcf_flag & FCF_DISCOVERY) ||
6115 (phba->pport->port_state == LPFC_FLOGI)) {
6116 spin_unlock_irq(&phba->hbalock);
6117 return;
6119 spin_unlock_irq(&phba->hbalock);
6121 if (lpfc_fcf_inuse(phba))
6122 return;
6124 lpfc_unregister_fcf_rescan(phba);
6128 * lpfc_read_fcf_conn_tbl - Create driver FCF connection table.
6129 * @phba: Pointer to hba context object.
6130 * @buff: Buffer containing the FCF connection table as in the config
6131 * region.
6132 * This function create driver data structure for the FCF connection
6133 * record table read from config region 23.
6135 static void
6136 lpfc_read_fcf_conn_tbl(struct lpfc_hba *phba,
6137 uint8_t *buff)
6139 struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
6140 struct lpfc_fcf_conn_hdr *conn_hdr;
6141 struct lpfc_fcf_conn_rec *conn_rec;
6142 uint32_t record_count;
6143 int i;
6145 /* Free the current connect table */
6146 list_for_each_entry_safe(conn_entry, next_conn_entry,
6147 &phba->fcf_conn_rec_list, list) {
6148 list_del_init(&conn_entry->list);
6149 kfree(conn_entry);
6152 conn_hdr = (struct lpfc_fcf_conn_hdr *) buff;
6153 record_count = conn_hdr->length * sizeof(uint32_t)/
6154 sizeof(struct lpfc_fcf_conn_rec);
6156 conn_rec = (struct lpfc_fcf_conn_rec *)
6157 (buff + sizeof(struct lpfc_fcf_conn_hdr));
6159 for (i = 0; i < record_count; i++) {
6160 if (!(conn_rec[i].flags & FCFCNCT_VALID))
6161 continue;
6162 conn_entry = kzalloc(sizeof(struct lpfc_fcf_conn_entry),
6163 GFP_KERNEL);
6164 if (!conn_entry) {
6165 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
6166 "2566 Failed to allocate connection"
6167 " table entry\n");
6168 return;
6171 memcpy(&conn_entry->conn_rec, &conn_rec[i],
6172 sizeof(struct lpfc_fcf_conn_rec));
6173 conn_entry->conn_rec.vlan_tag =
6174 conn_entry->conn_rec.vlan_tag;
6175 conn_entry->conn_rec.flags =
6176 conn_entry->conn_rec.flags;
6177 list_add_tail(&conn_entry->list,
6178 &phba->fcf_conn_rec_list);
6181 if (!list_empty(&phba->fcf_conn_rec_list)) {
6182 i = 0;
6183 list_for_each_entry(conn_entry, &phba->fcf_conn_rec_list,
6184 list) {
6185 conn_rec = &conn_entry->conn_rec;
6186 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
6187 "3345 FCF connection list rec[%02d]: "
6188 "flags:x%04x, vtag:x%04x, "
6189 "fabric_name:x%02x:%02x:%02x:%02x:"
6190 "%02x:%02x:%02x:%02x, "
6191 "switch_name:x%02x:%02x:%02x:%02x:"
6192 "%02x:%02x:%02x:%02x\n", i++,
6193 conn_rec->flags, conn_rec->vlan_tag,
6194 conn_rec->fabric_name[0],
6195 conn_rec->fabric_name[1],
6196 conn_rec->fabric_name[2],
6197 conn_rec->fabric_name[3],
6198 conn_rec->fabric_name[4],
6199 conn_rec->fabric_name[5],
6200 conn_rec->fabric_name[6],
6201 conn_rec->fabric_name[7],
6202 conn_rec->switch_name[0],
6203 conn_rec->switch_name[1],
6204 conn_rec->switch_name[2],
6205 conn_rec->switch_name[3],
6206 conn_rec->switch_name[4],
6207 conn_rec->switch_name[5],
6208 conn_rec->switch_name[6],
6209 conn_rec->switch_name[7]);
6215 * lpfc_read_fcoe_param - Read FCoe parameters from conf region..
6216 * @phba: Pointer to hba context object.
6217 * @buff: Buffer containing the FCoE parameter data structure.
6219 * This function update driver data structure with config
6220 * parameters read from config region 23.
6222 static void
6223 lpfc_read_fcoe_param(struct lpfc_hba *phba,
6224 uint8_t *buff)
6226 struct lpfc_fip_param_hdr *fcoe_param_hdr;
6227 struct lpfc_fcoe_params *fcoe_param;
6229 fcoe_param_hdr = (struct lpfc_fip_param_hdr *)
6230 buff;
6231 fcoe_param = (struct lpfc_fcoe_params *)
6232 (buff + sizeof(struct lpfc_fip_param_hdr));
6234 if ((fcoe_param_hdr->parm_version != FIPP_VERSION) ||
6235 (fcoe_param_hdr->length != FCOE_PARAM_LENGTH))
6236 return;
6238 if (fcoe_param_hdr->parm_flags & FIPP_VLAN_VALID) {
6239 phba->valid_vlan = 1;
6240 phba->vlan_id = le16_to_cpu(fcoe_param->vlan_tag) &
6241 0xFFF;
6244 phba->fc_map[0] = fcoe_param->fc_map[0];
6245 phba->fc_map[1] = fcoe_param->fc_map[1];
6246 phba->fc_map[2] = fcoe_param->fc_map[2];
6247 return;
6251 * lpfc_get_rec_conf23 - Get a record type in config region data.
6252 * @buff: Buffer containing config region 23 data.
6253 * @size: Size of the data buffer.
6254 * @rec_type: Record type to be searched.
6256 * This function searches config region data to find the beginning
6257 * of the record specified by record_type. If record found, this
6258 * function return pointer to the record else return NULL.
6260 static uint8_t *
6261 lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type)
6263 uint32_t offset = 0, rec_length;
6265 if ((buff[0] == LPFC_REGION23_LAST_REC) ||
6266 (size < sizeof(uint32_t)))
6267 return NULL;
6269 rec_length = buff[offset + 1];
6272 * One TLV record has one word header and number of data words
6273 * specified in the rec_length field of the record header.
6275 while ((offset + rec_length * sizeof(uint32_t) + sizeof(uint32_t))
6276 <= size) {
6277 if (buff[offset] == rec_type)
6278 return &buff[offset];
6280 if (buff[offset] == LPFC_REGION23_LAST_REC)
6281 return NULL;
6283 offset += rec_length * sizeof(uint32_t) + sizeof(uint32_t);
6284 rec_length = buff[offset + 1];
6286 return NULL;
6290 * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23.
6291 * @phba: Pointer to lpfc_hba data structure.
6292 * @buff: Buffer containing config region 23 data.
6293 * @size: Size of the data buffer.
6295 * This function parses the FCoE config parameters in config region 23 and
6296 * populate driver data structure with the parameters.
6298 void
6299 lpfc_parse_fcoe_conf(struct lpfc_hba *phba,
6300 uint8_t *buff,
6301 uint32_t size)
6303 uint32_t offset = 0, rec_length;
6304 uint8_t *rec_ptr;
6307 * If data size is less than 2 words signature and version cannot be
6308 * verified.
6310 if (size < 2*sizeof(uint32_t))
6311 return;
6313 /* Check the region signature first */
6314 if (memcmp(buff, LPFC_REGION23_SIGNATURE, 4)) {
6315 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
6316 "2567 Config region 23 has bad signature\n");
6317 return;
6320 offset += 4;
6322 /* Check the data structure version */
6323 if (buff[offset] != LPFC_REGION23_VERSION) {
6324 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
6325 "2568 Config region 23 has bad version\n");
6326 return;
6328 offset += 4;
6330 rec_length = buff[offset + 1];
6332 /* Read FCoE param record */
6333 rec_ptr = lpfc_get_rec_conf23(&buff[offset],
6334 size - offset, FCOE_PARAM_TYPE);
6335 if (rec_ptr)
6336 lpfc_read_fcoe_param(phba, rec_ptr);
6338 /* Read FCF connection table */
6339 rec_ptr = lpfc_get_rec_conf23(&buff[offset],
6340 size - offset, FCOE_CONN_TBL_TYPE);
6341 if (rec_ptr)
6342 lpfc_read_fcf_conn_tbl(phba, rec_ptr);