PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / scsi / pm8001 / pm8001_sas.c
blobf50ac44b950e5f0fbd12772689a03c5aaebfea87
1 /*
2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
4 * Copyright (c) 2008-2009 USI Co., Ltd.
5 * All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
26 * NO WARRANTY
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
41 #include <linux/slab.h>
42 #include "pm8001_sas.h"
44 /**
45 * pm8001_find_tag - from sas task to find out tag that belongs to this task
46 * @task: the task sent to the LLDD
47 * @tag: the found tag associated with the task
49 static int pm8001_find_tag(struct sas_task *task, u32 *tag)
51 if (task->lldd_task) {
52 struct pm8001_ccb_info *ccb;
53 ccb = task->lldd_task;
54 *tag = ccb->ccb_tag;
55 return 1;
57 return 0;
60 /**
61 * pm8001_tag_clear - clear the tags bitmap
62 * @pm8001_ha: our hba struct
63 * @tag: the found tag associated with the task
65 static void pm8001_tag_clear(struct pm8001_hba_info *pm8001_ha, u32 tag)
67 void *bitmap = pm8001_ha->tags;
68 clear_bit(tag, bitmap);
71 void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
73 pm8001_tag_clear(pm8001_ha, tag);
76 static void pm8001_tag_set(struct pm8001_hba_info *pm8001_ha, u32 tag)
78 void *bitmap = pm8001_ha->tags;
79 set_bit(tag, bitmap);
82 /**
83 * pm8001_tag_alloc - allocate a empty tag for task used.
84 * @pm8001_ha: our hba struct
85 * @tag_out: the found empty tag .
87 inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
89 unsigned int index, tag;
90 void *bitmap = pm8001_ha->tags;
92 index = find_first_zero_bit(bitmap, pm8001_ha->tags_num);
93 tag = index;
94 if (tag >= pm8001_ha->tags_num)
95 return -SAS_QUEUE_FULL;
96 pm8001_tag_set(pm8001_ha, tag);
97 *tag_out = tag;
98 return 0;
101 void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha)
103 int i;
104 for (i = 0; i < pm8001_ha->tags_num; ++i)
105 pm8001_tag_clear(pm8001_ha, i);
109 * pm8001_mem_alloc - allocate memory for pm8001.
110 * @pdev: pci device.
111 * @virt_addr: the allocated virtual address
112 * @pphys_addr_hi: the physical address high byte address.
113 * @pphys_addr_lo: the physical address low byte address.
114 * @mem_size: memory size.
116 int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
117 dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
118 u32 *pphys_addr_lo, u32 mem_size, u32 align)
120 caddr_t mem_virt_alloc;
121 dma_addr_t mem_dma_handle;
122 u64 phys_align;
123 u64 align_offset = 0;
124 if (align)
125 align_offset = (dma_addr_t)align - 1;
126 mem_virt_alloc =
127 pci_alloc_consistent(pdev, mem_size + align, &mem_dma_handle);
128 if (!mem_virt_alloc) {
129 pm8001_printk("memory allocation error\n");
130 return -1;
132 memset((void *)mem_virt_alloc, 0, mem_size+align);
133 *pphys_addr = mem_dma_handle;
134 phys_align = (*pphys_addr + align_offset) & ~align_offset;
135 *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
136 *pphys_addr_hi = upper_32_bits(phys_align);
137 *pphys_addr_lo = lower_32_bits(phys_align);
138 return 0;
141 * pm8001_find_ha_by_dev - from domain device which come from sas layer to
142 * find out our hba struct.
143 * @dev: the domain device which from sas layer.
145 static
146 struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
148 struct sas_ha_struct *sha = dev->port->ha;
149 struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
150 return pm8001_ha;
154 * pm8001_phy_control - this function should be registered to
155 * sas_domain_function_template to provide libsas used, note: this is just
156 * control the HBA phy rather than other expander phy if you want control
157 * other phy, you should use SMP command.
158 * @sas_phy: which phy in HBA phys.
159 * @func: the operation.
160 * @funcdata: always NULL.
162 int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
163 void *funcdata)
165 int rc = 0, phy_id = sas_phy->id;
166 struct pm8001_hba_info *pm8001_ha = NULL;
167 struct sas_phy_linkrates *rates;
168 DECLARE_COMPLETION_ONSTACK(completion);
169 unsigned long flags;
170 pm8001_ha = sas_phy->ha->lldd_ha;
171 pm8001_ha->phy[phy_id].enable_completion = &completion;
172 switch (func) {
173 case PHY_FUNC_SET_LINK_RATE:
174 rates = funcdata;
175 if (rates->minimum_linkrate) {
176 pm8001_ha->phy[phy_id].minimum_linkrate =
177 rates->minimum_linkrate;
179 if (rates->maximum_linkrate) {
180 pm8001_ha->phy[phy_id].maximum_linkrate =
181 rates->maximum_linkrate;
183 if (pm8001_ha->phy[phy_id].phy_state == 0) {
184 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
185 wait_for_completion(&completion);
187 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
188 PHY_LINK_RESET);
189 break;
190 case PHY_FUNC_HARD_RESET:
191 if (pm8001_ha->phy[phy_id].phy_state == 0) {
192 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
193 wait_for_completion(&completion);
195 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
196 PHY_HARD_RESET);
197 break;
198 case PHY_FUNC_LINK_RESET:
199 if (pm8001_ha->phy[phy_id].phy_state == 0) {
200 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
201 wait_for_completion(&completion);
203 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
204 PHY_LINK_RESET);
205 break;
206 case PHY_FUNC_RELEASE_SPINUP_HOLD:
207 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
208 PHY_LINK_RESET);
209 break;
210 case PHY_FUNC_DISABLE:
211 PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
212 break;
213 case PHY_FUNC_GET_EVENTS:
214 spin_lock_irqsave(&pm8001_ha->lock, flags);
215 if (pm8001_ha->chip_id == chip_8001) {
216 if (-1 == pm8001_bar4_shift(pm8001_ha,
217 (phy_id < 4) ? 0x30000 : 0x40000)) {
218 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
219 return -EINVAL;
223 struct sas_phy *phy = sas_phy->phy;
224 uint32_t *qp = (uint32_t *)(((char *)
225 pm8001_ha->io_mem[2].memvirtaddr)
226 + 0x1034 + (0x4000 * (phy_id & 3)));
228 phy->invalid_dword_count = qp[0];
229 phy->running_disparity_error_count = qp[1];
230 phy->loss_of_dword_sync_count = qp[3];
231 phy->phy_reset_problem_count = qp[4];
233 if (pm8001_ha->chip_id == chip_8001)
234 pm8001_bar4_shift(pm8001_ha, 0);
235 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
236 return 0;
237 default:
238 rc = -EOPNOTSUPP;
240 msleep(300);
241 return rc;
245 * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
246 * command to HBA.
247 * @shost: the scsi host data.
249 void pm8001_scan_start(struct Scsi_Host *shost)
251 int i;
252 struct pm8001_hba_info *pm8001_ha;
253 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
254 pm8001_ha = sha->lldd_ha;
255 /* SAS_RE_INITIALIZATION not available in SPCv/ve */
256 if (pm8001_ha->chip_id == chip_8001)
257 PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
258 for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
259 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
262 int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
264 struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
266 /* give the phy enabling interrupt event time to come in (1s
267 * is empirically about all it takes) */
268 if (time < HZ)
269 return 0;
270 /* Wait for discovery to finish */
271 sas_drain_work(ha);
272 return 1;
276 * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
277 * @pm8001_ha: our hba card information
278 * @ccb: the ccb which attached to smp task
280 static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
281 struct pm8001_ccb_info *ccb)
283 return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
286 u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
288 struct ata_queued_cmd *qc = task->uldd_task;
289 if (qc) {
290 if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
291 qc->tf.command == ATA_CMD_FPDMA_READ) {
292 *tag = qc->tag;
293 return 1;
296 return 0;
300 * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
301 * @pm8001_ha: our hba card information
302 * @ccb: the ccb which attached to sata task
304 static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
305 struct pm8001_ccb_info *ccb)
307 return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
311 * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
312 * @pm8001_ha: our hba card information
313 * @ccb: the ccb which attached to TM
314 * @tmf: the task management IU
316 static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
317 struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
319 return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
323 * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
324 * @pm8001_ha: our hba card information
325 * @ccb: the ccb which attached to ssp task
327 static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
328 struct pm8001_ccb_info *ccb)
330 return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
333 /* Find the local port id that's attached to this device */
334 static int sas_find_local_port_id(struct domain_device *dev)
336 struct domain_device *pdev = dev->parent;
338 /* Directly attached device */
339 if (!pdev)
340 return dev->port->id;
341 while (pdev) {
342 struct domain_device *pdev_p = pdev->parent;
343 if (!pdev_p)
344 return pdev->port->id;
345 pdev = pdev->parent;
347 return 0;
351 * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
352 * @task: the task to be execute.
353 * @num: if can_queue great than 1, the task can be queued up. for SMP task,
354 * we always execute one one time.
355 * @gfp_flags: gfp_flags.
356 * @is_tmf: if it is task management task.
357 * @tmf: the task management IU
359 #define DEV_IS_GONE(pm8001_dev) \
360 ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
361 static int pm8001_task_exec(struct sas_task *task, const int num,
362 gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
364 struct domain_device *dev = task->dev;
365 struct pm8001_hba_info *pm8001_ha;
366 struct pm8001_device *pm8001_dev;
367 struct pm8001_port *port = NULL;
368 struct sas_task *t = task;
369 struct pm8001_ccb_info *ccb;
370 u32 tag = 0xdeadbeef, rc, n_elem = 0;
371 u32 n = num;
372 unsigned long flags = 0;
374 if (!dev->port) {
375 struct task_status_struct *tsm = &t->task_status;
376 tsm->resp = SAS_TASK_UNDELIVERED;
377 tsm->stat = SAS_PHY_DOWN;
378 if (dev->dev_type != SAS_SATA_DEV)
379 t->task_done(t);
380 return 0;
382 pm8001_ha = pm8001_find_ha_by_dev(task->dev);
383 PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
384 spin_lock_irqsave(&pm8001_ha->lock, flags);
385 do {
386 dev = t->dev;
387 pm8001_dev = dev->lldd_dev;
388 port = &pm8001_ha->port[sas_find_local_port_id(dev)];
389 if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) {
390 if (sas_protocol_ata(t->task_proto)) {
391 struct task_status_struct *ts = &t->task_status;
392 ts->resp = SAS_TASK_UNDELIVERED;
393 ts->stat = SAS_PHY_DOWN;
395 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
396 t->task_done(t);
397 spin_lock_irqsave(&pm8001_ha->lock, flags);
398 if (n > 1)
399 t = list_entry(t->list.next,
400 struct sas_task, list);
401 continue;
402 } else {
403 struct task_status_struct *ts = &t->task_status;
404 ts->resp = SAS_TASK_UNDELIVERED;
405 ts->stat = SAS_PHY_DOWN;
406 t->task_done(t);
407 if (n > 1)
408 t = list_entry(t->list.next,
409 struct sas_task, list);
410 continue;
413 rc = pm8001_tag_alloc(pm8001_ha, &tag);
414 if (rc)
415 goto err_out;
416 ccb = &pm8001_ha->ccb_info[tag];
418 if (!sas_protocol_ata(t->task_proto)) {
419 if (t->num_scatter) {
420 n_elem = dma_map_sg(pm8001_ha->dev,
421 t->scatter,
422 t->num_scatter,
423 t->data_dir);
424 if (!n_elem) {
425 rc = -ENOMEM;
426 goto err_out_tag;
429 } else {
430 n_elem = t->num_scatter;
433 t->lldd_task = ccb;
434 ccb->n_elem = n_elem;
435 ccb->ccb_tag = tag;
436 ccb->task = t;
437 switch (t->task_proto) {
438 case SAS_PROTOCOL_SMP:
439 rc = pm8001_task_prep_smp(pm8001_ha, ccb);
440 break;
441 case SAS_PROTOCOL_SSP:
442 if (is_tmf)
443 rc = pm8001_task_prep_ssp_tm(pm8001_ha,
444 ccb, tmf);
445 else
446 rc = pm8001_task_prep_ssp(pm8001_ha, ccb);
447 break;
448 case SAS_PROTOCOL_SATA:
449 case SAS_PROTOCOL_STP:
450 rc = pm8001_task_prep_ata(pm8001_ha, ccb);
451 break;
452 default:
453 dev_printk(KERN_ERR, pm8001_ha->dev,
454 "unknown sas_task proto: 0x%x\n",
455 t->task_proto);
456 rc = -EINVAL;
457 break;
460 if (rc) {
461 PM8001_IO_DBG(pm8001_ha,
462 pm8001_printk("rc is %x\n", rc));
463 goto err_out_tag;
465 /* TODO: select normal or high priority */
466 spin_lock(&t->task_state_lock);
467 t->task_state_flags |= SAS_TASK_AT_INITIATOR;
468 spin_unlock(&t->task_state_lock);
469 pm8001_dev->running_req++;
470 if (n > 1)
471 t = list_entry(t->list.next, struct sas_task, list);
472 } while (--n);
473 rc = 0;
474 goto out_done;
476 err_out_tag:
477 pm8001_tag_free(pm8001_ha, tag);
478 err_out:
479 dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
480 if (!sas_protocol_ata(t->task_proto))
481 if (n_elem)
482 dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem,
483 t->data_dir);
484 out_done:
485 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
486 return rc;
490 * pm8001_queue_command - register for upper layer used, all IO commands sent
491 * to HBA are from this interface.
492 * @task: the task to be execute.
493 * @num: if can_queue great than 1, the task can be queued up. for SMP task,
494 * we always execute one one time
495 * @gfp_flags: gfp_flags
497 int pm8001_queue_command(struct sas_task *task, const int num,
498 gfp_t gfp_flags)
500 return pm8001_task_exec(task, num, gfp_flags, 0, NULL);
503 void pm8001_ccb_free(struct pm8001_hba_info *pm8001_ha, u32 ccb_idx)
505 pm8001_tag_clear(pm8001_ha, ccb_idx);
509 * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
510 * @pm8001_ha: our hba card information
511 * @ccb: the ccb which attached to ssp task
512 * @task: the task to be free.
513 * @ccb_idx: ccb index.
515 void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
516 struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx)
518 if (!ccb->task)
519 return;
520 if (!sas_protocol_ata(task->task_proto))
521 if (ccb->n_elem)
522 dma_unmap_sg(pm8001_ha->dev, task->scatter,
523 task->num_scatter, task->data_dir);
525 switch (task->task_proto) {
526 case SAS_PROTOCOL_SMP:
527 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
528 PCI_DMA_FROMDEVICE);
529 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
530 PCI_DMA_TODEVICE);
531 break;
533 case SAS_PROTOCOL_SATA:
534 case SAS_PROTOCOL_STP:
535 case SAS_PROTOCOL_SSP:
536 default:
537 /* do nothing */
538 break;
540 task->lldd_task = NULL;
541 ccb->task = NULL;
542 ccb->ccb_tag = 0xFFFFFFFF;
543 ccb->open_retry = 0;
544 pm8001_ccb_free(pm8001_ha, ccb_idx);
548 * pm8001_alloc_dev - find a empty pm8001_device
549 * @pm8001_ha: our hba card information
551 struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
553 u32 dev;
554 for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
555 if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
556 pm8001_ha->devices[dev].id = dev;
557 return &pm8001_ha->devices[dev];
560 if (dev == PM8001_MAX_DEVICES) {
561 PM8001_FAIL_DBG(pm8001_ha,
562 pm8001_printk("max support %d devices, ignore ..\n",
563 PM8001_MAX_DEVICES));
565 return NULL;
568 * pm8001_find_dev - find a matching pm8001_device
569 * @pm8001_ha: our hba card information
571 struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
572 u32 device_id)
574 u32 dev;
575 for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
576 if (pm8001_ha->devices[dev].device_id == device_id)
577 return &pm8001_ha->devices[dev];
579 if (dev == PM8001_MAX_DEVICES) {
580 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("NO MATCHING "
581 "DEVICE FOUND !!!\n"));
583 return NULL;
586 static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
588 u32 id = pm8001_dev->id;
589 memset(pm8001_dev, 0, sizeof(*pm8001_dev));
590 pm8001_dev->id = id;
591 pm8001_dev->dev_type = SAS_PHY_UNUSED;
592 pm8001_dev->device_id = PM8001_MAX_DEVICES;
593 pm8001_dev->sas_device = NULL;
597 * pm8001_dev_found_notify - libsas notify a device is found.
598 * @dev: the device structure which sas layer used.
600 * when libsas find a sas domain device, it should tell the LLDD that
601 * device is found, and then LLDD register this device to HBA firmware
602 * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
603 * device ID(according to device's sas address) and returned it to LLDD. From
604 * now on, we communicate with HBA FW with the device ID which HBA assigned
605 * rather than sas address. it is the necessary step for our HBA but it is
606 * the optional for other HBA driver.
608 static int pm8001_dev_found_notify(struct domain_device *dev)
610 unsigned long flags = 0;
611 int res = 0;
612 struct pm8001_hba_info *pm8001_ha = NULL;
613 struct domain_device *parent_dev = dev->parent;
614 struct pm8001_device *pm8001_device;
615 DECLARE_COMPLETION_ONSTACK(completion);
616 u32 flag = 0;
617 pm8001_ha = pm8001_find_ha_by_dev(dev);
618 spin_lock_irqsave(&pm8001_ha->lock, flags);
620 pm8001_device = pm8001_alloc_dev(pm8001_ha);
621 if (!pm8001_device) {
622 res = -1;
623 goto found_out;
625 pm8001_device->sas_device = dev;
626 dev->lldd_dev = pm8001_device;
627 pm8001_device->dev_type = dev->dev_type;
628 pm8001_device->dcompletion = &completion;
629 if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
630 int phy_id;
631 struct ex_phy *phy;
632 for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
633 phy_id++) {
634 phy = &parent_dev->ex_dev.ex_phy[phy_id];
635 if (SAS_ADDR(phy->attached_sas_addr)
636 == SAS_ADDR(dev->sas_addr)) {
637 pm8001_device->attached_phy = phy_id;
638 break;
641 if (phy_id == parent_dev->ex_dev.num_phys) {
642 PM8001_FAIL_DBG(pm8001_ha,
643 pm8001_printk("Error: no attached dev:%016llx"
644 " at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
645 SAS_ADDR(parent_dev->sas_addr)));
646 res = -1;
648 } else {
649 if (dev->dev_type == SAS_SATA_DEV) {
650 pm8001_device->attached_phy =
651 dev->rphy->identify.phy_identifier;
652 flag = 1; /* directly sata*/
654 } /*register this device to HBA*/
655 PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
656 PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
657 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
658 wait_for_completion(&completion);
659 if (dev->dev_type == SAS_END_DEVICE)
660 msleep(50);
661 pm8001_ha->flags = PM8001F_RUN_TIME;
662 return 0;
663 found_out:
664 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
665 return res;
668 int pm8001_dev_found(struct domain_device *dev)
670 return pm8001_dev_found_notify(dev);
673 void pm8001_task_done(struct sas_task *task)
675 if (!del_timer(&task->slow_task->timer))
676 return;
677 complete(&task->slow_task->completion);
680 static void pm8001_tmf_timedout(unsigned long data)
682 struct sas_task *task = (struct sas_task *)data;
684 task->task_state_flags |= SAS_TASK_STATE_ABORTED;
685 complete(&task->slow_task->completion);
688 #define PM8001_TASK_TIMEOUT 20
690 * pm8001_exec_internal_tmf_task - execute some task management commands.
691 * @dev: the wanted device.
692 * @tmf: which task management wanted to be take.
693 * @para_len: para_len.
694 * @parameter: ssp task parameter.
696 * when errors or exception happened, we may want to do something, for example
697 * abort the issued task which result in this execption, it is done by calling
698 * this function, note it is also with the task execute interface.
700 static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
701 void *parameter, u32 para_len, struct pm8001_tmf_task *tmf)
703 int res, retry;
704 struct sas_task *task = NULL;
705 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
706 struct pm8001_device *pm8001_dev = dev->lldd_dev;
707 DECLARE_COMPLETION_ONSTACK(completion_setstate);
709 for (retry = 0; retry < 3; retry++) {
710 task = sas_alloc_slow_task(GFP_KERNEL);
711 if (!task)
712 return -ENOMEM;
714 task->dev = dev;
715 task->task_proto = dev->tproto;
716 memcpy(&task->ssp_task, parameter, para_len);
717 task->task_done = pm8001_task_done;
718 task->slow_task->timer.data = (unsigned long)task;
719 task->slow_task->timer.function = pm8001_tmf_timedout;
720 task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
721 add_timer(&task->slow_task->timer);
723 res = pm8001_task_exec(task, 1, GFP_KERNEL, 1, tmf);
725 if (res) {
726 del_timer(&task->slow_task->timer);
727 PM8001_FAIL_DBG(pm8001_ha,
728 pm8001_printk("Executing internal task "
729 "failed\n"));
730 goto ex_err;
732 wait_for_completion(&task->slow_task->completion);
733 if (pm8001_ha->chip_id != chip_8001) {
734 pm8001_dev->setds_completion = &completion_setstate;
735 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
736 pm8001_dev, 0x01);
737 wait_for_completion(&completion_setstate);
739 res = -TMF_RESP_FUNC_FAILED;
740 /* Even TMF timed out, return direct. */
741 if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
742 if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
743 PM8001_FAIL_DBG(pm8001_ha,
744 pm8001_printk("TMF task[%x]timeout.\n",
745 tmf->tmf));
746 goto ex_err;
750 if (task->task_status.resp == SAS_TASK_COMPLETE &&
751 task->task_status.stat == SAM_STAT_GOOD) {
752 res = TMF_RESP_FUNC_COMPLETE;
753 break;
756 if (task->task_status.resp == SAS_TASK_COMPLETE &&
757 task->task_status.stat == SAS_DATA_UNDERRUN) {
758 /* no error, but return the number of bytes of
759 * underrun */
760 res = task->task_status.residual;
761 break;
764 if (task->task_status.resp == SAS_TASK_COMPLETE &&
765 task->task_status.stat == SAS_DATA_OVERRUN) {
766 PM8001_FAIL_DBG(pm8001_ha,
767 pm8001_printk("Blocked task error.\n"));
768 res = -EMSGSIZE;
769 break;
770 } else {
771 PM8001_EH_DBG(pm8001_ha,
772 pm8001_printk(" Task to dev %016llx response:"
773 "0x%x status 0x%x\n",
774 SAS_ADDR(dev->sas_addr),
775 task->task_status.resp,
776 task->task_status.stat));
777 sas_free_task(task);
778 task = NULL;
781 ex_err:
782 BUG_ON(retry == 3 && task != NULL);
783 sas_free_task(task);
784 return res;
787 static int
788 pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
789 struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag,
790 u32 task_tag)
792 int res, retry;
793 u32 ccb_tag;
794 struct pm8001_ccb_info *ccb;
795 struct sas_task *task = NULL;
797 for (retry = 0; retry < 3; retry++) {
798 task = sas_alloc_slow_task(GFP_KERNEL);
799 if (!task)
800 return -ENOMEM;
802 task->dev = dev;
803 task->task_proto = dev->tproto;
804 task->task_done = pm8001_task_done;
805 task->slow_task->timer.data = (unsigned long)task;
806 task->slow_task->timer.function = pm8001_tmf_timedout;
807 task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
808 add_timer(&task->slow_task->timer);
810 res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
811 if (res)
812 return res;
813 ccb = &pm8001_ha->ccb_info[ccb_tag];
814 ccb->device = pm8001_dev;
815 ccb->ccb_tag = ccb_tag;
816 ccb->task = task;
818 res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
819 pm8001_dev, flag, task_tag, ccb_tag);
821 if (res) {
822 del_timer(&task->slow_task->timer);
823 PM8001_FAIL_DBG(pm8001_ha,
824 pm8001_printk("Executing internal task "
825 "failed\n"));
826 goto ex_err;
828 wait_for_completion(&task->slow_task->completion);
829 res = TMF_RESP_FUNC_FAILED;
830 /* Even TMF timed out, return direct. */
831 if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
832 if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
833 PM8001_FAIL_DBG(pm8001_ha,
834 pm8001_printk("TMF task timeout.\n"));
835 goto ex_err;
839 if (task->task_status.resp == SAS_TASK_COMPLETE &&
840 task->task_status.stat == SAM_STAT_GOOD) {
841 res = TMF_RESP_FUNC_COMPLETE;
842 break;
844 } else {
845 PM8001_EH_DBG(pm8001_ha,
846 pm8001_printk(" Task to dev %016llx response: "
847 "0x%x status 0x%x\n",
848 SAS_ADDR(dev->sas_addr),
849 task->task_status.resp,
850 task->task_status.stat));
851 sas_free_task(task);
852 task = NULL;
855 ex_err:
856 BUG_ON(retry == 3 && task != NULL);
857 sas_free_task(task);
858 return res;
862 * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
863 * @dev: the device structure which sas layer used.
865 static void pm8001_dev_gone_notify(struct domain_device *dev)
867 unsigned long flags = 0;
868 u32 tag;
869 struct pm8001_hba_info *pm8001_ha;
870 struct pm8001_device *pm8001_dev = dev->lldd_dev;
872 pm8001_ha = pm8001_find_ha_by_dev(dev);
873 spin_lock_irqsave(&pm8001_ha->lock, flags);
874 pm8001_tag_alloc(pm8001_ha, &tag);
875 if (pm8001_dev) {
876 u32 device_id = pm8001_dev->device_id;
878 PM8001_DISC_DBG(pm8001_ha,
879 pm8001_printk("found dev[%d:%x] is gone.\n",
880 pm8001_dev->device_id, pm8001_dev->dev_type));
881 if (pm8001_dev->running_req) {
882 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
883 pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
884 dev, 1, 0);
885 spin_lock_irqsave(&pm8001_ha->lock, flags);
887 PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
888 pm8001_free_dev(pm8001_dev);
889 } else {
890 PM8001_DISC_DBG(pm8001_ha,
891 pm8001_printk("Found dev has gone.\n"));
893 dev->lldd_dev = NULL;
894 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
897 void pm8001_dev_gone(struct domain_device *dev)
899 pm8001_dev_gone_notify(dev);
902 static int pm8001_issue_ssp_tmf(struct domain_device *dev,
903 u8 *lun, struct pm8001_tmf_task *tmf)
905 struct sas_ssp_task ssp_task;
906 if (!(dev->tproto & SAS_PROTOCOL_SSP))
907 return TMF_RESP_FUNC_ESUPP;
909 strncpy((u8 *)&ssp_task.LUN, lun, 8);
910 return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task),
911 tmf);
914 /* retry commands by ha, by task and/or by device */
915 void pm8001_open_reject_retry(
916 struct pm8001_hba_info *pm8001_ha,
917 struct sas_task *task_to_close,
918 struct pm8001_device *device_to_close)
920 int i;
921 unsigned long flags;
923 if (pm8001_ha == NULL)
924 return;
926 spin_lock_irqsave(&pm8001_ha->lock, flags);
928 for (i = 0; i < PM8001_MAX_CCB; i++) {
929 struct sas_task *task;
930 struct task_status_struct *ts;
931 struct pm8001_device *pm8001_dev;
932 unsigned long flags1;
933 u32 tag;
934 struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
936 pm8001_dev = ccb->device;
937 if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
938 continue;
939 if (!device_to_close) {
940 uintptr_t d = (uintptr_t)pm8001_dev
941 - (uintptr_t)&pm8001_ha->devices;
942 if (((d % sizeof(*pm8001_dev)) != 0)
943 || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES))
944 continue;
945 } else if (pm8001_dev != device_to_close)
946 continue;
947 tag = ccb->ccb_tag;
948 if (!tag || (tag == 0xFFFFFFFF))
949 continue;
950 task = ccb->task;
951 if (!task || !task->task_done)
952 continue;
953 if (task_to_close && (task != task_to_close))
954 continue;
955 ts = &task->task_status;
956 ts->resp = SAS_TASK_COMPLETE;
957 /* Force the midlayer to retry */
958 ts->stat = SAS_OPEN_REJECT;
959 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
960 if (pm8001_dev)
961 pm8001_dev->running_req--;
962 spin_lock_irqsave(&task->task_state_lock, flags1);
963 task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
964 task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
965 task->task_state_flags |= SAS_TASK_STATE_DONE;
966 if (unlikely((task->task_state_flags
967 & SAS_TASK_STATE_ABORTED))) {
968 spin_unlock_irqrestore(&task->task_state_lock,
969 flags1);
970 pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
971 } else {
972 spin_unlock_irqrestore(&task->task_state_lock,
973 flags1);
974 pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
975 mb();/* in order to force CPU ordering */
976 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
977 task->task_done(task);
978 spin_lock_irqsave(&pm8001_ha->lock, flags);
982 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
986 * Standard mandates link reset for ATA (type 0) and hard reset for
987 * SSP (type 1) , only for RECOVERY
989 int pm8001_I_T_nexus_reset(struct domain_device *dev)
991 int rc = TMF_RESP_FUNC_FAILED;
992 struct pm8001_device *pm8001_dev;
993 struct pm8001_hba_info *pm8001_ha;
994 struct sas_phy *phy;
996 if (!dev || !dev->lldd_dev)
997 return -ENODEV;
999 pm8001_dev = dev->lldd_dev;
1000 pm8001_ha = pm8001_find_ha_by_dev(dev);
1001 phy = sas_get_local_phy(dev);
1003 if (dev_is_sata(dev)) {
1004 DECLARE_COMPLETION_ONSTACK(completion_setstate);
1005 if (scsi_is_sas_phy_local(phy)) {
1006 rc = 0;
1007 goto out;
1009 rc = sas_phy_reset(phy, 1);
1010 msleep(2000);
1011 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1012 dev, 1, 0);
1013 pm8001_dev->setds_completion = &completion_setstate;
1014 rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
1015 pm8001_dev, 0x01);
1016 wait_for_completion(&completion_setstate);
1017 } else {
1018 rc = sas_phy_reset(phy, 1);
1019 msleep(2000);
1021 PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
1022 pm8001_dev->device_id, rc));
1023 out:
1024 sas_put_local_phy(phy);
1025 return rc;
1029 * This function handle the IT_NEXUS_XXX event or completion
1030 * status code for SSP/SATA/SMP I/O request.
1032 int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
1034 int rc = TMF_RESP_FUNC_FAILED;
1035 struct pm8001_device *pm8001_dev;
1036 struct pm8001_hba_info *pm8001_ha;
1037 struct sas_phy *phy;
1038 u32 device_id = 0;
1040 if (!dev || !dev->lldd_dev)
1041 return -1;
1043 pm8001_dev = dev->lldd_dev;
1044 device_id = pm8001_dev->device_id;
1045 pm8001_ha = pm8001_find_ha_by_dev(dev);
1047 PM8001_EH_DBG(pm8001_ha,
1048 pm8001_printk("I_T_Nexus handler invoked !!"));
1050 phy = sas_get_local_phy(dev);
1052 if (dev_is_sata(dev)) {
1053 DECLARE_COMPLETION_ONSTACK(completion_setstate);
1054 if (scsi_is_sas_phy_local(phy)) {
1055 rc = 0;
1056 goto out;
1058 /* send internal ssp/sata/smp abort command to FW */
1059 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1060 dev, 1, 0);
1061 msleep(100);
1063 /* deregister the target device */
1064 pm8001_dev_gone_notify(dev);
1065 msleep(200);
1067 /*send phy reset to hard reset target */
1068 rc = sas_phy_reset(phy, 1);
1069 msleep(2000);
1070 pm8001_dev->setds_completion = &completion_setstate;
1072 wait_for_completion(&completion_setstate);
1073 } else {
1074 /* send internal ssp/sata/smp abort command to FW */
1075 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1076 dev, 1, 0);
1077 msleep(100);
1079 /* deregister the target device */
1080 pm8001_dev_gone_notify(dev);
1081 msleep(200);
1083 /*send phy reset to hard reset target */
1084 rc = sas_phy_reset(phy, 1);
1085 msleep(2000);
1087 PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
1088 pm8001_dev->device_id, rc));
1089 out:
1090 sas_put_local_phy(phy);
1092 return rc;
1094 /* mandatory SAM-3, the task reset the specified LUN*/
1095 int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
1097 int rc = TMF_RESP_FUNC_FAILED;
1098 struct pm8001_tmf_task tmf_task;
1099 struct pm8001_device *pm8001_dev = dev->lldd_dev;
1100 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1101 DECLARE_COMPLETION_ONSTACK(completion_setstate);
1102 if (dev_is_sata(dev)) {
1103 struct sas_phy *phy = sas_get_local_phy(dev);
1104 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1105 dev, 1, 0);
1106 rc = sas_phy_reset(phy, 1);
1107 sas_put_local_phy(phy);
1108 pm8001_dev->setds_completion = &completion_setstate;
1109 rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
1110 pm8001_dev, 0x01);
1111 wait_for_completion(&completion_setstate);
1112 } else {
1113 tmf_task.tmf = TMF_LU_RESET;
1114 rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1116 /* If failed, fall-through I_T_Nexus reset */
1117 PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
1118 pm8001_dev->device_id, rc));
1119 return rc;
1122 /* optional SAM-3 */
1123 int pm8001_query_task(struct sas_task *task)
1125 u32 tag = 0xdeadbeef;
1126 int i = 0;
1127 struct scsi_lun lun;
1128 struct pm8001_tmf_task tmf_task;
1129 int rc = TMF_RESP_FUNC_FAILED;
1130 if (unlikely(!task || !task->lldd_task || !task->dev))
1131 return rc;
1133 if (task->task_proto & SAS_PROTOCOL_SSP) {
1134 struct scsi_cmnd *cmnd = task->uldd_task;
1135 struct domain_device *dev = task->dev;
1136 struct pm8001_hba_info *pm8001_ha =
1137 pm8001_find_ha_by_dev(dev);
1139 int_to_scsilun(cmnd->device->lun, &lun);
1140 rc = pm8001_find_tag(task, &tag);
1141 if (rc == 0) {
1142 rc = TMF_RESP_FUNC_FAILED;
1143 return rc;
1145 PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
1146 for (i = 0; i < 16; i++)
1147 printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
1148 printk(KERN_INFO "]\n");
1149 tmf_task.tmf = TMF_QUERY_TASK;
1150 tmf_task.tag_of_task_to_be_managed = tag;
1152 rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1153 switch (rc) {
1154 /* The task is still in Lun, release it then */
1155 case TMF_RESP_FUNC_SUCC:
1156 PM8001_EH_DBG(pm8001_ha,
1157 pm8001_printk("The task is still in Lun\n"));
1158 break;
1159 /* The task is not in Lun or failed, reset the phy */
1160 case TMF_RESP_FUNC_FAILED:
1161 case TMF_RESP_FUNC_COMPLETE:
1162 PM8001_EH_DBG(pm8001_ha,
1163 pm8001_printk("The task is not in Lun or failed,"
1164 " reset the phy\n"));
1165 break;
1168 pm8001_printk(":rc= %d\n", rc);
1169 return rc;
1172 /* mandatory SAM-3, still need free task/ccb info, abord the specified task */
1173 int pm8001_abort_task(struct sas_task *task)
1175 unsigned long flags;
1176 u32 tag = 0xdeadbeef;
1177 u32 device_id;
1178 struct domain_device *dev ;
1179 struct pm8001_hba_info *pm8001_ha = NULL;
1180 struct pm8001_ccb_info *ccb;
1181 struct scsi_lun lun;
1182 struct pm8001_device *pm8001_dev;
1183 struct pm8001_tmf_task tmf_task;
1184 int rc = TMF_RESP_FUNC_FAILED;
1185 if (unlikely(!task || !task->lldd_task || !task->dev))
1186 return rc;
1187 spin_lock_irqsave(&task->task_state_lock, flags);
1188 if (task->task_state_flags & SAS_TASK_STATE_DONE) {
1189 spin_unlock_irqrestore(&task->task_state_lock, flags);
1190 rc = TMF_RESP_FUNC_COMPLETE;
1191 goto out;
1193 spin_unlock_irqrestore(&task->task_state_lock, flags);
1194 if (task->task_proto & SAS_PROTOCOL_SSP) {
1195 struct scsi_cmnd *cmnd = task->uldd_task;
1196 dev = task->dev;
1197 ccb = task->lldd_task;
1198 pm8001_dev = dev->lldd_dev;
1199 pm8001_ha = pm8001_find_ha_by_dev(dev);
1200 int_to_scsilun(cmnd->device->lun, &lun);
1201 rc = pm8001_find_tag(task, &tag);
1202 if (rc == 0) {
1203 printk(KERN_INFO "No such tag in %s\n", __func__);
1204 rc = TMF_RESP_FUNC_FAILED;
1205 return rc;
1207 device_id = pm8001_dev->device_id;
1208 PM8001_EH_DBG(pm8001_ha,
1209 pm8001_printk("abort io to deviceid= %d\n", device_id));
1210 tmf_task.tmf = TMF_ABORT_TASK;
1211 tmf_task.tag_of_task_to_be_managed = tag;
1212 rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1213 pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1214 pm8001_dev->sas_device, 0, tag);
1215 } else if (task->task_proto & SAS_PROTOCOL_SATA ||
1216 task->task_proto & SAS_PROTOCOL_STP) {
1217 dev = task->dev;
1218 pm8001_dev = dev->lldd_dev;
1219 pm8001_ha = pm8001_find_ha_by_dev(dev);
1220 rc = pm8001_find_tag(task, &tag);
1221 if (rc == 0) {
1222 printk(KERN_INFO "No such tag in %s\n", __func__);
1223 rc = TMF_RESP_FUNC_FAILED;
1224 return rc;
1226 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1227 pm8001_dev->sas_device, 0, tag);
1228 } else if (task->task_proto & SAS_PROTOCOL_SMP) {
1229 /* SMP */
1230 dev = task->dev;
1231 pm8001_dev = dev->lldd_dev;
1232 pm8001_ha = pm8001_find_ha_by_dev(dev);
1233 rc = pm8001_find_tag(task, &tag);
1234 if (rc == 0) {
1235 printk(KERN_INFO "No such tag in %s\n", __func__);
1236 rc = TMF_RESP_FUNC_FAILED;
1237 return rc;
1239 rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1240 pm8001_dev->sas_device, 0, tag);
1243 out:
1244 if (rc != TMF_RESP_FUNC_COMPLETE)
1245 pm8001_printk("rc= %d\n", rc);
1246 return rc;
1249 int pm8001_abort_task_set(struct domain_device *dev, u8 *lun)
1251 int rc = TMF_RESP_FUNC_FAILED;
1252 struct pm8001_tmf_task tmf_task;
1254 tmf_task.tmf = TMF_ABORT_TASK_SET;
1255 rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1256 return rc;
1259 int pm8001_clear_aca(struct domain_device *dev, u8 *lun)
1261 int rc = TMF_RESP_FUNC_FAILED;
1262 struct pm8001_tmf_task tmf_task;
1264 tmf_task.tmf = TMF_CLEAR_ACA;
1265 rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1267 return rc;
1270 int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
1272 int rc = TMF_RESP_FUNC_FAILED;
1273 struct pm8001_tmf_task tmf_task;
1274 struct pm8001_device *pm8001_dev = dev->lldd_dev;
1275 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1277 PM8001_EH_DBG(pm8001_ha,
1278 pm8001_printk("I_T_L_Q clear task set[%x]\n",
1279 pm8001_dev->device_id));
1280 tmf_task.tmf = TMF_CLEAR_TASK_SET;
1281 rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1282 return rc;