PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / staging / cxt1e1 / musycc.h
blob56fb42f0f64ecab9cb5e6faf4125c9340a5fc97a
1 #ifndef _INC_MUSYCC_H_
2 #define _INC_MUSYCC_H_
4 /*-----------------------------------------------------------------------------
5 * musycc.h - Multichannel Synchronous Communications Controller
6 * CN8778/8474A/8472A/8471A
8 * Copyright (C) 2002-2005 SBE, Inc.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * For further information, contact via email: support@sbei.com
21 * SBE, Inc. San Ramon, California U.S.A.
22 *-----------------------------------------------------------------------------
25 #include <linux/types.h>
27 #define VINT8 volatile u_int8_t
28 #define VINT32 volatile u_int32_t
30 #include "pmcc4_defs.h"
33 /*------------------------------------------------------------------------
34 // Vendor, Board Identification definitions
35 //------------------------------------------------------------------------
38 #define PCI_VENDOR_ID_CONEXANT 0x14f1
39 #define PCI_DEVICE_ID_CN8471 0x8471
40 #define PCI_DEVICE_ID_CN8472 0x8472
41 #define PCI_DEVICE_ID_CN8474 0x8474
42 #define PCI_DEVICE_ID_CN8478 0x8478
43 #define PCI_DEVICE_ID_CN8500 0x8500
44 #define PCI_DEVICE_ID_CN8501 0x8501
45 #define PCI_DEVICE_ID_CN8502 0x8502
46 #define PCI_DEVICE_ID_CN8503 0x8503
48 #define INT_QUEUE_SIZE MUSYCC_NIQD
50 /* RAM image of MUSYCC registers laid out as a C structure */
51 struct musycc_groupr {
52 VINT32 thp[32]; /* Transmit Head Pointer [5-29] */
53 VINT32 tmp[32]; /* Transmit Message Pointer [5-30] */
54 VINT32 rhp[32]; /* Receive Head Pointer [5-29] */
55 VINT32 rmp[32]; /* Receive Message Pointer [5-30] */
56 VINT8 ttsm[128]; /* Time Slot Map [5-22] */
57 VINT8 tscm[256]; /* Subchannel Map [5-24] */
58 VINT32 tcct[32]; /* Channel Configuration [5-26] */
59 VINT8 rtsm[128]; /* Time Slot Map [5-22] */
60 VINT8 rscm[256]; /* Subchannel Map [5-24] */
61 VINT32 rcct[32]; /* Channel Configuration [5-26] */
62 VINT32 __glcd; /* Global Configuration Descriptor [5-10] */
63 VINT32 __iqp; /* Interrupt Queue Pointer [5-36] */
64 VINT32 __iql; /* Interrupt Queue Length [5-36] */
65 VINT32 grcd; /* Group Configuration Descriptor [5-16] */
66 VINT32 mpd; /* Memory Protection Descriptor [5-18] */
67 VINT32 mld; /* Message Length Descriptor [5-20] */
68 VINT32 pcd; /* Port Configuration Descriptor [5-19] */
71 /* hardware MUSYCC registers laid out as a C structure */
72 struct musycc_globalr {
73 VINT32 gbp; /* Group Base Pointer */
74 VINT32 dacbp; /* Dual Address Cycle Base Pointer */
75 VINT32 srd; /* Service Request Descriptor */
76 VINT32 isd; /* Interrupt Service Descriptor */
78 * adjust __thp due to above 4 registers, which are not contained
79 * within musycc_groupr[]. All __XXX[] are just place holders,
80 * anyhow.
82 VINT32 __thp[32 - 4]; /* Transmit Head Pointer [5-29] */
83 VINT32 __tmp[32]; /* Transmit Message Pointer [5-30] */
84 VINT32 __rhp[32]; /* Receive Head Pointer [5-29] */
85 VINT32 __rmp[32]; /* Receive Message Pointer [5-30] */
86 VINT8 ttsm[128]; /* Time Slot Map [5-22] */
87 VINT8 tscm[256]; /* Subchannel Map [5-24] */
88 VINT32 tcct[32]; /* Channel Configuration [5-26] */
89 VINT8 rtsm[128]; /* Time Slot Map [5-22] */
90 VINT8 rscm[256]; /* Subchannel Map [5-24] */
91 VINT32 rcct[32]; /* Channel Configuration [5-26] */
92 VINT32 glcd; /* Global Configuration Descriptor [5-10] */
93 VINT32 iqp; /* Interrupt Queue Pointer [5-36] */
94 VINT32 iql; /* Interrupt Queue Length [5-36] */
95 VINT32 grcd; /* Group Configuration Descriptor [5-16] */
96 VINT32 mpd; /* Memory Protection Descriptor [5-18] */
97 VINT32 mld; /* Message Length Descriptor [5-20] */
98 VINT32 pcd; /* Port Configuration Descriptor [5-19] */
99 VINT32 rbist; /* Receive BIST status [5-4] */
100 VINT32 tbist; /* Receive BIST status [5-4] */
103 /* Global Config Descriptor bit macros */
104 #define MUSYCC_GCD_ECLK_ENABLE 0x00000800 /* EBUS clock enable */
105 #define MUSYCC_GCD_INTEL_SELECT 0x00000400 /* MPU type select */
106 #define MUSYCC_GCD_INTA_DISABLE 0x00000008 /* PCI INTA disable */
107 #define MUSYCC_GCD_INTB_DISABLE 0x00000004 /* PCI INTB disable */
108 #define MUSYCC_GCD_BLAPSE 12 /* Position index for BLAPSE bit
109 * field */
110 #define MUSYCC_GCD_ALAPSE 8 /* Position index for ALAPSE bit
111 * field */
112 #define MUSYCC_GCD_ELAPSE 4 /* Position index for ELAPSE bit
113 * field */
114 #define MUSYCC_GCD_PORTMAP_3 3 /* Reserved */
115 #define MUSYCC_GCD_PORTMAP_2 2 /* Port 0=>Grp 0,1,2,3; Port 1=>Grp
116 * 4,5,6,7 */
117 #define MUSYCC_GCD_PORTMAP_1 1 /* Port 0=>Grp 0,1; Port 1=>Grp 2,3,
118 * etc... */
119 #define MUSYCC_GCD_PORTMAP_0 0 /* Port 0=>Grp 0; Port 1=>Grp 2,
120 * etc... */
122 /* and board specific assignments... */
123 #ifdef SBE_WAN256T3_ENABLE
124 #define BLAPSE_VAL 0
125 #define ALAPSE_VAL 0
126 #define ELAPSE_VAL 7
127 #define PORTMAP_VAL MUSYCC_GCD_PORTMAP_2
128 #endif
130 #ifdef SBE_PMCC4_ENABLE
131 #define BLAPSE_VAL 7
132 #define ALAPSE_VAL 3
133 #define ELAPSE_VAL 7
134 #define PORTMAP_VAL MUSYCC_GCD_PORTMAP_0
135 #endif
137 #define GCD_MAGIC (((BLAPSE_VAL)<<(MUSYCC_GCD_BLAPSE)) | \
138 ((ALAPSE_VAL)<<(MUSYCC_GCD_ALAPSE)) | \
139 ((ELAPSE_VAL)<<(MUSYCC_GCD_ELAPSE)) | \
140 (MUSYCC_GCD_ECLK_ENABLE) | PORTMAP_VAL)
142 /* Group Config Descriptor bit macros */
143 #define MUSYCC_GRCD_RX_ENABLE 0x00000001 /* Enable receive processing */
144 #define MUSYCC_GRCD_TX_ENABLE 0x00000002 /* Enable transmit processing */
145 #define MUSYCC_GRCD_SUBCHAN_DISABLE 0x00000004 /* Master disable for
146 * subchanneling */
147 #define MUSYCC_GRCD_OOFMP_DISABLE 0x00000008 /* Out of Frame message
148 * processing disabled all
149 * channels */
150 #define MUSYCC_GRCD_OOFIRQ_DISABLE 0x00000010 /* Out of Frame/In Frame irqs
151 * disabled */
152 #define MUSYCC_GRCD_COFAIRQ_DISABLE 0x00000020 /* Change of Frame Alignment
153 * irq disabled */
154 #define MUSYCC_GRCD_INHRBSD 0x00000100 /* Receive Buffer Status
155 * overwrite disabled */
156 #define MUSYCC_GRCD_INHTBSD 0x00000200 /* Transmit Buffer Status
157 * overwrite disabled */
158 #define MUSYCC_GRCD_SF_ALIGN 0x00008000 /* External frame sync */
159 #define MUSYCC_GRCD_MC_ENABLE 0x00000040 /* Message configuration bits
160 * copy enable. Conexant sez
161 * turn this on */
162 #define MUSYCC_GRCD_POLLTH_16 0x00000001 /* Poll every 16th frame */
163 #define MUSYCC_GRCD_POLLTH_32 0x00000002 /* Poll every 32nd frame */
164 #define MUSYCC_GRCD_POLLTH_64 0x00000003 /* Poll every 64th frame */
165 #define MUSYCC_GRCD_POLLTH_SHIFT 10 /* Position index for poll throttle
166 * bit field */
167 #define MUSYCC_GRCD_SUERM_THRESH_SHIFT 16 /* Position index for SUERM
168 * count threshold */
170 /* Port Config Descriptor bit macros */
171 #define MUSYCC_PCD_E1X2_MODE 2 /* Port mode in bits 0-2. T1 and E1 */
172 #define MUSYCC_PCD_E1X4_MODE 3 /* are defined in cn847x.h */
173 #define MUSYCC_PCD_NX64_MODE 4
174 #define MUSYCC_PCD_TXDATA_RISING 0x00000010 /* Sample Tx data on TCLK
175 * rising edge */
176 #define MUSYCC_PCD_TXSYNC_RISING 0x00000020 /* Sample Tx frame sync on
177 * TCLK rising edge */
178 #define MUSYCC_PCD_RXDATA_RISING 0x00000040 /* Sample Rx data on RCLK
179 * rising edge */
180 #define MUSYCC_PCD_RXSYNC_RISING 0x00000080 /* Sample Rx frame sync on
181 * RCLK rising edge */
182 #define MUSYCC_PCD_ROOF_RISING 0x00000100 /* Sample Rx Out Of Frame
183 * signal on RCLK rising edge */
184 #define MUSYCC_PCD_TX_DRIVEN 0x00000200 /* No mapped timeslots causes
185 * logic 1 on output, else
186 * tristate */
187 #define MUSYCC_PCD_PORTMODE_MASK 0xfffffff8 /* For changing the port mode
188 * between E1 and T1 */
190 /* Time Slot Descriptor bit macros */
191 #define MUSYCC_TSD_MODE_64KBPS 4
192 #define MUSYCC_TSD_MODE_56KBPS 5
193 #define MUSYCC_TSD_SUBCHANNEL_WO_FIRST 6
194 #define MUSYCC_TSD_SUBCHANNEL_WITH_FIRST 7
196 /* Message Descriptor bit macros */
197 #define MUSYCC_MDT_BASE03_ADDR 0x00006000
199 /* Channel Config Descriptor bit macros */
200 #define MUSYCC_CCD_BUFIRQ_DISABLE 0x00000002 /* BUFF and ONR irqs disabled */
201 #define MUSYCC_CCD_EOMIRQ_DISABLE 0x00000004 /* EOM irq disabled */
202 #define MUSYCC_CCD_MSGIRQ_DISABLE 0x00000008 /* LNG, FCS, ALIGN, and ABT
203 * irqs disabled */
204 #define MUSYCC_CCD_IDLEIRQ_DISABLE 0x00000010 /* CHABT, CHIC, and SHT irqs
205 * disabled */
206 #define MUSYCC_CCD_FILTIRQ_DISABLE 0x00000020 /* SFILT irq disabled */
207 #define MUSYCC_CCD_SDECIRQ_DISABLE 0x00000040 /* SDEC irq disabled */
208 #define MUSYCC_CCD_SINCIRQ_DISABLE 0x00000080 /* SINC irq disabled */
209 #define MUSYCC_CCD_SUERIRQ_DISABLE 0x00000100 /* SUERR irq disabled */
210 #define MUSYCC_CCD_FCS_XFER 0x00000200 /* Propagate FCS along with
211 * received data */
212 #define MUSYCC_CCD_PROTO_SHIFT 12 /* Position index for protocol bit
213 * field */
214 #define MUSYCC_CCD_TRANS 0 /* Protocol mode in bits 12-14 */
215 #define MUSYCC_CCD_SS7 1
216 #define MUSYCC_CCD_HDLC_FCS16 2
217 #define MUSYCC_CCD_HDLC_FCS32 3
218 #define MUSYCC_CCD_EOPIRQ_DISABLE 0x00008000 /* EOP irq disabled */
219 #define MUSYCC_CCD_INVERT_DATA 0x00800000 /* Invert data */
220 #define MUSYCC_CCD_MAX_LENGTH 10 /* Position index for max length bit
221 * field */
222 #define MUSYCC_CCD_BUFFER_LENGTH 16 /* Position index for internal data
223 * buffer length */
224 #define MUSYCC_CCD_BUFFER_LOC 24 /* Position index for internal data
225 * buffer starting location */
227 /****************************************************************************
228 * Interrupt Descriptor Information */
230 #define INT_EMPTY_ENTRY 0xfeedface
231 #define INT_EMPTY_ENTRY2 0xdeadface
233 /****************************************************************************
234 * Interrupt Status Descriptor
236 * NOTE: One must first fetch the value of the interrupt status descriptor
237 * into a local variable, then pass that value into the read macros. This
238 * is required to avoid race conditions.
239 ***/
241 #define INTRPTS_NEXTINT_M 0x7FFF0000
242 #define INTRPTS_NEXTINT_S 16
243 #define INTRPTS_NEXTINT(x) ((x & INTRPTS_NEXTINT_M) >> INTRPTS_NEXTINT_S)
245 #define INTRPTS_INTFULL_M 0x00008000
246 #define INTRPTS_INTFULL_S 15
247 #define INTRPTS_INTFULL(x) ((x & INTRPTS_INTFULL_M) >> INTRPTS_INTFULL_S)
249 #define INTRPTS_INTCNT_M 0x00007FFF
250 #define INTRPTS_INTCNT_S 0
251 #define INTRPTS_INTCNT(x) ((x & INTRPTS_INTCNT_M) >> INTRPTS_INTCNT_S)
254 /****************************************************************************
255 * Interrupt Descriptor
256 ***/
258 #define INTRPT_DIR_M 0x80000000
259 #define INTRPT_DIR_S 31
260 #define INTRPT_DIR(x) ((x & INTRPT_DIR_M) >> INTRPT_DIR_S)
262 #define INTRPT_GRP_M 0x60000000
263 #define INTRPT_GRP_MSB_M 0x00004000
264 #define INTRPT_GRP_S 29
265 #define INTRPT_GRP_MSB_S 12
266 #define INTRPT_GRP(x) (((x & INTRPT_GRP_M) >> INTRPT_GRP_S) | \
267 ((x & INTRPT_GRP_MSB_M) >> INTRPT_GRP_MSB_S))
269 #define INTRPT_CH_M 0x1F000000
270 #define INTRPT_CH_S 24
271 #define INTRPT_CH(x) ((x & INTRPT_CH_M) >> INTRPT_CH_S)
273 #define INTRPT_EVENT_M 0x00F00000
274 #define INTRPT_EVENT_S 20
275 #define INTRPT_EVENT(x) ((x & INTRPT_EVENT_M) >> INTRPT_EVENT_S)
277 #define INTRPT_ERROR_M 0x000F0000
278 #define INTRPT_ERROR_S 16
279 #define INTRPT_ERROR(x) ((x & INTRPT_ERROR_M) >> INTRPT_ERROR_S)
281 #define INTRPT_ILOST_M 0x00008000
282 #define INTRPT_ILOST_S 15
283 #define INTRPT_ILOST(x) ((x & INTRPT_ILOST_M) >> INTRPT_ILOST_S)
285 #define INTRPT_PERR_M 0x00004000
286 #define INTRPT_PERR_S 14
287 #define INTRPT_PERR(x) ((x & INTRPT_PERR_M) >> INTRPT_PERR_S)
289 #define INTRPT_BLEN_M 0x00003FFF
290 #define INTRPT_BLEN_S 0
291 #define INTRPT_BLEN(x) ((x & INTRPT_BLEN_M) >> INTRPT_BLEN_S)
294 /* Buffer Descriptor bit macros */
295 #define OWNER_BIT 0x80000000 /* Set for MUSYCC owner on xmit, host
296 * owner on receive */
297 #define HOST_TX_OWNED 0x00000000 /* Host owns descriptor */
298 #define MUSYCC_TX_OWNED 0x80000000 /* MUSYCC owns descriptor */
299 #define HOST_RX_OWNED 0x80000000 /* Host owns descriptor */
300 #define MUSYCC_RX_OWNED 0x00000000 /* MUSYCC owns descriptor */
302 #define POLL_DISABLED 0x40000000 /* MUSYCC not allowed to poll buffer
303 * for ownership */
304 #define EOMIRQ_ENABLE 0x20000000 /* This buffer contains the end of
305 * the message */
306 #define EOBIRQ_ENABLE 0x10000000 /* EOB irq enabled */
307 #define PADFILL_ENABLE 0x01000000 /* Enable padfill */
308 #define REPEAT_BIT 0x00008000 /* Bit on for FISU descriptor */
309 #define LENGTH_MASK 0X3fff /* This part of status descriptor is
310 * length */
311 #define IDLE_CODE 25 /* Position index for idle code (2
312 * bits) */
313 #define EXTRA_FLAGS 16 /* Position index for minimum flags
314 * between messages (8 bits) */
315 #define IDLE_CODE_MASK 0x03 /* Gets rid of garbage before the
316 * pattern is OR'd in */
317 #define EXTRA_FLAGS_MASK 0xff /* Gets rid of garbage before the
318 * pattern is OR'd in */
319 #define PCI_PERMUTED_OWNER_BIT 0x00000080 /* For flipping the bit on
320 * the polled mode descriptor */
322 /* Service Request Descriptor bit macros */
323 #define SREQ 8 /* Position index for service request bit
324 * field */
325 #define SR_NOOP (0<<(SREQ)) /* No Operation. Generates SACK */
326 #define SR_CHIP_RESET (1<<(SREQ)) /* Soft chip reset */
327 #define SR_GROUP_RESET (2<<(SREQ)) /* Group reset */
328 #define SR_GLOBAL_INIT (4<<(SREQ)) /* Global init: read global
329 * config deswc and interrupt
330 * queue desc */
331 #define SR_GROUP_INIT (5<<(SREQ)) /* Group init: read Timeslot
332 * and Subchannel maps,
333 * Channel Config, */
335 * Group Config, Memory Protect, Message Length, and Port Config
336 * Descriptors
338 #define SR_CHANNEL_ACTIVATE (8<<(SREQ)) /* Init channel, read Head
339 * Pointer, process first
340 * Message Descriptor */
341 #define SR_GCHANNEL_MASK 0x001F /* channel portion (gchan) */
342 #define SR_CHANNEL_DEACTIVATE (9<<(SREQ)) /* Stop channel processing */
343 #define SR_JUMP (10<<(SREQ)) /* a: Process new Message
344 * List */
345 #define SR_CHANNEL_CONFIG (11<<(SREQ)) /* b: Read channel
346 * Configuration Descriptor */
347 #define SR_GLOBAL_CONFIG (16<<(SREQ)) /* 10: Read Global
348 * Configuration Descriptor */
349 #define SR_INTERRUPT_Q (17<<(SREQ)) /* 11: Read Interrupt Queue
350 * Descriptor */
351 #define SR_GROUP_CONFIG (18<<(SREQ)) /* 12: Read Group
352 * Configuration Descriptor */
353 #define SR_MEMORY_PROTECT (19<<(SREQ)) /* 13: Read Memory Protection
354 * Descriptor */
355 #define SR_MESSAGE_LENGTH (20<<(SREQ)) /* 14: Read Message Length
356 * Descriptor */
357 #define SR_PORT_CONFIG (21<<(SREQ)) /* 15: Read Port
358 * Configuration Descriptor */
359 #define SR_TIMESLOT_MAP (24<<(SREQ)) /* 18: Read Timeslot Map */
360 #define SR_SUBCHANNEL_MAP (25<<(SREQ)) /* 19: Read Subchannel Map */
361 #define SR_CHAN_CONFIG_TABLE (26<<(SREQ)) /* 20: Read Channel
362 * Configuration Table for
363 * the group */
364 #define SR_TX_DIRECTION 0x00000020 /* Transmit direction bit.
365 * Bit off indicates receive
366 * direction */
367 #define SR_RX_DIRECTION 0x00000000
369 /* Interrupt Descriptor bit macros */
370 #define GROUP10 29 /* Position index for the 2 LS group
371 * bits */
372 #define CHANNEL 24 /* Position index for channel bits */
373 #define INT_IQD_TX 0x80000000
374 #define INT_IQD_GRP 0x60000000
375 #define INT_IQD_CHAN 0x1f000000
376 #define INT_IQD_EVENT 0x00f00000
377 #define INT_IQD_ERROR 0x000f0000
378 #define INT_IQD_ILOST 0x00008000
379 #define INT_IQD_PERR 0x00004000
380 #define INT_IQD_BLEN 0x00003fff
382 /* Interrupt Descriptor Events */
383 #define EVE_EVENT 20 /* Position index for event bits */
384 #define EVE_NONE 0 /* No event to report in this
385 * interrupt */
386 #define EVE_SACK 1 /* Service Request acknowledge */
387 #define EVE_EOB 2 /* End of Buffer */
388 #define EVE_EOM 3 /* End of Message */
389 #define EVE_EOP 4 /* End of Padfill */
390 #define EVE_CHABT 5 /* Change to Abort Code */
391 #define EVE_CHIC 6 /* Change to Idle Code */
392 #define EVE_FREC 7 /* Frame Recovery */
393 #define EVE_SINC 8 /* MTP2 SUERM Increment */
394 #define EVE_SDEC 9 /* MTP2 SUERM Decrement */
395 #define EVE_SFILT 10 /* MTP2 SUERM Filtered Message */
396 /* Interrupt Descriptor Errors */
397 #define ERR_ERRORS 16 /* Position index for error bits */
398 #define ERR_BUF 1 /* Buffer Error */
399 #define ERR_COFA 2 /* Change of Frame Alignment Error */
400 #define ERR_ONR 3 /* Owner Bit Error */
401 #define ERR_PROT 4 /* Memory Protection Error */
402 #define ERR_OOF 8 /* Out of Frame Error */
403 #define ERR_FCS 9 /* FCS Error */
404 #define ERR_ALIGN 10 /* Octet Alignment Error */
405 #define ERR_ABT 11 /* Abort Termination */
406 #define ERR_LNG 12 /* Long Message Error */
407 #define ERR_SHT 13 /* Short Message Error */
408 #define ERR_SUERR 14 /* SUERM threshold exceeded */
409 #define ERR_PERR 15 /* PCI Parity Error */
410 /* Other Stuff */
411 #define TRANSMIT_DIRECTION 0x80000000 /* Transmit direction bit. Bit off
412 * indicates receive direction */
413 #define ILOST 0x00008000 /* Interrupt Lost */
414 #define GROUPMSB 0x00004000 /* Group number MSB */
415 #define SACK_IMAGE 0x00100000 /* Used in IRQ for semaphore test */
416 #define INITIAL_STATUS 0x10000 /* IRQ status should be this after
417 * reset */
419 /* This must be defined on an entire channel group (Port) basis */
420 #define SUERM_THRESHOLD 0x1f
422 #undef VINT32
423 #undef VINT8
425 #endif /*** _INC_MUSYCC_H_ ***/
427 /*** End-of-File ***/