drivers/staging/dgap/digi.h

   1 /*
   2  * Copyright 2003 Digi International (www.digi.com)
   3  *      Scott H Kilau <Scott_Kilau at digi dot com>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2, or (at your option)
   8  * any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
  12  * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
  13  * PURPOSE.  See the GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18  *
  19  * $Id: digi.h,v 1.1 2009/10/23 14:01:57 markh Exp $
  20  *
  21  *      NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!!
  22  */
  23
  24 #ifndef __DIGI_H
  25 #define __DIGI_H
  26
  27 /************************************************************************
  28  ***    Definitions for Digi ditty(1) command.
  29  ************************************************************************/
  30
  31
  32 /*
  33  * Copyright (c) 1988-96 Digi International Inc., All Rights Reserved.
  34  */
  35
  36 /************************************************************************
  37  * This module provides application access to special Digi
  38  * serial line enhancements which are not standard UNIX(tm) features.
  39  ************************************************************************/
  40
  41 #if !defined(TIOCMODG)
  42
  43 #define TIOCMODG        ('d'<<8) | 250          /* get modem ctrl state */
  44 #define TIOCMODS        ('d'<<8) | 251          /* set modem ctrl state */
  45
  46 #ifndef TIOCM_LE
  47 #define         TIOCM_LE        0x01            /* line enable          */
  48 #define         TIOCM_DTR       0x02            /* data terminal ready  */
  49 #define         TIOCM_RTS       0x04            /* request to send      */
  50 #define         TIOCM_ST        0x08            /* secondary transmit   */
  51 #define         TIOCM_SR        0x10            /* secondary receive    */
  52 #define         TIOCM_CTS       0x20            /* clear to send        */
  53 #define         TIOCM_CAR       0x40            /* carrier detect       */
  54 #define         TIOCM_RNG       0x80            /* ring indicator       */
  55 #define         TIOCM_DSR       0x100           /* data set ready       */
  56 #define         TIOCM_RI        TIOCM_RNG       /* ring (alternate)     */
  57 #define         TIOCM_CD        TIOCM_CAR       /* carrier detect (alt) */
  58 #endif
  59
  60 #endif
  61
  62 #if !defined(TIOCMSET)
  63 #define TIOCMSET        ('d'<<8) | 252          /* set modem ctrl state */
  64 #define TIOCMGET        ('d'<<8) | 253          /* set modem ctrl state */
  65 #endif
  66
  67 #if !defined(TIOCMBIC)
  68 #define TIOCMBIC        ('d'<<8) | 254          /* set modem ctrl state */
  69 #define TIOCMBIS        ('d'<<8) | 255          /* set modem ctrl state */
  70 #endif
  71
  72
  73 #if !defined(TIOCSDTR)
  74 #define TIOCSDTR        ('e'<<8) | 0            /* set DTR              */
  75 #define TIOCCDTR        ('e'<<8) | 1            /* clear DTR            */
  76 #endif
  77
  78 /************************************************************************
  79  * Ioctl command arguments for DIGI parameters.
  80  ************************************************************************/
  81 #define DIGI_GETA       ('e'<<8) | 94           /* Read params          */
  82
  83 #define DIGI_SETA       ('e'<<8) | 95           /* Set params           */
  84 #define DIGI_SETAW      ('e'<<8) | 96           /* Drain & set params   */
  85 #define DIGI_SETAF      ('e'<<8) | 97           /* Drain, flush & set params */
  86
  87 #define DIGI_KME        ('e'<<8) | 98           /* Read/Write Host      */
  88                                                 /* Adapter Memory       */
  89
  90 #define DIGI_GETFLOW    ('e'<<8) | 99           /* Get startc/stopc flow */
  91                                                 /* control characters    */
  92 #define DIGI_SETFLOW    ('e'<<8) | 100          /* Set startc/stopc flow */
  93                                                 /* control characters    */
  94 #define DIGI_GETAFLOW   ('e'<<8) | 101          /* Get Aux. startc/stopc */
  95                                                 /* flow control chars    */
  96 #define DIGI_SETAFLOW   ('e'<<8) | 102          /* Set Aux. startc/stopc */
  97                                                 /* flow control chars    */
  98
  99 #define DIGI_GEDELAY    ('d'<<8) | 246          /* Get edelay */
 100 #define DIGI_SEDELAY    ('d'<<8) | 247          /* Set edelay */
 101
 102 struct  digiflow_t {
 103         unsigned char   startc;                         /* flow cntl start char */
 104         unsigned char   stopc;                          /* flow cntl stop char  */
 105 };
 106
 107
 108 #ifdef  FLOW_2200
 109 #define F2200_GETA      ('e'<<8) | 104          /* Get 2x36 flow cntl flags */
 110 #define F2200_SETAW     ('e'<<8) | 105          /* Set 2x36 flow cntl flags */
 111 #define         F2200_MASK      0x03            /* 2200 flow cntl bit mask  */
 112 #define         FCNTL_2200      0x01            /* 2x36 terminal flow cntl  */
 113 #define         PCNTL_2200      0x02            /* 2x36 printer flow cntl   */
 114 #define F2200_XON       0xf8
 115 #define P2200_XON       0xf9
 116 #define F2200_XOFF      0xfa
 117 #define P2200_XOFF      0xfb
 118
 119 #define FXOFF_MASK      0x03                    /* 2200 flow status mask    */
 120 #define RCVD_FXOFF      0x01                    /* 2x36 Terminal XOFF rcvd  */
 121 #define RCVD_PXOFF      0x02                    /* 2x36 Printer XOFF rcvd   */
 122 #endif
 123
 124 /************************************************************************
 125  * Values for digi_flags
 126  ************************************************************************/
 127 #define DIGI_IXON       0x0001          /* Handle IXON in the FEP       */
 128 #define DIGI_FAST       0x0002          /* Fast baud rates              */
 129 #define RTSPACE         0x0004          /* RTS input flow control       */
 130 #define CTSPACE         0x0008          /* CTS output flow control      */
 131 #define DSRPACE         0x0010          /* DSR output flow control      */
 132 #define DCDPACE         0x0020          /* DCD output flow control      */
 133 #define DTRPACE         0x0040          /* DTR input flow control       */
 134 #define DIGI_COOK       0x0080          /* Cooked processing done in FEP */
 135 #define DIGI_FORCEDCD   0x0100          /* Force carrier                */
 136 #define DIGI_ALTPIN     0x0200          /* Alternate RJ-45 pin config   */
 137 #define DIGI_AIXON      0x0400          /* Aux flow control in fep      */
 138 #define DIGI_PRINTER    0x0800          /* Hold port open for flow cntrl*/
 139 #define DIGI_PP_INPUT   0x1000          /* Change parallel port to input*/
 140 #define DIGI_DTR_TOGGLE 0x2000          /* Support DTR Toggle           */
 141 #define DIGI_422        0x4000          /* for 422/232 selectable panel */
 142 #define DIGI_RTS_TOGGLE 0x8000          /* Support RTS Toggle           */
 143
 144 /************************************************************************
 145  * These options are not supported on the comxi.
 146  ************************************************************************/
 147 #define DIGI_COMXI      (DIGI_FAST|DIGI_COOK|DSRPACE|DCDPACE|DTRPACE)
 148
 149 #define DIGI_PLEN       28              /* String length                */
 150 #define DIGI_TSIZ       10              /* Terminal string len          */
 151
 152 /************************************************************************
 153  * Structure used with ioctl commands for DIGI parameters.
 154  ************************************************************************/
 155 struct digi_t {
 156         unsigned short  digi_flags;             /* Flags (see above)    */
 157         unsigned short  digi_maxcps;            /* Max printer CPS      */
 158         unsigned short  digi_maxchar;           /* Max chars in print queue */
 159         unsigned short  digi_bufsize;           /* Buffer size          */
 160         unsigned char   digi_onlen;             /* Length of ON string  */
 161         unsigned char   digi_offlen;            /* Length of OFF string */
 162         char            digi_onstr[DIGI_PLEN];  /* Printer on string    */
 163         char            digi_offstr[DIGI_PLEN]; /* Printer off string   */
 164         char            digi_term[DIGI_TSIZ];   /* terminal string      */
 165 };
 166
 167 /************************************************************************
 168  * KME definitions and structures.
 169  ************************************************************************/
 170 #define RW_IDLE         0       /* Operation complete                   */
 171 #define RW_READ         1       /* Read Concentrator Memory             */
 172 #define RW_WRITE        2       /* Write Concentrator Memory            */
 173
 174 struct rw_t {
 175         unsigned char   rw_req;         /* Request type                 */
 176         unsigned char   rw_board;       /* Host Adapter board number    */
 177         unsigned char   rw_conc;        /* Concentrator number          */
 178         unsigned char   rw_reserved;    /* Reserved for expansion       */
 179         unsigned long   rw_addr;        /* Address in concentrator      */
 180         unsigned short  rw_size;        /* Read/write request length    */
 181         unsigned char   rw_data[128];   /* Data to read/write           */
 182 };
 183
 184 /***********************************************************************
 185  * Shrink Buffer and Board Information definitions and structures.
 186
 187  ************************************************************************/
 188                         /* Board type return codes */
 189 #define PCXI_TYPE 1     /* Board type at the designated port is a PC/Xi */
 190 #define PCXM_TYPE 2     /* Board type at the designated port is a PC/Xm */
 191 #define PCXE_TYPE 3     /* Board type at the designated port is a PC/Xe */
 192 #define MCXI_TYPE 4     /* Board type at the designated port is a MC/Xi */
 193 #define COMXI_TYPE 5     /* Board type at the designated port is a COM/Xi */
 194
 195                          /* Non-Zero Result codes. */
 196 #define RESULT_NOBDFND 1 /* A Digi product at that port is not config installed */
 197 #define RESULT_NODESCT 2 /* A memory descriptor was not obtainable */
 198 #define RESULT_NOOSSIG 3 /* FEP/OS signature was not detected on the board */
 199 #define RESULT_TOOSML  4 /* Too small an area to shrink.  */
 200 #define RESULT_NOCHAN  5 /* Channel structure for the board was not found */
 201
 202 struct shrink_buf_struct {
 203         unsigned long   shrink_buf_vaddr;       /* Virtual address of board */
 204         unsigned long   shrink_buf_phys;        /* Physical address of board */
 205         unsigned long   shrink_buf_bseg;        /* Amount of board memory */
 206         unsigned long   shrink_buf_hseg;        /* '186 Beginning of Dual-Port */
 207
 208         unsigned long   shrink_buf_lseg;        /* '186 Beginning of freed memory                                               */
 209         unsigned long   shrink_buf_mseg;        /* Linear address from start of
 210                                                    dual-port were freed memory
 211                                                    begins, host viewpoint. */
 212
 213         unsigned long   shrink_buf_bdparam;     /* Parameter for xxmemon and
 214                                                    xxmemoff */
 215
 216         unsigned long   shrink_buf_reserva;     /* Reserved */
 217         unsigned long   shrink_buf_reservb;     /* Reserved */
 218         unsigned long   shrink_buf_reservc;     /* Reserved */
 219         unsigned long   shrink_buf_reservd;     /* Reserved */
 220
 221         unsigned char   shrink_buf_result;      /* Reason for call failing
 222                                                    Zero is Good return */
 223         unsigned char   shrink_buf_init;        /* Non-Zero if it caused an
 224                                                    xxinit call. */
 225
 226         unsigned char   shrink_buf_anports;     /* Number of async ports  */
 227         unsigned char   shrink_buf_snports;     /* Number of sync  ports */
 228         unsigned char   shrink_buf_type;        /* Board type 1 = PC/Xi,
 229                                                               2 = PC/Xm,
 230                                                               3 = PC/Xe
 231                                                               4 = MC/Xi
 232                                                               5 = COMX/i */
 233         unsigned char   shrink_buf_card;        /* Card number */
 234
 235 };
 236
 237 /************************************************************************
 238  * Structure to get driver status information
 239  ************************************************************************/
 240 struct digi_dinfo {
 241         unsigned long   dinfo_nboards;          /* # boards configured  */
 242         char            dinfo_reserved[12];     /* for future expansion */
 243         char            dinfo_version[16];      /* driver version       */
 244 };
 245
 246 #define DIGI_GETDD      ('d'<<8) | 248          /* get driver info      */
 247
 248 /************************************************************************
 249  * Structure used with ioctl commands for per-board information
 250  *
 251  * physsize and memsize differ when board has "windowed" memory
 252  ************************************************************************/
 253 struct digi_info {
 254         unsigned long   info_bdnum;             /* Board number (0 based)  */
 255         unsigned long   info_ioport;            /* io port address         */
 256         unsigned long   info_physaddr;          /* memory address          */
 257         unsigned long   info_physsize;          /* Size of host mem window */
 258         unsigned long   info_memsize;           /* Amount of dual-port mem */
 259                                                 /* on board                */
 260         unsigned short  info_bdtype;            /* Board type              */
 261         unsigned short  info_nports;            /* number of ports         */
 262         char            info_bdstate;           /* board state             */
 263         char            info_reserved[7];       /* for future expansion    */
 264 };
 265
 266 #define DIGI_GETBD      ('d'<<8) | 249          /* get board info          */
 267
 268 struct digi_stat {
 269         unsigned int    info_chan;              /* Channel number (0 based)  */
 270         unsigned int    info_brd;               /* Board number (0 based)  */
 271         unsigned long   info_cflag;             /* cflag for channel       */
 272         unsigned long   info_iflag;             /* iflag for channel       */
 273         unsigned long   info_oflag;             /* oflag for channel       */
 274         unsigned long   info_mstat;             /* mstat for channel       */
 275         unsigned long   info_tx_data;           /* tx_data for channel       */
 276         unsigned long   info_rx_data;           /* rx_data for channel       */
 277         unsigned long   info_hflow;             /* hflow for channel       */
 278         unsigned long   info_reserved[8];       /* for future expansion    */
 279 };
 280
 281 #define DIGI_GETSTAT    ('d'<<8) | 244          /* get board info          */
 282 /************************************************************************
 283  *
 284  * Structure used with ioctl commands for per-channel information
 285  *
 286  ************************************************************************/
 287 struct digi_ch {
 288         unsigned long   info_bdnum;             /* Board number (0 based)  */
 289         unsigned long   info_channel;           /* Channel index number    */
 290         unsigned long   info_ch_cflag;          /* Channel cflag           */
 291         unsigned long   info_ch_iflag;          /* Channel iflag           */
 292         unsigned long   info_ch_oflag;          /* Channel oflag           */
 293         unsigned long   info_chsize;            /* Channel structure size  */
 294         unsigned long   info_sleep_stat;        /* sleep status            */
 295         dev_t           info_dev;               /* device number           */
 296         unsigned char   info_initstate;         /* Channel init state      */
 297         unsigned char   info_running;           /* Channel running state   */
 298         long            reserved[8];            /* reserved for future use */
 299 };
 300
 301 /*
 302 * This structure is used with the DIGI_FEPCMD ioctl to
 303 * tell the driver which port to send the command for.
 304 */
 305 struct digi_cmd {
 306         int     cmd;
 307         int     word;
 308         int     ncmds;
 309         int     chan; /* channel index (zero based) */
 310         int     bdid; /* board index (zero based) */
 311 };
 312
 313 /*
 314 *  info_sleep_stat defines
 315 */
 316 #define INFO_RUNWAIT    0x0001
 317 #define INFO_WOPEN      0x0002
 318 #define INFO_TTIOW      0x0004
 319 #define INFO_CH_RWAIT   0x0008
 320 #define INFO_CH_WEMPTY  0x0010
 321 #define INFO_CH_WLOW    0x0020
 322 #define INFO_XXBUF_BUSY 0x0040
 323
 324 #define DIGI_GETCH      ('d'<<8) | 245          /* get board info          */
 325
 326 /* Board type definitions */
 327
 328 #define SUBTYPE         0007
 329 #define T_PCXI          0000
 330 #define T_PCXM          0001
 331 #define T_PCXE          0002
 332 #define T_PCXR          0003
 333 #define T_SP            0004
 334 #define T_SP_PLUS       0005
 335 #       define T_HERC   0000
 336 #       define T_HOU    0001
 337 #       define T_LON    0002
 338 #       define T_CHA    0003
 339 #define FAMILY          0070
 340 #define T_COMXI         0000
 341 #define T_PCXX          0010
 342 #define T_CX            0020
 343 #define T_EPC           0030
 344 #define T_PCLITE        0040
 345 #define T_SPXX          0050
 346 #define T_AVXX          0060
 347 #define T_DXB           0070
 348 #define T_A2K_4_8       0070
 349 #define BUSTYPE         0700
 350 #define T_ISABUS        0000
 351 #define T_MCBUS         0100
 352 #define T_EISABUS       0200
 353 #define T_PCIBUS        0400
 354
 355 /* Board State Definitions */
 356
 357 #define BD_RUNNING      0x0
 358 #define BD_REASON       0x7f
 359 #define BD_NOTFOUND     0x1
 360 #define BD_NOIOPORT     0x2
 361 #define BD_NOMEM        0x3
 362 #define BD_NOBIOS       0x4
 363 #define BD_NOFEP        0x5
 364 #define BD_FAILED       0x6
 365 #define BD_ALLOCATED    0x7
 366 #define BD_TRIBOOT      0x8
 367 #define BD_BADKME       0x80
 368
 369 #define DIGI_LOOPBACK         ('d'<<8) | 252            /* Enable/disable UART internal loopback */
 370 #define DIGI_SPOLL            ('d'<<8) | 254            /* change poller rate   */
 371
 372 #define DIGI_SETCUSTOMBAUD      _IOW('e', 106, int)     /* Set integer baud rate */
 373 #define DIGI_GETCUSTOMBAUD      _IOR('e', 107, int)     /* Get integer baud rate */
 374 #define DIGI_RESET_PORT         ('e'<<8) | 93           /* Reset port           */
 375
 376 #endif /* DIGI_H */