PM / sleep: Asynchronous threads for suspend_noirq
[linux/fpc-iii.git] / drivers / staging / fwserial / fwserial.h
blob54f7f9b9b2123a120a48595a878723b5d89d465e
1 #ifndef _FIREWIRE_FWSERIAL_H
2 #define _FIREWIRE_FWSERIAL_H
4 #include <linux/kernel.h>
5 #include <linux/tty.h>
6 #include <linux/tty_driver.h>
7 #include <linux/tty_flip.h>
8 #include <linux/list.h>
9 #include <linux/firewire.h>
10 #include <linux/firewire-constants.h>
11 #include <linux/spinlock.h>
12 #include <linux/rcupdate.h>
13 #include <linux/mutex.h>
14 #include <linux/serial.h>
15 #include <linux/serial_reg.h>
16 #include <linux/module.h>
17 #include <linux/seq_file.h>
18 #include <linux/debugfs.h>
20 #include "dma_fifo.h"
22 #ifdef FWTTY_PROFILING
23 #define DISTRIBUTION_MAX_SIZE 8192
24 #define DISTRIBUTION_MAX_INDEX (ilog2(DISTRIBUTION_MAX_SIZE) + 1)
25 static inline void fwtty_profile_data(unsigned stat[], unsigned val)
27 int n = (val) ? min(ilog2(val) + 1, DISTRIBUTION_MAX_INDEX) : 0;
28 ++stat[n];
30 #else
31 #define DISTRIBUTION_MAX_INDEX 0
32 #define fwtty_profile_data(st, n)
33 #endif
35 /* Parameters for both VIRT_CABLE_PLUG & VIRT_CABLE_PLUG_RSP mgmt codes */
36 struct virt_plug_params {
37 __be32 status_hi;
38 __be32 status_lo;
39 __be32 fifo_hi;
40 __be32 fifo_lo;
41 __be32 fifo_len;
44 struct peer_work_params {
45 union {
46 struct virt_plug_params plug_req;
50 /**
51 * fwtty_peer: structure representing local & remote unit devices
52 * @unit: unit child device of fw_device node
53 * @serial: back pointer to associated fw_serial aggregate
54 * @guid: unique 64-bit guid for this unit device
55 * @generation: most recent bus generation
56 * @node_id: most recent node_id
57 * @speed: link speed of peer (0 = S100, 2 = S400, ... 5 = S3200)
58 * @mgmt_addr: bus addr region to write mgmt packets to
59 * @status_addr: bus addr register to write line status to
60 * @fifo_addr: bus addr region to write serial output to
61 * @fifo_len: max length for single write to fifo_addr
62 * @list: link for insertion into fw_serial's peer_list
63 * @rcu: for deferring peer reclamation
64 * @lock: spinlock to synchonize changes to state & port fields
65 * @work: only one work item can be queued at any one time
66 * Note: pending work is canceled prior to removal, so this
67 * peer is valid for at least the lifetime of the work function
68 * @work_params: parameter block for work functions
69 * @timer: timer for resetting peer state if remote request times out
70 * @state: current state
71 * @connect: work item for auto-connecting
72 * @connect_retries: # of connections already attempted
73 * @port: associated tty_port (usable if state == FWSC_ATTACHED)
75 struct fwtty_peer {
76 struct fw_unit *unit;
77 struct fw_serial *serial;
78 u64 guid;
79 int generation;
80 int node_id;
81 unsigned speed;
82 int max_payload;
83 u64 mgmt_addr;
85 /* these are usable only if state == FWSC_ATTACHED */
86 u64 status_addr;
87 u64 fifo_addr;
88 int fifo_len;
90 struct list_head list;
91 struct rcu_head rcu;
93 spinlock_t lock;
94 struct work_struct work;
95 struct peer_work_params work_params;
96 struct timer_list timer;
97 int state;
98 struct delayed_work connect;
99 int connect_retries;
101 struct fwtty_port *port;
104 #define to_peer(ptr, field) (container_of(ptr, struct fwtty_peer, field))
106 /* state values for fwtty_peer.state field */
107 enum fwtty_peer_state {
108 FWPS_GONE,
109 FWPS_NOT_ATTACHED,
110 FWPS_ATTACHED,
111 FWPS_PLUG_PENDING,
112 FWPS_PLUG_RESPONDING,
113 FWPS_UNPLUG_PENDING,
114 FWPS_UNPLUG_RESPONDING,
116 FWPS_NO_MGMT_ADDR = -1,
119 #define CONNECT_RETRY_DELAY HZ
120 #define MAX_CONNECT_RETRIES 10
122 /* must be holding peer lock for these state funclets */
123 static inline void peer_set_state(struct fwtty_peer *peer, int new)
125 peer->state = new;
128 static inline struct fwtty_port *peer_revert_state(struct fwtty_peer *peer)
130 struct fwtty_port *port = peer->port;
132 peer->port = NULL;
133 peer_set_state(peer, FWPS_NOT_ATTACHED);
134 return port;
137 struct fwserial_mgmt_pkt {
138 struct {
139 __be16 len;
140 __be16 code;
141 } hdr;
142 union {
143 struct virt_plug_params plug_req;
144 struct virt_plug_params plug_rsp;
146 } __packed;
148 /* fwserial_mgmt_packet codes */
149 #define FWSC_RSP_OK 0x0000
150 #define FWSC_RSP_NACK 0x8000
151 #define FWSC_CODE_MASK 0x0fff
153 #define FWSC_VIRT_CABLE_PLUG 1
154 #define FWSC_VIRT_CABLE_UNPLUG 2
155 #define FWSC_VIRT_CABLE_PLUG_RSP 3
156 #define FWSC_VIRT_CABLE_UNPLUG_RSP 4
158 /* 1 min. plug timeout -- suitable for userland authorization */
159 #define VIRT_CABLE_PLUG_TIMEOUT (60 * HZ)
161 struct stats {
162 unsigned xchars;
163 unsigned dropped;
164 unsigned tx_stall;
165 unsigned fifo_errs;
166 unsigned sent;
167 unsigned lost;
168 unsigned throttled;
169 unsigned reads[DISTRIBUTION_MAX_INDEX + 1];
170 unsigned writes[DISTRIBUTION_MAX_INDEX + 1];
171 unsigned txns[DISTRIBUTION_MAX_INDEX + 1];
172 unsigned unthrottle[DISTRIBUTION_MAX_INDEX + 1];
175 struct fwconsole_ops {
176 void (*notify)(int code, void *data);
177 void (*stats)(struct stats *stats, void *data);
178 void (*proc_show)(struct seq_file *m, void *data);
181 /* codes for console ops notify */
182 #define FWCON_NOTIFY_ATTACH 1
183 #define FWCON_NOTIFY_DETACH 2
186 * fwtty_port: structure used to track/represent underlying tty_port
187 * @port: underlying tty_port
188 * @device: tty device
189 * @index: index into port_table for this particular port
190 * note: minor = index + minor_start assigned by tty_alloc_driver()
191 * @serial: back pointer to the containing fw_serial
192 * @rx_handler: bus address handler for unique addr region used by remotes
193 * to communicate with this port. Every port uses
194 * fwtty_port_handler() for per port transactions.
195 * @fwcon_ops: ops for attached fw_console (if any)
196 * @con_data: private data for fw_console
197 * @wait_tx: waitqueue for sleeping until writer/drain completes tx
198 * @emit_breaks: delayed work responsible for generating breaks when the
199 * break line status is active
200 * @cps : characters per second computed from the termios settings
201 * @break_last: timestamp in jiffies from last emit_breaks
202 * @hangup: work responsible for HUPing when carrier is dropped/lost
203 * @mstatus: loose virtualization of LSR/MSR
204 * bits 15..0 correspond to TIOCM_* bits
205 * bits 19..16 reserved for mctrl
206 * bit 20 OOB_TX_THROTTLE
207 * bits 23..21 reserved
208 * bits 31..24 correspond to UART_LSR_* bits
209 * @lock: spinlock for protecting concurrent access to fields below it
210 * @mctrl: loose virtualization of MCR
211 * bits 15..0 correspond to TIOCM_* bits
212 * bit 16 OOB_RX_THROTTLE
213 * bits 19..17 reserved
214 * bits 31..20 reserved for mstatus
215 * @drain: delayed work scheduled to ensure that writes are flushed.
216 * The work can race with the writer but concurrent sending is
217 * prevented with the IN_TX flag. Scheduled under lock to
218 * limit scheduling when fifo has just been drained.
219 * @tx_fifo: fifo used to store & block-up writes for dma to remote
220 * @max_payload: max bytes transmissable per dma (based on peer's max_payload)
221 * @status_mask: UART_LSR_* bitmask significant to rx (based on termios)
222 * @ignore_mask: UART_LSR_* bitmask of states to ignore (also based on termios)
223 * @break_ctl: if set, port is 'sending break' to remote
224 * @write_only: self-explanatory
225 * @overrun: previous rx was lost (partially or completely)
226 * @loopback: if set, port is in loopback mode
227 * @flags: atomic bit flags
228 * bit 0: IN_TX - gate to allow only one cpu to send from the dma fifo
229 * at a time.
230 * bit 1: STOP_TX - force tx to exit while sending
231 * @peer: rcu-pointer to associated fwtty_peer (if attached)
232 * NULL if no peer attached
233 * @icount: predefined statistics reported by the TIOCGICOUNT ioctl
234 * @stats: additional statistics reported in /proc/tty/driver/firewire_serial
236 struct fwtty_port {
237 struct tty_port port;
238 struct device *device;
239 unsigned index;
240 struct fw_serial *serial;
241 struct fw_address_handler rx_handler;
243 struct fwconsole_ops *fwcon_ops;
244 void *con_data;
246 wait_queue_head_t wait_tx;
247 struct delayed_work emit_breaks;
248 unsigned cps;
249 unsigned long break_last;
251 struct work_struct hangup;
253 unsigned mstatus;
255 spinlock_t lock;
256 unsigned mctrl;
257 struct delayed_work drain;
258 struct dma_fifo tx_fifo;
259 int max_payload;
260 unsigned status_mask;
261 unsigned ignore_mask;
262 unsigned break_ctl:1,
263 write_only:1,
264 overrun:1,
265 loopback:1;
266 unsigned long flags;
268 struct fwtty_peer __rcu *peer;
270 struct async_icount icount;
271 struct stats stats;
274 #define to_port(ptr, field) (container_of(ptr, struct fwtty_port, field))
276 /* bit #s for flags field */
277 #define IN_TX 0
278 #define STOP_TX 1
280 /* bitmasks for special mctrl/mstatus bits */
281 #define OOB_RX_THROTTLE 0x00010000
282 #define MCTRL_RSRVD 0x000e0000
283 #define OOB_TX_THROTTLE 0x00100000
284 #define MSTATUS_RSRVD 0x00e00000
286 #define MCTRL_MASK (TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | TIOCM_OUT2 | \
287 TIOCM_LOOP | OOB_RX_THROTTLE | MCTRL_RSRVD)
289 /* XXX even every 1/50th secs. may be unnecessarily accurate */
290 /* delay in jiffies between brk emits */
291 #define FREQ_BREAKS (HZ / 50)
293 /* Ports are allocated in blocks of num_ports for each fw_card */
294 #define MAX_CARD_PORTS CONFIG_FWTTY_MAX_CARD_PORTS
295 #define MAX_TOTAL_PORTS CONFIG_FWTTY_MAX_TOTAL_PORTS
297 /* tuning parameters */
298 #define FWTTY_PORT_TXFIFO_LEN 4096
299 #define FWTTY_PORT_MAX_PEND_DMA 8 /* costs a cache line per pend */
300 #define DRAIN_THRESHOLD 1024
301 #define MAX_ASYNC_PAYLOAD 4096 /* ohci-defined limit */
302 #define WRITER_MINIMUM 128
303 /* TODO: how to set watermark to AR context size? see fwtty_rx() */
304 #define HIGH_WATERMARK 32768 /* AR context is 32K */
307 * Size of bus addr region above 4GB used per port as the recv addr
308 * - must be at least as big as the MAX_ASYNC_PAYLOAD
310 #define FWTTY_PORT_RXFIFO_LEN MAX_ASYNC_PAYLOAD
313 * fw_serial: aggregate used to associate tty ports with specific fw_card
314 * @card: fw_card associated with this fw_serial device (1:1 association)
315 * @kref: reference-counted multi-port management allows delayed destroy
316 * @self: local unit device as 'peer'. Not valid until local unit device
317 * is enumerated.
318 * @list: link for insertion into fwserial_list
319 * @peer_list: list of local & remote unit devices attached to this card
320 * @ports: fixed array of tty_ports provided by this serial device
322 struct fw_serial {
323 struct fw_card *card;
324 struct kref kref;
326 struct dentry *debugfs;
327 struct fwtty_peer *self;
329 struct list_head list;
330 struct list_head peer_list;
332 struct fwtty_port *ports[MAX_CARD_PORTS];
335 #define to_serial(ptr, field) (container_of(ptr, struct fw_serial, field))
337 #define TTY_DEV_NAME "fwtty" /* ttyFW was taken */
338 static const char tty_dev_name[] = TTY_DEV_NAME;
339 static const char loop_dev_name[] = "fwloop";
341 extern struct tty_driver *fwtty_driver;
343 struct fwtty_port *fwtty_port_get(unsigned index);
344 void fwtty_port_put(struct fwtty_port *port);
346 static inline void fwtty_bind_console(struct fwtty_port *port,
347 struct fwconsole_ops *fwcon_ops,
348 void *data)
350 port->con_data = data;
351 port->fwcon_ops = fwcon_ops;
355 * Returns the max send async payload size in bytes based on the unit device
356 * link speed. Self-limiting asynchronous bandwidth (via reducing the payload)
357 * is not necessary and does not work, because
358 * 1) asynchronous traffic will absorb all available bandwidth (less that
359 * being used for isochronous traffic)
360 * 2) isochronous arbitration always wins.
362 static inline int link_speed_to_max_payload(unsigned speed)
364 /* Max async payload is 4096 - see IEEE 1394-2008 tables 6-4, 16-18 */
365 return min(512 << speed, 4096);
368 #endif /* _FIREWIRE_FWSERIAL_H */